[Intel-SIG] [Meteor Lake] Sync dependency mac80211 patches for iwlwifi driver up to v6.7 #69
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
commit a469a59 ("wifi: mac80211: add support for mld in ieee80211_chswitch_done") upstream. This allows to finalize the CSA per link. In case the switch didn't work, tear down the MLD connection. Also pass the ieee80211_bss_conf to post_channel_switch to let the driver know which link completed the switch. deepin-Intel-SIG: commit a469a59 ("wifi: mac80211: add support for mld in ieee80211_chswitch_done"). Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230828130311.3d3eacc88436.Ic2d14e2285aa1646216a56806cfd4a8d0054437c@changeid Signed-off-by: Johannes Berg <[email protected]> [ Furong Zhou: amend commit log ] Signed-off-by: Furong Zhou <[email protected]>
commit ef246a1 ("wifi: mac80211: support antenna control in injection") upstream. Support antenna control for injection by parsing the antenna radiotap field (which may be presented multiple times) and telling the driver about the resulting antenna bitmap. Of course there's no guarantee the driver will actually honour this, just like any other injection control. If misconfigured, i.e. the injected HT/VHT MCS needs more chains than antennas are configured, the bitmap is reset to zero, indicating no selection. For now this is only set up for two anntenas so we keep more free bits, but that can be trivially extended if any driver implements support for it that can deal with hardware with more antennas. deepin-Intel-SIG: commit ef246a1 ("wifi: mac80211: support antenna control in injection"). Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230920211508.f71001aa4da9.I00ccb762a806ea62bc3d728fa3a0d29f4f285eeb@changeid Signed-off-by: Johannes Berg <[email protected]> [ Furong Zhou: amend commit log ] Signed-off-by: Furong Zhou <[email protected]>
commit 00f823b ("wifi: mac80211: Rename and update IEEE80211_VIF_DISABLE_SMPS_OVERRIDE") upstream. EMLSR operation and SMPS operation cannot coexist. Thus, when EMLSR is enabled, all SMPS signaling towards the AP should be stopped (it is expected that the AP will consider SMPS to be off). Rename IEEE80211_VIF_DISABLE_SMPS_OVERRIDE to IEEE80211_VIF_EML_ACTIVE and use the flag as an indication from the driver that EMLSR is enabled. When EMLSR is enabled SMPS flows towards the AP MLD should be stopped. deepin-Intel-SIG: commit 00f823b ("wifi: mac80211: Rename and update IEEE80211_VIF_DISABLE_SMPS_OVERRIDE"). Signed-off-by: Ilan Peer <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230928172905.fb2c2f9a0645.If6df5357568abd623a081f0f33b07e63fb8bba99@changeid Signed-off-by: Johannes Berg <[email protected]> [ Furong Zhou: amend commit log ] Signed-off-by: Furong Zhou <[email protected]>
commit 271d14b ("wifi: mac80211: make mgd_protect_tdls_discover MLO-aware") upstream. Since userspace can choose now what link to establish the TDLS on, we should know on what channel to do session protection. Add a link id parameter to this callback. deepin-Intel-SIG: commit 271d14b ("wifi: mac80211: make mgd_protect_tdls_discover MLO-aware"). Signed-off-by: Miri Korenblit <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230928172905.ef12ce3eb835.If864f406cfd9e24f36a2b88fd13a37328633fcf9@changeid Signed-off-by: Johannes Berg <[email protected]> [ Furong Zhou: amend commit log ] Signed-off-by: Furong Zhou <[email protected]>
commit a1f5dcb ("wifi: mac80211: add a driver callback to add vif debugfs") upstream. Add a callback which the driver can use to add the vif debugfs. We used to have this back until commit d260ff1 ("mac80211: remove vif debugfs driver callbacks") where we thought that it will be easier to just add them during interface add/remove. However, now with multi-link, we want to have proper debugfs for drivers for multi-link where some files might be in the netdev for non-MLO connections, and in the links for MLO ones, so we need to do some reconstruction when switching the mode. Moving to this new call enables that and MLO drivers will have to use it for proper debugfs operation. deepin-Intel-SIG: commit a1f5dcb ("wifi: mac80211: add a driver callback to add vif debugfs"). Signed-off-by: Miri Korenblit <[email protected]> Signed-off-by: Johannes Berg <[email protected]> [ Furong Zhou: amend commit log ] Signed-off-by: Furong Zhou <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230928172905.ac38913f6ab7.Iee731d746bb08fcc628fa776f337016a12dc62ac@changeid Signed-off-by: Johannes Berg <[email protected]>
commit 041a74c ("wifi: mac80211: Notify the low level driver on change in MLO valid links") upstream. Notify the low level driver when there is change in the valid links. deepin-Intel-SIG: commit 041a74c ("wifi: mac80211: Notify the low level driver on change in MLO valid links"). Signed-off-by: Ilan Peer <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230920211508.4fc85b0a51b0.I64238e0e892709a2bd4764b3bca93cdcf021e2fd@changeid Signed-off-by: Johannes Berg <[email protected]> [ Furong Zhou: amend commit log ] Signed-off-by: Furong Zhou <[email protected]>
commit e433304 ("wifi: mac80211: Check if we had first beacon with relevant links") upstream. If there is a disassoc before the fisrt beacon we need to protect a session for the deauth frame. Currently we are checking if we had a beacon in the default link, which is wrong in a MLO connection and link id != 0. Fix this by checking all the active links, if none had a beacon then protect a session. If at least one link had a beacon there is no need for session protection. deepin-Intel-SIG: commit e433304 ("wifi: mac80211: Check if we had first beacon with relevant links"). Signed-off-by: Miri Korenblit <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20231004120820.d290f0ab77b0.Ic1505cf3d60f74580d31efa7e52046947c490b85@changeid Signed-off-by: Johannes Berg <[email protected]> [ Furong Zhou: amend commit log ] Signed-off-by: Furong Zhou <[email protected]>
commit e76f3b4 ("wifi: mac80211: add link id to mgd_prepare_tx()") upstream. As we are moving to MLO and links terms, also the airtime protection will be done for a link rather than for a vif. Thus, some drivers will need to know for which link to protect airtime. Add link id as a parameter to the mgd_prepare_tx() callback. deepin-Intel-SIG: commit e76f3b4 ("wifi: mac80211: add link id to mgd_prepare_tx()"). Signed-off-by: Miri Korenblit <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230928172905.c7fc59a6780b.Ic88a5037d31e184a2dce0b031ece1a0a93a3a9da@changeid Signed-off-by: Johannes Berg <[email protected]> [ Furong Zhou: amend commit log ] Signed-off-by: Furong Zhou <[email protected]>
…kb() commit 2703bc8 ("wifi: mac80211: rename ieee80211_tx_status() to ieee80211_tx_status_skb()") upstream. make htmldocs warns: Documentation/driver-api/80211/mac80211:109: ./include/net/mac80211.h:5170: WARNING: Duplicate C declaration, also defined at mac80211:1117. Declaration is '.. c:function:: void ieee80211_tx_status (struct ieee80211_hw *hw, struct sk_buff *skb)'. This is because there's a function named ieee80211_tx_status() and a struct named ieee80211_tx_status. This has been discussed previously but no solution found: https://lore.kernel.org/all/[email protected]/ There's also a bug open for three years with no solution in sight: sphinx-doc/sphinx#8313 So I guess we have no other solution than to a workaround this in the code, for example to rename the function to ieee80211_tx_status_skb() to avoid the name conflict. I got the idea for the name from ieee80211_tx_status_noskb() in which the skb is not provided as an argument, instead with ieee80211_tx_status_skb() the skb is provided. Compile tested only. deepin-Intel-SIG: commit 2703bc8 ("wifi: mac80211: rename ieee80211_tx_status() to ieee80211_tx_status_skb()"). Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]> [ Furong Zhou: amend commit log ] Signed-off-by: Furong Zhou <[email protected]>
commit e8c1841 ("wifi: cfg80211: annotate iftype_data pointer with sparse") upstream. There were are a number of cases in mac80211 and iwlwifi (at least) that used the sband->iftype_data pointer directly, instead of using the accessors to find the right array entry to use. Make sparse warn when such a thing is done. To not have a lot of casts, add two helper functions/macros - ieee80211_set_sband_iftype_data() - for_each_sband_iftype_data() deepin-Intel-SIG: commit e8c1841 ("wifi: cfg80211: annotate iftype_data pointer with sparse"). Signed-off-by: Johannes Berg <[email protected]> [ Furong Zhou: amend commit log ] Signed-off-by: Furong Zhou <[email protected]>
|
Hi @zhoufuro. Thanks for your PR. I'm waiting for a deepin-community member to verify that this patch is reasonable to test. If it is, they should reply with Once the patch is verified, the new status will be reflected by the I understand the commands that are listed here. Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes/test-infra repository. |
|
[APPROVALNOTIFIER] This PR is NOT APPROVED This pull-request has been approved by: The full list of commands accepted by this bot can be found here.
Needs approval from an approver in each of these files:
Approvers can indicate their approval by writing |
Avenger-285714
pushed a commit
that referenced
this pull request
Aug 16, 2024
[ Upstream commit 7015843 ] Alexei reported that send_signal test may fail with nested CONFIG_PARAVIRT configs. In this particular case, the base VM is AMD with 166 cpus, and I run selftests with regular qemu on top of that and indeed send_signal test failed. I also tried with an Intel box with 80 cpus and there is no issue. The main qemu command line includes: -enable-kvm -smp 16 -cpu host The failure log looks like: $ ./test_progs -t send_signal [ 48.501588] watchdog: BUG: soft lockup - CPU#9 stuck for 26s! [test_progs:2225] [ 48.503622] Modules linked in: bpf_testmod(O) [ 48.503622] CPU: 9 PID: 2225 Comm: test_progs Tainted: G O 6.9.0-08561-g2c1713a8f1c9-dirty #69 [ 48.507629] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 [ 48.511635] RIP: 0010:handle_softirqs+0x71/0x290 [ 48.511635] Code: [...] 10 0a 00 00 00 31 c0 65 66 89 05 d5 f4 fa 7e fb bb ff ff ff ff <49> c7 c2 cb [ 48.518527] RSP: 0018:ffffc90000310fa0 EFLAGS: 00000246 [ 48.519579] RAX: 0000000000000000 RBX: 00000000ffffffff RCX: 00000000000006e0 [ 48.522526] RDX: 0000000000000006 RSI: ffff88810791ae80 RDI: 0000000000000000 [ 48.523587] RBP: ffffc90000fabc88 R08: 00000005a0af4f7f R09: 0000000000000000 [ 48.525525] R10: 0000000561d2f29c R11: 0000000000006534 R12: 0000000000000280 [ 48.528525] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 48.528525] FS: 00007f2f2885cd00(0000) GS:ffff888237c40000(0000) knlGS:0000000000000000 [ 48.531600] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 48.535520] CR2: 00007f2f287059f0 CR3: 0000000106a28002 CR4: 00000000003706f0 [ 48.537538] Call Trace: [ 48.537538] <IRQ> [ 48.537538] ? watchdog_timer_fn+0x1cd/0x250 [ 48.539590] ? lockup_detector_update_enable+0x50/0x50 [ 48.539590] ? __hrtimer_run_queues+0xff/0x280 [ 48.542520] ? hrtimer_interrupt+0x103/0x230 [ 48.544524] ? __sysvec_apic_timer_interrupt+0x4f/0x140 [ 48.545522] ? sysvec_apic_timer_interrupt+0x3a/0x90 [ 48.547612] ? asm_sysvec_apic_timer_interrupt+0x1a/0x20 [ 48.547612] ? handle_softirqs+0x71/0x290 [ 48.547612] irq_exit_rcu+0x63/0x80 [ 48.551585] sysvec_apic_timer_interrupt+0x75/0x90 [ 48.552521] </IRQ> [ 48.553529] <TASK> [ 48.553529] asm_sysvec_apic_timer_interrupt+0x1a/0x20 [ 48.555609] RIP: 0010:finish_task_switch.isra.0+0x90/0x260 [ 48.556526] Code: [...] 9f 58 0a 00 00 48 85 db 0f 85 89 01 00 00 4c 89 ff e8 53 d9 bd 00 fb 66 90 <4d> 85 ed 74 [ 48.562524] RSP: 0018:ffffc90000fabd38 EFLAGS: 00000282 [ 48.563589] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff83385620 [ 48.563589] RDX: ffff888237c73ae4 RSI: 0000000000000000 RDI: ffff888237c6fd00 [ 48.568521] RBP: ffffc90000fabd68 R08: 0000000000000000 R09: 0000000000000000 [ 48.569528] R10: 0000000000000001 R11: 0000000000000000 R12: ffff8881009d0000 [ 48.573525] R13: ffff8881024e5400 R14: ffff88810791ae80 R15: ffff888237c6fd00 [ 48.575614] ? finish_task_switch.isra.0+0x8d/0x260 [ 48.576523] __schedule+0x364/0xac0 [ 48.577535] schedule+0x2e/0x110 [ 48.578555] pipe_read+0x301/0x400 [ 48.579589] ? destroy_sched_domains_rcu+0x30/0x30 [ 48.579589] vfs_read+0x2b3/0x2f0 [ 48.579589] ksys_read+0x8b/0xc0 [ 48.583590] do_syscall_64+0x3d/0xc0 [ 48.583590] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 48.586525] RIP: 0033:0x7f2f28703fa1 [ 48.587592] Code: [...] 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 80 3d c5 23 14 00 00 74 13 31 c0 0f 05 <48> 3d 00 f0 [ 48.593534] RSP: 002b:00007ffd90f8cf88 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 48.595589] RAX: ffffffffffffffda RBX: 00007ffd90f8d5e8 RCX: 00007f2f28703fa1 [ 48.595589] RDX: 0000000000000001 RSI: 00007ffd90f8cfb0 RDI: 0000000000000006 [ 48.599592] RBP: 00007ffd90f8d2f0 R08: 0000000000000064 R09: 0000000000000000 [ 48.602527] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [ 48.603589] R13: 00007ffd90f8d608 R14: 00007f2f288d8000 R15: 0000000000f6bdb0 [ 48.605527] </TASK> In the test, two processes are communicating through pipe. Further debugging with strace found that the above splat is triggered as read() syscall could not receive the data even if the corresponding write() syscall in another process successfully wrote data into the pipe. The failed subtest is "send_signal_perf". The corresponding perf event has sample_period 1 and config PERF_COUNT_SW_CPU_CLOCK. sample_period 1 means every overflow event will trigger a call to the BPF program. So I suspect this may overwhelm the system. So I increased the sample_period to 100,000 and the test passed. The sample_period 10,000 still has the test failed. In other parts of selftest, e.g., [1], sample_freq is used instead. So I decided to use sample_freq = 1,000 since the test can pass as well. [1] https://lore.kernel.org/bpf/[email protected]/ Reported-by: Alexei Starovoitov <[email protected]> Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Avenger-285714
pushed a commit
that referenced
this pull request
Nov 11, 2024
commit 409dc51 upstream. The flexspi on imx8ulp only has 16 LUTs, and imx8mm flexspi has 32 LUTs, so correct the compatible string here, otherwise will meet below error: [ 1.119072] ------------[ cut here ]------------ [ 1.123926] WARNING: CPU: 0 PID: 1 at drivers/spi/spi-nxp-fspi.c:855 nxp_fspi_exec_op+0xb04/0xb64 [ 1.133239] Modules linked in: [ 1.136448] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.11.0-rc6-next-20240902-00001-g131bf9439dd9 #69 [ 1.146821] Hardware name: NXP i.MX8ULP EVK (DT) [ 1.151647] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1.158931] pc : nxp_fspi_exec_op+0xb04/0xb64 [ 1.163496] lr : nxp_fspi_exec_op+0xa34/0xb64 [ 1.168060] sp : ffff80008002b2a0 [ 1.171526] x29: ffff80008002b2d0 x28: 0000000000000000 x27: 0000000000000000 [ 1.179002] x26: ffff2eb645542580 x25: ffff800080610014 x24: ffff800080610000 [ 1.186480] x23: ffff2eb645548080 x22: 0000000000000006 x21: ffff2eb6455425e0 [ 1.193956] x20: 0000000000000000 x19: ffff80008002b5e0 x18: ffffffffffffffff [ 1.201432] x17: ffff2eb644467508 x16: 0000000000000138 x15: 0000000000000002 [ 1.208907] x14: 0000000000000000 x13: ffff2eb6400d8080 x12: 00000000ffffff00 [ 1.216378] x11: 0000000000000000 x10: ffff2eb6400d8080 x9 : ffff2eb697adca80 [ 1.223850] x8 : ffff2eb697ad3cc0 x7 : 0000000100000000 x6 : 0000000000000001 [ 1.231324] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000000007a6 [ 1.238795] x2 : 0000000000000000 x1 : 00000000000001ce x0 : 00000000ffffff92 [ 1.246267] Call trace: [ 1.248824] nxp_fspi_exec_op+0xb04/0xb64 [ 1.253031] spi_mem_exec_op+0x3a0/0x430 [ 1.257139] spi_nor_read_id+0x80/0xcc [ 1.261065] spi_nor_scan+0x1ec/0xf10 [ 1.264901] spi_nor_probe+0x108/0x2fc [ 1.268828] spi_mem_probe+0x6c/0xbc [ 1.272574] spi_probe+0x84/0xe4 [ 1.275958] really_probe+0xbc/0x29c [ 1.279713] __driver_probe_device+0x78/0x12c [ 1.284277] driver_probe_device+0xd8/0x15c [ 1.288660] __device_attach_driver+0xb8/0x134 [ 1.293316] bus_for_each_drv+0x88/0xe8 [ 1.297337] __device_attach+0xa0/0x190 [ 1.301353] device_initial_probe+0x14/0x20 [ 1.305734] bus_probe_device+0xac/0xb0 [ 1.309752] device_add+0x5d0/0x790 [ 1.313408] __spi_add_device+0x134/0x204 [ 1.317606] of_register_spi_device+0x3b4/0x590 [ 1.322348] spi_register_controller+0x47c/0x754 [ 1.327181] devm_spi_register_controller+0x4c/0xa4 [ 1.332289] nxp_fspi_probe+0x1cc/0x2b0 [ 1.336307] platform_probe+0x68/0xc4 [ 1.340145] really_probe+0xbc/0x29c [ 1.343893] __driver_probe_device+0x78/0x12c [ 1.348457] driver_probe_device+0xd8/0x15c [ 1.352838] __driver_attach+0x90/0x19c [ 1.356857] bus_for_each_dev+0x7c/0xdc [ 1.360877] driver_attach+0x24/0x30 [ 1.364624] bus_add_driver+0xe4/0x208 [ 1.368552] driver_register+0x5c/0x124 [ 1.372573] __platform_driver_register+0x28/0x34 [ 1.377497] nxp_fspi_driver_init+0x1c/0x28 [ 1.381888] do_one_initcall+0x80/0x1c8 [ 1.385908] kernel_init_freeable+0x1c4/0x28c [ 1.390472] kernel_init+0x20/0x1d8 [ 1.394138] ret_from_fork+0x10/0x20 [ 1.397885] ---[ end trace 0000000000000000 ]--- [ 1.407908] ------------[ cut here ]------------ Fixes: ef89fd5 ("arm64: dts: imx8ulp: add flexspi node") Cc: [email protected] Signed-off-by: Haibo Chen <[email protected]> Signed-off-by: Shawn Guo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
opsiff
pushed a commit
that referenced
this pull request
Jan 23, 2025
commit 9860370 upstream. irq_chip functions may be called in raw spinlock context. Therefore, we must also use a raw spinlock for our own internal locking. This fixes the following lockdep splat: [ 5.349336] ============================= [ 5.353349] [ BUG: Invalid wait context ] [ 5.357361] 6.13.0-rc5+ #69 Tainted: G W [ 5.363031] ----------------------------- [ 5.367045] kworker/u17:1/44 is trying to lock: [ 5.371587] ffffff88018b02c0 (&chip->gpio_lock){....}-{3:3}, at: xgpio_irq_unmask (drivers/gpio/gpio-xilinx.c:433 (discriminator 8)) [ 5.380079] other info that might help us debug this: [ 5.385138] context-{5:5} [ 5.387762] 5 locks held by kworker/u17:1/44: [ 5.392123] #0: ffffff8800014958 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work (kernel/workqueue.c:3204) [ 5.402260] #1: ffffffc082fcbdd8 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work (kernel/workqueue.c:3205) [ 5.411528] #2: ffffff880172c900 (&dev->mutex){....}-{4:4}, at: __device_attach (drivers/base/dd.c:1006) [ 5.419929] #3: ffffff88039c8268 (request_class#2){+.+.}-{4:4}, at: __setup_irq (kernel/irq/internals.h:156 kernel/irq/manage.c:1596) [ 5.428331] #4: ffffff88039c80c8 (lock_class#2){....}-{2:2}, at: __setup_irq (kernel/irq/manage.c:1614) [ 5.436472] stack backtrace: [ 5.439359] CPU: 2 UID: 0 PID: 44 Comm: kworker/u17:1 Tainted: G W 6.13.0-rc5+ #69 [ 5.448690] Tainted: [W]=WARN [ 5.451656] Hardware name: xlnx,zynqmp (DT) [ 5.455845] Workqueue: events_unbound deferred_probe_work_func [ 5.461699] Call trace: [ 5.464147] show_stack+0x18/0x24 C [ 5.467821] dump_stack_lvl (lib/dump_stack.c:123) [ 5.471501] dump_stack (lib/dump_stack.c:130) [ 5.474824] __lock_acquire (kernel/locking/lockdep.c:4828 kernel/locking/lockdep.c:4898 kernel/locking/lockdep.c:5176) [ 5.478758] lock_acquire (arch/arm64/include/asm/percpu.h:40 kernel/locking/lockdep.c:467 kernel/locking/lockdep.c:5851 kernel/locking/lockdep.c:5814) [ 5.482429] _raw_spin_lock_irqsave (include/linux/spinlock_api_smp.h:111 kernel/locking/spinlock.c:162) [ 5.486797] xgpio_irq_unmask (drivers/gpio/gpio-xilinx.c:433 (discriminator 8)) [ 5.490737] irq_enable (kernel/irq/internals.h:236 kernel/irq/chip.c:170 kernel/irq/chip.c:439 kernel/irq/chip.c:432 kernel/irq/chip.c:345) [ 5.494060] __irq_startup (kernel/irq/internals.h:241 kernel/irq/chip.c:180 kernel/irq/chip.c:250) [ 5.497645] irq_startup (kernel/irq/chip.c:270) [ 5.501143] __setup_irq (kernel/irq/manage.c:1807) [ 5.504728] request_threaded_irq (kernel/irq/manage.c:2208) Fixes: a32c7ca ("gpio: gpio-xilinx: Add interrupt support") Signed-off-by: Sean Anderson <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> (cherry picked from commit 0b310f417457463c0e8953b4d8c029210be69d77)
opsiff
pushed a commit
that referenced
this pull request
Jan 23, 2025
commit 9860370 upstream. irq_chip functions may be called in raw spinlock context. Therefore, we must also use a raw spinlock for our own internal locking. This fixes the following lockdep splat: [ 5.349336] ============================= [ 5.353349] [ BUG: Invalid wait context ] [ 5.357361] 6.13.0-rc5+ #69 Tainted: G W [ 5.363031] ----------------------------- [ 5.367045] kworker/u17:1/44 is trying to lock: [ 5.371587] ffffff88018b02c0 (&chip->gpio_lock){....}-{3:3}, at: xgpio_irq_unmask (drivers/gpio/gpio-xilinx.c:433 (discriminator 8)) [ 5.380079] other info that might help us debug this: [ 5.385138] context-{5:5} [ 5.387762] 5 locks held by kworker/u17:1/44: [ 5.392123] #0: ffffff8800014958 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work (kernel/workqueue.c:3204) [ 5.402260] #1: ffffffc082fcbdd8 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work (kernel/workqueue.c:3205) [ 5.411528] #2: ffffff880172c900 (&dev->mutex){....}-{4:4}, at: __device_attach (drivers/base/dd.c:1006) [ 5.419929] #3: ffffff88039c8268 (request_class#2){+.+.}-{4:4}, at: __setup_irq (kernel/irq/internals.h:156 kernel/irq/manage.c:1596) [ 5.428331] #4: ffffff88039c80c8 (lock_class#2){....}-{2:2}, at: __setup_irq (kernel/irq/manage.c:1614) [ 5.436472] stack backtrace: [ 5.439359] CPU: 2 UID: 0 PID: 44 Comm: kworker/u17:1 Tainted: G W 6.13.0-rc5+ #69 [ 5.448690] Tainted: [W]=WARN [ 5.451656] Hardware name: xlnx,zynqmp (DT) [ 5.455845] Workqueue: events_unbound deferred_probe_work_func [ 5.461699] Call trace: [ 5.464147] show_stack+0x18/0x24 C [ 5.467821] dump_stack_lvl (lib/dump_stack.c:123) [ 5.471501] dump_stack (lib/dump_stack.c:130) [ 5.474824] __lock_acquire (kernel/locking/lockdep.c:4828 kernel/locking/lockdep.c:4898 kernel/locking/lockdep.c:5176) [ 5.478758] lock_acquire (arch/arm64/include/asm/percpu.h:40 kernel/locking/lockdep.c:467 kernel/locking/lockdep.c:5851 kernel/locking/lockdep.c:5814) [ 5.482429] _raw_spin_lock_irqsave (include/linux/spinlock_api_smp.h:111 kernel/locking/spinlock.c:162) [ 5.486797] xgpio_irq_unmask (drivers/gpio/gpio-xilinx.c:433 (discriminator 8)) [ 5.490737] irq_enable (kernel/irq/internals.h:236 kernel/irq/chip.c:170 kernel/irq/chip.c:439 kernel/irq/chip.c:432 kernel/irq/chip.c:345) [ 5.494060] __irq_startup (kernel/irq/internals.h:241 kernel/irq/chip.c:180 kernel/irq/chip.c:250) [ 5.497645] irq_startup (kernel/irq/chip.c:270) [ 5.501143] __setup_irq (kernel/irq/manage.c:1807) [ 5.504728] request_threaded_irq (kernel/irq/manage.c:2208) Fixes: a32c7ca ("gpio: gpio-xilinx: Add interrupt support") Signed-off-by: Sean Anderson <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> (cherry picked from commit b011165)
opsiff
pushed a commit
that referenced
this pull request
Jan 24, 2025
commit 9860370 upstream. irq_chip functions may be called in raw spinlock context. Therefore, we must also use a raw spinlock for our own internal locking. This fixes the following lockdep splat: [ 5.349336] ============================= [ 5.353349] [ BUG: Invalid wait context ] [ 5.357361] 6.13.0-rc5+ #69 Tainted: G W [ 5.363031] ----------------------------- [ 5.367045] kworker/u17:1/44 is trying to lock: [ 5.371587] ffffff88018b02c0 (&chip->gpio_lock){....}-{3:3}, at: xgpio_irq_unmask (drivers/gpio/gpio-xilinx.c:433 (discriminator 8)) [ 5.380079] other info that might help us debug this: [ 5.385138] context-{5:5} [ 5.387762] 5 locks held by kworker/u17:1/44: [ 5.392123] #0: ffffff8800014958 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work (kernel/workqueue.c:3204) [ 5.402260] #1: ffffffc082fcbdd8 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work (kernel/workqueue.c:3205) [ 5.411528] #2: ffffff880172c900 (&dev->mutex){....}-{4:4}, at: __device_attach (drivers/base/dd.c:1006) [ 5.419929] #3: ffffff88039c8268 (request_class#2){+.+.}-{4:4}, at: __setup_irq (kernel/irq/internals.h:156 kernel/irq/manage.c:1596) [ 5.428331] #4: ffffff88039c80c8 (lock_class#2){....}-{2:2}, at: __setup_irq (kernel/irq/manage.c:1614) [ 5.436472] stack backtrace: [ 5.439359] CPU: 2 UID: 0 PID: 44 Comm: kworker/u17:1 Tainted: G W 6.13.0-rc5+ #69 [ 5.448690] Tainted: [W]=WARN [ 5.451656] Hardware name: xlnx,zynqmp (DT) [ 5.455845] Workqueue: events_unbound deferred_probe_work_func [ 5.461699] Call trace: [ 5.464147] show_stack+0x18/0x24 C [ 5.467821] dump_stack_lvl (lib/dump_stack.c:123) [ 5.471501] dump_stack (lib/dump_stack.c:130) [ 5.474824] __lock_acquire (kernel/locking/lockdep.c:4828 kernel/locking/lockdep.c:4898 kernel/locking/lockdep.c:5176) [ 5.478758] lock_acquire (arch/arm64/include/asm/percpu.h:40 kernel/locking/lockdep.c:467 kernel/locking/lockdep.c:5851 kernel/locking/lockdep.c:5814) [ 5.482429] _raw_spin_lock_irqsave (include/linux/spinlock_api_smp.h:111 kernel/locking/spinlock.c:162) [ 5.486797] xgpio_irq_unmask (drivers/gpio/gpio-xilinx.c:433 (discriminator 8)) [ 5.490737] irq_enable (kernel/irq/internals.h:236 kernel/irq/chip.c:170 kernel/irq/chip.c:439 kernel/irq/chip.c:432 kernel/irq/chip.c:345) [ 5.494060] __irq_startup (kernel/irq/internals.h:241 kernel/irq/chip.c:180 kernel/irq/chip.c:250) [ 5.497645] irq_startup (kernel/irq/chip.c:270) [ 5.501143] __setup_irq (kernel/irq/manage.c:1807) [ 5.504728] request_threaded_irq (kernel/irq/manage.c:2208) Fixes: a32c7ca ("gpio: gpio-xilinx: Add interrupt support") Signed-off-by: Sean Anderson <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> (cherry picked from commit b011165)
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
all the patches has been upstream in kernel.org.