Modify ReadMe file #3

huangbibo · 2022-09-26T03:02:57Z

Briefly introduce code branch information

Signed-off-by: huangbibo <[email protected]> Change-Id: Ia5c5f90a0dda31bafbc23ec1c66d196d2e9ba1ab

shiptux · 2022-10-08T12:27:15Z

Awesome works.

[ Upstream commit 93a3319 ] The cited commit holds encap tbl lock unconditionally when setting up dests. But it may cause the following deadlock: PID: 1063722 TASK: ffffa062ca5d0000 CPU: 13 COMMAND: "handler8" #0 [ffffb14de05b7368] __schedule at ffffffffa1d5aa91 #1 [ffffb14de05b7410] schedule at ffffffffa1d5afdb #2 [ffffb14de05b7430] schedule_preempt_disabled at ffffffffa1d5b528 #3 [ffffb14de05b7440] __mutex_lock at ffffffffa1d5d6cb #4 [ffffb14de05b74e8] mutex_lock_nested at ffffffffa1d5ddeb #5 [ffffb14de05b74f8] mlx5e_tc_tun_encap_dests_set at ffffffffc12f2096 [mlx5_core] #6 [ffffb14de05b7568] post_process_attr at ffffffffc12d9fc5 [mlx5_core] #7 [ffffb14de05b75a0] mlx5e_tc_add_fdb_flow at ffffffffc12de877 [mlx5_core] #8 [ffffb14de05b75f0] __mlx5e_add_fdb_flow at ffffffffc12e0eef [mlx5_core] #9 [ffffb14de05b7660] mlx5e_tc_add_flow at ffffffffc12e12f7 [mlx5_core] #10 [ffffb14de05b76b8] mlx5e_configure_flower at ffffffffc12e1686 [mlx5_core] #11 [ffffb14de05b7720] mlx5e_rep_indr_offload at ffffffffc12e3817 [mlx5_core] #12 [ffffb14de05b7730] mlx5e_rep_indr_setup_tc_cb at ffffffffc12e388a [mlx5_core] #13 [ffffb14de05b7740] tc_setup_cb_add at ffffffffa1ab2ba8 #14 [ffffb14de05b77a0] fl_hw_replace_filter at ffffffffc0bdec2f [cls_flower] #15 [ffffb14de05b7868] fl_change at ffffffffc0be6caa [cls_flower] #16 [ffffb14de05b7908] tc_new_tfilter at ffffffffa1ab71f0 [1031218.028143] wait_for_completion+0x24/0x30 [1031218.028589] mlx5e_update_route_decap_flows+0x9a/0x1e0 [mlx5_core] [1031218.029256] mlx5e_tc_fib_event_work+0x1ad/0x300 [mlx5_core] [1031218.029885] process_one_work+0x24e/0x510 Actually no need to hold encap tbl lock if there is no encap action. Fix it by checking if encap action exists or not before holding encap tbl lock. Fixes: 37c3b9f ("net/mlx5e: Prevent encap offload when neigh update is running") Signed-off-by: Chris Mi <[email protected]> Reviewed-by: Vlad Buslov <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit e739718 ] syzkaller found zero division error [0] in div_s64_rem() called from get_cycle_time_elapsed(), where sched->cycle_time is the divisor. We have tests in parse_taprio_schedule() so that cycle_time will never be 0, and actually cycle_time is not 0 in get_cycle_time_elapsed(). The problem is that the types of divisor are different; cycle_time is s64, but the argument of div_s64_rem() is s32. syzkaller fed this input and 0x100000000 is cast to s32 to be 0. @TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME={0xc, 0x8, 0x100000000} We use s64 for cycle_time to cast it to ktime_t, so let's keep it and set max for cycle_time. While at it, we prevent overflow in setup_txtime() and add another test in parse_taprio_schedule() to check if cycle_time overflows. Also, we add a new tdc test case for this issue. [0]: divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 1 PID: 103 Comm: kworker/1:3 Not tainted 6.5.0-rc1-00330-g60cc1f7d0605 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:div_s64_rem include/linux/math64.h:42 [inline] RIP: 0010:get_cycle_time_elapsed net/sched/sch_taprio.c:223 [inline] RIP: 0010:find_entry_to_transmit+0x252/0x7e0 net/sched/sch_taprio.c:344 Code: 3c 02 00 0f 85 5e 05 00 00 48 8b 4c 24 08 4d 8b bd 40 01 00 00 48 8b 7c 24 48 48 89 c8 4c 29 f8 48 63 f7 48 99 48 89 74 24 70 <48> f7 fe 48 29 d1 48 8d 04 0f 49 89 cc 48 89 44 24 20 49 8d 85 10 RSP: 0018:ffffc90000acf260 EFLAGS: 00010206 RAX: 177450e0347560cf RBX: 0000000000000000 RCX: 177450e0347560cf RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000100000000 RBP: 0000000000000056 R08: 0000000000000000 R09: ffffed10020a0934 R10: ffff8880105049a7 R11: ffff88806cf3a520 R12: ffff888010504800 R13: ffff88800c00d800 R14: ffff8880105049a0 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88806cf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0edf84f0e8 CR3: 000000000d73c002 CR4: 0000000000770ee0 PKRU: 55555554 Call Trace: <TASK> get_packet_txtime net/sched/sch_taprio.c:508 [inline] taprio_enqueue_one+0x900/0xff0 net/sched/sch_taprio.c:577 taprio_enqueue+0x378/0xae0 net/sched/sch_taprio.c:658 dev_qdisc_enqueue+0x46/0x170 net/core/dev.c:3732 __dev_xmit_skb net/core/dev.c:3821 [inline] __dev_queue_xmit+0x1b2f/0x3000 net/core/dev.c:4169 dev_queue_xmit include/linux/netdevice.h:3088 [inline] neigh_resolve_output net/core/neighbour.c:1552 [inline] neigh_resolve_output+0x4a7/0x780 net/core/neighbour.c:1532 neigh_output include/net/neighbour.h:544 [inline] ip6_finish_output2+0x924/0x17d0 net/ipv6/ip6_output.c:135 __ip6_finish_output+0x620/0xaa0 net/ipv6/ip6_output.c:196 ip6_finish_output net/ipv6/ip6_output.c:207 [inline] NF_HOOK_COND include/linux/netfilter.h:292 [inline] ip6_output+0x206/0x410 net/ipv6/ip6_output.c:228 dst_output include/net/dst.h:458 [inline] NF_HOOK.constprop.0+0xea/0x260 include/linux/netfilter.h:303 ndisc_send_skb+0x872/0xe80 net/ipv6/ndisc.c:508 ndisc_send_ns+0xb5/0x130 net/ipv6/ndisc.c:666 addrconf_dad_work+0xc14/0x13f0 net/ipv6/addrconf.c:4175 process_one_work+0x92c/0x13a0 kernel/workqueue.c:2597 worker_thread+0x60f/0x1240 kernel/workqueue.c:2748 kthread+0x2fe/0x3f0 kernel/kthread.c:389 ret_from_fork+0x2c/0x50 arch/x86/entry/entry_64.S:308 </TASK> Modules linked in: Fixes: 4cfd577 ("taprio: Add support for txtime-assist mode") Reported-by: syzkaller <[email protected]> Signed-off-by: Kuniyuki Iwashima <[email protected]> Co-developed-by: Eric Dumazet <[email protected]> Co-developed-by: Pedro Tammela <[email protected]> Acked-by: Vinicius Costa Gomes <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit c611589 upstream. qxl_mode_dumb_create() dereferences the qobj returned by qxl_gem_object_create_with_handle(), but the handle is the only one holding a reference to it. A potential attacker could guess the returned handle value and closes it between the return of qxl_gem_object_create_with_handle() and the qobj usage, triggering a use-after-free scenario. Reproducer: int dri_fd =-1; struct drm_mode_create_dumb arg = {0}; void gem_close(int handle); void* trigger(void* ptr) { int ret; arg.width = arg.height = 0x20; arg.bpp = 32; ret = ioctl(dri_fd, DRM_IOCTL_MODE_CREATE_DUMB, &arg); if(ret) { perror("[*] DRM_IOCTL_MODE_CREATE_DUMB Failed"); exit(-1); } gem_close(arg.handle); while(1) { struct drm_mode_create_dumb args = {0}; args.width = args.height = 0x20; args.bpp = 32; ret = ioctl(dri_fd, DRM_IOCTL_MODE_CREATE_DUMB, &args); if (ret) { perror("[*] DRM_IOCTL_MODE_CREATE_DUMB Failed"); exit(-1); } printf("[*] DRM_IOCTL_MODE_CREATE_DUMB created, %d\n", args.handle); gem_close(args.handle); } return NULL; } void gem_close(int handle) { struct drm_gem_close args; args.handle = handle; int ret = ioctl(dri_fd, DRM_IOCTL_GEM_CLOSE, &args); // gem close handle if (!ret) printf("gem close handle %d\n", args.handle); } int main(void) { dri_fd= open("/dev/dri/card0", O_RDWR); printf("fd:%d\n", dri_fd); if(dri_fd == -1) return -1; pthread_t tid1; if(pthread_create(&tid1,NULL,trigger,NULL)){ perror("[*] thread_create tid1\n"); return -1; } while (1) { gem_close(arg.handle); } return 0; } This is a KASAN report: ================================================================== BUG: KASAN: slab-use-after-free in qxl_mode_dumb_create+0x3c2/0x400 linux/drivers/gpu/drm/qxl/qxl_dumb.c:69 Write of size 1 at addr ffff88801136c240 by task poc/515 CPU: 1 PID: 515 Comm: poc Not tainted 6.3.0 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-4 04/01/2014 Call Trace: <TASK> __dump_stack linux/lib/dump_stack.c:88 dump_stack_lvl+0x48/0x70 linux/lib/dump_stack.c:106 print_address_description linux/mm/kasan/report.c:319 print_report+0xd2/0x660 linux/mm/kasan/report.c:430 kasan_report+0xd2/0x110 linux/mm/kasan/report.c:536 __asan_report_store1_noabort+0x17/0x30 linux/mm/kasan/report_generic.c:383 qxl_mode_dumb_create+0x3c2/0x400 linux/drivers/gpu/drm/qxl/qxl_dumb.c:69 drm_mode_create_dumb linux/drivers/gpu/drm/drm_dumb_buffers.c:96 drm_mode_create_dumb_ioctl+0x1f5/0x2d0 linux/drivers/gpu/drm/drm_dumb_buffers.c:102 drm_ioctl_kernel+0x21d/0x430 linux/drivers/gpu/drm/drm_ioctl.c:788 drm_ioctl+0x56f/0xcc0 linux/drivers/gpu/drm/drm_ioctl.c:891 vfs_ioctl linux/fs/ioctl.c:51 __do_sys_ioctl linux/fs/ioctl.c:870 __se_sys_ioctl linux/fs/ioctl.c:856 __x64_sys_ioctl+0x13d/0x1c0 linux/fs/ioctl.c:856 do_syscall_x64 linux/arch/x86/entry/common.c:50 do_syscall_64+0x5b/0x90 linux/arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc linux/arch/x86/entry/entry_64.S:120 RIP: 0033:0x7ff5004ff5f7 Code: 00 00 00 48 8b 05 99 c8 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 69 c8 0d 00 f7 d8 64 89 01 48 RSP: 002b:00007ff500408ea8 EFLAGS: 00000286 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ff5004ff5f7 RDX: 00007ff500408ec0 RSI: 00000000c02064b2 RDI: 0000000000000003 RBP: 00007ff500408ef0 R08: 0000000000000000 R09: 000000000000002a R10: 0000000000000000 R11: 0000000000000286 R12: 00007fff1c6cdafe R13: 00007fff1c6cdaff R14: 00007ff500408fc0 R15: 0000000000802000 </TASK> Allocated by task 515: kasan_save_stack+0x38/0x70 linux/mm/kasan/common.c:45 kasan_set_track+0x25/0x40 linux/mm/kasan/common.c:52 kasan_save_alloc_info+0x1e/0x40 linux/mm/kasan/generic.c:510 ____kasan_kmalloc linux/mm/kasan/common.c:374 __kasan_kmalloc+0xc3/0xd0 linux/mm/kasan/common.c:383 kasan_kmalloc linux/./include/linux/kasan.h:196 kmalloc_trace+0x48/0xc0 linux/mm/slab_common.c:1066 kmalloc linux/./include/linux/slab.h:580 kzalloc linux/./include/linux/slab.h:720 qxl_bo_create+0x11a/0x610 linux/drivers/gpu/drm/qxl/qxl_object.c:124 qxl_gem_object_create+0xd9/0x360 linux/drivers/gpu/drm/qxl/qxl_gem.c:58 qxl_gem_object_create_with_handle+0xa1/0x180 linux/drivers/gpu/drm/qxl/qxl_gem.c:89 qxl_mode_dumb_create+0x1cd/0x400 linux/drivers/gpu/drm/qxl/qxl_dumb.c:63 drm_mode_create_dumb linux/drivers/gpu/drm/drm_dumb_buffers.c:96 drm_mode_create_dumb_ioctl+0x1f5/0x2d0 linux/drivers/gpu/drm/drm_dumb_buffers.c:102 drm_ioctl_kernel+0x21d/0x430 linux/drivers/gpu/drm/drm_ioctl.c:788 drm_ioctl+0x56f/0xcc0 linux/drivers/gpu/drm/drm_ioctl.c:891 vfs_ioctl linux/fs/ioctl.c:51 __do_sys_ioctl linux/fs/ioctl.c:870 __se_sys_ioctl linux/fs/ioctl.c:856 __x64_sys_ioctl+0x13d/0x1c0 linux/fs/ioctl.c:856 do_syscall_x64 linux/arch/x86/entry/common.c:50 do_syscall_64+0x5b/0x90 linux/arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc linux/arch/x86/entry/entry_64.S:120 Freed by task 515: kasan_save_stack+0x38/0x70 linux/mm/kasan/common.c:45 kasan_set_track+0x25/0x40 linux/mm/kasan/common.c:52 kasan_save_free_info+0x2e/0x60 linux/mm/kasan/generic.c:521 ____kasan_slab_free linux/mm/kasan/common.c:236 ____kasan_slab_free+0x180/0x1f0 linux/mm/kasan/common.c:200 __kasan_slab_free+0x12/0x30 linux/mm/kasan/common.c:244 kasan_slab_free linux/./include/linux/kasan.h:162 slab_free_hook linux/mm/slub.c:1781 slab_free_freelist_hook+0xd2/0x1a0 linux/mm/slub.c:1807 slab_free linux/mm/slub.c:3787 __kmem_cache_free+0x196/0x2d0 linux/mm/slub.c:3800 kfree+0x78/0x120 linux/mm/slab_common.c:1019 qxl_ttm_bo_destroy+0x140/0x1a0 linux/drivers/gpu/drm/qxl/qxl_object.c:49 ttm_bo_release+0x678/0xa30 linux/drivers/gpu/drm/ttm/ttm_bo.c:381 kref_put linux/./include/linux/kref.h:65 ttm_bo_put+0x50/0x80 linux/drivers/gpu/drm/ttm/ttm_bo.c:393 qxl_gem_object_free+0x3e/0x60 linux/drivers/gpu/drm/qxl/qxl_gem.c:42 drm_gem_object_free+0x5c/0x90 linux/drivers/gpu/drm/drm_gem.c:974 kref_put linux/./include/linux/kref.h:65 __drm_gem_object_put linux/./include/drm/drm_gem.h:431 drm_gem_object_put linux/./include/drm/drm_gem.h:444 qxl_gem_object_create_with_handle+0x151/0x180 linux/drivers/gpu/drm/qxl/qxl_gem.c:100 qxl_mode_dumb_create+0x1cd/0x400 linux/drivers/gpu/drm/qxl/qxl_dumb.c:63 drm_mode_create_dumb linux/drivers/gpu/drm/drm_dumb_buffers.c:96 drm_mode_create_dumb_ioctl+0x1f5/0x2d0 linux/drivers/gpu/drm/drm_dumb_buffers.c:102 drm_ioctl_kernel+0x21d/0x430 linux/drivers/gpu/drm/drm_ioctl.c:788 drm_ioctl+0x56f/0xcc0 linux/drivers/gpu/drm/drm_ioctl.c:891 vfs_ioctl linux/fs/ioctl.c:51 __do_sys_ioctl linux/fs/ioctl.c:870 __se_sys_ioctl linux/fs/ioctl.c:856 __x64_sys_ioctl+0x13d/0x1c0 linux/fs/ioctl.c:856 do_syscall_x64 linux/arch/x86/entry/common.c:50 do_syscall_64+0x5b/0x90 linux/arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc linux/arch/x86/entry/entry_64.S:120 The buggy address belongs to the object at ffff88801136c000 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 576 bytes inside of freed 1024-byte region [ffff88801136c000, ffff88801136c400) The buggy address belongs to the physical page: page:0000000089fc329b refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11368 head:0000000089fc329b order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0xfffffc0010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff) raw: 000fffffc0010200 ffff888007841dc0 dead000000000122 0000000000000000 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88801136c100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88801136c180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff88801136c200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88801136c280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88801136c300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Disabling lock debugging due to kernel taint Instead of returning a weak reference to the qxl_bo object, return the created drm_gem_object and let the caller decrement the reference count when it no longer needs it. As a convenience, if the caller is not interested in the gobj object, it can pass NULL to the parameter and the reference counting is descremented internally. The bug and the reproducer were originally found by the Zero Day Initiative project (ZDI-CAN-20940). Link: https://www.zerodayinitiative.com/ Signed-off-by: Wander Lairson Costa <[email protected]> Cc: [email protected] Reviewed-by: Dave Airlie <[email protected]> Signed-off-by: Dave Airlie <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

… via GUP-fast commit 5805192 upstream. In contrast to most other GUP code, GUP-fast common page table walking code like gup_pte_range() also handles hugetlb pages. But in contrast to other hugetlb page table walking code, it does not look at the hugetlb PTE abstraction whereby we have only a single logical hugetlb PTE per hugetlb page, even when using multiple cont-PTEs underneath -- which is for example what huge_ptep_get() abstracts. So when we have a hugetlb page that is mapped via cont-PTEs, GUP-fast might stumble over a PTE that does not map the head page of a hugetlb page -- not the first "head" PTE of such a cont mapping. Logically, the whole hugetlb page is mapped (entire_mapcount == 1), but we might end up calling gup_must_unshare() with a tail page of a hugetlb page. We only maintain a single PageAnonExclusive flag per hugetlb page (as hugetlb pages cannot get partially COW-shared), stored for the head page. That flag is clear for all tail pages. So when gup_must_unshare() ends up calling PageAnonExclusive() with a tail page of a hugetlb page: 1) With CONFIG_DEBUG_VM_PGFLAGS Stumbles over the: VM_BUG_ON_PGFLAGS(PageHuge(page) && !PageHead(page), page); For example, when executing the COW selftests with 64k hugetlb pages on arm64: [ 61.082187] page:00000000829819ff refcount:3 mapcount:1 mapping:0000000000000000 index:0x1 pfn:0x11ee11 [ 61.082842] head:0000000080f79bf7 order:4 entire_mapcount:1 nr_pages_mapped:0 pincount:2 [ 61.083384] anon flags: 0x17ffff80003000e(referenced|uptodate|dirty|head|mappedtodisk|node=0|zone=2|lastcpupid=0xfffff) [ 61.084101] page_type: 0xffffffff() [ 61.084332] raw: 017ffff800000000 fffffc00037b8401 0000000000000402 0000000200000000 [ 61.084840] raw: 0000000000000010 0000000000000000 00000000ffffffff 0000000000000000 [ 61.085359] head: 017ffff80003000e ffffd9e95b09b788 ffffd9e95b09b788 ffff0007ff63cf71 [ 61.085885] head: 0000000000000000 0000000000000002 00000003ffffffff 0000000000000000 [ 61.086415] page dumped because: VM_BUG_ON_PAGE(PageHuge(page) && !PageHead(page)) [ 61.086914] ------------[ cut here ]------------ [ 61.087220] kernel BUG at include/linux/page-flags.h:990! [ 61.087591] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP [ 61.087999] Modules linked in: ... [ 61.089404] CPU: 0 PID: 4612 Comm: cow Kdump: loaded Not tainted 6.5.0-rc4+ #3 [ 61.089917] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 61.090409] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 61.090897] pc : gup_must_unshare.part.0+0x64/0x98 [ 61.091242] lr : gup_must_unshare.part.0+0x64/0x98 [ 61.091592] sp : ffff8000825eb940 [ 61.091826] x29: ffff8000825eb940 x28: 0000000000000000 x27: fffffc00037b8440 [ 61.092329] x26: 0400000000000001 x25: 0000000000080101 x24: 0000000000080000 [ 61.092835] x23: 0000000000080100 x22: ffff0000cffb9588 x21: ffff0000c8ec6b58 [ 61.093341] x20: 0000ffffad6b1000 x19: fffffc00037b8440 x18: ffffffffffffffff [ 61.093850] x17: 2864616548656761 x16: 5021202626202965 x15: 6761702865677548 [ 61.094358] x14: 6567615028454741 x13: 2929656761702864 x12: 6165486567615021 [ 61.094858] x11: 00000000ffff7fff x10: 00000000ffff7fff x9 : ffffd9e958b7a1c0 [ 61.095359] x8 : 00000000000bffe8 x7 : c0000000ffff7fff x6 : 00000000002bffa8 [ 61.095873] x5 : ffff0008bb19e708 x4 : 0000000000000000 x3 : 0000000000000000 [ 61.096380] x2 : 0000000000000000 x1 : ffff0000cf6636c0 x0 : 0000000000000046 [ 61.096894] Call trace: [ 61.097080] gup_must_unshare.part.0+0x64/0x98 [ 61.097392] gup_pte_range+0x3a8/0x3f0 [ 61.097662] gup_pgd_range+0x1ec/0x280 [ 61.097942] lockless_pages_from_mm+0x64/0x1a0 [ 61.098258] internal_get_user_pages_fast+0xe4/0x1d0 [ 61.098612] pin_user_pages_fast+0x58/0x78 [ 61.098917] pin_longterm_test_start+0xf4/0x2b8 [ 61.099243] gup_test_ioctl+0x170/0x3b0 [ 61.099528] __arm64_sys_ioctl+0xa8/0xf0 [ 61.099822] invoke_syscall.constprop.0+0x7c/0xd0 [ 61.100160] el0_svc_common.constprop.0+0xe8/0x100 [ 61.100500] do_el0_svc+0x38/0xa0 [ 61.100736] el0_svc+0x3c/0x198 [ 61.100971] el0t_64_sync_handler+0x134/0x150 [ 61.101280] el0t_64_sync+0x17c/0x180 [ 61.101543] Code: aa1303e0 f00074c1 912b0021 97fffeb2 (d4210000) 2) Without CONFIG_DEBUG_VM_PGFLAGS Always detects "not exclusive" for passed tail pages and refuses to PIN the tail pages R/O, as gup_must_unshare() == true. GUP-fast will fallback to ordinary GUP. As ordinary GUP properly considers the logical hugetlb PTE abstraction in hugetlb_follow_page_mask(), pinning the page will succeed when looking at the PageAnonExclusive on the head page only. So the only real effect of this is that with cont-PTE hugetlb pages, we'll always fallback from GUP-fast to ordinary GUP when not working on the head page, which ends up checking the head page and do the right thing. Consequently, the cow selftests pass with cont-PTE hugetlb pages as well without CONFIG_DEBUG_VM_PGFLAGS. Note that this only applies to anon hugetlb pages that are mapped using cont-PTEs: for example 64k hugetlb pages on a 4k arm64 kernel. ... and only when R/O-pinning (FOLL_PIN) such pages that are mapped into the page table R/O using GUP-fast. On production kernels (and even most debug kernels, that don't set CONFIG_DEBUG_VM_PGFLAGS) this patch should theoretically not be required to be backported. But of course, it does not hurt. Link: https://lkml.kernel.org/r/[email protected] Fixes: a7f2266 ("mm/gup: trigger FAULT_FLAG_UNSHARE when R/O-pinning a possibly shared anonymous page") Signed-off-by: David Hildenbrand <[email protected]> Reported-by: Ryan Roberts <[email protected]> Reviewed-by: Ryan Roberts <[email protected]> Tested-by: Ryan Roberts <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: John Hubbard <[email protected]> Cc: Jason Gunthorpe <[email protected]> Cc: Peter Xu <[email protected]> Cc: Mike Kravetz <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 7962ef1 ] In 3cb4d5e ("perf trace: Free syscall tp fields in evsel->priv") it only was freeing if strcmp(evsel->tp_format->system, "syscalls") returned zero, while the corresponding initialization of evsel->priv was being performed if it was _not_ zero, i.e. if the tp system wasn't 'syscalls'. Just stop looking for that and free it if evsel->priv was set, which should be equivalent. Also use the pre-existing evsel_trace__delete() function. This resolves these leaks, detected with: $ make EXTRA_CFLAGS="-fsanitize=address" BUILD_BPF_SKEL=1 CORESIGHT=1 O=/tmp/build/perf-tools-next -C tools/perf install-bin ================================================================= ==481565==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097) #1 0x987966 in zalloc (/home/acme/bin/perf+0x987966) #2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307 #3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333 #4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458 #5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480 #6 0x540e8b in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3212 #7 0x540e8b in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891 #8 0x540e8b in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156 #9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323 #10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377 #11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421 #12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537 #13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f) Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097) #1 0x987966 in zalloc (/home/acme/bin/perf+0x987966) #2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307 #3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333 #4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458 #5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480 #6 0x540dd1 in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3205 #7 0x540dd1 in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891 #8 0x540dd1 in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156 #9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323 #10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377 #11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421 #12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537 #13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f) SUMMARY: AddressSanitizer: 80 byte(s) leaked in 2 allocation(s). [root@quaco ~]# With this we plug all leaks with "perf trace sleep 1". Fixes: 3cb4d5e ("perf trace: Free syscall tp fields in evsel->priv") Acked-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Riccardo Mancini <[email protected]> Link: https://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit ef23cb5 ] While debugging a segfault on 'perf lock contention' without an available perf.data file I noticed that it was basically calling: perf_session__delete(ERR_PTR(-1)) Resulting in: (gdb) run lock contention Starting program: /root/bin/perf lock contention [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib64/libthread_db.so.1". failed to open perf.data: No such file or directory (try 'perf record' first) Initializing perf session failed Program received signal SIGSEGV, Segmentation fault. 0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858 2858 if (!session->auxtrace) (gdb) p session $1 = (struct perf_session *) 0xffffffffffffffff (gdb) bt #0 0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858 #1 0x000000000057bb4d in perf_session__delete (session=0xffffffffffffffff) at util/session.c:300 #2 0x000000000047c421 in __cmd_contention (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2161 #3 0x000000000047dc95 in cmd_lock (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2604 #4 0x0000000000501466 in run_builtin (p=0xe597a8 <commands+552>, argc=2, argv=0x7fffffffe200) at perf.c:322 #5 0x00000000005016d5 in handle_internal_command (argc=2, argv=0x7fffffffe200) at perf.c:375 #6 0x0000000000501824 in run_argv (argcp=0x7fffffffe02c, argv=0x7fffffffe020) at perf.c:419 #7 0x0000000000501b11 in main (argc=2, argv=0x7fffffffe200) at perf.c:535 (gdb) So just set it to NULL after using PTR_ERR(session) to decode the error as perf_session__delete(NULL) is supported. The same problem was found in 'perf top' after an audit of all perf_session__new() failure handling. Fixes: 6ef81c5 ("perf session: Return error code for perf_session__new() function on failure") Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexey Budankov <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Jeremie Galarneau <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kate Stewart <[email protected]> Cc: Mamatha Inamdar <[email protected]> Cc: Mukesh Ojha <[email protected]> Cc: Nageswara R Sastry <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Shawn Landden <[email protected]> Cc: Song Liu <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Tzvetomir Stoyanov <[email protected]> Link: https://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit abaf1e0 ] While debugging a segfault on 'perf lock contention' without an available perf.data file I noticed that it was basically calling: perf_session__delete(ERR_PTR(-1)) Resulting in: (gdb) run lock contention Starting program: /root/bin/perf lock contention [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib64/libthread_db.so.1". failed to open perf.data: No such file or directory (try 'perf record' first) Initializing perf session failed Program received signal SIGSEGV, Segmentation fault. 0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858 2858 if (!session->auxtrace) (gdb) p session $1 = (struct perf_session *) 0xffffffffffffffff (gdb) bt #0 0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858 #1 0x000000000057bb4d in perf_session__delete (session=0xffffffffffffffff) at util/session.c:300 #2 0x000000000047c421 in __cmd_contention (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2161 #3 0x000000000047dc95 in cmd_lock (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2604 #4 0x0000000000501466 in run_builtin (p=0xe597a8 <commands+552>, argc=2, argv=0x7fffffffe200) at perf.c:322 #5 0x00000000005016d5 in handle_internal_command (argc=2, argv=0x7fffffffe200) at perf.c:375 #6 0x0000000000501824 in run_argv (argcp=0x7fffffffe02c, argv=0x7fffffffe020) at perf.c:419 #7 0x0000000000501b11 in main (argc=2, argv=0x7fffffffe200) at perf.c:535 (gdb) So just set it to NULL after using PTR_ERR(session) to decode the error as perf_session__delete(NULL) is supported. Fixes: eef4fee ("perf lock: Dynamically allocate lockhash_table") Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: K Prateek Nayak <[email protected]> Cc: Kan Liang <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mamatha Inamdar <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Paolo Bonzini <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Ross Zwisler <[email protected]> Cc: Sean Christopherson <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Cc: Tiezhu Yang <[email protected]> Cc: Yang Jihong <[email protected]> Link: https://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 403f0e7 ] macb_set_tx_clk() is called under a spinlock but itself calls clk_set_rate() which can sleep. This results in: | BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580 | pps pps1: new PPS source ptp1 | in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 40, name: kworker/u4:3 | preempt_count: 1, expected: 0 | RCU nest depth: 0, expected: 0 | 4 locks held by kworker/u4:3/40: | #0: ffff000003409148 | macb ff0c0000.ethernet: gem-ptp-timer ptp clock registered. | ((wq_completion)events_power_efficient){+.+.}-{0:0}, at: process_one_work+0x14c/0x51c | #1: ffff8000833cbdd8 ((work_completion)(&pl->resolve)){+.+.}-{0:0}, at: process_one_work+0x14c/0x51c | #2: ffff000004f01578 (&pl->state_mutex){+.+.}-{4:4}, at: phylink_resolve+0x44/0x4e8 | #3: ffff000004f06f50 (&bp->lock){....}-{3:3}, at: macb_mac_link_up+0x40/0x2ac | irq event stamp: 113998 | hardirqs last enabled at (113997): [<ffff800080e8503c>] _raw_spin_unlock_irq+0x30/0x64 | hardirqs last disabled at (113998): [<ffff800080e84478>] _raw_spin_lock_irqsave+0xac/0xc8 | softirqs last enabled at (113608): [<ffff800080010630>] __do_softirq+0x430/0x4e4 | softirqs last disabled at (113597): [<ffff80008001614c>] ____do_softirq+0x10/0x1c | CPU: 0 PID: 40 Comm: kworker/u4:3 Not tainted 6.5.0-11717-g9355ce8b2f50-dirty #368 | Hardware name: ... ZynqMP ... (DT) | Workqueue: events_power_efficient phylink_resolve | Call trace: | dump_backtrace+0x98/0xf0 | show_stack+0x18/0x24 | dump_stack_lvl+0x60/0xac | dump_stack+0x18/0x24 | __might_resched+0x144/0x24c | __might_sleep+0x48/0x98 | __mutex_lock+0x58/0x7b0 | mutex_lock_nested+0x24/0x30 | clk_prepare_lock+0x4c/0xa8 | clk_set_rate+0x24/0x8c | macb_mac_link_up+0x25c/0x2ac | phylink_resolve+0x178/0x4e8 | process_one_work+0x1ec/0x51c | worker_thread+0x1ec/0x3e4 | kthread+0x120/0x124 | ret_from_fork+0x10/0x20 The obvious fix is to move the call to macb_set_tx_clk() out of the protected area. This seems safe as rx and tx are both disabled anyway at this point. It is however not entirely clear what the spinlock shall protect. It could be the read-modify-write access to the NCFGR register, but this is accessed in macb_set_rx_mode() and macb_set_rxcsum_feature() as well without holding the spinlock. It could also be the register accesses done in mog_init_rings() or macb_init_buffers(), but again these functions are called without holding the spinlock in macb_hresp_error_task(). The locking seems fishy in this driver and it might deserve another look before this patch is applied. Fixes: 633e98a ("net: macb: use resolved link config in mac_link_up()") Signed-off-by: Sascha Hauer <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit af42269 ] For cases where icc_bw_set() can be called in callbaths that could deadlock against shrinker/reclaim, such as runpm resume, we need to decouple the icc locking. Introduce a new icc_bw_lock for cases where we need to serialize bw aggregation and update to decouple that from paths that require memory allocation such as node/link creation/ destruction. Fixes this lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 6.2.0-rc8-debug+ #554 Not tainted ------------------------------------------------------ ring0/132 is trying to acquire lock: ffffff80871916d0 (&gmu->lock){+.+.}-{3:3}, at: a6xx_pm_resume+0xf0/0x234 but task is already holding lock: ffffffdb5aee57e8 (dma_fence_map){++++}-{0:0}, at: msm_job_run+0x68/0x150 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #4 (dma_fence_map){++++}-{0:0}: __dma_fence_might_wait+0x74/0xc0 dma_resv_lockdep+0x1f4/0x2f4 do_one_initcall+0x104/0x2bc kernel_init_freeable+0x344/0x34c kernel_init+0x30/0x134 ret_from_fork+0x10/0x20 -> #3 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}: fs_reclaim_acquire+0x80/0xa8 slab_pre_alloc_hook.constprop.0+0x40/0x25c __kmem_cache_alloc_node+0x60/0x1cc __kmalloc+0xd8/0x100 topology_parse_cpu_capacity+0x8c/0x178 get_cpu_for_node+0x88/0xc4 parse_cluster+0x1b0/0x28c parse_cluster+0x8c/0x28c init_cpu_topology+0x168/0x188 smp_prepare_cpus+0x24/0xf8 kernel_init_freeable+0x18c/0x34c kernel_init+0x30/0x134 ret_from_fork+0x10/0x20 -> #2 (fs_reclaim){+.+.}-{0:0}: __fs_reclaim_acquire+0x3c/0x48 fs_reclaim_acquire+0x54/0xa8 slab_pre_alloc_hook.constprop.0+0x40/0x25c __kmem_cache_alloc_node+0x60/0x1cc __kmalloc+0xd8/0x100 kzalloc.constprop.0+0x14/0x20 icc_node_create_nolock+0x4c/0xc4 icc_node_create+0x38/0x58 qcom_icc_rpmh_probe+0x1b8/0x248 platform_probe+0x70/0xc4 really_probe+0x158/0x290 __driver_probe_device+0xc8/0xe0 driver_probe_device+0x44/0x100 __driver_attach+0xf8/0x108 bus_for_each_dev+0x78/0xc4 driver_attach+0x2c/0x38 bus_add_driver+0xd0/0x1d8 driver_register+0xbc/0xf8 __platform_driver_register+0x30/0x3c qnoc_driver_init+0x24/0x30 do_one_initcall+0x104/0x2bc kernel_init_freeable+0x344/0x34c kernel_init+0x30/0x134 ret_from_fork+0x10/0x20 -> #1 (icc_lock){+.+.}-{3:3}: __mutex_lock+0xcc/0x3c8 mutex_lock_nested+0x30/0x44 icc_set_bw+0x88/0x2b4 _set_opp_bw+0x8c/0xd8 _set_opp+0x19c/0x300 dev_pm_opp_set_opp+0x84/0x94 a6xx_gmu_resume+0x18c/0x804 a6xx_pm_resume+0xf8/0x234 adreno_runtime_resume+0x2c/0x38 pm_generic_runtime_resume+0x30/0x44 __rpm_callback+0x15c/0x174 rpm_callback+0x78/0x7c rpm_resume+0x318/0x524 __pm_runtime_resume+0x78/0xbc adreno_load_gpu+0xc4/0x17c msm_open+0x50/0x120 drm_file_alloc+0x17c/0x228 drm_open_helper+0x74/0x118 drm_open+0xa0/0x144 drm_stub_open+0xd4/0xe4 chrdev_open+0x1b8/0x1e4 do_dentry_open+0x2f8/0x38c vfs_open+0x34/0x40 path_openat+0x64c/0x7b4 do_filp_open+0x54/0xc4 do_sys_openat2+0x9c/0x100 do_sys_open+0x50/0x7c __arm64_sys_openat+0x28/0x34 invoke_syscall+0x8c/0x128 el0_svc_common.constprop.0+0xa0/0x11c do_el0_svc+0xac/0xbc el0_svc+0x48/0xa0 el0t_64_sync_handler+0xac/0x13c el0t_64_sync+0x190/0x194 -> #0 (&gmu->lock){+.+.}-{3:3}: __lock_acquire+0xe00/0x1060 lock_acquire+0x1e0/0x2f8 __mutex_lock+0xcc/0x3c8 mutex_lock_nested+0x30/0x44 a6xx_pm_resume+0xf0/0x234 adreno_runtime_resume+0x2c/0x38 pm_generic_runtime_resume+0x30/0x44 __rpm_callback+0x15c/0x174 rpm_callback+0x78/0x7c rpm_resume+0x318/0x524 __pm_runtime_resume+0x78/0xbc pm_runtime_get_sync.isra.0+0x14/0x20 msm_gpu_submit+0x58/0x178 msm_job_run+0x78/0x150 drm_sched_main+0x290/0x370 kthread+0xf0/0x100 ret_from_fork+0x10/0x20 other info that might help us debug this: Chain exists of: &gmu->lock --> mmu_notifier_invalidate_range_start --> dma_fence_map Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(dma_fence_map); lock(mmu_notifier_invalidate_range_start); lock(dma_fence_map); lock(&gmu->lock); *** DEADLOCK *** 2 locks held by ring0/132: #0: ffffff8087191170 (&gpu->lock){+.+.}-{3:3}, at: msm_job_run+0x64/0x150 #1: ffffffdb5aee57e8 (dma_fence_map){++++}-{0:0}, at: msm_job_run+0x68/0x150 stack backtrace: CPU: 7 PID: 132 Comm: ring0 Not tainted 6.2.0-rc8-debug+ #554 Hardware name: Google Lazor (rev1 - 2) with LTE (DT) Call trace: dump_backtrace.part.0+0xb4/0xf8 show_stack+0x20/0x38 dump_stack_lvl+0x9c/0xd0 dump_stack+0x18/0x34 print_circular_bug+0x1b4/0x1f0 check_noncircular+0x78/0xac __lock_acquire+0xe00/0x1060 lock_acquire+0x1e0/0x2f8 __mutex_lock+0xcc/0x3c8 mutex_lock_nested+0x30/0x44 a6xx_pm_resume+0xf0/0x234 adreno_runtime_resume+0x2c/0x38 pm_generic_runtime_resume+0x30/0x44 __rpm_callback+0x15c/0x174 rpm_callback+0x78/0x7c rpm_resume+0x318/0x524 __pm_runtime_resume+0x78/0xbc pm_runtime_get_sync.isra.0+0x14/0x20 msm_gpu_submit+0x58/0x178 msm_job_run+0x78/0x150 drm_sched_main+0x290/0x370 kthread+0xf0/0x100 ret_from_fork+0x10/0x20 Signed-off-by: Rob Clark <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Georgi Djakov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit c3f4309 ] Syzkaller reported a sleep in atomic context bug relating to the HASHCHK handler logic: BUG: sleeping function called from invalid context at arch/powerpc/kernel/traps.c:1518 in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 25040, name: syz-executor preempt_count: 0, expected: 0 RCU nest depth: 0, expected: 0 no locks held by syz-executor/25040. irq event stamp: 34 hardirqs last enabled at (33): [<c000000000048b38>] prep_irq_for_enabled_exit arch/powerpc/kernel/interrupt.c:56 [inline] hardirqs last enabled at (33): [<c000000000048b38>] interrupt_exit_user_prepare_main+0x148/0x600 arch/powerpc/kernel/interrupt.c:230 hardirqs last disabled at (34): [<c00000000003e6a4>] interrupt_enter_prepare+0x144/0x4f0 arch/powerpc/include/asm/interrupt.h:176 softirqs last enabled at (0): [<c000000000281954>] copy_process+0x16e4/0x4750 kernel/fork.c:2436 softirqs last disabled at (0): [<0000000000000000>] 0x0 CPU: 15 PID: 25040 Comm: syz-executor Not tainted 6.5.0-rc5-00001-g3ccdff6bb06d #3 Hardware name: IBM,9105-22A POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1040.00 (NL1040_021) hv:phyp pSeries Call Trace: [c0000000a8247ce0] [c00000000032b0e4] __might_resched+0x3b4/0x400 kernel/sched/core.c:10189 [c0000000a8247d80] [c0000000008c7dc8] __might_fault+0xa8/0x170 mm/memory.c:5853 [c0000000a8247dc0] [c00000000004160c] do_program_check+0x32c/0xb20 arch/powerpc/kernel/traps.c:1518 [c0000000a8247e50] [c000000000009b2c] program_check_common_virt+0x3bc/0x3c0 To determine if a trap was caused by a HASHCHK instruction, we inspect the user instruction that triggered the trap. However this may sleep if the page needs to be faulted in (get_user_instr() reaches __get_user(), which calls might_fault() and triggers the bug message). Move the HASHCHK handler logic to after we allow IRQs, which is fine because we are only interested in HASHCHK if it's a user space trap. Fixes: 5bcba4e ("powerpc/dexcr: Handle hashchk exception") Signed-off-by: Benjamin Gray <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit a154f5f ] The following call trace shows a deadlock issue due to recursive locking of mutex "device_mutex". First lock acquire is in target_for_each_device() and second in target_free_device(). PID: 148266 TASK: ffff8be21ffb5d00 CPU: 10 COMMAND: "iscsi_ttx" #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f #1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224 #2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee #3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7 #4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3 #5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c #6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod] #7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod] #8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f #9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583 #10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod] #11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc #12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod] #13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod] #14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod] #15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod] #16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07 #17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod] #18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod] #19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080 #20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364 Fixes: 36d4cb4 ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion") Signed-off-by: Junxiao Bi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Mike Christie <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 374012b upstream. Fix the deadlock by refactoring the MR cache cleanup flow to flush the workqueue without holding the rb_lock. This adds a race between cache cleanup and creation of new entries which we solve by denied creation of new entries after cache cleanup started. Lockdep: WARNING: possible circular locking dependency detected [ 2785.326074 ] 6.2.0-rc6_for_upstream_debug_2023_01_31_14_02 #1 Not tainted [ 2785.339778 ] ------------------------------------------------------ [ 2785.340848 ] devlink/53872 is trying to acquire lock: [ 2785.341701 ] ffff888124f8c0c8 ((work_completion)(&(&ent->dwork)->work)){+.+.}-{0:0}, at: __flush_work+0xc8/0x900 [ 2785.343403 ] [ 2785.343403 ] but task is already holding lock: [ 2785.344464 ] ffff88817e8f1260 (&dev->cache.rb_lock){+.+.}-{3:3}, at: mlx5_mkey_cache_cleanup+0x77/0x250 [mlx5_ib] [ 2785.346273 ] [ 2785.346273 ] which lock already depends on the new lock. [ 2785.346273 ] [ 2785.347720 ] [ 2785.347720 ] the existing dependency chain (in reverse order) is: [ 2785.349003 ] [ 2785.349003 ] -> #1 (&dev->cache.rb_lock){+.+.}-{3:3}: [ 2785.350160 ] __mutex_lock+0x14c/0x15c0 [ 2785.350962 ] delayed_cache_work_func+0x2d1/0x610 [mlx5_ib] [ 2785.352044 ] process_one_work+0x7c2/0x1310 [ 2785.352879 ] worker_thread+0x59d/0xec0 [ 2785.353636 ] kthread+0x28f/0x330 [ 2785.354370 ] ret_from_fork+0x1f/0x30 [ 2785.355135 ] [ 2785.355135 ] -> #0 ((work_completion)(&(&ent->dwork)->work)){+.+.}-{0:0}: [ 2785.356515 ] __lock_acquire+0x2d8a/0x5fe0 [ 2785.357349 ] lock_acquire+0x1c1/0x540 [ 2785.358121 ] __flush_work+0xe8/0x900 [ 2785.358852 ] __cancel_work_timer+0x2c7/0x3f0 [ 2785.359711 ] mlx5_mkey_cache_cleanup+0xfb/0x250 [mlx5_ib] [ 2785.360781 ] mlx5_ib_stage_pre_ib_reg_umr_cleanup+0x16/0x30 [mlx5_ib] [ 2785.361969 ] __mlx5_ib_remove+0x68/0x120 [mlx5_ib] [ 2785.362960 ] mlx5r_remove+0x63/0x80 [mlx5_ib] [ 2785.363870 ] auxiliary_bus_remove+0x52/0x70 [ 2785.364715 ] device_release_driver_internal+0x3c1/0x600 [ 2785.365695 ] bus_remove_device+0x2a5/0x560 [ 2785.366525 ] device_del+0x492/0xb80 [ 2785.367276 ] mlx5_detach_device+0x1a9/0x360 [mlx5_core] [ 2785.368615 ] mlx5_unload_one_devl_locked+0x5a/0x110 [mlx5_core] [ 2785.369934 ] mlx5_devlink_reload_down+0x292/0x580 [mlx5_core] [ 2785.371292 ] devlink_reload+0x439/0x590 [ 2785.372075 ] devlink_nl_cmd_reload+0xaef/0xff0 [ 2785.372973 ] genl_family_rcv_msg_doit.isra.0+0x1bd/0x290 [ 2785.374011 ] genl_rcv_msg+0x3ca/0x6c0 [ 2785.374798 ] netlink_rcv_skb+0x12c/0x360 [ 2785.375612 ] genl_rcv+0x24/0x40 [ 2785.376295 ] netlink_unicast+0x438/0x710 [ 2785.377121 ] netlink_sendmsg+0x7a1/0xca0 [ 2785.377926 ] sock_sendmsg+0xc5/0x190 [ 2785.378668 ] __sys_sendto+0x1bc/0x290 [ 2785.379440 ] __x64_sys_sendto+0xdc/0x1b0 [ 2785.380255 ] do_syscall_64+0x3d/0x90 [ 2785.381031 ] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 2785.381967 ] [ 2785.381967 ] other info that might help us debug this: [ 2785.381967 ] [ 2785.383448 ] Possible unsafe locking scenario: [ 2785.383448 ] [ 2785.384544 ] CPU0 CPU1 [ 2785.385383 ] ---- ---- [ 2785.386193 ] lock(&dev->cache.rb_lock); [ 2785.386940 ] lock((work_completion)(&(&ent->dwork)->work)); [ 2785.388327 ] lock(&dev->cache.rb_lock); [ 2785.389425 ] lock((work_completion)(&(&ent->dwork)->work)); [ 2785.390414 ] [ 2785.390414 ] *** DEADLOCK *** [ 2785.390414 ] [ 2785.391579 ] 6 locks held by devlink/53872: [ 2785.392341 ] #0: ffffffff84c17a50 (cb_lock){++++}-{3:3}, at: genl_rcv+0x15/0x40 [ 2785.393630 ] #1: ffff888142280218 (&devlink->lock_key){+.+.}-{3:3}, at: devlink_get_from_attrs_lock+0x12d/0x2d0 [ 2785.395324 ] #2: ffff8881422d3c38 (&dev->lock_key){+.+.}-{3:3}, at: mlx5_unload_one_devl_locked+0x4a/0x110 [mlx5_core] [ 2785.397322 ] #3: ffffffffa0e59068 (mlx5_intf_mutex){+.+.}-{3:3}, at: mlx5_detach_device+0x60/0x360 [mlx5_core] [ 2785.399231 ] #4: ffff88810e3cb0e8 (&dev->mutex){....}-{3:3}, at: device_release_driver_internal+0x8d/0x600 [ 2785.400864 ] #5: ffff88817e8f1260 (&dev->cache.rb_lock){+.+.}-{3:3}, at: mlx5_mkey_cache_cleanup+0x77/0x250 [mlx5_ib] Fixes: b958451 ("RDMA/mlx5: Change the cache structure to an RB-tree") Signed-off-by: Shay Drory <[email protected]> Signed-off-by: Michael Guralnik <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit a84fbf2 ] Generating metrics llc_code_read_mpi_demand_plus_prefetch, llc_data_read_mpi_demand_plus_prefetch, llc_miss_local_memory_bandwidth_read, llc_miss_local_memory_bandwidth_write, nllc_miss_remote_memory_bandwidth_read, memory_bandwidth_read, memory_bandwidth_write, uncore_frequency, upi_data_transmit_bw, C2_Pkg_Residency, C3_Core_Residency, C3_Pkg_Residency, C6_Core_Residency, C6_Pkg_Residency, C7_Core_Residency, C7_Pkg_Residency, UNCORE_FREQ and tma_info_system_socket_clks would trigger an address sanitizer heap-buffer-overflows on a SkylakeX. ``` ==2567752==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x5020003ed098 at pc 0x5621a816654e bp 0x7fffb55d4da0 sp 0x7fffb55d4d98 READ of size 4 at 0x5020003eee78 thread T0 #0 0x558265d6654d in aggr_cpu_id__is_empty tools/perf/util/cpumap.c:694:12 #1 0x558265c914da in perf_stat__get_aggr tools/perf/builtin-stat.c:1490:6 #2 0x558265c914da in perf_stat__get_global_cached tools/perf/builtin-stat.c:1530:9 #3 0x558265e53290 in should_skip_zero_counter tools/perf/util/stat-display.c:947:31 #4 0x558265e53290 in print_counter_aggrdata tools/perf/util/stat-display.c:985:18 #5 0x558265e51931 in print_counter tools/perf/util/stat-display.c:1110:3 #6 0x558265e51931 in evlist__print_counters tools/perf/util/stat-display.c:1571:5 #7 0x558265c8ec87 in print_counters tools/perf/builtin-stat.c:981:2 #8 0x558265c8cc71 in cmd_stat tools/perf/builtin-stat.c:2837:3 #9 0x558265bb9bd4 in run_builtin tools/perf/perf.c:323:11 #10 0x558265bb98eb in handle_internal_command tools/perf/perf.c:377:8 #11 0x558265bb9389 in run_argv tools/perf/perf.c:421:2 #12 0x558265bb9389 in main tools/perf/perf.c:537:3 ``` The issue was the use of testing a cpumap with NULL rather than using empty, as a map containing the dummy value isn't NULL and the -1 results in an empty aggr map being allocated which legitimately overflows when any member is accessed. Fixes: 8a96f45 ("perf stat: Avoid SEGV if core.cpus isn't set") Signed-off-by: Ian Rogers <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit ede72dc ] Fuzzing found that an invalid tracepoint name would create a memory leak with an address sanitizer build: ``` $ perf stat -e '*:o/' true event syntax error: '*:o/' \___ parser error Run 'perf list' for a list of valid events Usage: perf stat [<options>] [<command>] -e, --event <event> event selector. use 'perf list' to list available events ================================================================= ==59380==ERROR: LeakSanitizer: detected memory leaks Direct leak of 4 byte(s) in 2 object(s) allocated from: #0 0x7f38ac07077b in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:439 #1 0x55f2f41be73b in str util/parse-events.l:49 #2 0x55f2f41d08e8 in parse_events_lex util/parse-events.l:338 #3 0x55f2f41dc3b1 in parse_events_parse util/parse-events-bison.c:1464 #4 0x55f2f410b8b3 in parse_events__scanner util/parse-events.c:1822 #5 0x55f2f410d1b9 in __parse_events util/parse-events.c:2094 #6 0x55f2f410e57f in parse_events_option util/parse-events.c:2279 #7 0x55f2f4427b56 in get_value tools/lib/subcmd/parse-options.c:251 #8 0x55f2f4428d98 in parse_short_opt tools/lib/subcmd/parse-options.c:351 #9 0x55f2f4429d80 in parse_options_step tools/lib/subcmd/parse-options.c:539 #10 0x55f2f442acb9 in parse_options_subcommand tools/lib/subcmd/parse-options.c:654 #11 0x55f2f3ec99fc in cmd_stat tools/perf/builtin-stat.c:2501 #12 0x55f2f4093289 in run_builtin tools/perf/perf.c:322 #13 0x55f2f40937f5 in handle_internal_command tools/perf/perf.c:375 #14 0x55f2f4093bbd in run_argv tools/perf/perf.c:419 #15 0x55f2f409412b in main tools/perf/perf.c:535 SUMMARY: AddressSanitizer: 4 byte(s) leaked in 2 allocation(s). ``` Fix by adding the missing destructor. Fixes: 865582c ("perf tools: Adds the tracepoint name parsing support") Signed-off-by: Ian Rogers <[email protected]> Cc: He Kuang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit d45c4b4 ] A thread started via eg. user_mode_thread() runs in the kernel to begin with and then may later return to userspace. While it's running in the kernel it has a pt_regs at the base of its kernel stack, but that pt_regs is all zeroes. If the thread oopses in that state, it leads to an ugly stack trace with a big block of zero GPRs, as reported by Joel: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc7-00004-gf7757129e3de-dirty #3 Hardware name: IBM PowerNV (emulated by qemu) POWER9 0x4e1200 opal:v7.0 PowerNV Call Trace: [c0000000036afb00] [c0000000010dd058] dump_stack_lvl+0x6c/0x9c (unreliable) [c0000000036afb30] [c00000000013c524] panic+0x178/0x424 [c0000000036afbd0] [c000000002005100] mount_root_generic+0x250/0x324 [c0000000036afca0] [c0000000020057d0] prepare_namespace+0x2d4/0x344 [c0000000036afd20] [c0000000020049c0] kernel_init_freeable+0x358/0x3ac [c0000000036afdf0] [c0000000000111b0] kernel_init+0x30/0x1a0 [c0000000036afe50] [c00000000000debc] ret_from_kernel_user_thread+0x14/0x1c --- interrupt: 0 at 0x0 NIP: 0000000000000000 LR: 0000000000000000 CTR: 0000000000000000 REGS: c0000000036afe80 TRAP: 0000 Not tainted (6.5.0-rc7-00004-gf7757129e3de-dirty) MSR: 0000000000000000 <> CR: 00000000 XER: 00000000 CFAR: 0000000000000000 IRQMASK: 0 GPR00: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR04: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR12: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR24: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR28: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 NIP [0000000000000000] 0x0 LR [0000000000000000] 0x0 --- interrupt: 0 The all-zero pt_regs looks ugly and conveys no useful information, other than its presence. So detect that case and just show the presence of the frame by printing the interrupt marker, eg: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc3-00126-g18e9506562a0-dirty #301 Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries Call Trace: [c000000003aabb00] [c000000001143db8] dump_stack_lvl+0x6c/0x9c (unreliable) [c000000003aabb30] [c00000000014c624] panic+0x178/0x424 [c000000003aabbd0] [c0000000020050fc] mount_root_generic+0x250/0x324 [c000000003aabca0] [c0000000020057cc] prepare_namespace+0x2d4/0x344 [c000000003aabd20] [c0000000020049bc] kernel_init_freeable+0x358/0x3ac [c000000003aabdf0] [c0000000000111b0] kernel_init+0x30/0x1a0 [c000000003aabe50] [c00000000000debc] ret_from_kernel_user_thread+0x14/0x1c --- interrupt: 0 at 0x0 To avoid ever suppressing a valid pt_regs make sure the pt_regs has a zero MSR and TRAP value, and is located at the very base of the stack. Fixes: 6895dfc ("powerpc: copy_thread fill in interrupt frame marker and back chain") Reported-by: Joel Stanley <[email protected]> Reported-by: Nicholas Piggin <[email protected]> Reviewed-by: Joel Stanley <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 34c4eff ] KMSAN reported the following uninit-value access issue: ===================================================== BUG: KMSAN: uninit-value in virtio_transport_recv_pkt+0x1dfb/0x26a0 net/vmw_vsock/virtio_transport_common.c:1421 virtio_transport_recv_pkt+0x1dfb/0x26a0 net/vmw_vsock/virtio_transport_common.c:1421 vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120 process_one_work kernel/workqueue.c:2630 [inline] process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703 worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784 kthread+0x3cc/0x520 kernel/kthread.c:388 ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 Uninit was stored to memory at: virtio_transport_space_update net/vmw_vsock/virtio_transport_common.c:1274 [inline] virtio_transport_recv_pkt+0x1ee8/0x26a0 net/vmw_vsock/virtio_transport_common.c:1415 vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120 process_one_work kernel/workqueue.c:2630 [inline] process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703 worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784 kthread+0x3cc/0x520 kernel/kthread.c:388 ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 Uninit was created at: slab_post_alloc_hook+0x105/0xad0 mm/slab.h:767 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x5a2/0xaf0 mm/slub.c:3523 kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:559 __alloc_skb+0x2fd/0x770 net/core/skbuff.c:650 alloc_skb include/linux/skbuff.h:1286 [inline] virtio_vsock_alloc_skb include/linux/virtio_vsock.h:66 [inline] virtio_transport_alloc_skb+0x90/0x11e0 net/vmw_vsock/virtio_transport_common.c:58 virtio_transport_reset_no_sock net/vmw_vsock/virtio_transport_common.c:957 [inline] virtio_transport_recv_pkt+0x1279/0x26a0 net/vmw_vsock/virtio_transport_common.c:1387 vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120 process_one_work kernel/workqueue.c:2630 [inline] process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703 worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784 kthread+0x3cc/0x520 kernel/kthread.c:388 ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 CPU: 1 PID: 10664 Comm: kworker/1:5 Not tainted 6.6.0-rc3-00146-g9f3ebbef746f #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014 Workqueue: vsock-loopback vsock_loopback_work ===================================================== The following simple reproducer can cause the issue described above: int main(void) { int sock; struct sockaddr_vm addr = { .svm_family = AF_VSOCK, .svm_cid = VMADDR_CID_ANY, .svm_port = 1234, }; sock = socket(AF_VSOCK, SOCK_STREAM, 0); connect(sock, (struct sockaddr *)&addr, sizeof(addr)); return 0; } This issue occurs because the `buf_alloc` and `fwd_cnt` fields of the `struct virtio_vsock_hdr` are not initialized when a new skb is allocated in `virtio_transport_init_hdr()`. This patch resolves the issue by initializing these fields during allocation. Fixes: 71dc9ec ("virtio/vsock: replace virtio_vsock_pkt with sk_buff") Reported-and-tested-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=0c8ce1da0ac31abbadcd Signed-off-by: Shigeru Yoshida <[email protected]> Reviewed-by: Stefano Garzarella <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit a84fbf2 ] Generating metrics llc_code_read_mpi_demand_plus_prefetch, llc_data_read_mpi_demand_plus_prefetch, llc_miss_local_memory_bandwidth_read, llc_miss_local_memory_bandwidth_write, nllc_miss_remote_memory_bandwidth_read, memory_bandwidth_read, memory_bandwidth_write, uncore_frequency, upi_data_transmit_bw, C2_Pkg_Residency, C3_Core_Residency, C3_Pkg_Residency, C6_Core_Residency, C6_Pkg_Residency, C7_Core_Residency, C7_Pkg_Residency, UNCORE_FREQ and tma_info_system_socket_clks would trigger an address sanitizer heap-buffer-overflows on a SkylakeX. ``` ==2567752==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x5020003ed098 at pc 0x5621a816654e bp 0x7fffb55d4da0 sp 0x7fffb55d4d98 READ of size 4 at 0x5020003eee78 thread T0 #0 0x558265d6654d in aggr_cpu_id__is_empty tools/perf/util/cpumap.c:694:12 #1 0x558265c914da in perf_stat__get_aggr tools/perf/builtin-stat.c:1490:6 #2 0x558265c914da in perf_stat__get_global_cached tools/perf/builtin-stat.c:1530:9 #3 0x558265e53290 in should_skip_zero_counter tools/perf/util/stat-display.c:947:31 #4 0x558265e53290 in print_counter_aggrdata tools/perf/util/stat-display.c:985:18 #5 0x558265e51931 in print_counter tools/perf/util/stat-display.c:1110:3 #6 0x558265e51931 in evlist__print_counters tools/perf/util/stat-display.c:1571:5 #7 0x558265c8ec87 in print_counters tools/perf/builtin-stat.c:981:2 #8 0x558265c8cc71 in cmd_stat tools/perf/builtin-stat.c:2837:3 #9 0x558265bb9bd4 in run_builtin tools/perf/perf.c:323:11 #10 0x558265bb98eb in handle_internal_command tools/perf/perf.c:377:8 #11 0x558265bb9389 in run_argv tools/perf/perf.c:421:2 #12 0x558265bb9389 in main tools/perf/perf.c:537:3 ``` The issue was the use of testing a cpumap with NULL rather than using empty, as a map containing the dummy value isn't NULL and the -1 results in an empty aggr map being allocated which legitimately overflows when any member is accessed. Fixes: 8a96f45 ("perf stat: Avoid SEGV if core.cpus isn't set") Signed-off-by: Ian Rogers <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit ede72dc ] Fuzzing found that an invalid tracepoint name would create a memory leak with an address sanitizer build: ``` $ perf stat -e '*:o/' true event syntax error: '*:o/' \___ parser error Run 'perf list' for a list of valid events Usage: perf stat [<options>] [<command>] -e, --event <event> event selector. use 'perf list' to list available events ================================================================= ==59380==ERROR: LeakSanitizer: detected memory leaks Direct leak of 4 byte(s) in 2 object(s) allocated from: #0 0x7f38ac07077b in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:439 #1 0x55f2f41be73b in str util/parse-events.l:49 #2 0x55f2f41d08e8 in parse_events_lex util/parse-events.l:338 #3 0x55f2f41dc3b1 in parse_events_parse util/parse-events-bison.c:1464 #4 0x55f2f410b8b3 in parse_events__scanner util/parse-events.c:1822 #5 0x55f2f410d1b9 in __parse_events util/parse-events.c:2094 #6 0x55f2f410e57f in parse_events_option util/parse-events.c:2279 #7 0x55f2f4427b56 in get_value tools/lib/subcmd/parse-options.c:251 #8 0x55f2f4428d98 in parse_short_opt tools/lib/subcmd/parse-options.c:351 #9 0x55f2f4429d80 in parse_options_step tools/lib/subcmd/parse-options.c:539 #10 0x55f2f442acb9 in parse_options_subcommand tools/lib/subcmd/parse-options.c:654 #11 0x55f2f3ec99fc in cmd_stat tools/perf/builtin-stat.c:2501 #12 0x55f2f4093289 in run_builtin tools/perf/perf.c:322 #13 0x55f2f40937f5 in handle_internal_command tools/perf/perf.c:375 #14 0x55f2f4093bbd in run_argv tools/perf/perf.c:419 #15 0x55f2f409412b in main tools/perf/perf.c:535 SUMMARY: AddressSanitizer: 4 byte(s) leaked in 2 allocation(s). ``` Fix by adding the missing destructor. Fixes: 865582c ("perf tools: Adds the tracepoint name parsing support") Signed-off-by: Ian Rogers <[email protected]> Cc: He Kuang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit d45c4b4 ] A thread started via eg. user_mode_thread() runs in the kernel to begin with and then may later return to userspace. While it's running in the kernel it has a pt_regs at the base of its kernel stack, but that pt_regs is all zeroes. If the thread oopses in that state, it leads to an ugly stack trace with a big block of zero GPRs, as reported by Joel: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc7-00004-gf7757129e3de-dirty #3 Hardware name: IBM PowerNV (emulated by qemu) POWER9 0x4e1200 opal:v7.0 PowerNV Call Trace: [c0000000036afb00] [c0000000010dd058] dump_stack_lvl+0x6c/0x9c (unreliable) [c0000000036afb30] [c00000000013c524] panic+0x178/0x424 [c0000000036afbd0] [c000000002005100] mount_root_generic+0x250/0x324 [c0000000036afca0] [c0000000020057d0] prepare_namespace+0x2d4/0x344 [c0000000036afd20] [c0000000020049c0] kernel_init_freeable+0x358/0x3ac [c0000000036afdf0] [c0000000000111b0] kernel_init+0x30/0x1a0 [c0000000036afe50] [c00000000000debc] ret_from_kernel_user_thread+0x14/0x1c --- interrupt: 0 at 0x0 NIP: 0000000000000000 LR: 0000000000000000 CTR: 0000000000000000 REGS: c0000000036afe80 TRAP: 0000 Not tainted (6.5.0-rc7-00004-gf7757129e3de-dirty) MSR: 0000000000000000 <> CR: 00000000 XER: 00000000 CFAR: 0000000000000000 IRQMASK: 0 GPR00: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR04: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR12: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR24: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR28: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 NIP [0000000000000000] 0x0 LR [0000000000000000] 0x0 --- interrupt: 0 The all-zero pt_regs looks ugly and conveys no useful information, other than its presence. So detect that case and just show the presence of the frame by printing the interrupt marker, eg: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc3-00126-g18e9506562a0-dirty #301 Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries Call Trace: [c000000003aabb00] [c000000001143db8] dump_stack_lvl+0x6c/0x9c (unreliable) [c000000003aabb30] [c00000000014c624] panic+0x178/0x424 [c000000003aabbd0] [c0000000020050fc] mount_root_generic+0x250/0x324 [c000000003aabca0] [c0000000020057cc] prepare_namespace+0x2d4/0x344 [c000000003aabd20] [c0000000020049bc] kernel_init_freeable+0x358/0x3ac [c000000003aabdf0] [c0000000000111b0] kernel_init+0x30/0x1a0 [c000000003aabe50] [c00000000000debc] ret_from_kernel_user_thread+0x14/0x1c --- interrupt: 0 at 0x0 To avoid ever suppressing a valid pt_regs make sure the pt_regs has a zero MSR and TRAP value, and is located at the very base of the stack. Fixes: 6895dfc ("powerpc: copy_thread fill in interrupt frame marker and back chain") Reported-by: Joel Stanley <[email protected]> Reported-by: Nicholas Piggin <[email protected]> Reviewed-by: Joel Stanley <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>

commit dd976a9 upstream. The smp_processor_id() shouldn't be called from preemptible code. Instead use get_cpu() and put_cpu() which disables preemption in addition to getting the processor id. Enable preemption back after calling schedule_work() to make sure that the work gets scheduled on all cores other than the current core. We want to avoid a scenario where current core's stack trace is printed multiple times and one core's stack trace isn't printed because of scheduling of current task. This fixes the following bug: [ 119.143590] sysrq: Show backtrace of all active CPUs [ 119.143902] BUG: using smp_processor_id() in preemptible [00000000] code: bash/873 [ 119.144586] caller is debug_smp_processor_id+0x20/0x30 [ 119.144827] CPU: 6 PID: 873 Comm: bash Not tainted 5.10.124-dirty #3 [ 119.144861] Hardware name: QEMU QEMU Virtual Machine, BIOS 2023.05-1 07/22/2023 [ 119.145053] Call trace: [ 119.145093] dump_backtrace+0x0/0x1a0 [ 119.145122] show_stack+0x18/0x70 [ 119.145141] dump_stack+0xc4/0x11c [ 119.145159] check_preemption_disabled+0x100/0x110 [ 119.145175] debug_smp_processor_id+0x20/0x30 [ 119.145195] sysrq_handle_showallcpus+0x20/0xc0 [ 119.145211] __handle_sysrq+0x8c/0x1a0 [ 119.145227] write_sysrq_trigger+0x94/0x12c [ 119.145247] proc_reg_write+0xa8/0xe4 [ 119.145266] vfs_write+0xec/0x280 [ 119.145282] ksys_write+0x6c/0x100 [ 119.145298] __arm64_sys_write+0x20/0x30 [ 119.145315] el0_svc_common.constprop.0+0x78/0x1e4 [ 119.145332] do_el0_svc+0x24/0x8c [ 119.145348] el0_svc+0x10/0x20 [ 119.145364] el0_sync_handler+0x134/0x140 [ 119.145381] el0_sync+0x180/0x1c0 Cc: [email protected] Cc: [email protected] Fixes: 47cab6a ("debug lockups: Improve lockup detection, fix generic arch fallback") Signed-off-by: Muhammad Usama Anjum <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 807252f upstream. Running smb2.rename test from Samba smbtorture suite against a kernel built with lockdep triggers a "possible recursive locking detected" warning. This is because mnt_want_write() is called twice with no mnt_drop_write() in between: -> ksmbd_vfs_mkdir() -> ksmbd_vfs_kern_path_create() -> kern_path_create() -> filename_create() -> mnt_want_write() -> mnt_want_write() Fix this by removing the mnt_want_write/mnt_drop_write calls from vfs helpers that call kern_path_create(). Full lockdep trace below: ============================================ WARNING: possible recursive locking detected 6.6.0-rc5 #775 Not tainted -------------------------------------------- kworker/1:1/32 is trying to acquire lock: ffff888005ac83f8 (sb_writers#5){.+.+}-{0:0}, at: ksmbd_vfs_mkdir+0xe1/0x410 but task is already holding lock: ffff888005ac83f8 (sb_writers#5){.+.+}-{0:0}, at: filename_create+0xb6/0x260 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(sb_writers#5); lock(sb_writers#5); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by kworker/1:1/32: #0: ffff8880064e4138 ((wq_completion)ksmbd-io){+.+.}-{0:0}, at: process_one_work+0x40e/0x980 #1: ffff888005b0fdd0 ((work_completion)(&work->work)){+.+.}-{0:0}, at: process_one_work+0x40e/0x980 #2: ffff888005ac83f8 (sb_writers#5){.+.+}-{0:0}, at: filename_create+0xb6/0x260 #3: ffff8880057ce760 (&type->i_mutex_dir_key#3/1){+.+.}-{3:3}, at: filename_create+0x123/0x260 Cc: [email protected] Fixes: 40b268d ("ksmbd: add mnt_want_write to ksmbd vfs functions") Signed-off-by: Marios Makassikis <[email protected]> Acked-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 5a22fbc upstream. When LAN9303 is MDIO-connected two callchains exist into mdio->bus->write(): 1. switch ports 1&2 ("physical" PHYs): virtual (switch-internal) MDIO bus (lan9303_switch_ops->phy_{read|write})-> lan9303_mdio_phy_{read|write} -> mdiobus_{read|write}_nested 2. LAN9303 virtual PHY: virtual MDIO bus (lan9303_phy_{read|write}) -> lan9303_virt_phy_reg_{read|write} -> regmap -> lan9303_mdio_{read|write} If the latter functions just take mutex_lock(&sw_dev->device->bus->mdio_lock) it triggers a LOCKDEP false-positive splat. It's false-positive because the first mdio_lock in the second callchain above belongs to virtual MDIO bus, the second mdio_lock belongs to physical MDIO bus. Consequent annotation in lan9303_mdio_{read|write} as nested lock (similar to lan9303_mdio_phy_{read|write}, it's the same physical MDIO bus) prevents the following splat: WARNING: possible circular locking dependency detected 5.15.71 #1 Not tainted ------------------------------------------------------ kworker/u4:3/609 is trying to acquire lock: ffff000011531c68 (lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock){+.+.}-{3:3}, at: regmap_lock_mutex but task is already holding lock: ffff0000114c44d8 (&bus->mdio_lock){+.+.}-{3:3}, at: mdiobus_read which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&bus->mdio_lock){+.+.}-{3:3}: lock_acquire __mutex_lock mutex_lock_nested lan9303_mdio_read _regmap_read regmap_read lan9303_probe lan9303_mdio_probe mdio_probe really_probe __driver_probe_device driver_probe_device __device_attach_driver bus_for_each_drv __device_attach device_initial_probe bus_probe_device deferred_probe_work_func process_one_work worker_thread kthread ret_from_fork -> #0 (lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock){+.+.}-{3:3}: __lock_acquire lock_acquire.part.0 lock_acquire __mutex_lock mutex_lock_nested regmap_lock_mutex regmap_read lan9303_phy_read dsa_slave_phy_read __mdiobus_read mdiobus_read get_phy_device mdiobus_scan __mdiobus_register dsa_register_switch lan9303_probe lan9303_mdio_probe mdio_probe really_probe __driver_probe_device driver_probe_device __device_attach_driver bus_for_each_drv __device_attach device_initial_probe bus_probe_device deferred_probe_work_func process_one_work worker_thread kthread ret_from_fork other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&bus->mdio_lock); lock(lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock); lock(&bus->mdio_lock); lock(lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock); *** DEADLOCK *** 5 locks held by kworker/u4:3/609: #0: ffff000002842938 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work #1: ffff80000bacbd60 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work #2: ffff000007645178 (&dev->mutex){....}-{3:3}, at: __device_attach #3: ffff8000096e6e78 (dsa2_mutex){+.+.}-{3:3}, at: dsa_register_switch #4: ffff0000114c44d8 (&bus->mdio_lock){+.+.}-{3:3}, at: mdiobus_read stack backtrace: CPU: 1 PID: 609 Comm: kworker/u4:3 Not tainted 5.15.71 #1 Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace show_stack dump_stack_lvl dump_stack print_circular_bug check_noncircular __lock_acquire lock_acquire.part.0 lock_acquire __mutex_lock mutex_lock_nested regmap_lock_mutex regmap_read lan9303_phy_read dsa_slave_phy_read __mdiobus_read mdiobus_read get_phy_device mdiobus_scan __mdiobus_register dsa_register_switch lan9303_probe lan9303_mdio_probe ... Cc: [email protected] Fixes: dc70058 ("net: dsa: LAN9303: add MDIO managed mode support") Signed-off-by: Alexander Sverdlin <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit dd976a9 upstream. The smp_processor_id() shouldn't be called from preemptible code. Instead use get_cpu() and put_cpu() which disables preemption in addition to getting the processor id. Enable preemption back after calling schedule_work() to make sure that the work gets scheduled on all cores other than the current core. We want to avoid a scenario where current core's stack trace is printed multiple times and one core's stack trace isn't printed because of scheduling of current task. This fixes the following bug: [ 119.143590] sysrq: Show backtrace of all active CPUs [ 119.143902] BUG: using smp_processor_id() in preemptible [00000000] code: bash/873 [ 119.144586] caller is debug_smp_processor_id+0x20/0x30 [ 119.144827] CPU: 6 PID: 873 Comm: bash Not tainted 5.10.124-dirty #3 [ 119.144861] Hardware name: QEMU QEMU Virtual Machine, BIOS 2023.05-1 07/22/2023 [ 119.145053] Call trace: [ 119.145093] dump_backtrace+0x0/0x1a0 [ 119.145122] show_stack+0x18/0x70 [ 119.145141] dump_stack+0xc4/0x11c [ 119.145159] check_preemption_disabled+0x100/0x110 [ 119.145175] debug_smp_processor_id+0x20/0x30 [ 119.145195] sysrq_handle_showallcpus+0x20/0xc0 [ 119.145211] __handle_sysrq+0x8c/0x1a0 [ 119.145227] write_sysrq_trigger+0x94/0x12c [ 119.145247] proc_reg_write+0xa8/0xe4 [ 119.145266] vfs_write+0xec/0x280 [ 119.145282] ksys_write+0x6c/0x100 [ 119.145298] __arm64_sys_write+0x20/0x30 [ 119.145315] el0_svc_common.constprop.0+0x78/0x1e4 [ 119.145332] do_el0_svc+0x24/0x8c [ 119.145348] el0_svc+0x10/0x20 [ 119.145364] el0_sync_handler+0x134/0x140 [ 119.145381] el0_sync+0x180/0x1c0 Cc: [email protected] Cc: [email protected] Fixes: 47cab6a ("debug lockups: Improve lockup detection, fix generic arch fallback") Signed-off-by: Muhammad Usama Anjum <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 807252f upstream. Running smb2.rename test from Samba smbtorture suite against a kernel built with lockdep triggers a "possible recursive locking detected" warning. This is because mnt_want_write() is called twice with no mnt_drop_write() in between: -> ksmbd_vfs_mkdir() -> ksmbd_vfs_kern_path_create() -> kern_path_create() -> filename_create() -> mnt_want_write() -> mnt_want_write() Fix this by removing the mnt_want_write/mnt_drop_write calls from vfs helpers that call kern_path_create(). Full lockdep trace below: ============================================ WARNING: possible recursive locking detected 6.6.0-rc5 #775 Not tainted -------------------------------------------- kworker/1:1/32 is trying to acquire lock: ffff888005ac83f8 (sb_writers#5){.+.+}-{0:0}, at: ksmbd_vfs_mkdir+0xe1/0x410 but task is already holding lock: ffff888005ac83f8 (sb_writers#5){.+.+}-{0:0}, at: filename_create+0xb6/0x260 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(sb_writers#5); lock(sb_writers#5); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by kworker/1:1/32: #0: ffff8880064e4138 ((wq_completion)ksmbd-io){+.+.}-{0:0}, at: process_one_work+0x40e/0x980 #1: ffff888005b0fdd0 ((work_completion)(&work->work)){+.+.}-{0:0}, at: process_one_work+0x40e/0x980 #2: ffff888005ac83f8 (sb_writers#5){.+.+}-{0:0}, at: filename_create+0xb6/0x260 #3: ffff8880057ce760 (&type->i_mutex_dir_key#3/1){+.+.}-{3:3}, at: filename_create+0x123/0x260 Cc: [email protected] Fixes: 40b268d ("ksmbd: add mnt_want_write to ksmbd vfs functions") Signed-off-by: Marios Makassikis <[email protected]> Acked-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 5a22fbc upstream. When LAN9303 is MDIO-connected two callchains exist into mdio->bus->write(): 1. switch ports 1&2 ("physical" PHYs): virtual (switch-internal) MDIO bus (lan9303_switch_ops->phy_{read|write})-> lan9303_mdio_phy_{read|write} -> mdiobus_{read|write}_nested 2. LAN9303 virtual PHY: virtual MDIO bus (lan9303_phy_{read|write}) -> lan9303_virt_phy_reg_{read|write} -> regmap -> lan9303_mdio_{read|write} If the latter functions just take mutex_lock(&sw_dev->device->bus->mdio_lock) it triggers a LOCKDEP false-positive splat. It's false-positive because the first mdio_lock in the second callchain above belongs to virtual MDIO bus, the second mdio_lock belongs to physical MDIO bus. Consequent annotation in lan9303_mdio_{read|write} as nested lock (similar to lan9303_mdio_phy_{read|write}, it's the same physical MDIO bus) prevents the following splat: WARNING: possible circular locking dependency detected 5.15.71 #1 Not tainted ------------------------------------------------------ kworker/u4:3/609 is trying to acquire lock: ffff000011531c68 (lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock){+.+.}-{3:3}, at: regmap_lock_mutex but task is already holding lock: ffff0000114c44d8 (&bus->mdio_lock){+.+.}-{3:3}, at: mdiobus_read which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&bus->mdio_lock){+.+.}-{3:3}: lock_acquire __mutex_lock mutex_lock_nested lan9303_mdio_read _regmap_read regmap_read lan9303_probe lan9303_mdio_probe mdio_probe really_probe __driver_probe_device driver_probe_device __device_attach_driver bus_for_each_drv __device_attach device_initial_probe bus_probe_device deferred_probe_work_func process_one_work worker_thread kthread ret_from_fork -> #0 (lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock){+.+.}-{3:3}: __lock_acquire lock_acquire.part.0 lock_acquire __mutex_lock mutex_lock_nested regmap_lock_mutex regmap_read lan9303_phy_read dsa_slave_phy_read __mdiobus_read mdiobus_read get_phy_device mdiobus_scan __mdiobus_register dsa_register_switch lan9303_probe lan9303_mdio_probe mdio_probe really_probe __driver_probe_device driver_probe_device __device_attach_driver bus_for_each_drv __device_attach device_initial_probe bus_probe_device deferred_probe_work_func process_one_work worker_thread kthread ret_from_fork other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&bus->mdio_lock); lock(lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock); lock(&bus->mdio_lock); lock(lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock); *** DEADLOCK *** 5 locks held by kworker/u4:3/609: #0: ffff000002842938 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work #1: ffff80000bacbd60 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work #2: ffff000007645178 (&dev->mutex){....}-{3:3}, at: __device_attach #3: ffff8000096e6e78 (dsa2_mutex){+.+.}-{3:3}, at: dsa_register_switch #4: ffff0000114c44d8 (&bus->mdio_lock){+.+.}-{3:3}, at: mdiobus_read stack backtrace: CPU: 1 PID: 609 Comm: kworker/u4:3 Not tainted 5.15.71 #1 Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace show_stack dump_stack_lvl dump_stack print_circular_bug check_noncircular __lock_acquire lock_acquire.part.0 lock_acquire __mutex_lock mutex_lock_nested regmap_lock_mutex regmap_read lan9303_phy_read dsa_slave_phy_read __mdiobus_read mdiobus_read get_phy_device mdiobus_scan __mdiobus_register dsa_register_switch lan9303_probe lan9303_mdio_probe ... Cc: [email protected] Fixes: dc70058 ("net: dsa: LAN9303: add MDIO managed mode support") Signed-off-by: Alexander Sverdlin <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit d8b90d6 upstream. When scanning namespaces, it is possible to get valid data from the first call to nvme_identify_ns() in nvme_alloc_ns(), but not from the second call in nvme_update_ns_info_block(). In particular, if the NSID becomes inactive between the two commands, a storage device may return a buffer filled with zero as per 4.1.5.1. In this case, we can get a kernel crash due to a divide-by-zero in blk_stack_limits() because ns->lba_shift will be set to zero. PID: 326 TASK: ffff95fec3cd8000 CPU: 29 COMMAND: "kworker/u98:10" #0 [ffffad8f8702f9e0] machine_kexec at ffffffff91c76ec7 #1 [ffffad8f8702fa38] __crash_kexec at ffffffff91dea4fa #2 [ffffad8f8702faf8] crash_kexec at ffffffff91deb788 #3 [ffffad8f8702fb00] oops_end at ffffffff91c2e4bb #4 [ffffad8f8702fb20] do_trap at ffffffff91c2a4ce #5 [ffffad8f8702fb70] do_error_trap at ffffffff91c2a595 #6 [ffffad8f8702fbb0] exc_divide_error at ffffffff928506e6 #7 [ffffad8f8702fbd0] asm_exc_divide_error at ffffffff92a00926 [exception RIP: blk_stack_limits+434] RIP: ffffffff92191872 RSP: ffffad8f8702fc80 RFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff95efa0c91800 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001 RBP: 00000000ffffffff R8: ffff95fec7df35a8 R9: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff95fed33c09a8 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ffffad8f8702fce0] nvme_update_ns_info_block at ffffffffc06d3533 [nvme_core] #9 [ffffad8f8702fd18] nvme_scan_ns at ffffffffc06d6fa7 [nvme_core] This happened when the check for valid data was moved out of nvme_identify_ns() into one of the callers. Fix this by checking in both callers. Link: https://bugzilla.kernel.org/show_bug.cgi?id=218186 Fixes: 0dd6fff ("nvme: bring back auto-removal of deleted namespaces during sequential scan") Cc: [email protected] Signed-off-by: Ewan D. Milne <[email protected]> Signed-off-by: Keith Busch <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit a2e36cd ] This allows it to break the following circular locking dependency. Aug 10 07:01:29 dg1test kernel: ====================================================== Aug 10 07:01:29 dg1test kernel: WARNING: possible circular locking dependency detected Aug 10 07:01:29 dg1test kernel: 6.4.0-rc7+ #10 Not tainted Aug 10 07:01:29 dg1test kernel: ------------------------------------------------------ Aug 10 07:01:29 dg1test kernel: wireplumber/2236 is trying to acquire lock: Aug 10 07:01:29 dg1test kernel: ffff8fca5320da18 (&fctx->lock){-...}-{2:2}, at: nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: but task is already holding lock: Aug 10 07:01:29 dg1test kernel: ffff8fca41208610 (&event->list_lock#2){-...}-{2:2}, at: nvkm_event_ntfy+0x50/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: which lock already depends on the new lock. Aug 10 07:01:29 dg1test kernel: the existing dependency chain (in reverse order) is: Aug 10 07:01:29 dg1test kernel: -> #3 (&event->list_lock#2){-...}-{2:2}: Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy+0x50/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: ga100_fifo_nonstall_intr+0x24/0x30 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_intr+0x12c/0x240 [nouveau] Aug 10 07:01:29 dg1test kernel: __handle_irq_event_percpu+0x88/0x240 Aug 10 07:01:29 dg1test kernel: handle_irq_event+0x38/0x80 Aug 10 07:01:29 dg1test kernel: handle_edge_irq+0xa3/0x240 Aug 10 07:01:29 dg1test kernel: __common_interrupt+0x72/0x160 Aug 10 07:01:29 dg1test kernel: common_interrupt+0x60/0xe0 Aug 10 07:01:29 dg1test kernel: asm_common_interrupt+0x26/0x40 Aug 10 07:01:29 dg1test kernel: -> #2 (&device->intr.lock){-...}-{2:2}: Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: nvkm_inth_allow+0x2c/0x80 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_state+0x181/0x250 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_allow+0x63/0xd0 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_uevent_mthd+0x4d/0x70 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_ioctl+0x10b/0x250 [nouveau] Aug 10 07:01:29 dg1test kernel: nvif_object_mthd+0xa8/0x1f0 [nouveau] Aug 10 07:01:29 dg1test kernel: nvif_event_allow+0x2a/0xa0 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_fence_enable_signaling+0x78/0x80 [nouveau] Aug 10 07:01:29 dg1test kernel: __dma_fence_enable_signaling+0x5e/0x100 Aug 10 07:01:29 dg1test kernel: dma_fence_add_callback+0x4b/0xd0 Aug 10 07:01:29 dg1test kernel: nouveau_cli_work_queue+0xae/0x110 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_gem_object_close+0x1d1/0x2a0 [nouveau] Aug 10 07:01:29 dg1test kernel: drm_gem_handle_delete+0x70/0xe0 [drm] Aug 10 07:01:29 dg1test kernel: drm_ioctl_kernel+0xa5/0x150 [drm] Aug 10 07:01:29 dg1test kernel: drm_ioctl+0x256/0x490 [drm] Aug 10 07:01:29 dg1test kernel: nouveau_drm_ioctl+0x5a/0xb0 [nouveau] Aug 10 07:01:29 dg1test kernel: __x64_sys_ioctl+0x91/0xd0 Aug 10 07:01:29 dg1test kernel: do_syscall_64+0x3c/0x90 Aug 10 07:01:29 dg1test kernel: entry_SYSCALL_64_after_hwframe+0x72/0xdc Aug 10 07:01:29 dg1test kernel: -> #1 (&event->refs_lock#4){....}-{2:2}: Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_state+0x37/0x250 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_allow+0x63/0xd0 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_uevent_mthd+0x4d/0x70 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_ioctl+0x10b/0x250 [nouveau] Aug 10 07:01:29 dg1test kernel: nvif_object_mthd+0xa8/0x1f0 [nouveau] Aug 10 07:01:29 dg1test kernel: nvif_event_allow+0x2a/0xa0 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_fence_enable_signaling+0x78/0x80 [nouveau] Aug 10 07:01:29 dg1test kernel: __dma_fence_enable_signaling+0x5e/0x100 Aug 10 07:01:29 dg1test kernel: dma_fence_add_callback+0x4b/0xd0 Aug 10 07:01:29 dg1test kernel: nouveau_cli_work_queue+0xae/0x110 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_gem_object_close+0x1d1/0x2a0 [nouveau] Aug 10 07:01:29 dg1test kernel: drm_gem_handle_delete+0x70/0xe0 [drm] Aug 10 07:01:29 dg1test kernel: drm_ioctl_kernel+0xa5/0x150 [drm] Aug 10 07:01:29 dg1test kernel: drm_ioctl+0x256/0x490 [drm] Aug 10 07:01:29 dg1test kernel: nouveau_drm_ioctl+0x5a/0xb0 [nouveau] Aug 10 07:01:29 dg1test kernel: __x64_sys_ioctl+0x91/0xd0 Aug 10 07:01:29 dg1test kernel: do_syscall_64+0x3c/0x90 Aug 10 07:01:29 dg1test kernel: entry_SYSCALL_64_after_hwframe+0x72/0xdc Aug 10 07:01:29 dg1test kernel: -> #0 (&fctx->lock){-...}-{2:2}: Aug 10 07:01:29 dg1test kernel: __lock_acquire+0x14e3/0x2240 Aug 10 07:01:29 dg1test kernel: lock_acquire+0xc8/0x2a0 Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_client_event+0xf/0x20 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy+0x9b/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: ga100_fifo_nonstall_intr+0x24/0x30 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_intr+0x12c/0x240 [nouveau] Aug 10 07:01:29 dg1test kernel: __handle_irq_event_percpu+0x88/0x240 Aug 10 07:01:29 dg1test kernel: handle_irq_event+0x38/0x80 Aug 10 07:01:29 dg1test kernel: handle_edge_irq+0xa3/0x240 Aug 10 07:01:29 dg1test kernel: __common_interrupt+0x72/0x160 Aug 10 07:01:29 dg1test kernel: common_interrupt+0x60/0xe0 Aug 10 07:01:29 dg1test kernel: asm_common_interrupt+0x26/0x40 Aug 10 07:01:29 dg1test kernel: other info that might help us debug this: Aug 10 07:01:29 dg1test kernel: Chain exists of: &fctx->lock --> &device->intr.lock --> &event->list_lock#2 Aug 10 07:01:29 dg1test kernel: Possible unsafe locking scenario: Aug 10 07:01:29 dg1test kernel: CPU0 CPU1 Aug 10 07:01:29 dg1test kernel: ---- ---- Aug 10 07:01:29 dg1test kernel: lock(&event->list_lock#2); Aug 10 07:01:29 dg1test kernel: lock(&device->intr.lock); Aug 10 07:01:29 dg1test kernel: lock(&event->list_lock#2); Aug 10 07:01:29 dg1test kernel: lock(&fctx->lock); Aug 10 07:01:29 dg1test kernel: *** DEADLOCK *** Aug 10 07:01:29 dg1test kernel: 2 locks held by wireplumber/2236: Aug 10 07:01:29 dg1test kernel: #0: ffff8fca53177bf8 (&device->intr.lock){-...}-{2:2}, at: nvkm_intr+0x29/0x240 [nouveau] Aug 10 07:01:29 dg1test kernel: #1: ffff8fca41208610 (&event->list_lock#2){-...}-{2:2}, at: nvkm_event_ntfy+0x50/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: stack backtrace: Aug 10 07:01:29 dg1test kernel: CPU: 6 PID: 2236 Comm: wireplumber Not tainted 6.4.0-rc7+ #10 Aug 10 07:01:29 dg1test kernel: Hardware name: Gigabyte Technology Co., Ltd. Z390 I AORUS PRO WIFI/Z390 I AORUS PRO WIFI-CF, BIOS F8 11/05/2021 Aug 10 07:01:29 dg1test kernel: Call Trace: Aug 10 07:01:29 dg1test kernel: <TASK> Aug 10 07:01:29 dg1test kernel: dump_stack_lvl+0x5b/0x90 Aug 10 07:01:29 dg1test kernel: check_noncircular+0xe2/0x110 Aug 10 07:01:29 dg1test kernel: __lock_acquire+0x14e3/0x2240 Aug 10 07:01:29 dg1test kernel: lock_acquire+0xc8/0x2a0 Aug 10 07:01:29 dg1test kernel: ? nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: ? lock_acquire+0xc8/0x2a0 Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: ? nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_client_event+0xf/0x20 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy+0x9b/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: ga100_fifo_nonstall_intr+0x24/0x30 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_intr+0x12c/0x240 [nouveau] Aug 10 07:01:29 dg1test kernel: __handle_irq_event_percpu+0x88/0x240 Aug 10 07:01:29 dg1test kernel: handle_irq_event+0x38/0x80 Aug 10 07:01:29 dg1test kernel: handle_edge_irq+0xa3/0x240 Aug 10 07:01:29 dg1test kernel: __common_interrupt+0x72/0x160 Aug 10 07:01:29 dg1test kernel: common_interrupt+0x60/0xe0 Aug 10 07:01:29 dg1test kernel: asm_common_interrupt+0x26/0x40 Aug 10 07:01:29 dg1test kernel: RIP: 0033:0x7fb66174d700 Aug 10 07:01:29 dg1test kernel: Code: c1 e2 05 29 ca 8d 0c 10 0f be 07 84 c0 75 eb 89 c8 c3 0f 1f 84 00 00 00 00 00 f3 0f 1e fa e9 d7 0f fc ff 0f 1f 80 00 00 00 00 <f3> 0f 1e fa e9 c7 0f fc> Aug 10 07:01:29 dg1test kernel: RSP: 002b:00007ffdd3c48438 EFLAGS: 00000206 Aug 10 07:01:29 dg1test kernel: RAX: 000055bb758763c0 RBX: 000055bb758752c0 RCX: 00000000000028b0 Aug 10 07:01:29 dg1test kernel: RDX: 000055bb758752c0 RSI: 000055bb75887490 RDI: 000055bb75862950 Aug 10 07:01:29 dg1test kernel: RBP: 00007ffdd3c48490 R08: 000055bb75873b10 R09: 0000000000000001 Aug 10 07:01:29 dg1test kernel: R10: 0000000000000004 R11: 000055bb7587f000 R12: 000055bb75887490 Aug 10 07:01:29 dg1test kernel: R13: 000055bb757f6280 R14: 000055bb758875c0 R15: 000055bb757f6280 Aug 10 07:01:29 dg1test kernel: </TASK> Signed-off-by: Dave Airlie <[email protected]> Tested-by: Danilo Krummrich <[email protected]> Reviewed-by: Danilo Krummrich <[email protected]> Signed-off-by: Danilo Krummrich <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sasha Levin <[email protected]>

…le_direct_reclaim() commit 6aaced5 upstream. The task sometimes continues looping in throttle_direct_reclaim() because allow_direct_reclaim(pgdat) keeps returning false. #0 [ffff80002cb6f8d0] __switch_to at ffff8000080095ac #1 [ffff80002cb6f900] __schedule at ffff800008abbd1c #2 [ffff80002cb6f990] schedule at ffff800008abc50c #3 [ffff80002cb6f9b0] throttle_direct_reclaim at ffff800008273550 #4 [ffff80002cb6fa20] try_to_free_pages at ffff800008277b68 #5 [ffff80002cb6fae0] __alloc_pages_nodemask at ffff8000082c4660 #6 [ffff80002cb6fc50] alloc_pages_vma at ffff8000082e4a98 #7 [ffff80002cb6fca0] do_anonymous_page at ffff80000829f5a8 #8 [ffff80002cb6fce0] __handle_mm_fault at ffff8000082a5974 #9 [ffff80002cb6fd90] handle_mm_fault at ffff8000082a5bd4 At this point, the pgdat contains the following two zones: NODE: 4 ZONE: 0 ADDR: ffff00817fffe540 NAME: "DMA32" SIZE: 20480 MIN/LOW/HIGH: 11/28/45 VM_STAT: NR_FREE_PAGES: 359 NR_ZONE_INACTIVE_ANON: 18813 NR_ZONE_ACTIVE_ANON: 0 NR_ZONE_INACTIVE_FILE: 50 NR_ZONE_ACTIVE_FILE: 0 NR_ZONE_UNEVICTABLE: 0 NR_ZONE_WRITE_PENDING: 0 NR_MLOCK: 0 NR_BOUNCE: 0 NR_ZSPAGES: 0 NR_FREE_CMA_PAGES: 0 NODE: 4 ZONE: 1 ADDR: ffff00817fffec00 NAME: "Normal" SIZE: 8454144 PRESENT: 98304 MIN/LOW/HIGH: 68/166/264 VM_STAT: NR_FREE_PAGES: 146 NR_ZONE_INACTIVE_ANON: 94668 NR_ZONE_ACTIVE_ANON: 3 NR_ZONE_INACTIVE_FILE: 735 NR_ZONE_ACTIVE_FILE: 78 NR_ZONE_UNEVICTABLE: 0 NR_ZONE_WRITE_PENDING: 0 NR_MLOCK: 0 NR_BOUNCE: 0 NR_ZSPAGES: 0 NR_FREE_CMA_PAGES: 0 In allow_direct_reclaim(), while processing ZONE_DMA32, the sum of inactive/active file-backed pages calculated in zone_reclaimable_pages() based on the result of zone_page_state_snapshot() is zero. Additionally, since this system lacks swap, the calculation of inactive/ active anonymous pages is skipped. crash> p nr_swap_pages nr_swap_pages = $1937 = { counter = 0 } As a result, ZONE_DMA32 is deemed unreclaimable and skipped, moving on to the processing of the next zone, ZONE_NORMAL, despite ZONE_DMA32 having free pages significantly exceeding the high watermark. The problem is that the pgdat->kswapd_failures hasn't been incremented. crash> px ((struct pglist_data *) 0xffff00817fffe540)->kswapd_failures $1935 = 0x0 This is because the node deemed balanced. The node balancing logic in balance_pgdat() evaluates all zones collectively. If one or more zones (e.g., ZONE_DMA32) have enough free pages to meet their watermarks, the entire node is deemed balanced. This causes balance_pgdat() to exit early before incrementing the kswapd_failures, as it considers the overall memory state acceptable, even though some zones (like ZONE_NORMAL) remain under significant pressure. The patch ensures that zone_reclaimable_pages() includes free pages (NR_FREE_PAGES) in its calculation when no other reclaimable pages are available (e.g., file-backed or anonymous pages). This change prevents zones like ZONE_DMA32, which have sufficient free pages, from being mistakenly deemed unreclaimable. By doing so, the patch ensures proper node balancing, avoids masking pressure on other zones like ZONE_NORMAL, and prevents infinite loops in throttle_direct_reclaim() caused by allow_direct_reclaim(pgdat) repeatedly returning false. The kernel hangs due to a task stuck in throttle_direct_reclaim(), caused by a node being incorrectly deemed balanced despite pressure in certain zones, such as ZONE_NORMAL. This issue arises from zone_reclaimable_pages() returning 0 for zones without reclaimable file- backed or anonymous pages, causing zones like ZONE_DMA32 with sufficient free pages to be skipped. The lack of swap or reclaimable pages results in ZONE_DMA32 being ignored during reclaim, masking pressure in other zones. Consequently, pgdat->kswapd_failures remains 0 in balance_pgdat(), preventing fallback mechanisms in allow_direct_reclaim() from being triggered, leading to an infinite loop in throttle_direct_reclaim(). This patch modifies zone_reclaimable_pages() to account for free pages (NR_FREE_PAGES) when no other reclaimable pages exist. This ensures zones with sufficient free pages are not skipped, enabling proper balancing and reclaim behavior. [[email protected]: coding-style cleanups] Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: 5a1c84b ("mm: remove reclaim and compaction retry approximations") Signed-off-by: Seiji Nishikawa <[email protected]> Cc: Mel Gorman <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> (cherry picked from commit 1ff2302)

[ Upstream commit 4d94f05 ] This reworks hci_cb_list to not use mutex hci_cb_list_lock to avoid bugs like the bellow: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:585 in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 5070, name: kworker/u9:2 preempt_count: 0, expected: 0 RCU nest depth: 1, expected: 0 4 locks held by kworker/u9:2/5070: #0: ffff888015be3948 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3229 [inline] #0: ffff888015be3948 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_scheduled_works+0x8e0/0x1770 kernel/workqueue.c:3335 #1: ffffc90003b6fd00 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3230 [inline] #1: ffffc90003b6fd00 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0}, at: process_scheduled_works+0x91b/0x1770 kernel/workqueue.c:3335 #2: ffff8880665d0078 (&hdev->lock){+.+.}-{3:3}, at: hci_le_create_big_complete_evt+0xcf/0xae0 net/bluetooth/hci_event.c:6914 #3: ffffffff8e132020 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:298 [inline] #3: ffffffff8e132020 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:750 [inline] #3: ffffffff8e132020 (rcu_read_lock){....}-{1:2}, at: hci_le_create_big_complete_evt+0xdb/0xae0 net/bluetooth/hci_event.c:6915 CPU: 0 PID: 5070 Comm: kworker/u9:2 Not tainted 6.8.0-syzkaller-08073-g480e035fc4c7 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Workqueue: hci0 hci_rx_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 __might_resched+0x5d4/0x780 kernel/sched/core.c:10187 __mutex_lock_common kernel/locking/mutex.c:585 [inline] __mutex_lock+0xc1/0xd70 kernel/locking/mutex.c:752 hci_connect_cfm include/net/bluetooth/hci_core.h:2004 [inline] hci_le_create_big_complete_evt+0x3d9/0xae0 net/bluetooth/hci_event.c:6939 hci_event_func net/bluetooth/hci_event.c:7514 [inline] hci_event_packet+0xa53/0x1540 net/bluetooth/hci_event.c:7569 hci_rx_work+0x3e8/0xca0 net/bluetooth/hci_core.c:4171 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0xa00/0x1770 kernel/workqueue.c:3335 worker_thread+0x86d/0xd70 kernel/workqueue.c:3416 kthread+0x2f0/0x390 kernel/kthread.c:388 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:243 </TASK> Reported-by: [email protected] Tested-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=2fb0835e0c9cefc34614 Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Sasha Levin <[email protected]> (cherry picked from commit bef3334)

…nt message commit cddc76b upstream. Address a bug in the kernel that triggers a "sleeping function called from invalid context" warning when /sys/kernel/debug/kmemleak is printed under specific conditions: - CONFIG_PREEMPT_RT=y - Set SELinux as the LSM for the system - Set kptr_restrict to 1 - kmemleak buffer contains at least one item BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 136, name: cat preempt_count: 1, expected: 0 RCU nest depth: 2, expected: 2 6 locks held by cat/136: #0: ffff32e64bcbf950 (&p->lock){+.+.}-{3:3}, at: seq_read_iter+0xb8/0xe30 #1: ffffafe6aaa9dea0 (scan_mutex){+.+.}-{3:3}, at: kmemleak_seq_start+0x34/0x128 #3: ffff32e6546b1cd0 (&object->lock){....}-{2:2}, at: kmemleak_seq_show+0x3c/0x1e0 #4: ffffafe6aa8d8560 (rcu_read_lock){....}-{1:2}, at: has_ns_capability_noaudit+0x8/0x1b0 #5: ffffafe6aabbc0f8 (notif_lock){+.+.}-{2:2}, at: avc_compute_av+0xc4/0x3d0 irq event stamp: 136660 hardirqs last enabled at (136659): [<ffffafe6a80fd7a0>] _raw_spin_unlock_irqrestore+0xa8/0xd8 hardirqs last disabled at (136660): [<ffffafe6a80fd85c>] _raw_spin_lock_irqsave+0x8c/0xb0 softirqs last enabled at (0): [<ffffafe6a5d50b28>] copy_process+0x11d8/0x3df8 softirqs last disabled at (0): [<0000000000000000>] 0x0 Preemption disabled at: [<ffffafe6a6598a4c>] kmemleak_seq_show+0x3c/0x1e0 CPU: 1 UID: 0 PID: 136 Comm: cat Tainted: G E 6.11.0-rt7+ #34 Tainted: [E]=UNSIGNED_MODULE Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0xa0/0x128 show_stack+0x1c/0x30 dump_stack_lvl+0xe8/0x198 dump_stack+0x18/0x20 rt_spin_lock+0x8c/0x1a8 avc_perm_nonode+0xa0/0x150 cred_has_capability.isra.0+0x118/0x218 selinux_capable+0x50/0x80 security_capable+0x7c/0xd0 has_ns_capability_noaudit+0x94/0x1b0 has_capability_noaudit+0x20/0x30 restricted_pointer+0x21c/0x4b0 pointer+0x298/0x760 vsnprintf+0x330/0xf70 seq_printf+0x178/0x218 print_unreferenced+0x1a4/0x2d0 kmemleak_seq_show+0xd0/0x1e0 seq_read_iter+0x354/0xe30 seq_read+0x250/0x378 full_proxy_read+0xd8/0x148 vfs_read+0x190/0x918 ksys_read+0xf0/0x1e0 __arm64_sys_read+0x70/0xa8 invoke_syscall.constprop.0+0xd4/0x1d8 el0_svc+0x50/0x158 el0t_64_sync+0x17c/0x180 %pS and %pK, in the same back trace line, are redundant, and %pS can void %pK service in certain contexts. %pS alone already provides the necessary information, and if it cannot resolve the symbol, it falls back to printing the raw address voiding the original intent behind the %pK. Additionally, %pK requires a privilege check CAP_SYSLOG enforced through the LSM, which can trigger a "sleeping function called from invalid context" warning under RT_PREEMPT kernels when the check occurs in an atomic context. This issue may also affect other LSMs. This change avoids the unnecessary privilege check and resolves the sleeping function warning without any loss of information. Link: https://lkml.kernel.org/r/[email protected] Fixes: 3a6f33d ("mm/kmemleak: use %pK to display kernel pointers in backtrace") Signed-off-by: Alessandro Carminati <[email protected]> Acked-by: Sebastian Andrzej Siewior <[email protected]> Acked-by: Catalin Marinas <[email protected]> Cc: Clément Léger <[email protected]> Cc: Alessandro Carminati <[email protected]> Cc: Eric Chanudet <[email protected]> Cc: Gabriele Paoloni <[email protected]> Cc: Juri Lelli <[email protected]> Cc: Steven Rostedt <[email protected]> Cc: Thomas Weißschuh <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> (cherry picked from commit 86d946f)

…le_direct_reclaim() commit 6aaced5 upstream. The task sometimes continues looping in throttle_direct_reclaim() because allow_direct_reclaim(pgdat) keeps returning false. #0 [ffff80002cb6f8d0] __switch_to at ffff8000080095ac #1 [ffff80002cb6f900] __schedule at ffff800008abbd1c #2 [ffff80002cb6f990] schedule at ffff800008abc50c #3 [ffff80002cb6f9b0] throttle_direct_reclaim at ffff800008273550 #4 [ffff80002cb6fa20] try_to_free_pages at ffff800008277b68 #5 [ffff80002cb6fae0] __alloc_pages_nodemask at ffff8000082c4660 #6 [ffff80002cb6fc50] alloc_pages_vma at ffff8000082e4a98 #7 [ffff80002cb6fca0] do_anonymous_page at ffff80000829f5a8 #8 [ffff80002cb6fce0] __handle_mm_fault at ffff8000082a5974 #9 [ffff80002cb6fd90] handle_mm_fault at ffff8000082a5bd4 At this point, the pgdat contains the following two zones: NODE: 4 ZONE: 0 ADDR: ffff00817fffe540 NAME: "DMA32" SIZE: 20480 MIN/LOW/HIGH: 11/28/45 VM_STAT: NR_FREE_PAGES: 359 NR_ZONE_INACTIVE_ANON: 18813 NR_ZONE_ACTIVE_ANON: 0 NR_ZONE_INACTIVE_FILE: 50 NR_ZONE_ACTIVE_FILE: 0 NR_ZONE_UNEVICTABLE: 0 NR_ZONE_WRITE_PENDING: 0 NR_MLOCK: 0 NR_BOUNCE: 0 NR_ZSPAGES: 0 NR_FREE_CMA_PAGES: 0 NODE: 4 ZONE: 1 ADDR: ffff00817fffec00 NAME: "Normal" SIZE: 8454144 PRESENT: 98304 MIN/LOW/HIGH: 68/166/264 VM_STAT: NR_FREE_PAGES: 146 NR_ZONE_INACTIVE_ANON: 94668 NR_ZONE_ACTIVE_ANON: 3 NR_ZONE_INACTIVE_FILE: 735 NR_ZONE_ACTIVE_FILE: 78 NR_ZONE_UNEVICTABLE: 0 NR_ZONE_WRITE_PENDING: 0 NR_MLOCK: 0 NR_BOUNCE: 0 NR_ZSPAGES: 0 NR_FREE_CMA_PAGES: 0 In allow_direct_reclaim(), while processing ZONE_DMA32, the sum of inactive/active file-backed pages calculated in zone_reclaimable_pages() based on the result of zone_page_state_snapshot() is zero. Additionally, since this system lacks swap, the calculation of inactive/ active anonymous pages is skipped. crash> p nr_swap_pages nr_swap_pages = $1937 = { counter = 0 } As a result, ZONE_DMA32 is deemed unreclaimable and skipped, moving on to the processing of the next zone, ZONE_NORMAL, despite ZONE_DMA32 having free pages significantly exceeding the high watermark. The problem is that the pgdat->kswapd_failures hasn't been incremented. crash> px ((struct pglist_data *) 0xffff00817fffe540)->kswapd_failures $1935 = 0x0 This is because the node deemed balanced. The node balancing logic in balance_pgdat() evaluates all zones collectively. If one or more zones (e.g., ZONE_DMA32) have enough free pages to meet their watermarks, the entire node is deemed balanced. This causes balance_pgdat() to exit early before incrementing the kswapd_failures, as it considers the overall memory state acceptable, even though some zones (like ZONE_NORMAL) remain under significant pressure. The patch ensures that zone_reclaimable_pages() includes free pages (NR_FREE_PAGES) in its calculation when no other reclaimable pages are available (e.g., file-backed or anonymous pages). This change prevents zones like ZONE_DMA32, which have sufficient free pages, from being mistakenly deemed unreclaimable. By doing so, the patch ensures proper node balancing, avoids masking pressure on other zones like ZONE_NORMAL, and prevents infinite loops in throttle_direct_reclaim() caused by allow_direct_reclaim(pgdat) repeatedly returning false. The kernel hangs due to a task stuck in throttle_direct_reclaim(), caused by a node being incorrectly deemed balanced despite pressure in certain zones, such as ZONE_NORMAL. This issue arises from zone_reclaimable_pages() returning 0 for zones without reclaimable file- backed or anonymous pages, causing zones like ZONE_DMA32 with sufficient free pages to be skipped. The lack of swap or reclaimable pages results in ZONE_DMA32 being ignored during reclaim, masking pressure in other zones. Consequently, pgdat->kswapd_failures remains 0 in balance_pgdat(), preventing fallback mechanisms in allow_direct_reclaim() from being triggered, leading to an infinite loop in throttle_direct_reclaim(). This patch modifies zone_reclaimable_pages() to account for free pages (NR_FREE_PAGES) when no other reclaimable pages exist. This ensures zones with sufficient free pages are not skipped, enabling proper balancing and reclaim behavior. [[email protected]: coding-style cleanups] Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: 5a1c84b ("mm: remove reclaim and compaction retry approximations") Signed-off-by: Seiji Nishikawa <[email protected]> Cc: Mel Gorman <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> (cherry picked from commit 1ff2302)

commit 9860370 upstream. irq_chip functions may be called in raw spinlock context. Therefore, we must also use a raw spinlock for our own internal locking. This fixes the following lockdep splat: [ 5.349336] ============================= [ 5.353349] [ BUG: Invalid wait context ] [ 5.357361] 6.13.0-rc5+ #69 Tainted: G W [ 5.363031] ----------------------------- [ 5.367045] kworker/u17:1/44 is trying to lock: [ 5.371587] ffffff88018b02c0 (&chip->gpio_lock){....}-{3:3}, at: xgpio_irq_unmask (drivers/gpio/gpio-xilinx.c:433 (discriminator 8)) [ 5.380079] other info that might help us debug this: [ 5.385138] context-{5:5} [ 5.387762] 5 locks held by kworker/u17:1/44: [ 5.392123] #0: ffffff8800014958 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work (kernel/workqueue.c:3204) [ 5.402260] #1: ffffffc082fcbdd8 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work (kernel/workqueue.c:3205) [ 5.411528] #2: ffffff880172c900 (&dev->mutex){....}-{4:4}, at: __device_attach (drivers/base/dd.c:1006) [ 5.419929] #3: ffffff88039c8268 (request_class#2){+.+.}-{4:4}, at: __setup_irq (kernel/irq/internals.h:156 kernel/irq/manage.c:1596) [ 5.428331] #4: ffffff88039c80c8 (lock_class#2){....}-{2:2}, at: __setup_irq (kernel/irq/manage.c:1614) [ 5.436472] stack backtrace: [ 5.439359] CPU: 2 UID: 0 PID: 44 Comm: kworker/u17:1 Tainted: G W 6.13.0-rc5+ #69 [ 5.448690] Tainted: [W]=WARN [ 5.451656] Hardware name: xlnx,zynqmp (DT) [ 5.455845] Workqueue: events_unbound deferred_probe_work_func [ 5.461699] Call trace: [ 5.464147] show_stack+0x18/0x24 C [ 5.467821] dump_stack_lvl (lib/dump_stack.c:123) [ 5.471501] dump_stack (lib/dump_stack.c:130) [ 5.474824] __lock_acquire (kernel/locking/lockdep.c:4828 kernel/locking/lockdep.c:4898 kernel/locking/lockdep.c:5176) [ 5.478758] lock_acquire (arch/arm64/include/asm/percpu.h:40 kernel/locking/lockdep.c:467 kernel/locking/lockdep.c:5851 kernel/locking/lockdep.c:5814) [ 5.482429] _raw_spin_lock_irqsave (include/linux/spinlock_api_smp.h:111 kernel/locking/spinlock.c:162) [ 5.486797] xgpio_irq_unmask (drivers/gpio/gpio-xilinx.c:433 (discriminator 8)) [ 5.490737] irq_enable (kernel/irq/internals.h:236 kernel/irq/chip.c:170 kernel/irq/chip.c:439 kernel/irq/chip.c:432 kernel/irq/chip.c:345) [ 5.494060] __irq_startup (kernel/irq/internals.h:241 kernel/irq/chip.c:180 kernel/irq/chip.c:250) [ 5.497645] irq_startup (kernel/irq/chip.c:270) [ 5.501143] __setup_irq (kernel/irq/manage.c:1807) [ 5.504728] request_threaded_irq (kernel/irq/manage.c:2208) Fixes: a32c7ca ("gpio: gpio-xilinx: Add interrupt support") Signed-off-by: Sean Anderson <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> (cherry picked from commit 0b310f417457463c0e8953b4d8c029210be69d77)

commit 9860370 upstream. irq_chip functions may be called in raw spinlock context. Therefore, we must also use a raw spinlock for our own internal locking. This fixes the following lockdep splat: [ 5.349336] ============================= [ 5.353349] [ BUG: Invalid wait context ] [ 5.357361] 6.13.0-rc5+ #69 Tainted: G W [ 5.363031] ----------------------------- [ 5.367045] kworker/u17:1/44 is trying to lock: [ 5.371587] ffffff88018b02c0 (&chip->gpio_lock){....}-{3:3}, at: xgpio_irq_unmask (drivers/gpio/gpio-xilinx.c:433 (discriminator 8)) [ 5.380079] other info that might help us debug this: [ 5.385138] context-{5:5} [ 5.387762] 5 locks held by kworker/u17:1/44: [ 5.392123] #0: ffffff8800014958 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work (kernel/workqueue.c:3204) [ 5.402260] #1: ffffffc082fcbdd8 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work (kernel/workqueue.c:3205) [ 5.411528] #2: ffffff880172c900 (&dev->mutex){....}-{4:4}, at: __device_attach (drivers/base/dd.c:1006) [ 5.419929] #3: ffffff88039c8268 (request_class#2){+.+.}-{4:4}, at: __setup_irq (kernel/irq/internals.h:156 kernel/irq/manage.c:1596) [ 5.428331] #4: ffffff88039c80c8 (lock_class#2){....}-{2:2}, at: __setup_irq (kernel/irq/manage.c:1614) [ 5.436472] stack backtrace: [ 5.439359] CPU: 2 UID: 0 PID: 44 Comm: kworker/u17:1 Tainted: G W 6.13.0-rc5+ #69 [ 5.448690] Tainted: [W]=WARN [ 5.451656] Hardware name: xlnx,zynqmp (DT) [ 5.455845] Workqueue: events_unbound deferred_probe_work_func [ 5.461699] Call trace: [ 5.464147] show_stack+0x18/0x24 C [ 5.467821] dump_stack_lvl (lib/dump_stack.c:123) [ 5.471501] dump_stack (lib/dump_stack.c:130) [ 5.474824] __lock_acquire (kernel/locking/lockdep.c:4828 kernel/locking/lockdep.c:4898 kernel/locking/lockdep.c:5176) [ 5.478758] lock_acquire (arch/arm64/include/asm/percpu.h:40 kernel/locking/lockdep.c:467 kernel/locking/lockdep.c:5851 kernel/locking/lockdep.c:5814) [ 5.482429] _raw_spin_lock_irqsave (include/linux/spinlock_api_smp.h:111 kernel/locking/spinlock.c:162) [ 5.486797] xgpio_irq_unmask (drivers/gpio/gpio-xilinx.c:433 (discriminator 8)) [ 5.490737] irq_enable (kernel/irq/internals.h:236 kernel/irq/chip.c:170 kernel/irq/chip.c:439 kernel/irq/chip.c:432 kernel/irq/chip.c:345) [ 5.494060] __irq_startup (kernel/irq/internals.h:241 kernel/irq/chip.c:180 kernel/irq/chip.c:250) [ 5.497645] irq_startup (kernel/irq/chip.c:270) [ 5.501143] __setup_irq (kernel/irq/manage.c:1807) [ 5.504728] request_threaded_irq (kernel/irq/manage.c:2208) Fixes: a32c7ca ("gpio: gpio-xilinx: Add interrupt support") Signed-off-by: Sean Anderson <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> (cherry picked from commit b011165)

[ Upstream commit 600258d ] Packets handled by hardware have added secpath as a way to inform XFRM core code that this path was already handled. That secpath is not needed at all after policy is checked and it is removed later in the stack. However, in the case of IP forwarding is enabled (/proc/sys/net/ipv4/ip_forward), that secpath is not removed and packets which already were handled are reentered to the driver TX path with xfrm_offload set. The following kernel panic is observed in mlx5 in such case: mlx5_core 0000:04:00.0 enp4s0f0np0: Link up mlx5_core 0000:04:00.1 enp4s0f1np1: Link up Initializing XFRM netlink socket IPsec XFRM device driver BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0010) - not-present page PGD 0 P4D 0 Oops: Oops: 0010 [#1] PREEMPT SMP CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.13.0-rc1-alex #3 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffffb87380003800 EFLAGS: 00010206 RAX: ffff8df004e02600 RBX: ffffb873800038d8 RCX: 00000000ffff98cf RDX: ffff8df00733e108 RSI: ffff8df00521fb80 RDI: ffff8df001661f00 RBP: ffffb87380003850 R08: ffff8df013980000 R09: 0000000000000010 R10: 0000000000000002 R11: 0000000000000002 R12: ffff8df001661f00 R13: ffff8df00521fb80 R14: ffff8df00733e108 R15: ffff8df011faf04e FS: 0000000000000000(0000) GS:ffff8df46b800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000106384000 CR4: 0000000000350ef0 Call Trace: <IRQ> ? show_regs+0x63/0x70 ? __die_body+0x20/0x60 ? __die+0x2b/0x40 ? page_fault_oops+0x15c/0x550 ? do_user_addr_fault+0x3ed/0x870 ? exc_page_fault+0x7f/0x190 ? asm_exc_page_fault+0x27/0x30 mlx5e_ipsec_handle_tx_skb+0xe7/0x2f0 [mlx5_core] mlx5e_xmit+0x58e/0x1980 [mlx5_core] ? __fib_lookup+0x6a/0xb0 dev_hard_start_xmit+0x82/0x1d0 sch_direct_xmit+0xfe/0x390 __dev_queue_xmit+0x6d8/0xee0 ? __fib_lookup+0x6a/0xb0 ? internal_add_timer+0x48/0x70 ? mod_timer+0xe2/0x2b0 neigh_resolve_output+0x115/0x1b0 __neigh_update+0x26a/0xc50 neigh_update+0x14/0x20 arp_process+0x2cb/0x8e0 ? __napi_build_skb+0x5e/0x70 arp_rcv+0x11e/0x1c0 ? dev_gro_receive+0x574/0x820 __netif_receive_skb_list_core+0x1cf/0x1f0 netif_receive_skb_list_internal+0x183/0x2a0 napi_complete_done+0x76/0x1c0 mlx5e_napi_poll+0x234/0x7a0 [mlx5_core] __napi_poll+0x2d/0x1f0 net_rx_action+0x1a6/0x370 ? atomic_notifier_call_chain+0x3b/0x50 ? irq_int_handler+0x15/0x20 [mlx5_core] handle_softirqs+0xb9/0x2f0 ? handle_irq_event+0x44/0x60 irq_exit_rcu+0xdb/0x100 common_interrupt+0x98/0xc0 </IRQ> <TASK> asm_common_interrupt+0x27/0x40 RIP: 0010:pv_native_safe_halt+0xb/0x10 Code: 09 c3 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 22 0f 1f 84 00 00 00 00 00 90 eb 07 0f 00 2d 7f e9 36 00 fb 40 00 83 ff 07 77 21 89 ff ff 24 fd 88 3d a1 bd 0f 21 f8 RSP: 0018:ffffffffbe603de8 EFLAGS: 00000202 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000f92f46680 RDX: 0000000000000037 RSI: 00000000ffffffff RDI: 00000000000518d4 RBP: ffffffffbe603df0 R08: 000000cd42e4dffb R09: ffffffffbe603d70 R10: 0000004d80d62680 R11: 0000000000000001 R12: ffffffffbe60bf40 R13: 0000000000000000 R14: 0000000000000000 R15: ffffffffbe60aff8 ? default_idle+0x9/0x20 arch_cpu_idle+0x9/0x10 default_idle_call+0x29/0xf0 do_idle+0x1f2/0x240 cpu_startup_entry+0x2c/0x30 rest_init+0xe7/0x100 start_kernel+0x76b/0xb90 x86_64_start_reservations+0x18/0x30 x86_64_start_kernel+0xc0/0x110 ? setup_ghcb+0xe/0x130 common_startup_64+0x13e/0x141 </TASK> Modules linked in: esp4_offload esp4 xfrm_interface xfrm6_tunnel tunnel4 tunnel6 xfrm_user xfrm_algo binfmt_misc intel_rapl_msr intel_rapl_common kvm_amd ccp kvm input_leds serio_raw qemu_fw_cfg sch_fq_codel dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua efi_pstore ip_tables x_tables autofs4 raid10 raid456 async_raid6_recov async_memcpy async_pq raid6_pq async_xor xor async_tx libcrc32c raid1 raid0 mlx5_core crct10dif_pclmul crc32_pclmul polyval_clmulni polyval_generic ghash_clmulni_intel sha256_ssse3 sha1_ssse3 ahci mlxfw i2c_i801 libahci i2c_mux i2c_smbus psample virtio_rng pci_hyperv_intf aesni_intel crypto_simd cryptd CR2: 0000000000000000 ---[ end trace 0000000000000000 ]--- RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffffb87380003800 EFLAGS: 00010206 RAX: ffff8df004e02600 RBX: ffffb873800038d8 RCX: 00000000ffff98cf RDX: ffff8df00733e108 RSI: ffff8df00521fb80 RDI: ffff8df001661f00 RBP: ffffb87380003850 R08: ffff8df013980000 R09: 0000000000000010 R10: 0000000000000002 R11: 0000000000000002 R12: ffff8df001661f00 R13: ffff8df00521fb80 R14: ffff8df00733e108 R15: ffff8df011faf04e FS: 0000000000000000(0000) GS:ffff8df46b800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000106384000 CR4: 0000000000350ef0 Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: 0x3b800000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Fixes: 5958372 ("xfrm: add RX datapath protection for IPsec packet offload mode") Signed-off-by: Alexandre Cassen <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Steffen Klassert <[email protected]> Signed-off-by: Sasha Levin <[email protected]> (cherry picked from commit d83bb41803b8101264b8c08659f1b36ea1a53f50)

[ Upstream commit c7b87ce ] libtraceevent parses and returns an array of argument fields, sometimes larger than RAW_SYSCALL_ARGS_NUM (6) because it includes "__syscall_nr", idx will traverse to index 6 (7th element) whereas sc->fmt->arg holds 6 elements max, creating an out-of-bounds access. This runtime error is found by UBsan. The error message: $ sudo UBSAN_OPTIONS=print_stacktrace=1 ./perf trace -a --max-events=1 builtin-trace.c:1966:35: runtime error: index 6 out of bounds for type 'syscall_arg_fmt [6]' #0 0x5c04956be5fe in syscall__alloc_arg_fmts /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:1966 #1 0x5c04956c0510 in trace__read_syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2110 #2 0x5c04956c372b in trace__syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2436 #3 0x5c04956d2f39 in trace__init_syscalls_bpf_prog_array_maps /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:3897 #4 0x5c04956d6d25 in trace__run /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:4335 deepin-community#5 0x5c04956e112e in cmd_trace /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:5502 deepin-community#6 0x5c04956eda7d in run_builtin /home/howard/hw/linux-perf/tools/perf/perf.c:351 deepin-community#7 0x5c04956ee0a8 in handle_internal_command /home/howard/hw/linux-perf/tools/perf/perf.c:404 deepin-community#8 0x5c04956ee37f in run_argv /home/howard/hw/linux-perf/tools/perf/perf.c:448 deepin-community#9 0x5c04956ee8e9 in main /home/howard/hw/linux-perf/tools/perf/perf.c:556 deepin-community#10 0x79eb3622a3b7 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 deepin-community#11 0x79eb3622a47a in __libc_start_main_impl ../csu/libc-start.c:360 deepin-community#12 0x5c04955422d4 in _start (/home/howard/hw/linux-perf/tools/perf/perf+0x4e02d4) (BuildId: 5b6cab2d59e96a4341741765ad6914a4d784dbc6) 0.000 ( 0.014 ms): Chrome_ChildIO/117244 write(fd: 238, buf: !, count: 1) = 1 Fixes: 5e58fcf ("perf trace: Allow allocating sc->arg_fmt even without the syscall tracepoint") Signed-off-by: Howard Chu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]> Signed-off-by: Sasha Levin <[email protected]> (cherry picked from commit 6cbe98bfc7c8c84f2fcd659eb863c687f3991cd6)

[ Upstream commit 600258d ] Packets handled by hardware have added secpath as a way to inform XFRM core code that this path was already handled. That secpath is not needed at all after policy is checked and it is removed later in the stack. However, in the case of IP forwarding is enabled (/proc/sys/net/ipv4/ip_forward), that secpath is not removed and packets which already were handled are reentered to the driver TX path with xfrm_offload set. The following kernel panic is observed in mlx5 in such case: mlx5_core 0000:04:00.0 enp4s0f0np0: Link up mlx5_core 0000:04:00.1 enp4s0f1np1: Link up Initializing XFRM netlink socket IPsec XFRM device driver BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0010) - not-present page PGD 0 P4D 0 Oops: Oops: 0010 [#1] PREEMPT SMP CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.13.0-rc1-alex #3 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffffb87380003800 EFLAGS: 00010206 RAX: ffff8df004e02600 RBX: ffffb873800038d8 RCX: 00000000ffff98cf RDX: ffff8df00733e108 RSI: ffff8df00521fb80 RDI: ffff8df001661f00 RBP: ffffb87380003850 R08: ffff8df013980000 R09: 0000000000000010 R10: 0000000000000002 R11: 0000000000000002 R12: ffff8df001661f00 R13: ffff8df00521fb80 R14: ffff8df00733e108 R15: ffff8df011faf04e FS: 0000000000000000(0000) GS:ffff8df46b800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000106384000 CR4: 0000000000350ef0 Call Trace: <IRQ> ? show_regs+0x63/0x70 ? __die_body+0x20/0x60 ? __die+0x2b/0x40 ? page_fault_oops+0x15c/0x550 ? do_user_addr_fault+0x3ed/0x870 ? exc_page_fault+0x7f/0x190 ? asm_exc_page_fault+0x27/0x30 mlx5e_ipsec_handle_tx_skb+0xe7/0x2f0 [mlx5_core] mlx5e_xmit+0x58e/0x1980 [mlx5_core] ? __fib_lookup+0x6a/0xb0 dev_hard_start_xmit+0x82/0x1d0 sch_direct_xmit+0xfe/0x390 __dev_queue_xmit+0x6d8/0xee0 ? __fib_lookup+0x6a/0xb0 ? internal_add_timer+0x48/0x70 ? mod_timer+0xe2/0x2b0 neigh_resolve_output+0x115/0x1b0 __neigh_update+0x26a/0xc50 neigh_update+0x14/0x20 arp_process+0x2cb/0x8e0 ? __napi_build_skb+0x5e/0x70 arp_rcv+0x11e/0x1c0 ? dev_gro_receive+0x574/0x820 __netif_receive_skb_list_core+0x1cf/0x1f0 netif_receive_skb_list_internal+0x183/0x2a0 napi_complete_done+0x76/0x1c0 mlx5e_napi_poll+0x234/0x7a0 [mlx5_core] __napi_poll+0x2d/0x1f0 net_rx_action+0x1a6/0x370 ? atomic_notifier_call_chain+0x3b/0x50 ? irq_int_handler+0x15/0x20 [mlx5_core] handle_softirqs+0xb9/0x2f0 ? handle_irq_event+0x44/0x60 irq_exit_rcu+0xdb/0x100 common_interrupt+0x98/0xc0 </IRQ> <TASK> asm_common_interrupt+0x27/0x40 RIP: 0010:pv_native_safe_halt+0xb/0x10 Code: 09 c3 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 22 0f 1f 84 00 00 00 00 00 90 eb 07 0f 00 2d 7f e9 36 00 fb 40 00 83 ff 07 77 21 89 ff ff 24 fd 88 3d a1 bd 0f 21 f8 RSP: 0018:ffffffffbe603de8 EFLAGS: 00000202 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000f92f46680 RDX: 0000000000000037 RSI: 00000000ffffffff RDI: 00000000000518d4 RBP: ffffffffbe603df0 R08: 000000cd42e4dffb R09: ffffffffbe603d70 R10: 0000004d80d62680 R11: 0000000000000001 R12: ffffffffbe60bf40 R13: 0000000000000000 R14: 0000000000000000 R15: ffffffffbe60aff8 ? default_idle+0x9/0x20 arch_cpu_idle+0x9/0x10 default_idle_call+0x29/0xf0 do_idle+0x1f2/0x240 cpu_startup_entry+0x2c/0x30 rest_init+0xe7/0x100 start_kernel+0x76b/0xb90 x86_64_start_reservations+0x18/0x30 x86_64_start_kernel+0xc0/0x110 ? setup_ghcb+0xe/0x130 common_startup_64+0x13e/0x141 </TASK> Modules linked in: esp4_offload esp4 xfrm_interface xfrm6_tunnel tunnel4 tunnel6 xfrm_user xfrm_algo binfmt_misc intel_rapl_msr intel_rapl_common kvm_amd ccp kvm input_leds serio_raw qemu_fw_cfg sch_fq_codel dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua efi_pstore ip_tables x_tables autofs4 raid10 raid456 async_raid6_recov async_memcpy async_pq raid6_pq async_xor xor async_tx libcrc32c raid1 raid0 mlx5_core crct10dif_pclmul crc32_pclmul polyval_clmulni polyval_generic ghash_clmulni_intel sha256_ssse3 sha1_ssse3 ahci mlxfw i2c_i801 libahci i2c_mux i2c_smbus psample virtio_rng pci_hyperv_intf aesni_intel crypto_simd cryptd CR2: 0000000000000000 ---[ end trace 0000000000000000 ]--- RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffffb87380003800 EFLAGS: 00010206 RAX: ffff8df004e02600 RBX: ffffb873800038d8 RCX: 00000000ffff98cf RDX: ffff8df00733e108 RSI: ffff8df00521fb80 RDI: ffff8df001661f00 RBP: ffffb87380003850 R08: ffff8df013980000 R09: 0000000000000010 R10: 0000000000000002 R11: 0000000000000002 R12: ffff8df001661f00 R13: ffff8df00521fb80 R14: ffff8df00733e108 R15: ffff8df011faf04e FS: 0000000000000000(0000) GS:ffff8df46b800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000106384000 CR4: 0000000000350ef0 Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: 0x3b800000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Fixes: 5958372 ("xfrm: add RX datapath protection for IPsec packet offload mode") Signed-off-by: Alexandre Cassen <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Steffen Klassert <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit c7b87ce ] libtraceevent parses and returns an array of argument fields, sometimes larger than RAW_SYSCALL_ARGS_NUM (6) because it includes "__syscall_nr", idx will traverse to index 6 (7th element) whereas sc->fmt->arg holds 6 elements max, creating an out-of-bounds access. This runtime error is found by UBsan. The error message: $ sudo UBSAN_OPTIONS=print_stacktrace=1 ./perf trace -a --max-events=1 builtin-trace.c:1966:35: runtime error: index 6 out of bounds for type 'syscall_arg_fmt [6]' #0 0x5c04956be5fe in syscall__alloc_arg_fmts /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:1966 #1 0x5c04956c0510 in trace__read_syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2110 #2 0x5c04956c372b in trace__syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2436 #3 0x5c04956d2f39 in trace__init_syscalls_bpf_prog_array_maps /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:3897 #4 0x5c04956d6d25 in trace__run /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:4335 #5 0x5c04956e112e in cmd_trace /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:5502 #6 0x5c04956eda7d in run_builtin /home/howard/hw/linux-perf/tools/perf/perf.c:351 #7 0x5c04956ee0a8 in handle_internal_command /home/howard/hw/linux-perf/tools/perf/perf.c:404 #8 0x5c04956ee37f in run_argv /home/howard/hw/linux-perf/tools/perf/perf.c:448 #9 0x5c04956ee8e9 in main /home/howard/hw/linux-perf/tools/perf/perf.c:556 #10 0x79eb3622a3b7 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 #11 0x79eb3622a47a in __libc_start_main_impl ../csu/libc-start.c:360 #12 0x5c04955422d4 in _start (/home/howard/hw/linux-perf/tools/perf/perf+0x4e02d4) (BuildId: 5b6cab2d59e96a4341741765ad6914a4d784dbc6) 0.000 ( 0.014 ms): Chrome_ChildIO/117244 write(fd: 238, buf: !, count: 1) = 1 Fixes: 5e58fcf ("perf trace: Allow allocating sc->arg_fmt even without the syscall tracepoint") Signed-off-by: Howard Chu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit f02c41f upstream. Use raw_spinlock in order to fix spurious messages about invalid context when spinlock debugging is enabled. The lock is only used to serialize register access. [ 4.239592] ============================= [ 4.239595] [ BUG: Invalid wait context ] [ 4.239599] 6.13.0-rc7-arm64-renesas-05496-gd088502a519f #35 Not tainted [ 4.239603] ----------------------------- [ 4.239606] kworker/u8:5/76 is trying to lock: [ 4.239609] ffff0000091898a0 (&p->lock){....}-{3:3}, at: gpio_rcar_config_interrupt_input_mode+0x34/0x164 [ 4.239641] other info that might help us debug this: [ 4.239643] context-{5:5} [ 4.239646] 5 locks held by kworker/u8:5/76: [ 4.239651] #0: ffff0000080fb148 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x190/0x62c [ 4.250180] OF: /soc/sound@ec500000/ports/port@0/endpoint: Read of boolean property 'frame-master' with a value. [ 4.254094] #1: ffff80008299bd80 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x1b8/0x62c [ 4.254109] #2: ffff00000920c8f8 [ 4.258345] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'bitclock-master' with a value. [ 4.264803] (&dev->mutex){....}-{4:4}, at: __device_attach_async_helper+0x3c/0xdc [ 4.264820] #3: ffff00000a50ca40 (request_class#2){+.+.}-{4:4}, at: __setup_irq+0xa0/0x690 [ 4.264840] #4: [ 4.268872] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'frame-master' with a value. [ 4.273275] ffff00000a50c8c8 (lock_class){....}-{2:2}, at: __setup_irq+0xc4/0x690 [ 4.296130] renesas_sdhi_internal_dmac ee100000.mmc: mmc1 base at 0x00000000ee100000, max clock rate 200 MHz [ 4.304082] stack backtrace: [ 4.304086] CPU: 1 UID: 0 PID: 76 Comm: kworker/u8:5 Not tainted 6.13.0-rc7-arm64-renesas-05496-gd088502a519f #35 [ 4.304092] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) [ 4.304097] Workqueue: async async_run_entry_fn [ 4.304106] Call trace: [ 4.304110] show_stack+0x14/0x20 (C) [ 4.304122] dump_stack_lvl+0x6c/0x90 [ 4.304131] dump_stack+0x14/0x1c [ 4.304138] __lock_acquire+0xdfc/0x1584 [ 4.426274] lock_acquire+0x1c4/0x33c [ 4.429942] _raw_spin_lock_irqsave+0x5c/0x80 [ 4.434307] gpio_rcar_config_interrupt_input_mode+0x34/0x164 [ 4.440061] gpio_rcar_irq_set_type+0xd4/0xd8 [ 4.444422] __irq_set_trigger+0x5c/0x178 [ 4.448435] __setup_irq+0x2e4/0x690 [ 4.452012] request_threaded_irq+0xc4/0x190 [ 4.456285] devm_request_threaded_irq+0x7c/0xf4 [ 4.459398] ata1: link resume succeeded after 1 retries [ 4.460902] mmc_gpiod_request_cd_irq+0x68/0xe0 [ 4.470660] mmc_start_host+0x50/0xac [ 4.474327] mmc_add_host+0x80/0xe4 [ 4.477817] tmio_mmc_host_probe+0x2b0/0x440 [ 4.482094] renesas_sdhi_probe+0x488/0x6f4 [ 4.486281] renesas_sdhi_internal_dmac_probe+0x60/0x78 [ 4.491509] platform_probe+0x64/0xd8 [ 4.495178] really_probe+0xb8/0x2a8 [ 4.498756] __driver_probe_device+0x74/0x118 [ 4.503116] driver_probe_device+0x3c/0x154 [ 4.507303] __device_attach_driver+0xd4/0x160 [ 4.511750] bus_for_each_drv+0x84/0xe0 [ 4.515588] __device_attach_async_helper+0xb0/0xdc [ 4.520470] async_run_entry_fn+0x30/0xd8 [ 4.524481] process_one_work+0x210/0x62c [ 4.528494] worker_thread+0x1ac/0x340 [ 4.532245] kthread+0x10c/0x110 [ 4.535476] ret_from_fork+0x10/0x20 Signed-off-by: Niklas Söderlund <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Tested-by: Geert Uytterhoeven <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> (cherry picked from commit c103650)

commit f364cde upstream. LTP reported a NULL pointer dereference as followed: CPU: 7 UID: 0 PID: 5995 Comm: cat Kdump: loaded Not tainted 6.12.0-rc6+ #3 Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 pstate: 40400005 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __pi_strcmp+0x24/0x140 lr : zcomp_available_show+0x60/0x100 [zram] sp : ffff800088b93b90 x29: ffff800088b93b90 x28: 0000000000000001 x27: 0000000000400cc0 x26: 0000000000000ffe x25: ffff80007b3e2388 x24: 0000000000000000 x23: ffff80007b3e2390 x22: ffff0004041a9000 x21: ffff80007b3e2900 x20: 0000000000000000 x19: 0000000000000000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: ffff80007b3e2900 x9 : ffff80007b3cb280 x8 : 0101010101010101 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000040 x4 : 0000000000000000 x3 : 00656c722d6f7a6c x2 : 0000000000000000 x1 : ffff80007b3e2900 x0 : 0000000000000000 Call trace: __pi_strcmp+0x24/0x140 comp_algorithm_show+0x40/0x70 [zram] dev_attr_show+0x28/0x80 sysfs_kf_seq_show+0x90/0x140 kernfs_seq_show+0x34/0x48 seq_read_iter+0x1d4/0x4e8 kernfs_fop_read_iter+0x40/0x58 new_sync_read+0x9c/0x168 vfs_read+0x1a8/0x1f8 ksys_read+0x74/0x108 __arm64_sys_read+0x24/0x38 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x38/0x138 el0t_64_sync_handler+0xc0/0xc8 el0t_64_sync+0x188/0x190 The zram->comp_algs[ZRAM_PRIMARY_COMP] can be NULL in zram_add() if comp_algorithm_set() has not been called. User can access the zram device by sysfs after device_add_disk(), so there is a time window to trigger the NULL pointer dereference. Move it ahead device_add_disk() to make sure when user can access the zram device, it is ready. comp_algorithm_set() is protected by zram->init_lock in other places and no such problem. Link: https://lkml.kernel.org/r/[email protected] Fixes: 7ac07a2 ("zram: preparation for multi-zcomp support") Signed-off-by: Liu Shixin <[email protected]> Reviewed-by: Sergey Senozhatsky <[email protected]> Cc: Jens Axboe <[email protected]> Cc: Minchan Kim <[email protected]> Signed-off-by: Andrew Morton <[email protected]> [This fix does not backport zram_comp_params_reset which was introduced after v6.6, in commit f2bac7a ("zram: introduce zcomp_params structure")] Signed-off-by: Jianqi Ren <[email protected]> Signed-off-by: He Zhe <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> (cherry picked from commit c7ee791)

…ate_pagetables' [ Upstream commit fddc450 ] This commit addresses a circular locking dependency in the svm_range_cpu_invalidate_pagetables function. The function previously held a lock while determining whether to perform an unmap or eviction operation, which could lead to deadlocks. Fixes the below: [ 223.418794] ====================================================== [ 223.418820] WARNING: possible circular locking dependency detected [ 223.418845] 6.12.0-amdstaging-drm-next-lol-050225 #14 Tainted: G U OE [ 223.418869] ------------------------------------------------------ [ 223.418889] kfdtest/3939 is trying to acquire lock: [ 223.418906] ffff8957552eae38 (&dqm->lock_hidden){+.+.}-{3:3}, at: evict_process_queues_cpsch+0x43/0x210 [amdgpu] [ 223.419302] but task is already holding lock: [ 223.419303] ffff8957556b83b0 (&prange->lock){+.+.}-{3:3}, at: svm_range_cpu_invalidate_pagetables+0x9d/0x850 [amdgpu] [ 223.419447] Console: switching to colour dummy device 80x25 [ 223.419477] [IGT] amd_basic: executing [ 223.419599] which lock already depends on the new lock. [ 223.419611] the existing dependency chain (in reverse order) is: [ 223.419621] -> #2 (&prange->lock){+.+.}-{3:3}: [ 223.419636] __mutex_lock+0x85/0xe20 [ 223.419647] mutex_lock_nested+0x1b/0x30 [ 223.419656] svm_range_validate_and_map+0x2f1/0x15b0 [amdgpu] [ 223.419954] svm_range_set_attr+0xe8c/0x1710 [amdgpu] [ 223.420236] svm_ioctl+0x46/0x50 [amdgpu] [ 223.420503] kfd_ioctl_svm+0x50/0x90 [amdgpu] [ 223.420763] kfd_ioctl+0x409/0x6d0 [amdgpu] [ 223.421024] __x64_sys_ioctl+0x95/0xd0 [ 223.421036] x64_sys_call+0x1205/0x20d0 [ 223.421047] do_syscall_64+0x87/0x140 [ 223.421056] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 223.421068] -> #1 (reservation_ww_class_mutex){+.+.}-{3:3}: [ 223.421084] __ww_mutex_lock.constprop.0+0xab/0x1560 [ 223.421095] ww_mutex_lock+0x2b/0x90 [ 223.421103] amdgpu_amdkfd_alloc_gtt_mem+0xcc/0x2b0 [amdgpu] [ 223.421361] add_queue_mes+0x3bc/0x440 [amdgpu] [ 223.421623] unhalt_cpsch+0x1ae/0x240 [amdgpu] [ 223.421888] kgd2kfd_start_sched+0x5e/0xd0 [amdgpu] [ 223.422148] amdgpu_amdkfd_start_sched+0x3d/0x50 [amdgpu] [ 223.422414] amdgpu_gfx_enforce_isolation_handler+0x132/0x270 [amdgpu] [ 223.422662] process_one_work+0x21e/0x680 [ 223.422673] worker_thread+0x190/0x330 [ 223.422682] kthread+0xe7/0x120 [ 223.422690] ret_from_fork+0x3c/0x60 [ 223.422699] ret_from_fork_asm+0x1a/0x30 [ 223.422708] -> #0 (&dqm->lock_hidden){+.+.}-{3:3}: [ 223.422723] __lock_acquire+0x16f4/0x2810 [ 223.422734] lock_acquire+0xd1/0x300 [ 223.422742] __mutex_lock+0x85/0xe20 [ 223.422751] mutex_lock_nested+0x1b/0x30 [ 223.422760] evict_process_queues_cpsch+0x43/0x210 [amdgpu] [ 223.423025] kfd_process_evict_queues+0x8a/0x1d0 [amdgpu] [ 223.423285] kgd2kfd_quiesce_mm+0x43/0x90 [amdgpu] [ 223.423540] svm_range_cpu_invalidate_pagetables+0x4a7/0x850 [amdgpu] [ 223.423807] __mmu_notifier_invalidate_range_start+0x1f5/0x250 [ 223.423819] copy_page_range+0x1e94/0x1ea0 [ 223.423829] copy_process+0x172f/0x2ad0 [ 223.423839] kernel_clone+0x9c/0x3f0 [ 223.423847] __do_sys_clone+0x66/0x90 [ 223.423856] __x64_sys_clone+0x25/0x30 [ 223.423864] x64_sys_call+0x1d7c/0x20d0 [ 223.423872] do_syscall_64+0x87/0x140 [ 223.423880] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 223.423891] other info that might help us debug this: [ 223.423903] Chain exists of: &dqm->lock_hidden --> reservation_ww_class_mutex --> &prange->lock [ 223.423926] Possible unsafe locking scenario: [ 223.423935] CPU0 CPU1 [ 223.423942] ---- ---- [ 223.423949] lock(&prange->lock); [ 223.423958] lock(reservation_ww_class_mutex); [ 223.423970] lock(&prange->lock); [ 223.423981] lock(&dqm->lock_hidden); [ 223.423990] *** DEADLOCK *** [ 223.423999] 5 locks held by kfdtest/3939: [ 223.424006] #0: ffffffffb82b4fc0 (dup_mmap_sem){.+.+}-{0:0}, at: copy_process+0x1387/0x2ad0 [ 223.424026] #1: ffff89575eda81b0 (&mm->mmap_lock){++++}-{3:3}, at: copy_process+0x13a8/0x2ad0 [ 223.424046] #2: ffff89575edaf3b0 (&mm->mmap_lock/1){+.+.}-{3:3}, at: copy_process+0x13e4/0x2ad0 [ 223.424066] #3: ffffffffb82e76e0 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}, at: copy_page_range+0x1cea/0x1ea0 [ 223.424088] #4: ffff8957556b83b0 (&prange->lock){+.+.}-{3:3}, at: svm_range_cpu_invalidate_pagetables+0x9d/0x850 [amdgpu] [ 223.424365] stack backtrace: [ 223.424374] CPU: 0 UID: 0 PID: 3939 Comm: kfdtest Tainted: G U OE 6.12.0-amdstaging-drm-next-lol-050225 #14 [ 223.424392] Tainted: [U]=USER, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE [ 223.424401] Hardware name: Gigabyte Technology Co., Ltd. X570 AORUS PRO WIFI/X570 AORUS PRO WIFI, BIOS F36a 02/16/2022 [ 223.424416] Call Trace: [ 223.424423] <TASK> [ 223.424430] dump_stack_lvl+0x9b/0xf0 [ 223.424441] dump_stack+0x10/0x20 [ 223.424449] print_circular_bug+0x275/0x350 [ 223.424460] check_noncircular+0x157/0x170 [ 223.424469] ? __bfs+0xfd/0x2c0 [ 223.424481] __lock_acquire+0x16f4/0x2810 [ 223.424490] ? srso_return_thunk+0x5/0x5f [ 223.424505] lock_acquire+0xd1/0x300 [ 223.424514] ? evict_process_queues_cpsch+0x43/0x210 [amdgpu] [ 223.424783] __mutex_lock+0x85/0xe20 [ 223.424792] ? evict_process_queues_cpsch+0x43/0x210 [amdgpu] [ 223.425058] ? srso_return_thunk+0x5/0x5f [ 223.425067] ? mark_held_locks+0x54/0x90 [ 223.425076] ? evict_process_queues_cpsch+0x43/0x210 [amdgpu] [ 223.425339] ? srso_return_thunk+0x5/0x5f [ 223.425350] mutex_lock_nested+0x1b/0x30 [ 223.425358] ? mutex_lock_nested+0x1b/0x30 [ 223.425367] evict_process_queues_cpsch+0x43/0x210 [amdgpu] [ 223.425631] kfd_process_evict_queues+0x8a/0x1d0 [amdgpu] [ 223.425893] kgd2kfd_quiesce_mm+0x43/0x90 [amdgpu] [ 223.426156] svm_range_cpu_invalidate_pagetables+0x4a7/0x850 [amdgpu] [ 223.426423] ? srso_return_thunk+0x5/0x5f [ 223.426436] __mmu_notifier_invalidate_range_start+0x1f5/0x250 [ 223.426450] copy_page_range+0x1e94/0x1ea0 [ 223.426461] ? srso_return_thunk+0x5/0x5f [ 223.426474] ? srso_return_thunk+0x5/0x5f [ 223.426484] ? lock_acquire+0xd1/0x300 [ 223.426494] ? copy_process+0x1718/0x2ad0 [ 223.426502] ? srso_return_thunk+0x5/0x5f [ 223.426510] ? sched_clock_noinstr+0x9/0x10 [ 223.426519] ? local_clock_noinstr+0xe/0xc0 [ 223.426528] ? copy_process+0x1718/0x2ad0 [ 223.426537] ? srso_return_thunk+0x5/0x5f [ 223.426550] copy_process+0x172f/0x2ad0 [ 223.426569] kernel_clone+0x9c/0x3f0 [ 223.426577] ? __schedule+0x4c9/0x1b00 [ 223.426586] ? srso_return_thunk+0x5/0x5f [ 223.426594] ? sched_clock_noinstr+0x9/0x10 [ 223.426602] ? srso_return_thunk+0x5/0x5f [ 223.426610] ? local_clock_noinstr+0xe/0xc0 [ 223.426619] ? schedule+0x107/0x1a0 [ 223.426629] __do_sys_clone+0x66/0x90 [ 223.426643] __x64_sys_clone+0x25/0x30 [ 223.426652] x64_sys_call+0x1d7c/0x20d0 [ 223.426661] do_syscall_64+0x87/0x140 [ 223.426671] ? srso_return_thunk+0x5/0x5f [ 223.426679] ? common_nsleep+0x44/0x50 [ 223.426690] ? srso_return_thunk+0x5/0x5f [ 223.426698] ? trace_hardirqs_off+0x52/0xd0 [ 223.426709] ? srso_return_thunk+0x5/0x5f [ 223.426717] ? syscall_exit_to_user_mode+0xcc/0x200 [ 223.426727] ? srso_return_thunk+0x5/0x5f [ 223.426736] ? do_syscall_64+0x93/0x140 [ 223.426748] ? srso_return_thunk+0x5/0x5f [ 223.426756] ? up_write+0x1c/0x1e0 [ 223.426765] ? srso_return_thunk+0x5/0x5f [ 223.426775] ? srso_return_thunk+0x5/0x5f [ 223.426783] ? trace_hardirqs_off+0x52/0xd0 [ 223.426792] ? srso_return_thunk+0x5/0x5f [ 223.426800] ? syscall_exit_to_user_mode+0xcc/0x200 [ 223.426810] ? srso_return_thunk+0x5/0x5f [ 223.426818] ? do_syscall_64+0x93/0x140 [ 223.426826] ? syscall_exit_to_user_mode+0xcc/0x200 [ 223.426836] ? srso_return_thunk+0x5/0x5f [ 223.426844] ? do_syscall_64+0x93/0x140 [ 223.426853] ? srso_return_thunk+0x5/0x5f [ 223.426861] ? irqentry_exit+0x6b/0x90 [ 223.426869] ? srso_return_thunk+0x5/0x5f [ 223.426877] ? exc_page_fault+0xa7/0x2c0 [ 223.426888] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 223.426898] RIP: 0033:0x7f46758eab57 [ 223.426906] Code: ba 04 00 f3 0f 1e fa 64 48 8b 04 25 10 00 00 00 45 31 c0 31 d2 31 f6 bf 11 00 20 01 4c 8d 90 d0 02 00 00 b8 38 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 41 41 89 c0 85 c0 75 2c 64 48 8b 04 25 10 00 [ 223.426930] RSP: 002b:00007fff5c3e5188 EFLAGS: 00000246 ORIG_RAX: 0000000000000038 [ 223.426943] RAX: ffffffffffffffda RBX: 00007f4675f8c040 RCX: 00007f46758eab57 [ 223.426954] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000001200011 [ 223.426965] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 223.426975] R10: 00007f4675e81a50 R11: 0000000000000246 R12: 0000000000000001 [ 223.426986] R13: 00007fff5c3e5470 R14: 00007fff5c3e53e0 R15: 00007fff5c3e5410 [ 223.427004] </TASK> v2: To resolve this issue, the allocation of the process context buffer (`proc_ctx_bo`) has been moved from the `add_queue_mes` function to the `pqm_create_queue` function. This change ensures that the buffer is allocated only when the first queue for a process is created and only if the Micro Engine Scheduler (MES) is enabled. (Felix) v3: Fix typo s/Memory Execution Scheduler (MES)/Micro Engine Scheduler in commit message. (Lijo) Fixes: 438b39a ("drm/amdkfd: pause autosuspend when creating pdd") Cc: Jesse Zhang <[email protected]> Cc: Yunxiang Li <[email protected]> Cc: Philip Yang <[email protected]> Cc: Alex Sierra <[email protected]> Cc: Felix Kuehling <[email protected]> Cc: Christian König <[email protected]> Cc: Alex Deucher <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]> (cherry picked from commit 0f88894)

…cal section [ Upstream commit 85b2b9c ] A circular lock dependency splat has been seen involving down_trylock(): ====================================================== WARNING: possible circular locking dependency detected 6.12.0-41.el10.s390x+debug ------------------------------------------------------ dd/32479 is trying to acquire lock: 0015a20accd0d4f8 ((console_sem).lock){-.-.}-{2:2}, at: down_trylock+0x26/0x90 but task is already holding lock: 000000017e461698 (&zone->lock){-.-.}-{2:2}, at: rmqueue_bulk+0xac/0x8f0 the existing dependency chain (in reverse order) is: -> #4 (&zone->lock){-.-.}-{2:2}: -> #3 (hrtimer_bases.lock){-.-.}-{2:2}: -> #2 (&rq->__lock){-.-.}-{2:2}: -> #1 (&p->pi_lock){-.-.}-{2:2}: -> #0 ((console_sem).lock){-.-.}-{2:2}: The console_sem -> pi_lock dependency is due to calling try_to_wake_up() while holding the console_sem raw_spinlock. This dependency can be broken by using wake_q to do the wakeup instead of calling try_to_wake_up() under the console_sem lock. This will also make the semaphore's raw_spinlock become a terminal lock without taking any further locks underneath it. The hrtimer_bases.lock is a raw_spinlock while zone->lock is a spinlock. The hrtimer_bases.lock -> zone->lock dependency happens via the debug_objects_fill_pool() helper function in the debugobjects code. -> #4 (&zone->lock){-.-.}-{2:2}: __lock_acquire+0xe86/0x1cc0 lock_acquire.part.0+0x258/0x630 lock_acquire+0xb8/0xe0 _raw_spin_lock_irqsave+0xb4/0x120 rmqueue_bulk+0xac/0x8f0 __rmqueue_pcplist+0x580/0x830 rmqueue_pcplist+0xfc/0x470 rmqueue.isra.0+0xdec/0x11b0 get_page_from_freelist+0x2ee/0xeb0 __alloc_pages_noprof+0x2c2/0x520 alloc_pages_mpol_noprof+0x1fc/0x4d0 alloc_pages_noprof+0x8c/0xe0 allocate_slab+0x320/0x460 ___slab_alloc+0xa58/0x12b0 __slab_alloc.isra.0+0x42/0x60 kmem_cache_alloc_noprof+0x304/0x350 fill_pool+0xf6/0x450 debug_object_activate+0xfe/0x360 enqueue_hrtimer+0x34/0x190 __run_hrtimer+0x3c8/0x4c0 __hrtimer_run_queues+0x1b2/0x260 hrtimer_interrupt+0x316/0x760 do_IRQ+0x9a/0xe0 do_irq_async+0xf6/0x160 Normally a raw_spinlock to spinlock dependency is not legitimate and will be warned if CONFIG_PROVE_RAW_LOCK_NESTING is enabled, but debug_objects_fill_pool() is an exception as it explicitly allows this dependency for non-PREEMPT_RT kernel without causing PROVE_RAW_LOCK_NESTING lockdep splat. As a result, this dependency is legitimate and not a bug. Anyway, semaphore is the only locking primitive left that is still using try_to_wake_up() to do wakeup inside critical section, all the other locking primitives had been migrated to use wake_q to do wakeup outside of the critical section. It is also possible that there are other circular locking dependencies involving printk/console_sem or other existing/new semaphores lurking somewhere which may show up in the future. Let just do the migration now to wake_q to avoid headache like this. Reported-by: [email protected] Signed-off-by: Waiman Long <[email protected]> Signed-off-by: Boqun Feng <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Cc: Linus Torvalds <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]> (cherry picked from commit e7d8c57)

[ Upstream commit 053f3ff ] v2: - Created a single error handling unlock and exit in veth_pool_store - Greatly expanded commit message with previous explanatory-only text Summary: Use rtnl_mutex to synchronize veth_pool_store with itself, ibmveth_close and ibmveth_open, preventing multiple calls in a row to napi_disable. Background: Two (or more) threads could call veth_pool_store through writing to /sys/devices/vio/30000002/pool*/*. You can do this easily with a little shell script. This causes a hang. I configured LOCKDEP, compiled ibmveth.c with DEBUG, and built a new kernel. I ran this test again and saw: Setting pool0/active to 0 Setting pool1/active to 1 [ 73.911067][ T4365] ibmveth 30000002 eth0: close starting Setting pool1/active to 1 Setting pool1/active to 0 [ 73.911367][ T4366] ibmveth 30000002 eth0: close starting [ 73.916056][ T4365] ibmveth 30000002 eth0: close complete [ 73.916064][ T4365] ibmveth 30000002 eth0: open starting [ 110.808564][ T712] systemd-journald[712]: Sent WATCHDOG=1 notification. [ 230.808495][ T712] systemd-journald[712]: Sent WATCHDOG=1 notification. [ 243.683786][ T123] INFO: task stress.sh:4365 blocked for more than 122 seconds. [ 243.683827][ T123] Not tainted 6.14.0-01103-g2df0c02dab82-dirty #8 [ 243.683833][ T123] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 243.683838][ T123] task:stress.sh state:D stack:28096 pid:4365 tgid:4365 ppid:4364 task_flags:0x400040 flags:0x00042000 [ 243.683852][ T123] Call Trace: [ 243.683857][ T123] [c00000000c38f690] [0000000000000001] 0x1 (unreliable) [ 243.683868][ T123] [c00000000c38f840] [c00000000001f908] __switch_to+0x318/0x4e0 [ 243.683878][ T123] [c00000000c38f8a0] [c000000001549a70] __schedule+0x500/0x12a0 [ 243.683888][ T123] [c00000000c38f9a0] [c00000000154a878] schedule+0x68/0x210 [ 243.683896][ T123] [c00000000c38f9d0] [c00000000154ac80] schedule_preempt_disabled+0x30/0x50 [ 243.683904][ T123] [c00000000c38fa00] [c00000000154dbb0] __mutex_lock+0x730/0x10f0 [ 243.683913][ T123] [c00000000c38fb10] [c000000001154d40] napi_enable+0x30/0x60 [ 243.683921][ T123] [c00000000c38fb40] [c000000000f4ae94] ibmveth_open+0x68/0x5dc [ 243.683928][ T123] [c00000000c38fbe0] [c000000000f4aa20] veth_pool_store+0x220/0x270 [ 243.683936][ T123] [c00000000c38fc70] [c000000000826278] sysfs_kf_write+0x68/0xb0 [ 243.683944][ T123] [c00000000c38fcb0] [c0000000008240b8] kernfs_fop_write_iter+0x198/0x2d0 [ 243.683951][ T123] [c00000000c38fd00] [c00000000071b9ac] vfs_write+0x34c/0x650 [ 243.683958][ T123] [c00000000c38fdc0] [c00000000071bea8] ksys_write+0x88/0x150 [ 243.683966][ T123] [c00000000c38fe10] [c0000000000317f4] system_call_exception+0x124/0x340 [ 243.683973][ T123] [c00000000c38fe50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec ... [ 243.684087][ T123] Showing all locks held in the system: [ 243.684095][ T123] 1 lock held by khungtaskd/123: [ 243.684099][ T123] #0: c00000000278e370 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x50/0x248 [ 243.684114][ T123] 4 locks held by stress.sh/4365: [ 243.684119][ T123] #0: c00000003a4cd3f8 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x88/0x150 [ 243.684132][ T123] #1: c000000041aea888 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x154/0x2d0 [ 243.684143][ T123] #2: c0000000366fb9a8 (kn->active#64){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x160/0x2d0 [ 243.684155][ T123] #3: c000000035ff4cb8 (&dev->lock){+.+.}-{3:3}, at: napi_enable+0x30/0x60 [ 243.684166][ T123] 5 locks held by stress.sh/4366: [ 243.684170][ T123] #0: c00000003a4cd3f8 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x88/0x150 [ 243.684183][ T123] #1: c00000000aee2288 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x154/0x2d0 [ 243.684194][ T123] #2: c0000000366f4ba8 (kn->active#64){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x160/0x2d0 [ 243.684205][ T123] #3: c000000035ff4cb8 (&dev->lock){+.+.}-{3:3}, at: napi_disable+0x30/0x60 [ 243.684216][ T123] #4: c0000003ff9bbf18 (&rq->__lock){-.-.}-{2:2}, at: __schedule+0x138/0x12a0 From the ibmveth debug, two threads are calling veth_pool_store, which calls ibmveth_close and ibmveth_open. Here's the sequence: T4365 T4366 ----------------- ----------------- --------- veth_pool_store veth_pool_store ibmveth_close ibmveth_close napi_disable napi_disable ibmveth_open napi_enable <- HANG ibmveth_close calls napi_disable at the top and ibmveth_open calls napi_enable at the top. https://docs.kernel.org/networking/napi.html]] says The control APIs are not idempotent. Control API calls are safe against concurrent use of datapath APIs but an incorrect sequence of control API calls may result in crashes, deadlocks, or race conditions. For example, calling napi_disable() multiple times in a row will deadlock. In the normal open and close paths, rtnl_mutex is acquired to prevent other callers. This is missing from veth_pool_store. Use rtnl_mutex in veth_pool_store fixes these hangs. Signed-off-by: Dave Marquardt <[email protected]> Fixes: 860f242 ("[PATCH] ibmveth change buffer pools dynamically") Reviewed-by: Nick Child <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]> (cherry picked from commit 1e458c2)

[ Upstream commit b61e69b ] syzbot report a deadlock in diFree. [1] When calling "ioctl$LOOP_SET_STATUS64", the offset value passed in is 4, which does not match the mounted loop device, causing the mapping of the mounted loop device to be invalidated. When creating the directory and creating the inode of iag in diReadSpecial(), read the page of fixed disk inode (AIT) in raw mode in read_metapage(), the metapage data it returns is corrupted, which causes the nlink value of 0 to be assigned to the iag inode when executing copy_from_dinode(), which ultimately causes a deadlock when entering diFree(). To avoid this, first check the nlink value of dinode before setting iag inode. [1] WARNING: possible recursive locking detected 6.12.0-rc7-syzkaller-00212-g4a5df3796467 #0 Not tainted -------------------------------------------- syz-executor301/5309 is trying to acquire lock: ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diFree+0x37c/0x2fb0 fs/jfs/jfs_imap.c:889 but task is already holding lock: ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diAlloc+0x1b6/0x1630 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(imap->im_aglock[index])); lock(&(imap->im_aglock[index])); *** DEADLOCK *** May be due to missing lock nesting notation 5 locks held by syz-executor301/5309: #0: ffff8880422a4420 (sb_writers#9){.+.+}-{0:0}, at: mnt_want_write+0x3f/0x90 fs/namespace.c:515 #1: ffff88804755b390 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}, at: inode_lock_nested include/linux/fs.h:850 [inline] #1: ffff88804755b390 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}, at: filename_create+0x260/0x540 fs/namei.c:4026 #2: ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diAlloc+0x1b6/0x1630 #3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diNewIAG fs/jfs/jfs_imap.c:2460 [inline] #3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diAllocExt fs/jfs/jfs_imap.c:1905 [inline] #3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diAllocAG+0x4b7/0x1e50 fs/jfs/jfs_imap.c:1669 #4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diNewIAG fs/jfs/jfs_imap.c:2477 [inline] #4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diAllocExt fs/jfs/jfs_imap.c:1905 [inline] #4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diAllocAG+0x869/0x1e50 fs/jfs/jfs_imap.c:1669 stack backtrace: CPU: 0 UID: 0 PID: 5309 Comm: syz-executor301 Not tainted 6.12.0-rc7-syzkaller-00212-g4a5df3796467 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_deadlock_bug+0x483/0x620 kernel/locking/lockdep.c:3037 check_deadlock kernel/locking/lockdep.c:3089 [inline] validate_chain+0x15e2/0x5920 kernel/locking/lockdep.c:3891 __lock_acquire+0x1384/0x2050 kernel/locking/lockdep.c:5202 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5825 __mutex_lock_common kernel/locking/mutex.c:608 [inline] __mutex_lock+0x136/0xd70 kernel/locking/mutex.c:752 diFree+0x37c/0x2fb0 fs/jfs/jfs_imap.c:889 jfs_evict_inode+0x32d/0x440 fs/jfs/inode.c:156 evict+0x4e8/0x9b0 fs/inode.c:725 diFreeSpecial fs/jfs/jfs_imap.c:552 [inline] duplicateIXtree+0x3c6/0x550 fs/jfs/jfs_imap.c:3022 diNewIAG fs/jfs/jfs_imap.c:2597 [inline] diAllocExt fs/jfs/jfs_imap.c:1905 [inline] diAllocAG+0x17dc/0x1e50 fs/jfs/jfs_imap.c:1669 diAlloc+0x1d2/0x1630 fs/jfs/jfs_imap.c:1590 ialloc+0x8f/0x900 fs/jfs/jfs_inode.c:56 jfs_mkdir+0x1c5/0xba0 fs/jfs/namei.c:225 vfs_mkdir+0x2f9/0x4f0 fs/namei.c:4257 do_mkdirat+0x264/0x3a0 fs/namei.c:4280 __do_sys_mkdirat fs/namei.c:4295 [inline] __se_sys_mkdirat fs/namei.c:4293 [inline] __x64_sys_mkdirat+0x87/0xa0 fs/namei.c:4293 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=355da3b3a74881008e8f Signed-off-by: Edward Adam Davis <[email protected]> Signed-off-by: Dave Kleikamp <[email protected]> Signed-off-by: Sasha Levin <[email protected]> (cherry picked from commit b3c4884)

…cesses commit ef01cac upstream. Acquire a lock on kvm->srcu when userspace is getting MP state to handle a rather extreme edge case where "accepting" APIC events, i.e. processing pending INIT or SIPI, can trigger accesses to guest memory. If the vCPU is in L2 with INIT *and* a TRIPLE_FAULT request pending, then getting MP state will trigger a nested VM-Exit by way of ->check_nested_events(), and emuating the nested VM-Exit can access guest memory. The splat was originally hit by syzkaller on a Google-internal kernel, and reproduced on an upstream kernel by hacking the triple_fault_event_test selftest to stuff a pending INIT, store an MSR on VM-Exit (to generate a memory access on VMX), and do vcpu_mp_state_get() to trigger the scenario. ============================= WARNING: suspicious RCU usage 6.14.0-rc3-b112d356288b-vmx/pi_lockdep_false_pos-lock #3 Not tainted ----------------------------- include/linux/kvm_host.h:1058 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by triple_fault_ev/1256: #0: ffff88810df5a330 (&vcpu->mutex){+.+.}-{4:4}, at: kvm_vcpu_ioctl+0x8b/0x9a0 [kvm] stack backtrace: CPU: 11 UID: 1000 PID: 1256 Comm: triple_fault_ev Not tainted 6.14.0-rc3-b112d356288b-vmx #3 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: <TASK> dump_stack_lvl+0x7f/0x90 lockdep_rcu_suspicious+0x144/0x190 kvm_vcpu_gfn_to_memslot+0x156/0x180 [kvm] kvm_vcpu_read_guest+0x3e/0x90 [kvm] read_and_check_msr_entry+0x2e/0x180 [kvm_intel] __nested_vmx_vmexit+0x550/0xde0 [kvm_intel] kvm_check_nested_events+0x1b/0x30 [kvm] kvm_apic_accept_events+0x33/0x100 [kvm] kvm_arch_vcpu_ioctl_get_mpstate+0x30/0x1d0 [kvm] kvm_vcpu_ioctl+0x33e/0x9a0 [kvm] __x64_sys_ioctl+0x8b/0xb0 do_syscall_64+0x6c/0x170 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> Cc: [email protected] Signed-off-by: Sean Christopherson <[email protected]> Message-ID: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> (cherry picked from commit 8a3df0a)

commit 5858b68 upstream. Kernel will hang on destroy admin_q while we create ctrl failed, such as following calltrace: PID: 23644 TASK: ff2d52b40f439fc0 CPU: 2 COMMAND: "nvme" #0 [ff61d23de260fb78] __schedule at ffffffff8323bc15 #1 [ff61d23de260fc08] schedule at ffffffff8323c014 #2 [ff61d23de260fc28] blk_mq_freeze_queue_wait at ffffffff82a3dba1 #3 [ff61d23de260fc78] blk_freeze_queue at ffffffff82a4113a #4 [ff61d23de260fc90] blk_cleanup_queue at ffffffff82a33006 #5 [ff61d23de260fcb0] nvme_rdma_destroy_admin_queue at ffffffffc12686ce #6 [ff61d23de260fcc8] nvme_rdma_setup_ctrl at ffffffffc1268ced #7 [ff61d23de260fd28] nvme_rdma_create_ctrl at ffffffffc126919b #8 [ff61d23de260fd68] nvmf_dev_write at ffffffffc024f362 #9 [ff61d23de260fe38] vfs_write at ffffffff827d5f25 RIP: 00007fda7891d574 RSP: 00007ffe2ef06958 RFLAGS: 00000202 RAX: ffffffffffffffda RBX: 000055e8122a4d90 RCX: 00007fda7891d574 RDX: 000000000000012b RSI: 000055e8122a4d90 RDI: 0000000000000004 RBP: 00007ffe2ef079c0 R8: 000000000000012b R9: 000055e8122a4d90 R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000004 R13: 000055e8122923c0 R14: 000000000000012b R15: 00007fda78a54500 ORIG_RAX: 0000000000000001 CS: 0033 SS: 002b This due to we have quiesced admi_q before cancel requests, but forgot to unquiesce before destroy it, as a result we fail to drain the pending requests, and hang on blk_mq_freeze_queue_wait() forever. Here try to reuse nvme_rdma_teardown_admin_queue() to fix this issue and simplify the code. Fixes: 958dc1d ("nvme-rdma: add clean action for failed reconnection") Reported-by: Yingfu.zhou <[email protected]> Signed-off-by: Chunguang.xu <[email protected]> Signed-off-by: Yue.zhao <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Signed-off-by: Keith Busch <[email protected]> [Minor context change fixed] Signed-off-by: Feng Liu <[email protected]> Signed-off-by: He Zhe <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> (cherry picked from commit 4270360)

[ Upstream commit 5da692e ] A cache device failing to resume due to mapping errors should not be retried, as the failure leaves a partially initialized policy object. Repeating the resume operation risks triggering BUG_ON when reloading cache mappings into the incomplete policy object. Reproduce steps: 1. create a cache metadata consisting of 512 or more cache blocks, with some mappings stored in the first array block of the mapping array. Here we use cache_restore v1.0 to build the metadata. cat <<EOF >> cmeta.xml <superblock uuid="" block_size="128" nr_cache_blocks="512" \ policy="smq" hint_width="4"> <mappings> <mapping cache_block="0" origin_block="0" dirty="false"/> </mappings> </superblock> EOF dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" cache_restore -i cmeta.xml -o /dev/mapper/cmeta --metadata-version=2 dmsetup remove cmeta 2. wipe the second array block of the mapping array to simulate data degradations. mapping_root=$(dd if=/dev/sdc bs=1c count=8 skip=192 \ 2>/dev/null | hexdump -e '1/8 "%u\n"') ablock=$(dd if=/dev/sdc bs=1c count=8 skip=$((4096*mapping_root+2056)) \ 2>/dev/null | hexdump -e '1/8 "%u\n"') dd if=/dev/zero of=/dev/sdc bs=4k count=1 seek=$ablock 3. try bringing up the cache device. The resume is expected to fail due to the broken array block. dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 65536 linear /dev/sdc 8192" dmsetup create corig --table "0 524288 linear /dev/sdc 262144" dmsetup create cache --notable dmsetup load cache --table "0 524288 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" dmsetup resume cache 4. try resuming the cache again. An unexpected BUG_ON is triggered while loading cache mappings. dmsetup resume cache Kernel logs: (snip) ------------[ cut here ]------------ kernel BUG at drivers/md/dm-cache-policy-smq.c:752! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 UID: 0 PID: 332 Comm: dmsetup Not tainted 6.13.4 #3 RIP: 0010:smq_load_mapping+0x3e5/0x570 Fix by disallowing resume operations for devices that failed the initial attempt. Signed-off-by: Ming-Hung Tsai <[email protected]> Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Sasha Levin <[email protected]> (cherry picked from commit cc80a5cc520939d0a7d071cc4ae4b3c55ef171d0)

[ Upstream commit 88f7f56 ] When a bio with REQ_PREFLUSH is submitted to dm, __send_empty_flush() generates a flush_bio with REQ_OP_WRITE | REQ_PREFLUSH | REQ_SYNC, which causes the flush_bio to be throttled by wbt_wait(). An example from v5.4, similar problem also exists in upstream: crash> bt 2091206 PID: 2091206 TASK: ffff2050df92a300 CPU: 109 COMMAND: "kworker/u260:0" #0 [ffff800084a2f7f0] __switch_to at ffff80004008aeb8 #1 [ffff800084a2f820] __schedule at ffff800040bfa0c4 #2 [ffff800084a2f880] schedule at ffff800040bfa4b4 #3 [ffff800084a2f8a0] io_schedule at ffff800040bfa9c4 #4 [ffff800084a2f8c0] rq_qos_wait at ffff8000405925bc #5 [ffff800084a2f940] wbt_wait at ffff8000405bb3a0 #6 [ffff800084a2f9a0] __rq_qos_throttle at ffff800040592254 #7 [ffff800084a2f9c0] blk_mq_make_request at ffff80004057cf38 #8 [ffff800084a2fa60] generic_make_request at ffff800040570138 #9 [ffff800084a2fae0] submit_bio at ffff8000405703b4 #10 [ffff800084a2fb50] xlog_write_iclog at ffff800001280834 [xfs] #11 [ffff800084a2fbb0] xlog_sync at ffff800001280c3c [xfs] #12 [ffff800084a2fbf0] xlog_state_release_iclog at ffff800001280df4 [xfs] #13 [ffff800084a2fc10] xlog_write at ffff80000128203c [xfs] #14 [ffff800084a2fcd0] xlog_cil_push at ffff8000012846dc [xfs] #15 [ffff800084a2fda0] xlog_cil_push_work at ffff800001284a2c [xfs] #16 [ffff800084a2fdb0] process_one_work at ffff800040111d08 #17 [ffff800084a2fe00] worker_thread at ffff8000401121cc #18 [ffff800084a2fe70] kthread at ffff800040118de4 After commit 2def284 ("xfs: don't allow log IO to be throttled"), the metadata submitted by xlog_write_iclog() should not be throttled. But due to the existence of the dm layer, throttling flush_bio indirectly causes the metadata bio to be throttled. Fix this by conditionally adding REQ_IDLE to flush_bio.bi_opf, which makes wbt_should_throttle() return false to avoid wbt_wait(). Signed-off-by: Jinliang Zheng <[email protected]> Reviewed-by: Tianxiang Peng <[email protected]> Reviewed-by: Hao Peng <[email protected]> Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Sasha Levin <[email protected]> (cherry picked from commit b55a97d1bd4083729a60d19beffe85d4c96680de)

[ Upstream commit 5da692e ] A cache device failing to resume due to mapping errors should not be retried, as the failure leaves a partially initialized policy object. Repeating the resume operation risks triggering BUG_ON when reloading cache mappings into the incomplete policy object. Reproduce steps: 1. create a cache metadata consisting of 512 or more cache blocks, with some mappings stored in the first array block of the mapping array. Here we use cache_restore v1.0 to build the metadata. cat <<EOF >> cmeta.xml <superblock uuid="" block_size="128" nr_cache_blocks="512" \ policy="smq" hint_width="4"> <mappings> <mapping cache_block="0" origin_block="0" dirty="false"/> </mappings> </superblock> EOF dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" cache_restore -i cmeta.xml -o /dev/mapper/cmeta --metadata-version=2 dmsetup remove cmeta 2. wipe the second array block of the mapping array to simulate data degradations. mapping_root=$(dd if=/dev/sdc bs=1c count=8 skip=192 \ 2>/dev/null | hexdump -e '1/8 "%u\n"') ablock=$(dd if=/dev/sdc bs=1c count=8 skip=$((4096*mapping_root+2056)) \ 2>/dev/null | hexdump -e '1/8 "%u\n"') dd if=/dev/zero of=/dev/sdc bs=4k count=1 seek=$ablock 3. try bringing up the cache device. The resume is expected to fail due to the broken array block. dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 65536 linear /dev/sdc 8192" dmsetup create corig --table "0 524288 linear /dev/sdc 262144" dmsetup create cache --notable dmsetup load cache --table "0 524288 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" dmsetup resume cache 4. try resuming the cache again. An unexpected BUG_ON is triggered while loading cache mappings. dmsetup resume cache Kernel logs: (snip) ------------[ cut here ]------------ kernel BUG at drivers/md/dm-cache-policy-smq.c:752! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 UID: 0 PID: 332 Comm: dmsetup Not tainted 6.13.4 #3 RIP: 0010:smq_load_mapping+0x3e5/0x570 Fix by disallowing resume operations for devices that failed the initial attempt. Signed-off-by: Ming-Hung Tsai <[email protected]> Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 88f7f56 ] When a bio with REQ_PREFLUSH is submitted to dm, __send_empty_flush() generates a flush_bio with REQ_OP_WRITE | REQ_PREFLUSH | REQ_SYNC, which causes the flush_bio to be throttled by wbt_wait(). An example from v5.4, similar problem also exists in upstream: crash> bt 2091206 PID: 2091206 TASK: ffff2050df92a300 CPU: 109 COMMAND: "kworker/u260:0" #0 [ffff800084a2f7f0] __switch_to at ffff80004008aeb8 #1 [ffff800084a2f820] __schedule at ffff800040bfa0c4 #2 [ffff800084a2f880] schedule at ffff800040bfa4b4 #3 [ffff800084a2f8a0] io_schedule at ffff800040bfa9c4 #4 [ffff800084a2f8c0] rq_qos_wait at ffff8000405925bc #5 [ffff800084a2f940] wbt_wait at ffff8000405bb3a0 #6 [ffff800084a2f9a0] __rq_qos_throttle at ffff800040592254 #7 [ffff800084a2f9c0] blk_mq_make_request at ffff80004057cf38 #8 [ffff800084a2fa60] generic_make_request at ffff800040570138 #9 [ffff800084a2fae0] submit_bio at ffff8000405703b4 #10 [ffff800084a2fb50] xlog_write_iclog at ffff800001280834 [xfs] #11 [ffff800084a2fbb0] xlog_sync at ffff800001280c3c [xfs] #12 [ffff800084a2fbf0] xlog_state_release_iclog at ffff800001280df4 [xfs] #13 [ffff800084a2fc10] xlog_write at ffff80000128203c [xfs] #14 [ffff800084a2fcd0] xlog_cil_push at ffff8000012846dc [xfs] #15 [ffff800084a2fda0] xlog_cil_push_work at ffff800001284a2c [xfs] #16 [ffff800084a2fdb0] process_one_work at ffff800040111d08 #17 [ffff800084a2fe00] worker_thread at ffff8000401121cc #18 [ffff800084a2fe70] kthread at ffff800040118de4 After commit 2def284 ("xfs: don't allow log IO to be throttled"), the metadata submitted by xlog_write_iclog() should not be throttled. But due to the existence of the dm layer, throttling flush_bio indirectly causes the metadata bio to be throttled. Fix this by conditionally adding REQ_IDLE to flush_bio.bi_opf, which makes wbt_should_throttle() return false to avoid wbt_wait(). Signed-off-by: Jinliang Zheng <[email protected]> Reviewed-by: Tianxiang Peng <[email protected]> Reviewed-by: Hao Peng <[email protected]> Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 5da692e ] A cache device failing to resume due to mapping errors should not be retried, as the failure leaves a partially initialized policy object. Repeating the resume operation risks triggering BUG_ON when reloading cache mappings into the incomplete policy object. Reproduce steps: 1. create a cache metadata consisting of 512 or more cache blocks, with some mappings stored in the first array block of the mapping array. Here we use cache_restore v1.0 to build the metadata. cat <<EOF >> cmeta.xml <superblock uuid="" block_size="128" nr_cache_blocks="512" \ policy="smq" hint_width="4"> <mappings> <mapping cache_block="0" origin_block="0" dirty="false"/> </mappings> </superblock> EOF dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" cache_restore -i cmeta.xml -o /dev/mapper/cmeta --metadata-version=2 dmsetup remove cmeta 2. wipe the second array block of the mapping array to simulate data degradations. mapping_root=$(dd if=/dev/sdc bs=1c count=8 skip=192 \ 2>/dev/null | hexdump -e '1/8 "%u\n"') ablock=$(dd if=/dev/sdc bs=1c count=8 skip=$((4096*mapping_root+2056)) \ 2>/dev/null | hexdump -e '1/8 "%u\n"') dd if=/dev/zero of=/dev/sdc bs=4k count=1 seek=$ablock 3. try bringing up the cache device. The resume is expected to fail due to the broken array block. dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 65536 linear /dev/sdc 8192" dmsetup create corig --table "0 524288 linear /dev/sdc 262144" dmsetup create cache --notable dmsetup load cache --table "0 524288 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" dmsetup resume cache 4. try resuming the cache again. An unexpected BUG_ON is triggered while loading cache mappings. dmsetup resume cache Kernel logs: (snip) ------------[ cut here ]------------ kernel BUG at drivers/md/dm-cache-policy-smq.c:752! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 UID: 0 PID: 332 Comm: dmsetup Not tainted 6.13.4 #3 RIP: 0010:smq_load_mapping+0x3e5/0x570 Fix by disallowing resume operations for devices that failed the initial attempt. Signed-off-by: Ming-Hung Tsai <[email protected]> Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Sasha Levin <[email protected]> (cherry picked from commit 3986ef4a9b6a0d9c28bc325d8713beba5e67586f)

[ Upstream commit 88f7f56 ] When a bio with REQ_PREFLUSH is submitted to dm, __send_empty_flush() generates a flush_bio with REQ_OP_WRITE | REQ_PREFLUSH | REQ_SYNC, which causes the flush_bio to be throttled by wbt_wait(). An example from v5.4, similar problem also exists in upstream: crash> bt 2091206 PID: 2091206 TASK: ffff2050df92a300 CPU: 109 COMMAND: "kworker/u260:0" #0 [ffff800084a2f7f0] __switch_to at ffff80004008aeb8 #1 [ffff800084a2f820] __schedule at ffff800040bfa0c4 #2 [ffff800084a2f880] schedule at ffff800040bfa4b4 #3 [ffff800084a2f8a0] io_schedule at ffff800040bfa9c4 #4 [ffff800084a2f8c0] rq_qos_wait at ffff8000405925bc #5 [ffff800084a2f940] wbt_wait at ffff8000405bb3a0 #6 [ffff800084a2f9a0] __rq_qos_throttle at ffff800040592254 #7 [ffff800084a2f9c0] blk_mq_make_request at ffff80004057cf38 #8 [ffff800084a2fa60] generic_make_request at ffff800040570138 #9 [ffff800084a2fae0] submit_bio at ffff8000405703b4 #10 [ffff800084a2fb50] xlog_write_iclog at ffff800001280834 [xfs] #11 [ffff800084a2fbb0] xlog_sync at ffff800001280c3c [xfs] #12 [ffff800084a2fbf0] xlog_state_release_iclog at ffff800001280df4 [xfs] #13 [ffff800084a2fc10] xlog_write at ffff80000128203c [xfs] #14 [ffff800084a2fcd0] xlog_cil_push at ffff8000012846dc [xfs] #15 [ffff800084a2fda0] xlog_cil_push_work at ffff800001284a2c [xfs] #16 [ffff800084a2fdb0] process_one_work at ffff800040111d08 #17 [ffff800084a2fe00] worker_thread at ffff8000401121cc #18 [ffff800084a2fe70] kthread at ffff800040118de4 After commit 2def284 ("xfs: don't allow log IO to be throttled"), the metadata submitted by xlog_write_iclog() should not be throttled. But due to the existence of the dm layer, throttling flush_bio indirectly causes the metadata bio to be throttled. Fix this by conditionally adding REQ_IDLE to flush_bio.bi_opf, which makes wbt_should_throttle() return false to avoid wbt_wait(). Signed-off-by: Jinliang Zheng <[email protected]> Reviewed-by: Tianxiang Peng <[email protected]> Reviewed-by: Hao Peng <[email protected]> Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Sasha Levin <[email protected]> (cherry picked from commit 52aa28f7b1708d76e315d78b5ed397932a1a97c3)

[ Upstream commit ee684de5c1b0ac01821320826baec7da93f3615b ] As shown in [1], it is possible to corrupt a BPF ELF file such that arbitrary BPF instructions are loaded by libbpf. This can be done by setting a symbol (BPF program) section offset to a large (unsigned) number such that <section start + symbol offset> overflows and points before the section data in the memory. Consider the situation below where: - prog_start = sec_start + symbol_offset <-- size_t overflow here - prog_end = prog_start + prog_size prog_start sec_start prog_end sec_end | | | | v v v v .....................|################################|............ The report in [1] also provides a corrupted BPF ELF which can be used as a reproducer: $ readelf -S crash Section Headers: [Nr] Name Type Address Offset Size EntSize Flags Link Info Align ... [ 2] uretprobe.mu[...] PROGBITS 0000000000000000 00000040 0000000000000068 0000000000000000 AX 0 0 8 $ readelf -s crash Symbol table '.symtab' contains 8 entries: Num: Value Size Type Bind Vis Ndx Name ... 6: ffffffffffffffb8 104 FUNC GLOBAL DEFAULT 2 handle_tp Here, the handle_tp prog has section offset ffffffffffffffb8, i.e. will point before the actual memory where section 2 is allocated. This is also reported by AddressSanitizer: ================================================================= ==1232==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x7c7302fe0000 at pc 0x7fc3046e4b77 bp 0x7ffe64677cd0 sp 0x7ffe64677490 READ of size 104 at 0x7c7302fe0000 thread T0 #0 0x7fc3046e4b76 in memcpy (/lib64/libasan.so.8+0xe4b76) #1 0x00000040df3e in bpf_object__init_prog /src/libbpf/src/libbpf.c:856 #2 0x00000040df3e in bpf_object__add_programs /src/libbpf/src/libbpf.c:928 #3 0x00000040df3e in bpf_object__elf_collect /src/libbpf/src/libbpf.c:3930 #4 0x00000040df3e in bpf_object_open /src/libbpf/src/libbpf.c:8067 #5 0x00000040f176 in bpf_object__open_file /src/libbpf/src/libbpf.c:8090 #6 0x000000400c16 in main /poc/poc.c:8 #7 0x7fc3043d25b4 in __libc_start_call_main (/lib64/libc.so.6+0x35b4) #8 0x7fc3043d2667 in __libc_start_main@@GLIBC_2.34 (/lib64/libc.so.6+0x3667) #9 0x000000400b34 in _start (/poc/poc+0x400b34) 0x7c7302fe0000 is located 64 bytes before 104-byte region [0x7c7302fe0040,0x7c7302fe00a8) allocated by thread T0 here: #0 0x7fc3046e716b in malloc (/lib64/libasan.so.8+0xe716b) #1 0x7fc3045ee600 in __libelf_set_rawdata_wrlock (/lib64/libelf.so.1+0xb600) #2 0x7fc3045ef018 in __elf_getdata_rdlock (/lib64/libelf.so.1+0xc018) #3 0x00000040642f in elf_sec_data /src/libbpf/src/libbpf.c:3740 The problem here is that currently, libbpf only checks that the program end is within the section bounds. There used to be a check `while (sec_off < sec_sz)` in bpf_object__add_programs, however, it was removed by commit 6245947 ("libbpf: Allow gaps in BPF program sections to support overriden weak functions"). Add a check for detecting the overflow of `sec_off + prog_sz` to bpf_object__init_prog to fix this issue. [1] https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md Fixes: 6245947 ("libbpf: Allow gaps in BPF program sections to support overriden weak functions") Reported-by: lmarch2 <[email protected]> Signed-off-by: Viktor Malik <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Reviewed-by: Shung-Hsi Yu <[email protected]> Link: https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]> (cherry picked from commit 18eb7b5f1e51fd2e03d1866a78c209b585f40254)

[ Upstream commit ee684de5c1b0ac01821320826baec7da93f3615b ] As shown in [1], it is possible to corrupt a BPF ELF file such that arbitrary BPF instructions are loaded by libbpf. This can be done by setting a symbol (BPF program) section offset to a large (unsigned) number such that <section start + symbol offset> overflows and points before the section data in the memory. Consider the situation below where: - prog_start = sec_start + symbol_offset <-- size_t overflow here - prog_end = prog_start + prog_size prog_start sec_start prog_end sec_end | | | | v v v v .....................|################################|............ The report in [1] also provides a corrupted BPF ELF which can be used as a reproducer: $ readelf -S crash Section Headers: [Nr] Name Type Address Offset Size EntSize Flags Link Info Align ... [ 2] uretprobe.mu[...] PROGBITS 0000000000000000 00000040 0000000000000068 0000000000000000 AX 0 0 8 $ readelf -s crash Symbol table '.symtab' contains 8 entries: Num: Value Size Type Bind Vis Ndx Name ... 6: ffffffffffffffb8 104 FUNC GLOBAL DEFAULT 2 handle_tp Here, the handle_tp prog has section offset ffffffffffffffb8, i.e. will point before the actual memory where section 2 is allocated. This is also reported by AddressSanitizer: ================================================================= ==1232==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x7c7302fe0000 at pc 0x7fc3046e4b77 bp 0x7ffe64677cd0 sp 0x7ffe64677490 READ of size 104 at 0x7c7302fe0000 thread T0 #0 0x7fc3046e4b76 in memcpy (/lib64/libasan.so.8+0xe4b76) #1 0x00000040df3e in bpf_object__init_prog /src/libbpf/src/libbpf.c:856 #2 0x00000040df3e in bpf_object__add_programs /src/libbpf/src/libbpf.c:928 #3 0x00000040df3e in bpf_object__elf_collect /src/libbpf/src/libbpf.c:3930 #4 0x00000040df3e in bpf_object_open /src/libbpf/src/libbpf.c:8067 #5 0x00000040f176 in bpf_object__open_file /src/libbpf/src/libbpf.c:8090 #6 0x000000400c16 in main /poc/poc.c:8 #7 0x7fc3043d25b4 in __libc_start_call_main (/lib64/libc.so.6+0x35b4) #8 0x7fc3043d2667 in __libc_start_main@@GLIBC_2.34 (/lib64/libc.so.6+0x3667) #9 0x000000400b34 in _start (/poc/poc+0x400b34) 0x7c7302fe0000 is located 64 bytes before 104-byte region [0x7c7302fe0040,0x7c7302fe00a8) allocated by thread T0 here: #0 0x7fc3046e716b in malloc (/lib64/libasan.so.8+0xe716b) #1 0x7fc3045ee600 in __libelf_set_rawdata_wrlock (/lib64/libelf.so.1+0xb600) #2 0x7fc3045ef018 in __elf_getdata_rdlock (/lib64/libelf.so.1+0xc018) #3 0x00000040642f in elf_sec_data /src/libbpf/src/libbpf.c:3740 The problem here is that currently, libbpf only checks that the program end is within the section bounds. There used to be a check `while (sec_off < sec_sz)` in bpf_object__add_programs, however, it was removed by commit 6245947 ("libbpf: Allow gaps in BPF program sections to support overriden weak functions"). Add a check for detecting the overflow of `sec_off + prog_sz` to bpf_object__init_prog to fix this issue. [1] https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md Fixes: 6245947 ("libbpf: Allow gaps in BPF program sections to support overriden weak functions") Reported-by: lmarch2 <[email protected]> Signed-off-by: Viktor Malik <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Reviewed-by: Shung-Hsi Yu <[email protected]> Link: https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]> (cherry picked from commit 9d57de88d940b23ddb93b7f6ae670fb3369455ae)

commit c98cc9797b7009308fff73d41bc1d08642dab77a upstream. Running a modified trace-cmd record --nosplice where it does a mmap of the ring buffer when '--nosplice' is set, caused the following lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 6.15.0-rc7-test-00002-gfb7d03d8a82f #551 Not tainted ------------------------------------------------------ trace-cmd/1113 is trying to acquire lock: ffff888100062888 (&buffer->mutex){+.+.}-{4:4}, at: ring_buffer_map+0x11c/0xe70 but task is already holding lock: ffff888100a5f9f8 (&cpu_buffer->mapping_lock){+.+.}-{4:4}, at: ring_buffer_map+0xcf/0xe70 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #5 (&cpu_buffer->mapping_lock){+.+.}-{4:4}: __mutex_lock+0x192/0x18c0 ring_buffer_map+0xcf/0xe70 tracing_buffers_mmap+0x1c4/0x3b0 __mmap_region+0xd8d/0x1f70 do_mmap+0x9d7/0x1010 vm_mmap_pgoff+0x20b/0x390 ksys_mmap_pgoff+0x2e9/0x440 do_syscall_64+0x79/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #4 (&mm->mmap_lock){++++}-{4:4}: __might_fault+0xa5/0x110 _copy_to_user+0x22/0x80 _perf_ioctl+0x61b/0x1b70 perf_ioctl+0x62/0x90 __x64_sys_ioctl+0x134/0x190 do_syscall_64+0x79/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #3 (&cpuctx_mutex){+.+.}-{4:4}: __mutex_lock+0x192/0x18c0 perf_event_init_cpu+0x325/0x7c0 perf_event_init+0x52a/0x5b0 start_kernel+0x263/0x3e0 x86_64_start_reservations+0x24/0x30 x86_64_start_kernel+0x95/0xa0 common_startup_64+0x13e/0x141 -> #2 (pmus_lock){+.+.}-{4:4}: __mutex_lock+0x192/0x18c0 perf_event_init_cpu+0xb7/0x7c0 cpuhp_invoke_callback+0x2c0/0x1030 __cpuhp_invoke_callback_range+0xbf/0x1f0 _cpu_up+0x2e7/0x690 cpu_up+0x117/0x170 cpuhp_bringup_mask+0xd5/0x120 bringup_nonboot_cpus+0x13d/0x170 smp_init+0x2b/0xf0 kernel_init_freeable+0x441/0x6d0 kernel_init+0x1e/0x160 ret_from_fork+0x34/0x70 ret_from_fork_asm+0x1a/0x30 -> #1 (cpu_hotplug_lock){++++}-{0:0}: cpus_read_lock+0x2a/0xd0 ring_buffer_resize+0x610/0x14e0 __tracing_resize_ring_buffer.part.0+0x42/0x120 tracing_set_tracer+0x7bd/0xa80 tracing_set_trace_write+0x132/0x1e0 vfs_write+0x21c/0xe80 ksys_write+0xf9/0x1c0 do_syscall_64+0x79/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (&buffer->mutex){+.+.}-{4:4}: __lock_acquire+0x1405/0x2210 lock_acquire+0x174/0x310 __mutex_lock+0x192/0x18c0 ring_buffer_map+0x11c/0xe70 tracing_buffers_mmap+0x1c4/0x3b0 __mmap_region+0xd8d/0x1f70 do_mmap+0x9d7/0x1010 vm_mmap_pgoff+0x20b/0x390 ksys_mmap_pgoff+0x2e9/0x440 do_syscall_64+0x79/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e other info that might help us debug this: Chain exists of: &buffer->mutex --> &mm->mmap_lock --> &cpu_buffer->mapping_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&cpu_buffer->mapping_lock); lock(&mm->mmap_lock); lock(&cpu_buffer->mapping_lock); lock(&buffer->mutex); *** DEADLOCK *** 2 locks held by trace-cmd/1113: #0: ffff888106b847e0 (&mm->mmap_lock){++++}-{4:4}, at: vm_mmap_pgoff+0x192/0x390 #1: ffff888100a5f9f8 (&cpu_buffer->mapping_lock){+.+.}-{4:4}, at: ring_buffer_map+0xcf/0xe70 stack backtrace: CPU: 5 UID: 0 PID: 1113 Comm: trace-cmd Not tainted 6.15.0-rc7-test-00002-gfb7d03d8a82f #551 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x6e/0xa0 print_circular_bug.cold+0x178/0x1be check_noncircular+0x146/0x160 __lock_acquire+0x1405/0x2210 lock_acquire+0x174/0x310 ? ring_buffer_map+0x11c/0xe70 ? ring_buffer_map+0x11c/0xe70 ? __mutex_lock+0x169/0x18c0 __mutex_lock+0x192/0x18c0 ? ring_buffer_map+0x11c/0xe70 ? ring_buffer_map+0x11c/0xe70 ? function_trace_call+0x296/0x370 ? __pfx___mutex_lock+0x10/0x10 ? __pfx_function_trace_call+0x10/0x10 ? __pfx___mutex_lock+0x10/0x10 ? _raw_spin_unlock+0x2d/0x50 ? ring_buffer_map+0x11c/0xe70 ? ring_buffer_map+0x11c/0xe70 ? __mutex_lock+0x5/0x18c0 ring_buffer_map+0x11c/0xe70 ? do_raw_spin_lock+0x12d/0x270 ? find_held_lock+0x2b/0x80 ? _raw_spin_unlock+0x2d/0x50 ? rcu_is_watching+0x15/0xb0 ? _raw_spin_unlock+0x2d/0x50 ? trace_preempt_on+0xd0/0x110 tracing_buffers_mmap+0x1c4/0x3b0 __mmap_region+0xd8d/0x1f70 ? ring_buffer_lock_reserve+0x99/0xff0 ? __pfx___mmap_region+0x10/0x10 ? ring_buffer_lock_reserve+0x99/0xff0 ? __pfx_ring_buffer_lock_reserve+0x10/0x10 ? __pfx_ring_buffer_lock_reserve+0x10/0x10 ? bpf_lsm_mmap_addr+0x4/0x10 ? security_mmap_addr+0x46/0xd0 ? lock_is_held_type+0xd9/0x130 do_mmap+0x9d7/0x1010 ? 0xffffffffc0370095 ? __pfx_do_mmap+0x10/0x10 vm_mmap_pgoff+0x20b/0x390 ? __pfx_vm_mmap_pgoff+0x10/0x10 ? 0xffffffffc0370095 ksys_mmap_pgoff+0x2e9/0x440 do_syscall_64+0x79/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fb0963a7de2 Code: 00 00 00 0f 1f 44 00 00 41 f7 c1 ff 0f 00 00 75 27 55 89 cd 53 48 89 fb 48 85 ff 74 3b 41 89 ea 48 89 df b8 09 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 76 5b 5d c3 0f 1f 00 48 8b 05 e1 9f 0d 00 64 RSP: 002b:00007ffdcc8fb878 EFLAGS: 00000246 ORIG_RAX: 0000000000000009 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fb0963a7de2 RDX: 0000000000000001 RSI: 0000000000001000 RDI: 0000000000000000 RBP: 0000000000000001 R08: 0000000000000006 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffdcc8fbe68 R14: 00007fb096628000 R15: 00005633e01a5c90 </TASK> The issue is that cpus_read_lock() is taken within buffer->mutex. The memory mapped pages are taken with the mmap_lock held. The buffer->mutex is taken within the cpu_buffer->mapping_lock. There's quite a chain with all these locks, where the deadlock can be fixed by moving the cpus_read_lock() outside the taking of the buffer->mutex. Cc: [email protected] Cc: Masami Hiramatsu <[email protected]> Cc: Mathieu Desnoyers <[email protected]> Cc: Vincent Donnefort <[email protected]> Link: https://lore.kernel.org/[email protected] Fixes: 117c392 ("ring-buffer: Introducing ring-buffer mapping functions") Signed-off-by: Steven Rostedt (Google) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> (cherry picked from commit 2d6a6cfe969f246c616b0b0f65253060838d58a8)

[ Upstream commit eedf3e3c2f2af55dca42b0ea81dffb808211d269 ] ACPICA commit 1c28da2242783579d59767617121035dafba18c3 This was originally done in NetBSD: NetBSD/src@b69d1ac and is the correct alternative to the smattering of `memcpy`s I previously contributed to this repository. This also sidesteps the newly strict checks added in UBSAN: llvm/llvm-project@7926744 Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x000021afcfdeca5e in acpi_rs_get_address_common(struct acpi_resource*, union aml_resource*) ../../third_party/acpica/source/components/resources/rsaddr.c:329 <platform-bus-x86.so>+0x6aca5e #1.2 0x000021982bc4af3c in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x41f3c #1.1 0x000021982bc4af3c in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x41f3c #1 0x000021982bc4af3c in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:395 <libclang_rt.asan.so>+0x41f3c #2 0x000021982bc4bb6f in handletype_mismatch_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:137 <libclang_rt.asan.so>+0x42b6f #3 0x000021982bc4b723 in __ubsan_handle_type_mismatch_v1 compiler-rt/lib/ubsan/ubsan_handlers.cpp:142 <libclang_rt.asan.so>+0x42723 #4 0x000021afcfdeca5e in acpi_rs_get_address_common(struct acpi_resource*, union aml_resource*) ../../third_party/acpica/source/components/resources/rsaddr.c:329 <platform-bus-x86.so>+0x6aca5e #5 0x000021afcfdf2089 in acpi_rs_convert_aml_to_resource(struct acpi_resource*, union aml_resource*, struct acpi_rsconvert_info*) ../../third_party/acpica/source/components/resources/rsmisc.c:355 <platform-bus-x86.so>+0x6b2089 #6 0x000021afcfded169 in acpi_rs_convert_aml_to_resources(u8*, u32, u32, u8, void**) ../../third_party/acpica/source/components/resources/rslist.c:137 <platform-bus-x86.so>+0x6ad169 #7 0x000021afcfe2d24a in acpi_ut_walk_aml_resources(struct acpi_walk_state*, u8*, acpi_size, acpi_walk_aml_callback, void**) ../../third_party/acpica/source/components/utilities/utresrc.c:237 <platform-bus-x86.so>+0x6ed24a #8 0x000021afcfde66b7 in acpi_rs_create_resource_list(union acpi_operand_object*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rscreate.c:199 <platform-bus-x86.so>+0x6a66b7 #9 0x000021afcfdf6979 in acpi_rs_get_method_data(acpi_handle, const char*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rsutils.c:770 <platform-bus-x86.so>+0x6b6979 #10 0x000021afcfdf708f in acpi_walk_resources(acpi_handle, char*, acpi_walk_resource_callback, void*) ../../third_party/acpica/source/components/resources/rsxface.c:731 <platform-bus-x86.so>+0x6b708f #11 0x000021afcfa95dcf in acpi::acpi_impl::walk_resources(acpi::acpi_impl*, acpi_handle, const char*, acpi::Acpi::resources_callable) ../../src/devices/board/lib/acpi/acpi-impl.cc:41 <platform-bus-x86.so>+0x355dcf #12 0x000021afcfaa8278 in acpi::device_builder::gather_resources(acpi::device_builder*, acpi::Acpi*, fidl::any_arena&, acpi::Manager*, acpi::device_builder::gather_resources_callback) ../../src/devices/board/lib/acpi/device-builder.cc:84 <platform-bus-x86.so>+0x368278 #13 0x000021afcfbddb87 in acpi::Manager::configure_discovered_devices(acpi::Manager*) ../../src/devices/board/lib/acpi/manager.cc:75 <platform-bus-x86.so>+0x49db87 #14 0x000021afcf99091d in publish_acpi_devices(acpi::Manager*, zx_device_t*, zx_device_t*) ../../src/devices/board/drivers/x86/acpi-nswalk.cc:95 <platform-bus-x86.so>+0x25091d #15 0x000021afcf9c1d4e in x86::X86::do_init(x86::X86*) ../../src/devices/board/drivers/x86/x86.cc:60 <platform-bus-x86.so>+0x281d4e #16 0x000021afcf9e33ad in λ(x86::X86::ddk_init::(anon class)*) ../../src/devices/board/drivers/x86/x86.cc:77 <platform-bus-x86.so>+0x2a33ad #17 0x000021afcf9e313e in fit::internal::target<(lambda at../../src/devices/board/drivers/x86/x86.cc:76:19), false, false, std::__2::allocator<std::byte>, void>::invoke(void*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:183 <platform-bus-x86.so>+0x2a313e #18 0x000021afcfbab4c7 in fit::internal::function_base<16UL, false, void(), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<16UL, false, void (), std::__2::allocator<std::byte> >*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <platform-bus-x86.so>+0x46b4c7 #19 0x000021afcfbab342 in fit::function_impl<16UL, false, void(), std::__2::allocator<std::byte>>::operator()(const fit::function_impl<16UL, false, void (), std::__2::allocator<std::byte> >*) ../../sdk/lib/fit/include/lib/fit/function.h:315 <platform-bus-x86.so>+0x46b342 #20 0x000021afcfcd98c3 in async::internal::retained_task::Handler(async_dispatcher_t*, async_task_t*, zx_status_t) ../../sdk/lib/async/task.cc:24 <platform-bus-x86.so>+0x5998c3 #21 0x00002290f9924616 in λ(const driver_runtime::Dispatcher::post_task::(anon class)*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/dispatcher.cc:789 <libdriver_runtime.so>+0x10a616 #22 0x00002290f9924323 in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:788:7), true, false, std::__2::allocator<std::byte>, void, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int>::invoke(void*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0x10a323 #23 0x00002290f9904b76 in fit::internal::function_base<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <libdriver_runtime.so>+0xeab76 #24 0x00002290f9904831 in fit::callback_impl<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int), std::__2::allocator<std::byte>>::operator()(fit::callback_impl<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/function.h:471 <libdriver_runtime.so>+0xea831 #25 0x00002290f98d5adc in driver_runtime::callback_request::Call(driver_runtime::callback_request*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/callback_request.h:74 <libdriver_runtime.so>+0xbbadc #26 0x00002290f98e1e58 in driver_runtime::Dispatcher::dispatch_callback(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >) ../../src/devices/bin/driver_runtime/dispatcher.cc:1248 <libdriver_runtime.so>+0xc7e58 #27 0x00002290f98e4159 in driver_runtime::Dispatcher::dispatch_callbacks(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.cc:1308 <libdriver_runtime.so>+0xca159 #28 0x00002290f9918414 in λ(const driver_runtime::Dispatcher::create_with_adder::(anon class)*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.cc:353 <libdriver_runtime.so>+0xfe414 #29 0x00002290f991812d in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:351:7), true, false, std::__2::allocator<std::byte>, void, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>>::invoke(void*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0xfe12d #30 0x00002290f9906fc7 in fit::internal::function_base<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <libdriver_runtime.so>+0xecfc7 #31 0x00002290f9906c66 in fit::function_impl<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte>>::operator()(const fit::function_impl<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/function.h:315 <libdriver_runtime.so>+0xecc66 #32 0x00002290f98e73d9 in driver_runtime::Dispatcher::event_waiter::invoke_callback(driver_runtime::Dispatcher::event_waiter*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.h:543 <libdriver_runtime.so>+0xcd3d9 #33 0x00002290f98e700d in driver_runtime::Dispatcher::event_waiter::handle_event(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, async_dispatcher_t*, async::wait_base*, zx_status_t, zx_packet_signal_t const*) ../../src/devices/bin/driver_runtime/dispatcher.cc:1442 <libdriver_runtime.so>+0xcd00d #34 0x00002290f9918983 in async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event(async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>*, async_dispatcher_t*, async::wait_base*, zx_status_t, zx_packet_signal_t const*) ../../src/devices/bin/driver_runtime/async_loop_owned_event_handler.h:59 <libdriver_runtime.so>+0xfe983 #35 0x00002290f9918b9e in async::wait_method<async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>, &async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event>::call_handler(async_dispatcher_t*, async_wait_t*, zx_status_t, zx_packet_signal_t const*) ../../sdk/lib/async/include/lib/async/cpp/wait.h:201 <libdriver_runtime.so>+0xfeb9e #36 0x00002290f99bf509 in async_loop_dispatch_wait(async_loop_t*, async_wait_t*, zx_status_t, zx_packet_signal_t const*) ../../sdk/lib/async-loop/loop.c:394 <libdriver_runtime.so>+0x1a5509 #37 0x00002290f99b9958 in async_loop_run_once(async_loop_t*, zx_time_t) ../../sdk/lib/async-loop/loop.c:343 <libdriver_runtime.so>+0x19f958 #38 0x00002290f99b9247 in async_loop_run(async_loop_t*, zx_time_t, _Bool) ../../sdk/lib/async-loop/loop.c:301 <libdriver_runtime.so>+0x19f247 #39 0x00002290f99ba962 in async_loop_run_thread(void*) ../../sdk/lib/async-loop/loop.c:860 <libdriver_runtime.so>+0x1a0962 #40 0x000041afd176ef30 in start_c11(void*) ../../zircon/third_party/ulib/musl/pthread/pthread_create.c:63 <libc.so>+0x84f30 #41 0x000041afd18a448d in thread_trampoline(uintptr_t, uintptr_t) ../../zircon/system/ulib/runtime/thread.cc:100 <libc.so>+0x1ba48d Link: acpica/acpica@1c28da22 Signed-off-by: Rafael J. Wysocki <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Tamir Duberstein <[email protected]> [ rjw: Pick up the tag from Tamir ] Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Sasha Levin <[email protected]> (cherry picked from commit 7efa7856f460a5e8c63cb891212c6d5f4eafbc46)

Modify ReadMe file

77f21a2

Signed-off-by: huangbibo <[email protected]> Change-Id: Ia5c5f90a0dda31bafbc23ec1c66d196d2e9ba1ab

zccrs merged commit d07a454 into deepin-community:hwe-5.18 Oct 18, 2022

opsiff mentioned this pull request Jun 23, 2025

[WIP] [Deepin-Kernel-SIG] [linux 6.6-y] [Upstream] mm/vmscan: don't try to reclaim hwpoison folio #896

Draft

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Modify ReadMe file #3

Modify ReadMe file #3

Uh oh!

huangbibo commented Sep 26, 2022

Uh oh!

shiptux commented Oct 8, 2022

Uh oh!

Uh oh!

Modify ReadMe file #3

Modify ReadMe file #3

Uh oh!

Conversation

huangbibo commented Sep 26, 2022

Uh oh!

shiptux commented Oct 8, 2022

Uh oh!

Uh oh!