[pull] main from github:main #1
Conversation
![pull[bot]](https://avatars.githubusercontent.com/in/12910?s=60&v=4){kind=small}
WalkthroughThis pull request implements extensive refactoring and enhancements across the entire CodeQL Action repository. Multiple GitHub Actions workflows have been updated by removing an obsolete Kotlin-disable flag and introducing a new input parameter ( Changes
Sequence Diagram(s)sequenceDiagram
autonumber
participant U as User
participant GH as GitHub Actions Workflow
participant PT as Prepare Test Step
participant IA as Init Action
participant AN as Analysis Step
participant UA as Upload Artifact Step
participant PS as Post-Step
U->>GH: Push event / PR trigger
GH->>PT: Start "Prepare test" (reads setup-kotlin input)
PT->>IA: Call Init Action with updated parameters (incl. overlay mode)
IA->>AN: Initialize CodeQL, setup environment, run queries
AN->>UA: Analyze code and generate SARIF / debug logs
UA->>PS: Report status and upload artifacts
PS->>GH: End job with consolidated report
Poem
Warning Review ran into problems🔥 ProblemsErrors were encountered while retrieving linked issues. Errors (1)
✨ Finishing Touches
🪧 TipsChatThere are 3 ways to chat with CodeRabbit:
Note: Be mindful of the bot's finite context window. It's strongly recommended to break down tasks such as reading entire modules into smaller chunks. For a focused discussion, use review comments to chat about specific files and their changes, instead of using the PR comments. CodeRabbit Commands (Invoked using PR comments)
Other keywords and placeholders
CodeRabbit Configuration File (
|
![coderabbitai[bot]](https://avatars.githubusercontent.com/in/347564?s=60&v=4){kind=small}
There was a problem hiding this comment.
Actionable comments posted: 7
Outside diff range, codebase verification and nitpick comments (18)
.github/workflows/__all-platform-bundle.yml (1)
57-57: Kotlin Setup May Be Incomplete in WorkflowThe
setup-kotlin: 'true'line is present, but Kotlin is missing from thelanguageslist in the workflow configuration. This could indicate that Kotlin is not fully integrated into the workflow, potentially leading to incomplete setup or execution issues.
- File:
.github/workflows/__all-platform-bundle.yml- Lines: Around
setup-kotlin: 'true'Please ensure that Kotlin is included in all relevant configurations and dependencies within the workflow.
Analysis chain
Enable Kotlin setup.
The addition of
setup-kotlin: 'true'indicates that Kotlin is now explicitly supported. Ensure that any dependencies or configurations required for Kotlin are properly handled in the workflow.Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify Kotlin setup dependencies and configurations. # Test: Search for Kotlin-related setup or configuration files. Expect: Presence of Kotlin setup or configuration. rg --type yaml 'kotlin'Length of output: 247
Script:
#!/bin/bash # Description: Check for Kotlin-related configurations in the workflow file. # Test: Search for Kotlin-related configurations in the specified workflow file. rg 'kotlin' .github/workflows/__all-platform-bundle.yml -A 5Length of output: 302
.github/workflows/__go-indirect-tracing-workaround-no-file-program.yml (1)
57-57: Kotlin setup appears unnecessary in this workflow.The
setup-kotlin: 'true'parameter is the only Kotlin-related configuration in the workflow file, which primarily deals with Go projects. There are no other Kotlin-related actions or dependencies present, suggesting that this setup might not be required. Please review the necessity of this configuration.
.github/workflows/__go-indirect-tracing-workaround-no-file-program.yml: Line withsetup-kotlin: 'true'Analysis chain
Ensure Kotlin setup is necessary.
The
setup-kotlin: 'true'parameter has been added. Verify that Kotlin setup is required for this workflow, as it primarily deals with Go projects.Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify if Kotlin setup is necessary in the Go workflow. # Test: Search for Kotlin-related usage in the Go workflow. Expect: No Kotlin-related actions. rg --type yaml -A 5 'setup-kotlin: true' .github/workflows/__go-indirect-tracing-workaround-no-file-program.ymlLength of output: 113
Script:
#!/bin/bash # Description: Search for any Kotlin-related keywords or actions in the workflow file. # Search for Kotlin-related keywords in the workflow file. rg --type yaml 'kotlin|setup-kotlin' .github/workflows/__go-indirect-tracing-workaround-no-file-program.ymlLength of output: 140
eslint.config.mjs (1)
1-2: Consider removing the auto-generated comment.The comment indicating that the file was auto-generated might not be necessary in a version-controlled environment.
- // Automatically generated by running npx @eslint/migrate-config .eslintrc.jsonlib/start-proxy-action.js (3)
19-19: Consider using optional chaining.The code could be simplified by using optional chaining, which is a more modern and concise way to handle optional properties.
- if (mod && mod.__esModule) return mod; + if (mod?.__esModule) return mod;Tools
Biome
[error] 19-19: Change to an optional chain.
Unsafe fix: Change to an optional chain.
(lint/complexity/useOptionalChain)
65-66: Clarify the comment on retention days.The comment about retention days is informative but could be more explicit about the reason for setting it to 7 days.
- // ensure we don't keep the debug artifacts around for too long since they can be large. + // Set retention to 7 days to prevent large debug artifacts from being stored for too long.
128-129: Improve the comment on port selection.The comment about selecting a different port could be more descriptive about the range and the reason for the random selection.
- // If the proxy failed to start, try a different port from the ephemeral range [49152, 65535] + // If the proxy fails to start, select a random port from the ephemeral range [49152, 65535] to avoid conflicts.lib/debug-artifacts.js (1)
69-71: Log the error object for better debugging.While the warning message is useful, logging the error object can provide more context for debugging purposes.
- core.warning(`Failed to upload debug artifacts: ${e}`); + core.warning(`Failed to upload debug artifacts: ${e.message}`);lib/setup-codeql.js (1)
29-36: Review the removal of exports carefully.The functions
getCodeQLActionRepository,tryGetBundleVersionFromUrl,convertToSemVer,getCodeQLSource,tryGetFallbackToolcacheVersion,getCodeQLURLVersion, andsetupCodeQLBundleare still being used in other parts of the codebase, including source and test files. Ensure that their removal from exports does not break functionality or refactor them appropriately to maintain accessibility.
src/codeql.tssrc/setup-codeql.test.tslib/codeql.jsAnalysis chain
Review the removal of exports.
Several functions have been removed from exports, which may affect their accessibility in other modules. Ensure these functions are not required elsewhere or have been refactored appropriately.
Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify if removed exports are used elsewhere in the codebase. # Test: Search for usage of removed functions. Expect: No occurrences. rg --type javascript -w $'getCodeQLActionRepository|tryGetBundleVersionFromUrl|convertToSemVer|getCodeQLSource|tryGetFallbackToolcacheVersion|getCodeQLURLVersion|setupCodeQLBundle'Length of output: 216
Script:
#!/bin/bash # Description: Verify if removed exports are used elsewhere in the codebase. # Test: Search for usage of removed functions. Expect: No occurrences. rg -w 'getCodeQLActionRepository|tryGetBundleVersionFromUrl|convertToSemVer|getCodeQLSource|tryGetFallbackToolcacheVersion|getCodeQLURLVersion|setupCodeQLBundle'Length of output: 7733
CHANGELOG.md (10)
11-13: Consider using an en dash for date ranges.For consistency and readability, consider using an en dash (–) instead of a hyphen (-) for date ranges.
- ## 3.26.0 - 06 Aug 2024 + ## 3.26.0 – 06 Aug 2024Tools
LanguageTool
[typographical] ~11-~11: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...SED] No user facing changes. ## 3.26.0 - 06 Aug 2024 - Deprecation: Swift anal...(DASH_RULE)
16-18: Consider using an en dash for date ranges.For consistency and readability, consider using an en dash (–) instead of a hyphen (-) for date ranges.
- ## 3.25.15 - 26 Jul 2024 + ## 3.25.15 – 26 Jul 2024Tools
LanguageTool
[typographical] ~16-~16: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2408) ## 3.25.15 - 26 Jul 2024 - Update default CodeQL bun...(DASH_RULE)
20-22: Consider using an en dash for date ranges.For consistency and readability, consider using an en dash (–) instead of a hyphen (-) for date ranges.
- ## 3.25.14 - 25 Jul 2024 + ## 3.25.14 – 25 Jul 2024Tools
LanguageTool
[typographical] ~20-~20: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2385) ## 3.25.14 - 25 Jul 2024 - Experimental: add a new `...(DASH_RULE)
24-26: Consider using an en dash for date ranges.For consistency and readability, consider using an en dash (–) instead of a hyphen (-) for date ranges.
- ## 3.25.13 - 19 Jul 2024 + ## 3.25.13 – 19 Jul 2024Tools
LanguageTool
[typographical] ~24-~24: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2376) ## 3.25.13 - 19 Jul 2024 - Addcodeql-versionto o...(DASH_RULE)
31-33: Consider using an en dash for date ranges.For consistency and readability, consider using an en dash (–) instead of a hyphen (-) for date ranges.
- ## 3.25.12 - 12 Jul 2024 + ## 3.25.12 – 12 Jul 2024Tools
LanguageTool
[typographical] ~31-~31: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...ersion of the CodeQL Action. ## 3.25.12 - 12 Jul 2024 - Improve the reliability a...(DASH_RULE)
36-38: Consider using an en dash for date ranges.For consistency and readability, consider using an en dash (–) instead of a hyphen (-) for date ranges.
- ## 3.25.11 - 28 Jun 2024 + ## 3.25.11 – 28 Jun 2024Tools
LanguageTool
[typographical] ~36-~36: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2364) ## 3.25.11 - 28 Jun 2024 - Avoid failing the workflo...(DASH_RULE)
41-43: Consider using an en dash for date ranges.For consistency and readability, consider using an en dash (–) instead of a hyphen (-) for date ranges.
- ## 3.25.10 - 13 Jun 2024 + ## 3.25.10 – 13 Jun 2024Tools
LanguageTool
[typographical] ~41-~41: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2352) ## 3.25.10 - 13 Jun 2024 - Update default CodeQL bun...(DASH_RULE)
45-47: Consider using an en dash for date ranges.For consistency and readability, consider using an en dash (–) instead of a hyphen (-) for date ranges.
- ## 3.25.9 - 12 Jun 2024 + ## 3.25.9 – 12 Jun 2024Tools
LanguageTool
[typographical] ~45-~45: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2327) ## 3.25.9 - 12 Jun 2024 - Avoid failing database cr...(DASH_RULE)
50-52: Consider using an en dash for date ranges.For consistency and readability, consider using an en dash (–) instead of a hyphen (-) for date ranges.
- ## 3.25.8 - 04 Jun 2024 + ## 3.25.8 – 04 Jun 2024Tools
LanguageTool
[typographical] ~50-~50: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2332) ## 3.25.8 - 04 Jun 2024 - Update default CodeQL bun...(DASH_RULE)
54-56: Consider using an en dash for date ranges.For consistency and readability, consider using an en dash (–) instead of a hyphen (-) for date ranges.
- ## 3.25.7 - 31 May 2024 + ## 3.25.7 – 31 May 2024Tools
LanguageTool
[typographical] ~54-~54: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2321) ## 3.25.7 - 31 May 2024 - We are rolling out a feat...(DASH_RULE)
Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Files ignored due to path filters (186)
lib/actions-util.js.mapis excluded by!**/*.maplib/analyze-action-env.test.js.mapis excluded by!**/*.maplib/analyze-action-input.test.js.mapis excluded by!**/*.maplib/analyze-action-post-helper.js.mapis excluded by!**/*.maplib/analyze-action.js.mapis excluded by!**/*.maplib/analyze.js.mapis excluded by!**/*.maplib/api-client.js.mapis excluded by!**/*.maplib/autobuild-action.js.mapis excluded by!**/*.maplib/autobuild.js.mapis excluded by!**/*.maplib/cli-errors.js.mapis excluded by!**/*.maplib/codeql.js.mapis excluded by!**/*.maplib/codeql.test.js.mapis excluded by!**/*.maplib/config-utils.js.mapis excluded by!**/*.maplib/config-utils.test.js.mapis excluded by!**/*.maplib/database-upload.js.mapis excluded by!**/*.maplib/debug-artifacts.js.mapis excluded by!**/*.maplib/diagnostics.js.mapis excluded by!**/*.maplib/doc-url.js.mapis excluded by!**/*.maplib/feature-flags.js.mapis excluded by!**/*.maplib/feature-flags.test.js.mapis excluded by!**/*.maplib/fingerprints.js.mapis excluded by!**/*.maplib/init-action-post-helper.js.mapis excluded by!**/*.maplib/init-action-post-helper.test.js.mapis excluded by!**/*.maplib/init-action.js.mapis excluded by!**/*.maplib/init.js.mapis excluded by!**/*.maplib/init.test.js.mapis excluded by!**/*.maplib/languages.js.mapis excluded by!**/*.maplib/logging.js.mapis excluded by!**/*.maplib/repository.js.mapis excluded by!**/*.maplib/resolve-environment.js.mapis excluded by!**/*.maplib/setup-codeql.js.mapis excluded by!**/*.maplib/setup-codeql.test.js.mapis excluded by!**/*.maplib/start-proxy-action-post.js.mapis excluded by!**/*.maplib/start-proxy-action.js.mapis excluded by!**/*.maplib/status-report.js.mapis excluded by!**/*.maplib/testing-utils.js.mapis excluded by!**/*.maplib/tools-features.js.mapis excluded by!**/*.maplib/tracer-config.js.mapis excluded by!**/*.maplib/tracer-config.test.js.mapis excluded by!**/*.maplib/trap-caching.js.mapis excluded by!**/*.maplib/upload-lib.js.mapis excluded by!**/*.maplib/upload-sarif-action-post-helper.js.mapis excluded by!**/*.maplib/upload-sarif-action.js.mapis excluded by!**/*.maplib/util.js.mapis excluded by!**/*.maplib/workflow.js.mapis excluded by!**/*.maplib/workflow.test.js.mapis excluded by!**/*.mapnode_modules/@eslint/compat/LICENSEis excluded by!**/node_modules/**node_modules/@eslint/compat/README.mdis excluded by!**/node_modules/**node_modules/@eslint/compat/dist/cjs/index.cjsis excluded by!**/dist/**,!**/node_modules/**node_modules/@eslint/compat/dist/cjs/index.d.ctsis excluded by!**/dist/**,!**/node_modules/**node_modules/@eslint/compat/dist/esm/index.d.tsis excluded by!**/dist/**,!**/node_modules/**node_modules/@eslint/compat/dist/esm/index.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@eslint/compat/package.jsonis excluded by!**/node_modules/**node_modules/@eslint/eslintrc/README.mdis excluded by!**/node_modules/**node_modules/@eslint/eslintrc/dist/eslintrc-universal.cjsis excluded by!**/dist/**,!**/node_modules/**node_modules/@eslint/eslintrc/dist/eslintrc-universal.cjs.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@eslint/eslintrc/dist/eslintrc.cjsis excluded by!**/dist/**,!**/node_modules/**node_modules/@eslint/eslintrc/dist/eslintrc.cjs.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@eslint/eslintrc/lib/config-array-factory.jsis excluded by!**/node_modules/**node_modules/@eslint/eslintrc/lib/config-array/config-array.jsis excluded by!**/node_modules/**node_modules/@eslint/eslintrc/lib/index.jsis excluded by!**/node_modules/**node_modules/@eslint/eslintrc/lib/shared/config-validator.jsis excluded by!**/node_modules/**node_modules/@eslint/eslintrc/node_modules/eslint-visitor-keys/LICENSEis excluded by!**/node_modules/**node_modules/@eslint/eslintrc/node_modules/eslint-visitor-keys/README.mdis excluded by!**/node_modules/**node_modules/@eslint/eslintrc/node_modules/eslint-visitor-keys/dist/eslint-visitor-keys.cjsis excluded by!**/dist/**,!**/node_modules/**node_modules/@eslint/eslintrc/node_modules/eslint-visitor-keys/dist/eslint-visitor-keys.d.ctsis excluded by!**/dist/**,!**/node_modules/**node_modules/@eslint/eslintrc/node_modules/eslint-visitor-keys/dist/index.d.tsis excluded by!**/dist/**,!**/node_modules/**node_modules/@eslint/eslintrc/node_modules/eslint-visitor-keys/dist/visitor-keys.d.tsis excluded by!**/dist/**,!**/node_modules/**node_modules/@eslint/eslintrc/node_modules/eslint-visitor-keys/lib/index.jsis excluded by!**/node_modules/**node_modules/@eslint/eslintrc/node_modules/eslint-visitor-keys/lib/visitor-keys.jsis excluded by!**/node_modules/**node_modules/@eslint/eslintrc/node_modules/eslint-visitor-keys/package.jsonis excluded by!**/node_modules/**node_modules/@eslint/eslintrc/node_modules/espree/LICENSEis excluded by!**/node_modules/**node_modules/@eslint/eslintrc/node_modules/espree/README.mdis excluded by!**/node_modules/**node_modules/@eslint/eslintrc/node_modules/espree/dist/espree.cjsis excluded by!**/dist/**,!**/node_modules/**node_modules/@eslint/eslintrc/node_modules/espree/espree.jsis excluded by!**/node_modules/**node_modules/@eslint/eslintrc/node_modules/espree/lib/espree.jsis excluded by!**/node_modules/**node_modules/@eslint/eslintrc/node_modules/espree/lib/features.jsis excluded by!**/node_modules/**node_modules/@eslint/eslintrc/node_modules/espree/lib/options.jsis excluded by!**/node_modules/**node_modules/@eslint/eslintrc/node_modules/espree/lib/token-translator.jsis excluded by!**/node_modules/**node_modules/@eslint/eslintrc/node_modules/espree/lib/version.jsis excluded by!**/node_modules/**node_modules/@eslint/eslintrc/node_modules/espree/package.jsonis excluded by!**/node_modules/**node_modules/@eslint/eslintrc/node_modules/globals/globals.jsonis excluded by!**/node_modules/**node_modules/@eslint/eslintrc/node_modules/globals/index.d.tsis excluded by!**/node_modules/**node_modules/@eslint/eslintrc/node_modules/globals/index.jsis excluded by!**/node_modules/**node_modules/@eslint/eslintrc/node_modules/globals/licenseis excluded by!**/node_modules/**node_modules/@eslint/eslintrc/node_modules/globals/package.jsonis excluded by!**/node_modules/**node_modules/@eslint/eslintrc/node_modules/globals/readme.mdis excluded by!**/node_modules/**node_modules/@eslint/eslintrc/package.jsonis excluded by!**/node_modules/**node_modules/@eslint/js/package.jsonis excluded by!**/node_modules/**node_modules/@eslint/js/src/configs/eslint-all.jsis excluded by!**/node_modules/**node_modules/@eslint/js/src/configs/eslint-recommended.jsis excluded by!**/node_modules/**node_modules/@types/console-log-level/LICENSEis excluded by!**/node_modules/**node_modules/@types/console-log-level/README.mdis excluded by!**/node_modules/**node_modules/@types/console-log-level/index.d.tsis excluded by!**/node_modules/**node_modules/@types/console-log-level/package.jsonis excluded by!**/node_modules/**node_modules/@types/node-forge/LICENSEis excluded by!**/node_modules/**node_modules/@types/node-forge/README.mdis excluded by!**/node_modules/**node_modules/@types/node-forge/index.d.tsis excluded by!**/node_modules/**node_modules/@types/node-forge/package.jsonis excluded by!**/node_modules/**node_modules/@types/uuid/README.mdis excluded by!**/node_modules/**node_modules/@types/uuid/index.d.mtsis excluded by!**/node_modules/**node_modules/@types/uuid/index.d.tsis excluded by!**/node_modules/**node_modules/@types/uuid/package.jsonis excluded by!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/configs/all.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/configs/all.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/configs/disable-type-checked.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/configs/disable-type-checked.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/configs/recommended-type-checked-only.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/configs/recommended-type-checked-only.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/configs/recommended-type-checked.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/configs/recommended-type-checked.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/configs/recommended.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/configs/recommended.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/configs/strict-type-checked-only.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/configs/strict-type-checked-only.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/configs/strict-type-checked.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/configs/strict-type-checked.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/configs/strict.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/configs/strict.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/configs/stylistic-type-checked-only.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/configs/stylistic-type-checked-only.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/configs/stylistic-type-checked.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/configs/stylistic-type-checked.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/configs/stylistic.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/configs/stylistic.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/rules/adjacent-overload-signatures.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/adjacent-overload-signatures.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/rules/array-type.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/array-type.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/rules/class-literal-property-style.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/class-literal-property-style.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/rules/class-methods-use-this.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/rules/consistent-type-assertions.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/consistent-type-assertions.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/rules/consistent-type-definitions.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/consistent-type-definitions.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/rules/consistent-type-imports.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/consistent-type-imports.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/rules/default-param-last.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/default-param-last.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/rules/dot-notation.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/dot-notation.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/rules/enum-utils/shared.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/enum-utils/shared.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/rules/explicit-member-accessibility.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/explicit-member-accessibility.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/rules/indent.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/rules/index.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/index.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/rules/init-declarations.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/init-declarations.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/rules/member-ordering.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/member-ordering.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/rules/method-signature-style.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/method-signature-style.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/rules/naming-convention-utils/parse-options.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/naming-convention-utils/parse-options.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/rules/naming-convention-utils/schema.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/naming-convention-utils/schema.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/rules/naming-convention-utils/shared.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/naming-convention-utils/shared.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/rules/naming-convention-utils/validator.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/naming-convention-utils/validator.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/rules/naming-convention.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/naming-convention.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/rules/no-array-delete.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/no-array-delete.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/rules/no-base-to-string.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/no-base-to-string.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/rules/no-duplicate-enum-values.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/no-duplicate-enum-values.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/rules/no-duplicate-type-constituents.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/no-duplicate-type-constituents.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/rules/no-dynamic-delete.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/no-dynamic-delete.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/rules/no-empty-interface.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/no-empty-interface.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/rules/no-empty-object-type.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/no-empty-object-type.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/rules/no-extraneous-class.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/no-extraneous-class.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/rules/no-floating-promises.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/no-floating-promises.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/rules/no-implied-eval.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/no-implied-eval.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/rules/no-inferrable-types.jsis excluded by!**/dist/**,!**/node_modules/**
Files selected for processing (106)
- .github/actions/prepare-test/action.yml (2 hunks)
- .github/actions/query-filter-test/action.yml (1 hunks)
- .github/workflows/__all-platform-bundle.yml (3 hunks)
- .github/workflows/__analyze-ref-input.yml (4 hunks)
- .github/workflows/__autobuild-action.yml (5 hunks)
- .github/workflows/__autobuild-direct-tracing-with-working-dir.yml (1 hunks)
- .github/workflows/__autobuild-direct-tracing.yml (4 hunks)
- .github/workflows/__build-mode-autobuild.yml (3 hunks)
- .github/workflows/__build-mode-manual.yml (4 hunks)
- .github/workflows/__build-mode-none.yml (4 hunks)
- .github/workflows/__build-mode-rollback.yml (3 hunks)
- .github/workflows/__cleanup-db-cluster-dir.yml (1 hunks)
- .github/workflows/__config-export.yml (4 hunks)
- .github/workflows/__config-input.yml (4 hunks)
- .github/workflows/__cpp-deptrace-disabled.yml (4 hunks)
- .github/workflows/__cpp-deptrace-enabled-on-macos.yml (3 hunks)
- .github/workflows/__cpp-deptrace-enabled.yml (4 hunks)
- .github/workflows/__diagnostics-export.yml (6 hunks)
- .github/workflows/__export-file-baseline-information.yml (4 hunks)
- .github/workflows/__extractor-ram-threads.yml (4 hunks)
- .github/workflows/__go-custom-queries.yml (6 hunks)
- .github/workflows/__go-indirect-tracing-workaround-diagnostic.yml (3 hunks)
- .github/workflows/__go-indirect-tracing-workaround-no-file-program.yml (3 hunks)
- .github/workflows/__go-indirect-tracing-workaround.yml (4 hunks)
- .github/workflows/__go-tracing-autobuilder.yml (6 hunks)
- .github/workflows/__go-tracing-custom-build-steps.yml (6 hunks)
- .github/workflows/__go-tracing-legacy-workflow.yml (6 hunks)
- .github/workflows/__init-with-registries.yml (4 hunks)
- .github/workflows/__javascript-source-root.yml (5 hunks)
- .github/workflows/__language-aliases.yml (4 hunks)
- .github/workflows/__multi-language-autodetect.yml (6 hunks)
- .github/workflows/__packaging-codescanning-config-inputs-js.yml (4 hunks)
- .github/workflows/__packaging-config-inputs-js.yml (4 hunks)
- .github/workflows/__packaging-config-js.yml (4 hunks)
- .github/workflows/__packaging-inputs-js.yml (4 hunks)
- .github/workflows/__remote-config.yml (5 hunks)
- .github/workflows/__resolve-environment-action.yml (5 hunks)
- .github/workflows/__rubocop-multi-language.yml (3 hunks)
- .github/workflows/__ruby.yml (4 hunks)
- .github/workflows/__split-workflow.yml (4 hunks)
- .github/workflows/__submit-sarif-failure.yml (4 hunks)
- .github/workflows/__swift-autobuild.yml (4 hunks)
- .github/workflows/__swift-custom-build.yml (4 hunks)
- .github/workflows/__test-autobuild-working-dir.yml (5 hunks)
- .github/workflows/__test-local-codeql.yml (4 hunks)
- .github/workflows/__test-proxy.yml (4 hunks)
- .github/workflows/__unset-environment.yml (4 hunks)
- .github/workflows/__upload-ref-sha-input.yml (4 hunks)
- .github/workflows/__with-checkout-path.yml (5 hunks)
- .github/workflows/codeql.yml (4 hunks)
- .github/workflows/codescanning-config-cli.yml (1 hunks)
- .github/workflows/debug-artifacts-failure.yml (2 hunks)
- .github/workflows/debug-artifacts.yml (4 hunks)
- .github/workflows/expected-queries-runs.yml (1 hunks)
- .github/workflows/pr-checks.yml (5 hunks)
- .github/workflows/python312-windows.yml (2 hunks)
- .github/workflows/query-filters.yml (1 hunks)
- .github/workflows/script/update-node-modules.sh (1 hunks)
- .github/workflows/script/update-required-checks.sh (1 hunks)
- .github/workflows/test-codeql-bundle-all.yml (2 hunks)
- CHANGELOG.md (1 hunks)
- README.md (1 hunks)
- eslint.config.mjs (1 hunks)
- init/action.yml (1 hunks)
- lib/actions-util.js (16 hunks)
- lib/analyze-action-env.test.js (1 hunks)
- lib/analyze-action-input.test.js (1 hunks)
- lib/analyze-action-post-helper.js (2 hunks)
- lib/analyze-action.js (5 hunks)
- lib/analyze.js (9 hunks)
- lib/api-client.js (11 hunks)
- lib/api-compatibility.json (1 hunks)
- lib/autobuild-action.js (3 hunks)
- lib/autobuild.js (5 hunks)
- lib/cli-errors.js (9 hunks)
- lib/codeql.js (27 hunks)
- lib/codeql.test.js (20 hunks)
- lib/config-utils.js (18 hunks)
- lib/config-utils.test.js (1 hunks)
- lib/database-upload.js (3 hunks)
- lib/debug-artifacts.js (6 hunks)
- lib/defaults.json (1 hunks)
- lib/diagnostics.js (7 hunks)
- lib/doc-url.js (1 hunks)
- lib/feature-flags.js (4 hunks)
- lib/feature-flags.test.js (3 hunks)
- lib/fingerprints.js (5 hunks)
- lib/init-action-post-helper.js (5 hunks)
- lib/init-action-post-helper.test.js (2 hunks)
- lib/init-action.js (12 hunks)
- lib/init.js (5 hunks)
- lib/init.test.js (2 hunks)
- lib/languages.js (3 hunks)
- lib/logging.js (1 hunks)
- lib/repository.js (2 hunks)
- lib/resolve-environment.js (2 hunks)
- lib/setup-codeql.js (13 hunks)
- lib/setup-codeql.test.js (2 hunks)
- lib/start-proxy-action-post.js (1 hunks)
- lib/start-proxy-action.js (1 hunks)
- lib/status-report.js (8 hunks)
- lib/testing-utils.js (8 hunks)
- lib/tools-features.js (3 hunks)
- lib/tracer-config.js (4 hunks)
- lib/tracer-config.test.js (3 hunks)
- lib/trap-caching.js (5 hunks)
Files not processed due to max files limit (6)
- lib/upload-lib.js
- lib/upload-sarif-action-post-helper.js
- lib/upload-sarif-action.js
- lib/util.js
- lib/workflow.js
- lib/workflow.test.js
Files skipped from review due to trivial changes (13)
- .github/actions/query-filter-test/action.yml
- .github/workflows/__autobuild-direct-tracing-with-working-dir.yml
- .github/workflows/__cleanup-db-cluster-dir.yml
- README.md
- lib/analyze-action-env.test.js
- lib/analyze-action-input.test.js
- lib/autobuild-action.js
- lib/defaults.json
- lib/feature-flags.test.js
- lib/languages.js
- lib/repository.js
- lib/testing-utils.js
- lib/trap-caching.js
Additional context used
Biome
lib/doc-url.js
[error] 1-1: Redundant use strict directive.
The entire contents of JavaScript modules are automatically in strict mode, with no statement needed to initiate it.
Safe fix: Remove the redundant use strict directive.(lint/suspicious/noRedundantUseStrict)
[error] 15-15: The assignment should not be in an expression.
The use of assignments in expressions is confusing.
Expressions are often considered as side-effect free.(lint/suspicious/noAssignInExpressions)
[error] 15-15: The assignment should not be in an expression.
The use of assignments in expressions is confusing.
Expressions are often considered as side-effect free.(lint/suspicious/noAssignInExpressions)
lib/start-proxy-action-post.js
[error] 1-1: Redundant use strict directive.
The entire contents of JavaScript modules are automatically in strict mode, with no statement needed to initiate it.
Safe fix: Remove the redundant use strict directive.(lint/suspicious/noRedundantUseStrict)
[error] 19-19: Change to an optional chain.
Unsafe fix: Change to an optional chain.
(lint/complexity/useOptionalChain)
[error] 47-47: Change to an optional chain.
Unsafe fix: Change to an optional chain.
(lint/complexity/useOptionalChain)
lib/init.test.js
[error] 19-19: Change to an optional chain.
Unsafe fix: Change to an optional chain.
(lint/complexity/useOptionalChain)
[error] 26-26: Change to an optional chain.
Unsafe fix: Change to an optional chain.
(lint/complexity/useOptionalChain)
lib/start-proxy-action.js
[error] 1-1: Redundant use strict directive.
The entire contents of JavaScript modules are automatically in strict mode, with no statement needed to initiate it.
Safe fix: Remove the redundant use strict directive.(lint/suspicious/noRedundantUseStrict)
[error] 19-19: Change to an optional chain.
Unsafe fix: Change to an optional chain.
(lint/complexity/useOptionalChain)
lib/cli-errors.js
[error] 144-144: Use a regular expression literal instead of the RegExp constructor.
Regular expression literals avoid some escaping required in a string literal, and are easier to analyze statically.
Safe fix: Use a literal notation instead.(lint/complexity/useRegexLiterals)
LanguageTool
CHANGELOG.md
[uncategorized] ~9-~9: If this is a compound adjective that modifies the following noun, use a hyphen.
Context: ...h version numbers. ## [UNRELEASED] No user facing changes. ## 3.26.0 - 06 Aug 2024 - _D...(EN_COMPOUND_ADJECTIVE_INTERNAL)
[typographical] ~11-~11: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...SED] No user facing changes. ## 3.26.0 - 06 Aug 2024 - Deprecation: Swift anal...(DASH_RULE)
[typographical] ~16-~16: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2408) ## 3.25.15 - 26 Jul 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~20-~20: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2385) ## 3.25.14 - 25 Jul 2024 - Experimental: add a new `...(DASH_RULE)
[typographical] ~24-~24: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2376) ## 3.25.13 - 19 Jul 2024 - Addcodeql-versionto o...(DASH_RULE)
[typographical] ~31-~31: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...ersion of the CodeQL Action. ## 3.25.12 - 12 Jul 2024 - Improve the reliability a...(DASH_RULE)
[typographical] ~36-~36: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2364) ## 3.25.11 - 28 Jun 2024 - Avoid failing the workflo...(DASH_RULE)
[typographical] ~41-~41: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2352) ## 3.25.10 - 13 Jun 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~45-~45: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2327) ## 3.25.9 - 12 Jun 2024 - Avoid failing database cr...(DASH_RULE)
[typographical] ~50-~50: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2332) ## 3.25.8 - 04 Jun 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~54-~54: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2321) ## 3.25.7 - 31 May 2024 - We are rolling out a feat...(DASH_RULE)
Additional comments not posted (221)
lib/api-compatibility.json (1)
1-1: Verify impact on users due to version changes.The changes in
maximumVersionandminimumVersionupdate the supported API versions. Ensure that users relying on older versions are informed about the need to upgrade to maintain compatibility..github/workflows/script/update-node-modules.sh (1)
1-2: LGTM! Verify npm cache cleaning permissions.The addition of
#!/bin/bashandset -euimproves script robustness. The changes are approved.Ensure that the user has the necessary permissions to run
sudo npm cache clean --force..github/workflows/python312-windows.yml (2)
37-37: Verify impact of changing tools to linked.The change from
tools: latesttotools: linkedmay affect the version of tools used. Verify its impact on the workflow.Verification successful
No functional impact from changing
tools: latesttotools: linked.The change is a renaming to clarify that
tools: linkedspecifies using tools shipped with the Action. The old name remains supported for backward compatibility, indicating no immediate impact on the workflow.
- Refer to
CHANGELOG.mdfor more details.Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify the impact of changing tools to linked. # Test: Search for documentation or code comments related to tools: linked. Expect: Explanation of the change and its impact. rg "tools: linked" -A 5Length of output: 2385
17-18: Verify implications of CODEQL_ACTION_TEST_MODE.The addition of
CODEQL_ACTION_TEST_MODE: truesuggests a new testing mode. Verify its impact on the workflow and testing process.Verification successful
Implications of CODEQL_ACTION_TEST_MODE in the Workflow
The
CODEQL_ACTION_TEST_MODEenvironment variable is used to toggle a testing mode for CodeQL actions. It is referenced in several parts of the codebase, indicating its role in modifying the behavior of workflows for testing purposes. This mode might affect how workflows execute, potentially enabling additional logging or altering execution paths.
- Files Involved:
src/environment.tsandlib/environment.jsdefine it as a test mode variable.pr-checks/sync.pychecks and sets this variable if not already present.pr-checks/checks/submit-sarif-failure.ymlsets it to false, indicating different configurations for different workflows.Consider reviewing these references to ensure the testing mode's behavior aligns with your expectations for the workflow.
Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify the implications of CODEQL_ACTION_TEST_MODE on the workflow. # Test: Search for references to CODEQL_ACTION_TEST_MODE in the codebase. Expect: Documentation or code comments explaining its purpose. rg "CODEQL_ACTION_TEST_MODE" -A 5Length of output: 1691
.github/workflows/expected-queries-runs.yml (1)
32-32: Switch to a specific version for stability.The
versionparameter has been changed fromlatesttolinked. This change can help ensure consistency and avoid unexpected issues due to updates in the latest version..github/workflows/test-codeql-bundle-all.yml (1)
45-46: Exclude unsupported languages for efficiency.Swift has been excluded from the language list as it is not supported on Ubuntu. This change optimizes the workflow by focusing only on compatible languages.
lib/tools-features.js (1)
14-14: Expand feature set withForceOverwrite.The addition of
ForceOverwriteto theToolsFeatureenum extends the feature set, allowing for more granular control over tool behaviors.lib/logging.js (2)
26-27: LGTM! The export changes improve clarity.The direct assignment of exports enhances readability and consistency.
34-40: Enhanced logging functionality is beneficial.The added methods (
info,warning,error) ingetRunnerLoggerprovide a more comprehensive logging interface..github/workflows/__test-proxy.yml (1)
31-31: Workflow configuration changes look good.The shift to
version: linkedand the addition ofsetup-kotlin: 'false'streamline the workflow configuration.Also applies to: 57-57
.github/workflows/__all-platform-bundle.yml (1)
61-62: Update supported languages list.The languages list now explicitly excludes Swift on Ubuntu. This change should align with the environments and languages supported by your project.
.github/workflows/query-filters.yml (1)
30-30: Change version parameter tolinked.The version parameter change from
latesttolinkedsuggests a preference for a specific version. Verify that this change aligns with the intended stability or compatibility goals.lib/analyze-action-post-helper.js (1)
26-26: Ensure proper export of therunfunction.The change to
exports.run = run;correctly exports therunfunction, making it accessible to other modules. This resolves any previous issues with the function not being properly exported..github/workflows/__test-local-codeql.yml (3)
57-57: Kotlin setup enabled.The
setup-kotlinparameter is now set to'true', indicating explicit support for Kotlin. Ensure that this aligns with other configurations.
67-68: Swift exclusion from Ubuntu supported languages.Swift has been excluded from the list of supported languages on Ubuntu, which aligns with the note that Swift is not supported on this platform.
Line range hint
1-75:
Verify impact of removingCODEQL_EXTRACTOR_JAVA_AGENT_DISABLE_KOTLIN.The removal of this environment variable indicates a change in how Kotlin is handled. Ensure that this does not negatively impact the CodeQL analysis for Kotlin.
Verification successful
Kotlin Analysis Configuration Verified
The removal of
CODEQL_EXTRACTOR_JAVA_AGENT_DISABLE_KOTLINdoes not negatively impact Kotlin analysis. The codebase includes several references to Kotlin, indicating that it is still supported through language aliases and other configurations.
- References to Kotlin are found in workflow and configuration files, such as
language-aliases.ymland other setup scripts.Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify the impact of removing `CODEQL_EXTRACTOR_JAVA_AGENT_DISABLE_KOTLIN`. # Test: Check if Kotlin extraction is still functioning as expected. # Expect: No errors related to Kotlin extraction in CodeQL workflows. rg --type yaml 'CODEQL_EXTRACTOR_JAVA_AGENT_DISABLE_KOTLIN'Length of output: 59
Script:
#!/bin/bash # Description: Check for references to Kotlin in workflow files and related configurations. # Search for any mention of Kotlin in YAML workflow files. rg --type yaml 'kotlin' # Search for any mention of Kotlin in the pr-checks directory or related setup scripts. fd --type f --exec rg 'kotlin' {}Length of output: 2657
.github/workflows/__language-aliases.yml (3)
57-57: Kotlin setup enabled.The
setup-kotlinparameter is now set to'true', indicating explicit support for Kotlin. Ensure that this aligns with other configurations.
Line range hint
1-73:
Verify impact of removingCODEQL_EXTRACTOR_JAVA_AGENT_DISABLE_KOTLIN.The removal of this environment variable indicates a change in how Kotlin is handled. Ensure that this does not negatively impact the CodeQL analysis for Kotlin.
31-31: Verify impact of changingversiontolinked.The
versionparameter has been changed fromlatesttolinked. Ensure that this change aligns with the intended version control strategy and does not affect compatibility.Verification successful
Change to
version: linkedappears isolated.The change to
version: linkedin the.github/workflows/__language-aliases.ymlfile does not appear to impact other parts of the codebase, as no other references to this specific setting were found. Ensure this aligns with the intended configuration for this workflow.Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify the impact of changing `version` to `linked`. # Test: Check for references to the `version` parameter. # Expect: Consistent usage of `linked` version in relevant workflows. rg --type yaml 'version: linked'Length of output: 34
Script:
#!/bin/bash # Description: Search for any references to the `version` parameter in YAML files. # Test: Broaden the search to include all `version` references. rg --type yaml 'version:'Length of output: 2852
.github/workflows/script/update-required-checks.sh (1)
31-31: Refined filtering logic for check runs.The filtering logic now excludes check runs with a conclusion of "skipped", ensuring only relevant and completed checks are considered. This change aligns with the intended behavior.
.github/workflows/__analyze-ref-input.yml (1)
61-61: Enable Kotlin setup explicitly.The addition of
setup-kotlin: 'true'ensures that Kotlin is explicitly supported in the workflow setup. This change aligns with the removal ofCODEQL_EXTRACTOR_JAVA_AGENT_DISABLE_KOTLIN, indicating a shift towards better Kotlin handling..github/workflows/__rubocop-multi-language.yml (1)
57-57: Enable Kotlin setup explicitly.The addition of
setup-kotlin: 'true'ensures that Kotlin is explicitly supported in the workflow setup. This change aligns with the removal ofCODEQL_EXTRACTOR_JAVA_AGENT_DISABLE_KOTLIN, indicating a shift towards better Kotlin handling..github/workflows/__build-mode-manual.yml (1)
57-57: Enable Kotlin setup explicitly.The addition of
setup-kotlin: 'true'ensures that Kotlin is explicitly supported in the workflow setup. This change aligns with the removal ofCODEQL_EXTRACTOR_JAVA_AGENT_DISABLE_KOTLIN, indicating a shift towards better Kotlin handling..github/workflows/__javascript-source-root.yml (2)
31-31: Switch tolinkedversion for stability.Changing the version from
latesttolinkedcan enhance stability by using a specific version rather than the most recent one.
61-61: Explicit Kotlin setup enabled.The addition of
setup-kotlin: 'true'ensures that Kotlin is explicitly set up, which may be necessary for the workflow's execution..github/workflows/__ruby.yml (3)
31-31: Switch tolinkedversion for Ubuntu stability.Changing the version from
latesttolinkedfor Ubuntu can enhance stability by using a specific version rather than the most recent one.
33-33: Switch tolinkedversion for macOS stability.Changing the version from
latesttolinkedfor macOS can enhance stability by using a specific version rather than the most recent one.
67-67: Explicit Kotlin setup enabled.The addition of
setup-kotlin: 'true'ensures that Kotlin is explicitly set up, which may be necessary for the workflow's execution..github/workflows/__test-autobuild-working-dir.yml (2)
31-31: Switch tolinkedversion for stability.Changing the version from
latesttolinkedcan enhance stability by using a specific version rather than the most recent one.
57-57: Explicit Kotlin setup enabled.The addition of
setup-kotlin: 'true'ensures that Kotlin is explicitly set up, which may be necessary for the workflow's execution..github/workflows/__cpp-deptrace-enabled.yml (2)
31-31: Use of specific versioning is good practice.Changing the version from
latesttolinkedenhances build consistency and stability.
61-61: Explicit Kotlin setup is beneficial.Adding
setup-kotlin: 'true'ensures that Kotlin is properly configured, which is important for projects using Kotlin..github/workflows/__autobuild-action.yml (2)
31-35: Use of specific versioning is good practice.Changing the version from
latesttolinkedacross multiple OS configurations enhances build consistency and stability.
61-61: Explicit Kotlin setup is beneficial.Adding
setup-kotlin: 'true'ensures that Kotlin is properly configured, which is important for projects using Kotlin..github/workflows/__build-mode-none.yml (2)
31-31: Use of specific versioning is good practice.Changing the version from
latesttolinkedenhances build consistency and stability.
59-59: Explicit Kotlin setup is beneficial.Adding
setup-kotlin: 'true'ensures that Kotlin is properly configured, which is important for projects using Kotlin..github/workflows/__cpp-deptrace-enabled-on-macos.yml (1)
57-57: Ensure Kotlin setup is necessary.The addition of
setup-kotlin: 'true'suggests that Kotlin support is now required. Verify that this change aligns with the project's requirements and does not introduce unnecessary dependencies.Verification successful
Kotlin Setup Justification
The presence of the Kotlin file
tests/multi-language-repo/main.ktsuggests that the Kotlin setup in the workflow is likely necessary. Ensure that this aligns with the project's requirements and that the Kotlin component is actively utilized in the build or test processes.Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify if Kotlin setup is necessary by checking for Kotlin-related files or configurations. # Test: Search for Kotlin-related files or configurations. Expect: Relevant Kotlin files or configurations. rg --type kotlinLength of output: 415
Script:
#!/bin/bash # Description: Verify if Kotlin setup is necessary by checking for Kotlin-related files or configurations. # Test: Search for Kotlin-related files or configurations. Expect: Relevant Kotlin files or configurations. rg --type kotlin --files-with-matchesLength of output: 436
Script:
#!/bin/bash # Description: Verify if Kotlin setup is necessary by checking for Kotlin-related files or configurations. # Test: Search for Kotlin files by their common file extension. Expect: Relevant Kotlin files. fd --extension ktLength of output: 53
.github/workflows/__build-mode-autobuild.yml (1)
57-57: Verify Kotlin setup requirements.The addition of
setup-kotlin: 'true'indicates that Kotlin support is now explicitly enabled. Ensure that this aligns with the project's requirements and does not introduce unnecessary dependencies.Verification successful
Let's correct the command to search for Kotlin-related files and configurations in the repository.
Kotlin setup is justified.
The presence of the Kotlin file
tests/multi-language-repo/main.ktindicates that enabling Kotlin support in the workflow is necessary and aligns with the project's requirements. No unnecessary dependencies are introduced by this change.
- Kotlin file found:
tests/multi-language-repo/main.ktScripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify if Kotlin setup is necessary by checking for Kotlin-related files or configurations. # Test: Search for Kotlin-related files or configurations. Expect: Relevant Kotlin files or configurations. rg --type kotlinLength of output: 415
Script:
#!/bin/bash # Description: Verify if Kotlin setup is necessary by checking for Kotlin-related files or configurations. # Corrected command to search for Kotlin files rg --files | grep '\.kt$'Length of output: 61
.github/workflows/__cpp-deptrace-disabled.yml (2)
31-31: Review matrix version change.The matrix version has been changed from
latesttolinked. Ensure that this change is intentional and aligns with the desired version stability or specificity.Verification successful
Matrix version change from
latesttolinkedis intentional and documented.The change from
latesttolinkedis consistent with the documentation and configuration updates. TheCHANGELOG.mdindicates thattools: latesthas been renamed totools: linked, and this change is recommended for new workflows.
- Refer to
CHANGELOG.mdfor more details on this update.Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify the impact of changing the matrix version from `latest` to `linked`. # Test: Check for documentation or configuration files that specify the `linked` version. Expect: Relevant documentation or configurations. rg 'linked'Length of output: 299908
61-61: Confirm Kotlin setup necessity.The addition of
setup-kotlin: 'true'suggests that Kotlin support is now required. Verify that this change aligns with the project's requirements and does not introduce unnecessary dependencies.Verification successful
Kotlin setup is justified.
The presence of Kotlin files and references in configuration files confirms that Kotlin support is necessary for this project. The addition of
setup-kotlin: 'true'aligns with the project's requirements.
- Kotlin file found:
tests/multi-language-repo/main.kt- References in configuration files:
pr-checks/checks/language-aliases.ymlpr-checks/checks/export-file-baseline-information.ymlScripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify if Kotlin setup is necessary by checking for Kotlin-related files or configurations. # Test: Search for Kotlin-related files or configurations. Expect: Relevant Kotlin files or configurations. rg --type kotlinLength of output: 415
Script:
#!/bin/bash # Description: Verify if Kotlin setup is necessary by checking for Kotlin-related files or configurations. # Search for Kotlin files by extension fd --extension kt # Search for Kotlin-related keywords in configuration files rg 'kotlin' --glob '*.gradle' --glob '*.kts' --glob '*.yaml' --glob '*.yml'Length of output: 353
.github/workflows/__extractor-ram-threads.yml (2)
31-31: Update version tolinked.Changing the version from
latesttolinkedsuggests a move towards more stable and predictable builds. Ensure that thelinkedversion is correctly configured and maintained.Verification successful
Presence of
version: linkedconfirmed.The
version: linkedis present in the.github/workflows/__extractor-ram-threads.ymlfile as expected. Please ensure that this version is correctly configured and maintained for stability and predictability in builds.Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify the usage of `linked` version in the workflow templates. # Test: Check if `linked` version is used consistently across workflow templates. rg --type yaml 'version: linked'Length of output: 34
Script:
#!/bin/bash # Description: Verify the specific usage of `version: linked` in the given workflow file. # Test: Check if `version: linked` is present in the specified workflow file. rg 'version: linked' .github/workflows/__extractor-ram-threads.ymlLength of output: 96
57-57: Enable Kotlin setup.The addition of
setup-kotlin: 'true'indicates Kotlin setup is now required. Verify that this change aligns with the intended support for Kotlin in the workflow.Verification successful
Kotlin setup is consistently integrated across workflows.
The addition of
setup-kotlin: 'true'in the.github/workflows/__extractor-ram-threads.ymlfile aligns with the overall configuration for Kotlin support, as evidenced by its presence in multiple workflow files. This suggests a deliberate effort to include Kotlin in the workflow processes.
Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify the impact of enabling Kotlin setup on the workflow. # Test: Check for Kotlin-related configurations and ensure they are properly set up. rg --type yaml 'setup-kotlin: true'Length of output: 37
Script:
#!/bin/bash # Description: Search for any Kotlin-related configurations or mentions in workflow files. # Test: Look for 'kotlin' keyword in YAML files within the .github/workflows directory. rg --type yaml 'kotlin' .github/workflowsLength of output: 3925
.github/workflows/__upload-ref-sha-input.yml (2)
61-61: Enable Kotlin setup.Adding
setup-kotlin: 'true'suggests Kotlin setup is now explicitly required. Ensure this aligns with the intended support for Kotlin in the workflow.Verification successful
Kotlin setup alignment verified.
The addition of
setup-kotlin: 'true'aligns with the intended support for Kotlin, as evidenced by multiple references to Kotlin configurations and logic across the codebase. The workflow change is consistent with existing Kotlin-related setups and tests.
pr-checks/checks/language-aliases.yml: Contains Kotlin in language aliases.pr-checks/sync.py: Handles Kotlin setup conditionally.src/init-action.ts: Mentions disabling Kotlin analysis via feature flags.Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify the impact of enabling Kotlin setup on the workflow. # Test: Check for Kotlin-related configurations and ensure they are properly set up. rg --type yaml 'setup-kotlin: true'Length of output: 37
Script:
#!/bin/bash # Description: Search for Kotlin-related configurations or mentions across the repository. # Search for any mention of Kotlin in YAML files to check for related configurations. rg --type yaml 'kotlin' -i # Additionally, search for Kotlin mentions in other common configuration files. rg 'kotlin' -iLength of output: 5474
71-71: Removal ofupload-databaseinput.The removal of the
upload-databaseinput from theanalyzeaction may affect how databases are handled. Verify that this change does not disrupt the workflow's intended functionality..github/workflows/__config-input.yml (2)
57-57: Enable Kotlin setup.The addition of
setup-kotlin: 'true'indicates Kotlin setup is now required. Verify that this change aligns with the intended support for Kotlin in the workflow.Verification successful
Kotlin setup verification complete.
The addition of
setup-kotlin: 'true'aligns with existing Kotlin-related configurations in the workflow, confirming the intended support for Kotlin. No further action is required.
- Kotlin is mentioned in language lists and associated with
build.gradlein several workflow files.Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify the impact of enabling Kotlin setup on the workflow. # Test: Check for Kotlin-related configurations and ensure they are properly set up. rg --type yaml 'setup-kotlin: true'Length of output: 37
Script:
#!/bin/bash # Description: Search for Kotlin-related configurations and dependencies in YAML workflow files. # Check for any Kotlin-related keywords in YAML files to ensure proper setup. rg --type yaml 'kotlin|gradle|kotlinc'Length of output: 427
31-31: Update version tolinked.Changing the version from
latesttolinkedsuggests a move towards more stable and predictable builds. Ensure that thelinkedversion is correctly configured and maintained.lib/resolve-environment.js (2)
26-26: Export change approved.The direct export of
runResolveBuildEnvironmentclarifies module exports.
43-46: Verify the removal of the version check.The removal of the version check for CodeQL compatibility assumes that all environments are suitable. Ensure that this change does not introduce compatibility issues.
Verification successful
Version check for language aliasing remains intact.
The version check for CodeQL compatibility regarding language aliasing is still present in
lib/resolve-environment.js. This ensures that the appropriate language input is used based on the CodeQL version, mitigating potential compatibility issues. The removal of another version check does not appear to introduce any new compatibility concerns.
- The version check at
lib/resolve-environment.jsensures compatibility with language aliasing.Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify that the removal of the version check does not affect compatibility. # Test: Search for usage of `codeQlVersionAtLeast` to ensure no other dependencies on this check exist. rg --type js 'codeQlVersionAtLeast'Length of output: 2429
Script:
#!/bin/bash # Examine the context around the usage of `codeQlVersionAtLeast` in `lib/resolve-environment.js` rg --type js -A 5 -B 5 'codeQlVersionAtLeast' lib/resolve-environment.jsLength of output: 811
.github/workflows/__swift-autobuild.yml (4)
6-6: Job name change approved.The update to "Swift analysis using autobuild" accurately reflects the new focus of the workflow.
25-32: Matrix configuration change approved.The simplification to "macos-latest" and "nightly-latest" aligns with the Swift focus and reduces complexity.
61-70: Swift setup steps approved.The addition of Swift setup and working directory check ensures proper environment configuration for analysis.
76-83: Database check step approved.The validation step ensures that a Swift database is created, which is essential for verifying the analysis process.
.github/workflows/__build-mode-rollback.yml (2)
57-57: Kotlin setup addition approved.The addition of
setup-kotlin: 'true'aligns with the enhanced support for Kotlin in the workflow.
57-57: Verify the impact of removing Java agent configuration.The removal of
CODEQL_EXTRACTOR_JAVA_AGENT_DISABLE_KOTLINmay affect Java analysis. Ensure this change does not introduce issues.lib/start-proxy-action-post.js (3)
2-24: Custom module binding functions are well-implemented.These functions ensure compatibility with different module systems.
Tools
Biome
[error] 19-19: Change to an optional chain.
Unsafe fix: Change to an optional chain.
(lint/complexity/useOptionalChain)
31-35: Imports are correctly structured and necessary.The imports are essential for the functionality provided in this file.
55-55: Appropriate usage ofvoidfor async function invocation.The use of
voidis correct to suppress unhandled promise rejections..github/workflows/__swift-custom-build.yml (2)
31-31: Change to specific versioning strategy is beneficial.Switching from
latesttolinkedenhances consistency and reliability in the workflow.
61-61: Explicit Kotlin setup improves clarity.Adding
setup-kotlin: 'true'ensures that Kotlin is set up explicitly, clarifying workflow requirements..github/workflows/debug-artifacts-failure.yml (1)
37-37: Switch to specific versioning enhances consistency.Changing the version from
latesttolinkedensures a stable testing environment..github/workflows/__autobuild-direct-tracing.yml (2)
31-33: Approved: Use ofversion: linked.Switching from
latesttolinkedfor theversionparameter can improve build stability by ensuring a consistent environment across runs.
63-63: Approved: Kotlin setup enabled.Setting
setup-kotlintotrueensures that Kotlin is properly configured, which is essential for Kotlin-based projects..github/workflows/__submit-sarif-failure.yml (3)
31-31: Approved: Use ofversion: linked.Switching from
latesttolinkedfor theversionparameter can improve build stability by ensuring a consistent environment across runs.
61-61: Approved: Kotlin setup enabled.Setting
setup-kotlintotrueensures that Kotlin is properly configured, which is essential for Kotlin-based projects.
66-66: Approved: Dynamic tools configuration.Referencing the
toolsparameter from a previous step's output enhances flexibility and maintainability in the workflow..github/workflows/debug-artifacts.yml (4)
25-31: Approved: Updated job matrix versions.The addition of
stable-v2.17.6and removal oflatestfocuses on specific stable versions, enhancing compatibility and reliability.
37-37: Approved: Change toruns-on: ubuntu-latest.Switching the
runs-onenvironment toubuntu-latestaligns with the focus on supported languages on Ubuntu, potentially improving compatibility.
56-57: Approved: Exclusion of Swift from languages.Excluding Swift from the languages list reflects a decision to focus on supported languages on Ubuntu, aligning with platform compatibility.
74-74: Approved: Update toVERSIONSvariable.Including
stable-v2.17.6in theVERSIONSvariable ensures comprehensive artifact verification, maintaining consistency across the workflow..github/actions/prepare-test/action.yml (4)
5-5: Description Update Approved forversionInput.The change to include "linked" as a valid option in the description aligns with the updated logic in the
runssection.
11-14: Addition ofsetup-kotlinInput Approved.The new
setup-kotlininput parameter enhances the workflow by allowing conditional Kotlin setup, with sensible defaults.
57-58: Logic Update forlinkedVersion Approved.The updated logic correctly handles the "linked" version, ensuring consistency with the input description.
66-69: Conditional Kotlin Setup Step Approved.The addition of the
fwilhe2/setup-kotlinstep, conditional on thesetup-kotlininput, is correctly implemented and enhances the workflow..github/workflows/__go-indirect-tracing-workaround.yml (1)
57-57: Addition ofsetup-kotlinInput Approved.The inclusion of the
setup-kotlininput parameter aligns with the workflow's objectives and enhances its configurability..github/workflows/__go-tracing-legacy-workflow.yml (3)
46-49: Matrix Version Updates Approved.The addition of new stable versions and removal of outdated ones aligns with the workflow's testing objectives.
55-57: Change fromlatesttolinkedVersion Approved.The update from
latesttolinkedfor the default version aligns with the workflow's dependency resolution strategy.
87-87: Addition ofsetup-kotlinInput Approved.The inclusion of the
setup-kotlininput parameter aligns with the workflow's objectives and enhances its configurability..github/workflows/__resolve-environment-action.yml (4)
82-82: Conditional language setup.The conditional setup for languages based on the version is a good practice. Ensure that all required languages are included for each version.
97-104: Conditional check for JavaScript/TypeScript configuration.The conditional check ensures that JavaScript/TypeScript configurations are only present for specific versions. This is a correct approach to maintain compatibility.
31-35: Update version numbers tostable-v2.13.5andlinked.The version numbers have been updated to
stable-v2.13.5andlinked. Ensure that all dependencies and configurations are compatible with these versions.Also applies to: 43-47
Verification successful
Version update to
stable-v2.13.5is consistent and without issues.The version
stable-v2.13.5is consistently used across the configuration files, and there are no indications of compatibility problems or specific changes related to this update. The transition appears to be smooth and correctly implemented.
- The old version
stable-v2.13.4is no longer referenced.- No comments or notes suggest any issues with
stable-v2.13.5.Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify compatibility of updated version numbers. # Test: Check for any references to the old version `stable-v2.13.4`. rg --type yaml 'stable-v2.13.4'Length of output: 31
Script:
#!/bin/bash # Description: Verify consistency and any notes regarding `stable-v2.13.5`. # Test: Check for any references to the new version `stable-v2.13.5`. rg --type yaml 'stable-v2.13.5' -A 2 # Test: Check for any notes or comments regarding version changes. rg --type yaml '#.*version' -A 2Length of output: 3284
79-79: Set up Kotlin explicitly.The
setup-kotlin: 'true'parameter is added, indicating explicit Kotlin setup. Ensure that this setup is required and correctly configured in the workflow.Verification successful
Kotlin setup is necessary and correctly configured.
The repository contains Kotlin code, and the
setup-kotlin: 'true'configuration is consistently used across multiple GitHub Actions workflows. This indicates that the Kotlin setup is required and appropriately configured for the workflows.Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify the necessity and correctness of Kotlin setup. # Test: Check for any Kotlin-related configurations or dependencies. rg --type yaml 'setup-kotlin'Length of output: 29
Script:
#!/bin/bash # Search for Kotlin-related files in the repository. fd --extension kt # Search for any Kotlin-related configurations in all YAML files. rg --type yaml 'kotlin' # Search for any references to Kotlin in GitHub Actions workflows. rg --type yaml 'kotlin' .github/workflows/Length of output: 4228
.github/workflows/__split-workflow.yml (2)
31-33: Consider implications of version change tolinked.The versioning for
ubuntu-latestandmacos-latesthas been changed fromlatesttolinked. Ensure that this change aligns with the project's stability and compatibility requirements.Verification successful
The change to
linkedversioning aligns with project goals.The use of
linkedspecifies that the tools or environments used are consistent with the version of the Action, as noted in theCHANGELOG.md. This change likely enhances compatibility and stability, aligning with the project's requirements. No further documentation was found discussing additional implications.
- Refer to
CHANGELOG.mdfor more details on thelinkedversioning.Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify the impact of changing versioning to `linked`. # Test: Search for documentation or discussions on the implications of using `linked` versions. rg --type md 'linked' README.mdLength of output: 31
Script:
#!/bin/bash # Description: Search for mentions of `linked` in markdown and YAML files to understand its implications. # Search for `linked` in all markdown and YAML files. rg 'linked' --type md --type yamlLength of output: 7104
67-67: Ensure Kotlin setup is necessary.The
setup-kotlin: 'true'parameter has been added. Verify that Kotlin setup is required for this workflow, as it primarily deals with JavaScript projects..github/workflows/__remote-config.yml (3)
103-103: Ensure Kotlin setup is necessary.The
setup-kotlin: 'true'parameter has been added. Verify that Kotlin setup is required for this workflow, as it primarily deals with multiple languages.
67-71: Consider implications of version change tolinked.The versioning for
ubuntu-latest,macos-latest, andwindows-latesthas been changed fromlatesttolinked. Ensure that this change aligns with the project's stability and compatibility requirements.Verification successful
Version change to
linkedaligns with stability goalsThe change from
latesttolinkedfor versioning in the GitHub Actions workflow is intended to ensure that the tools used are consistent with the version of the Action, as mentioned in theCHANGELOG.md. This approach can enhance stability by preventing unexpected updates. Ensure this aligns with your project's specific stability and compatibility requirements.Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify the impact of changing versioning to `linked`. # Test: Search for documentation or discussions on the implications of using `linked` versions. rg --type md 'linked' README.mdLength of output: 31
Script:
#!/bin/bash # Description: Search for the term 'linked' in all markdown files to find any documentation. rg --type md 'linked' # Description: Search for the term 'linked' in all GitHub Actions workflow files to understand its usage. rg 'linked' .github/workflows/Length of output: 10081
54-59: Review new OS versions for compatibility.New OS versions
stable-v2.17.6have been added. Ensure these versions are compatible with the project's requirements and dependencies..github/workflows/__go-custom-queries.yml (2)
54-59: Matrix version updates look good.The updates to include
stable-v2.17.6and replacelatestwithlinkedensure compatibility with recent versions and maintain a stable environment.Also applies to: 67-71
103-103: Addition ofsetup-kotlinis appropriate.The inclusion of
setup-kotlin: 'true'likely improves the Kotlin setup process in the workflow..github/workflows/codeql.yml (4)
44-44: Update totools: linkedis appropriate.Switching from
latesttolinkedprovides a more controlled environment for CodeQL tools.
66-66: Update toVERSIONS_JSONis appropriate.Including
linkedensures tests are run with both default and linked bundles, enhancing test coverage.
78-78: OS matrix update to includemacos-14is beneficial.This addition enhances compatibility and expands the environments for CodeQL analysis.
100-101: Addition ofcategoryparameter is appropriate.Specifying the language with
category: "/language:javascript"adds clarity to the workflow..github/workflows/__go-tracing-autobuilder.yml (2)
46-49: Matrix version updates look good.The updates to include
stable-v2.17.6and replacelatestwithlinkedensure compatibility with recent versions and maintain a stable environment.Also applies to: 55-57
87-87: Addition ofsetup-kotlinis appropriate.The inclusion of
setup-kotlin: 'true'likely improves the Kotlin setup process in the workflow..github/workflows/__packaging-config-js.yml (2)
73-73: Kotlin setup added.The
setup-kotlin: 'true'parameter has been added to the configuration. Ensure that this setup is necessary and correctly configured for Kotlin-related tasks.
31-35: Ensure compatibility withlinkedversions.The matrix version has been changed from
latesttolinkedfor multiple operating systems. This change aims to ensure compatibility with specific versions. Verify that thelinkedversions are correctly defined and compatible with your dependencies.Verification successful
Ensure compatibility with
linkedversions is verified.The
linkedversion is a special value used to specify the version of the CodeQL tools, as mentioned ininit/action.yml. This aligns with ensuring compatibility with specific versions of the CodeQL CLI, as indicated by comments in other YAML files. The review comment is accurate in its suggestion to verify compatibility withlinkedversions.
init/action.yml: Mentionslinkedas a special value for CodeQL tools.- Other YAML files use
linkedfor versioning, with comments about compatibility.Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify that the 'linked' versions are correctly defined and compatible. # Check if the linked versions are specified in the workflow files. rg --type yaml 'version: linked'Length of output: 34
Script:
#!/bin/bash # Search for occurrences of 'linked' across the repository to find any definitions or references. rg 'linked'Length of output: 299908
Script:
#!/bin/bash # Search for occurrences of 'linked' specifically within YAML files to find any definitions or references related to GitHub Actions workflows. rg 'linked' --type yamlLength of output: 3476
.github/workflows/__packaging-config-inputs-js.yml (2)
31-35: Ensure compatibility withlinkedversions.The matrix version has been changed from
latesttolinkedfor multiple operating systems. This change aims to ensure compatibility with specific versions. Verify that thelinkedversions are correctly defined and compatible with your dependencies.
73-73: Kotlin setup added.The
setup-kotlin: 'true'parameter has been added to the configuration. Ensure that this setup is necessary and correctly configured for Kotlin-related tasks..github/workflows/__packaging-inputs-js.yml (2)
31-35: Ensure compatibility withlinkedversions.The matrix version has been changed from
latesttolinkedfor multiple operating systems. This change aims to ensure compatibility with specific versions. Verify that thelinkedversions are correctly defined and compatible with your dependencies.
73-73: Kotlin setup added.The
setup-kotlin: 'true'parameter has been added to the configuration. Ensure that this setup is necessary and correctly configured for Kotlin-related tasks..github/workflows/__packaging-codescanning-config-inputs-js.yml (2)
31-35: Use stable environment versions.Changing
version: latesttoversion: linkedindicates a move towards more stable and controlled environments, which can improve build consistency.
73-73: Ensure Kotlin setup is necessary.Adding
setup-kotlin: 'true'explicitly sets up Kotlin, which could impact the build process if Kotlin dependencies are involved. Ensure this is necessary for your project..github/workflows/__config-export.yml (2)
31-35: Use stable environment versions.The update from
version: latesttoversion: linkedfor the OS matrix helps maintain build consistency by using stable versions.
67-67: Verify the need for Kotlin setup.The addition of
setup-kotlin: 'true'suggests a focus on Kotlin support. Verify that this setup is required for your project..github/workflows/__go-tracing-custom-build-steps.yml (3)
46-49: Update to newer stable versions.Including
stable-v2.17.6for both Ubuntu and macOS ensures using the latest stable features and improvements.
55-57: Use stable environment versions.Switching to
version: linkedfromversion: latestenhances stability and consistency across builds.
87-87: Confirm Kotlin setup necessity.Adding
setup-kotlin: 'true'implies Kotlin dependencies. Confirm that this is required for your Go project..github/workflows/__with-checkout-path.yml (2)
31-35: Good practice: Use specific versions instead oflatest.Changing the matrix version from
latesttolinkedenhances consistency and predictability across CI runs.
61-61: Explicit Kotlin setup is beneficial.Adding
setup-kotlin: 'true'ensures that Kotlin dependencies are managed properly, enhancing the build process..github/workflows/__init-with-registries.yml (2)
37-41: Good practice: Use specific versions instead oflatest.Changing the matrix version from
latesttolinkedenhances consistency and predictability across CI runs.
74-74: Explicit Kotlin setup is beneficial.Adding
setup-kotlin: 'true'ensures that Kotlin dependencies are managed properly, enhancing the build process.lib/diagnostics.js (3)
6-9: Improved export organization.Reordering export statements enhances readability and maintainability without altering functionality.
41-43: Enhanced robustness inaddDiagnostic.The updated logic for determining
databasePathensures correct path setting even whenlanguageis not specified, preventing potential errors.
63-66: Consistent path determination inwriteDiagnostic.Using the newly defined
databasePathfordiagnosticsPathcomputation maintains consistency and reinforces the updated logic.eslint.config.mjs (3)
25-34: Review ignored files and directories.Ensure that the ignored files and directories are correct and necessary for your project setup. This list includes common directories like
lib,tests, and.github.
36-45: Check compatibility with extended configurations.The
compat.extendsfunction is used to extend configurations. Verify that these configurations are compatible with your codebase.
80-133: Review ESLint rules for potential improvements.The rules section contains various configurations. Ensure these rules align with your project's coding standards and consider adjusting them if necessary.
lib/database-upload.js (2)
26-26: Export statement updated for clarity.The export statement now directly references the
uploadDatabasesfunction, which is a good practice for clarity and maintainability.
38-41: Test mode check added touploadDatabases.The addition of a test mode check is a beneficial change to prevent unnecessary uploads during testing. Ensure that this mode is correctly set and used in your testing environment.
lib/tracer-config.js (3)
35-47: FunctionshouldEnableIndirectTracingsimplified.The logic in
shouldEnableIndirectTracinghas been simplified by removing thefeaturesparameter and focusing on build mode conditions. This enhances clarity and maintainability.
Line range hint
58-75:
FunctionendTracingForClusterupdated.The function has been updated to remove the
featuresparameter, aligning with the changes inshouldEnableIndirectTracing. Ensure that this change does not affect other parts of the codebase that might rely on thefeaturesparameter.
Line range hint
87-104:
FunctiongetCombinedTracerConfigstreamlined.The removal of the
featuresparameter fromgetCombinedTracerConfigsimplifies the function. Check for any dependencies on thefeaturesparameter elsewhere in the codebase..github/workflows/pr-checks.yml (4)
66-66: Verify conditional logic forcheck-file-contents.Ensure that the conditional logic correctly reflects the desired execution conditions. The current condition prevents execution on non-main branches unless they start with
releases/v.
91-91: Verify conditional logic fornpm-test.Ensure that the conditional logic correctly reflects the desired execution conditions. The current condition prevents execution on non-main branches unless they start with
releases/v.
55-55: Verify conditional logic forcheck-node-modules.Ensure that the conditional logic correctly reflects the desired execution conditions. The current condition prevents execution on non-main branches unless they start with
releases/v.Verification successful
Conditional Logic for
check-node-modulesis Correctly ImplementedThe conditional logic in the workflow file matches the intended behavior described in the review comment. The job is configured to run on events other than
push, on themainbranch, and on branches starting withreleases/v. No changes are necessary.Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify the conditional logic for `check-node-modules`. # Test: Search for all instances of `check-node-modules` in the workflow file. # Expect: The if condition matches the intended workflow behavior. rg --type yaml 'check-node-modules'Length of output: 35
Script:
#!/bin/bash # Description: Search for the conditional logic snippet in the workflow file to gather more context. rg --type yaml 'if: github.event_name != '\''push'\'' || github.ref == '\''refs/heads/main'\'' || startsWith(github.ref, '\''refs/heads/releases/v'\'')' .github/workflows/pr-checks.yml -A 5Length of output: 5351
111-111: Verify conditional logic forcheck-node-version.The condition has been simplified, but ensure it aligns with the intended workflow behavior. The job now runs only for pull requests.
Verification successful
Conditional Logic Verified for
check-node-versionThe
check-node-versionjob is correctly configured to run only on pull request events with the conditionif: github.event.pull_request. This aligns with the intended workflow behavior. No issues found.Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify the conditional logic for `check-node-version`. # Test: Search for all instances of `check-node-version` in the workflow file. # Expect: The if condition matches the intended workflow behavior. rg --type yaml 'check-node-version'Length of output: 35
Script:
#!/bin/bash # Description: Search for any jobs or steps related to node version checks in the workflow file. # Test: Search for any references to node version checks in the workflow file. rg --type yaml 'node' .github/workflows/pr-checks.yml -A 5Length of output: 3014
lib/tracer-config.test.js (3)
70-70: Verify removal of third argument ingetCombinedTracerConfig.Ensure that the removal of
(0, testing_utils_1.createFeatures)([])does not affect the test logic or outcomes. Verify that the function handles the change correctly.
105-105: Verify removal of third argument ingetCombinedTracerConfig.Ensure that the removal of
(0, testing_utils_1.createFeatures)([])does not affect the test logic or outcomes. Verify that the function handles the change correctly.
49-49: Verify removal of third argument ingetCombinedTracerConfig.Ensure that the removal of
(0, testing_utils_1.createFeatures)([])does not affect the test logic or outcomes. Verify that the function handles the change correctly.Verification successful
Removal of Third Argument in
getCombinedTracerConfigVerifiedThe function
getCombinedTracerConfigis correctly defined to accept only two arguments,codeqlandconfig. The test cases have been updated to match this signature, and the logic within the function does not depend on a third argument. Therefore, the removal does not affect the test logic or outcomes.Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify the impact of removing the third argument in `getCombinedTracerConfig`. # Test: Search for all instances of `getCombinedTracerConfig` in the test file. # Expect: The function calls match the new signature and tests pass without the third argument. rg --type js 'getCombinedTracerConfig'Length of output: 1219
Script:
#!/bin/bash # Extract the implementation of `getCombinedTracerConfig` to verify how it handles the absence of the third argument. ast-grep --lang javascript --pattern 'async function getCombinedTracerConfig($_, $_) { $$$ }'Length of output: 1664
.github/workflows/__unset-environment.yml (3)
76-77: Verify exclusion of Swift on Ubuntu.Ensure that the exclusion of Swift from the supported languages list aligns with the intended testing strategy on Ubuntu.
Verification successful
Swift is correctly excluded from the supported languages on Ubuntu.
The
unset-environment.ymlfile does not list Swift among the supported languages, aligning with the intended testing strategy on Ubuntu. Other YAML files do include Swift, indicating its use in different contexts or environments. No further action is needed.Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify the exclusion of Swift from the supported languages on Ubuntu. # Test: Search for all instances of `languages` in the workflow file. # Expect: Swift is excluded from the list for Ubuntu. rg --type yaml 'languages'Length of output: 5254
71-71: Verify Kotlin setup configuration.Ensure that the
setup-kotlinparameter is correctly configured for the new environment. Confirm that it aligns with the intended testing strategy.Verification successful
Kotlin setup configuration appears consistent across workflows.
The
setup-kotlinparameter is consistently set to'true'in multiple workflow files, including.github/workflows/__unset-environment.yml. This suggests alignment with a common configuration strategy. If further verification against specific testing requirements is necessary, a manual review is recommended.Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify the `setup-kotlin` configuration in the workflow file. # Test: Search for all instances of `setup-kotlin` in the workflow file. # Expect: The configuration aligns with the intended testing strategy. rg --type yaml 'setup-kotlin'Length of output: 29
Script:
#!/bin/bash # Description: Search for `setup-kotlin` in all files to verify its presence and configuration. # Test: Search for all instances of `setup-kotlin` in the entire repository. # Expect: To find the configuration and verify its correctness. rg 'setup-kotlin' --hidden --glob '!.git/**'Length of output: 4049
30-44: Verify job matrix changes.Ensure that the job matrix changes align with the intended testing strategy. The shift to
ubuntu-latestand the specified versions should be confirmed to meet testing requirements.Verification successful
Job matrix changes verified successfully.
The job matrix in
.github/workflows/__unset-environment.ymlincludes a comprehensive range of versions, from stable releases to the latest nightly build. This aligns well with a robust testing strategy aimed at ensuring compatibility across different stages of software release.
- Versions included: stable-v2.13.5, stable-v2.14.6, stable-v2.15.5, stable-v2.16.6, stable-v2.17.6, default, linked, and nightly-latest.
Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify the job matrix changes in the workflow file. # Test: Search for all instances of `ubuntu-latest` in the workflow file. # Expect: The job matrix aligns with the intended testing strategy and includes all necessary versions. rg --type yaml 'ubuntu-latest'Length of output: 30
Script:
#!/bin/bash # Verify the existence of the .github/workflows/__unset-environment.yml file and search for 'ubuntu-latest' in it. # Check if the file exists if [ -f ".github/workflows/__unset-environment.yml" ]; then # Search for 'ubuntu-latest' in the file rg 'ubuntu-latest' .github/workflows/__unset-environment.yml else echo "File .github/workflows/__unset-environment.yml does not exist." fiLength of output: 355
Script:
#!/bin/bash # Extract context around 'ubuntu-latest' entries to verify associated versions in the workflow file. # Show 3 lines of context around each match to capture associated versions rg 'ubuntu-latest' .github/workflows/__unset-environment.yml -C 3Length of output: 696
.github/workflows/__diagnostics-export.yml (4)
67-67: Verify Kotlin setup.The
setup-kotlinparameter is set to'true'. Ensure this change is intentional and that Kotlin is required for the workflow.Verification successful
Kotlin setup is intentional and consistent across workflows.
The
setup-kotlin: 'true'parameter is used in multiple workflow files, indicating that Kotlin setup is a common requirement. This suggests that the change is intentional and aligns with the overall configuration strategy. No further action is needed.Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify the usage of `setup-kotlin` in the workflow. # Test: Check for `setup-kotlin` parameter usage in the workflow file. rg --type yaml $'setup-kotlin: \'true\''Length of output: 45
Script:
#!/bin/bash # Description: Re-verify the usage of `setup-kotlin` in the workflow files. # Test: Search for any instances of `setup-kotlin` in the .github/workflows directory. rg 'setup-kotlin' .github/workflowsLength of output: 3681
31-35: Simplify the job matrix.The job matrix now uses a single
linkedversion entry for each OS. Ensure this change aligns with your versioning strategy and does not omit necessary test cases.
78-84: Streamline diagnostic addition.The diagnostic addition step has been streamlined to a single entry. Ensure this meets your diagnostic requirements and does not omit necessary diagnostics.
Verification successful
Streamlined diagnostic addition confirmed.
The diagnostic addition step has been successfully streamlined to a single entry in the repository, as indicated by the review comment. There are no other occurrences of the
database add-diagnosticcommand.
- Location:
pr-checks/checks/diagnostics-export.ymlScripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify the diagnostic addition step in the workflow. # Test: Check for the diagnostic addition command in the workflow file. rg --type yaml $'database add-diagnostic'Length of output: 129
Script:
#!/bin/bash # Description: Search for all occurrences of the `database add-diagnostic` command in the repository. rg 'database add-diagnostic'Length of output: 117
104-107: Check status page notification logic.Ensure the expected message in the status page notification matches the actual output. This is crucial for accurate diagnostic reporting.
Verification successful
Status page notification logic is correctly implemented.
The logic to verify the expected message in the status page notification is present and functioning as intended. The code checks if the message text matches the expected value and sets a failure if it does not. No issues were found with this logic.
Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify the status page notification logic in the workflow. # Test: Check the expected message in the status page notification logic. rg --type javascript $'Expected the status page diagnostic to have the message'Length of output: 115
Script:
#!/bin/bash # Description: Verify the status page notification logic in the workflow. # Test: Check the expected message in the status page notification logic. rg 'Expected the status page diagnostic to have the message' .github/workflows/__diagnostics-export.yml -A 5Length of output: 478
.github/workflows/__multi-language-autodetect.yml (3)
154-155: Check Swift language autodetection condition.The condition for Swift language autodetection is now specific to macOS. Ensure this change aligns with your platform requirements and does not exclude necessary cases.
Verification successful
Swift language autodetection condition is appropriate.
The condition for Swift language autodetection being specific to macOS is justified by the comment in the workflow file, which states that Swift is not supported on Ubuntu. This aligns with platform requirements and does not exclude necessary cases.
- Comment in
pr-checks/checks/multi-language-autodetect.ymlexplains the exclusion of Swift on Ubuntu.Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify the Swift language autodetection condition in the workflow. # Test: Check the condition for Swift language autodetection in the workflow file. rg --type yaml $'runner.os == \'macOS\''Length of output: 197
Script:
#!/bin/bash # Description: Search for comments or documentation related to the Swift language autodetection condition in the workflow file. # Search for comments in the workflow file for context on the macOS condition. rg --type yaml --context 5 'runner.os == '\''macOS'\''' pr-checks/checks/multi-language-autodetect.ymlLength of output: 1018
31-61: Expanded job matrix for multiple versions.The job matrix now includes multiple stable versions for macOS and Ubuntu. Ensure these versions are necessary and align with your testing strategy.
Verification successful
Expanded job matrix confirmed
The
.github/workflows/__multi-language-autodetect.ymlfile indeed includes multiple stable versions for macOS and Ubuntu as part of the job matrix. This aligns with the review comment's observation about the expanded job matrix. Ensure these versions are necessary for your testing strategy.
- Versions included:
stable-v2.13.5,stable-v2.14.6,stable-v2.15.5,stable-v2.16.6,stable-v2.17.6Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify the expanded job matrix in the workflow. # Test: Check for the presence of multiple stable versions in the workflow file. rg --type yaml $'version: stable-v'Length of output: 36
Script:
#!/bin/bash # Re-run the search for stable versions in the workflow file with a broader pattern. rg --type yaml 'version: stable-v' -A 1Length of output: 41
Script:
#!/bin/bash # Directly view the contents of the specified workflow file to verify job matrix entries. cat .github/workflows/__multi-language-autodetect.ymlLength of output: 6010
87-87: Verify Kotlin setup.The
setup-kotlinparameter is set to'true'. Ensure this change is necessary for the workflow and that Kotlin is required.lib/init.test.js (2)
53-68: Ensure comprehensive test coverage for cleanup.The test
cleanupDatabaseClusterDirectory cleans up where possiblechecks the cleanup process and logs. Ensure it covers all necessary scenarios for directory cleanup.
69-109: Validate error handling in cleanup tests.The tests for error handling in
cleanupDatabaseClusterDirectoryensure correct exceptions are thrown. Verify that all expected error scenarios are covered.lib/debug-artifacts.js (2)
29-33: Export statements are well-placed after function definitions.The export statements have been moved to after the function definitions, which improves code readability and logical flow.
58-58: Ensure the catch block handles JSON parsing errors.The catch block logs a message if the matrix input cannot be parsed. Ensure that this is sufficient for your use case and consider logging the error for debugging purposes.
init/action.yml (1)
142-143: New output parametercodeql-versionis correctly added.The addition of the
codeql-versionoutput parameter enhances the action's functionality by providing additional information..github/workflows/codescanning-config-cli.yml (1)
31-33: LGTM! Ensure the impact on the CI/CD pipeline is verified.The change from
version: latesttoversion: linkedcan improve build consistency by using specific versions. Ensure that these linked versions are correctly configured and tested in your CI/CD pipeline.lib/init.js (3)
26-32: LGTM! Export reordering andinitCodeQLchanges improve clarity and functionality.The reordering of exports enhances code organization. The change in
initCodeQLto usetoolsDownloadStatusReportinstead oftoolsDownloadDurationMslikely provides more comprehensive reporting.
62-71: LGTM! Verify the impact of removing thefeaturesparameter.The removal of the
featuresparameter fromrunInitsimplifies the function. Ensure that this change does not negatively impact other parts of the codebase that might rely on this parameter.
116-149: LGTM! ThecleanupDatabaseClusterDirectoryfunction adds valuable error handling.The function enhances robustness by providing detailed error handling and feedback for different environments, improving reliability.
lib/autobuild.js (3)
26-33: LGTM! Export reordering and documentation link improvements enhance clarity and maintainability.The reordering of exports improves code organization. Using a constant for documentation links in
determineAutobuildLanguagesensures easier updates and better maintainability.
122-127: LGTM! Documentation link structure insetupCppAutobuildimproves user experience.The updated logging messages ensure users are directed to the correct documentation, enhancing clarity and usability.
136-143: LGTM! Verify the impact of removing thefeaturesparameter inrunAutobuild.The removal of the
featuresparameter simplifies the function. Ensure that this change does not negatively impact other parts of the codebase that might rely on this parameter.lib/setup-codeql.test.js (1)
118-122: LGTM! Verify the usage of the new structure in tests.The restructuring of the
statusReportobject in the stubbeddownloadCodeQLfunction enhances clarity. Ensure that the tests correctly utilize this new structure.Verification successful
Verification Successful: New
statusReportStructure Utilized in TestsThe restructuring of the
statusReportobject is correctly utilized in the tests. Assertions in test files confirm that the new structure is being checked for expected values.
lib/setup-codeql.test.js: Direct usage ofstatusReportin test cases.lib/status-report.test.js: Assertions verifyingstatusReportproperties.lib/trap-caching.test.js: Checks involvingstatusReport.Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify the usage of the new `statusReport` structure in tests. # Test: Search for the usage of `statusReport`. Expect: Correct utilization in assertions. rg --type js 'statusReport'Length of output: 14170
Script:
#!/bin/bash # Description: Search for `statusReport` usage in test files with context to verify correct utilization in assertions. rg --type js 'statusReport' -A 5 -g '*test.js'Length of output: 8498
lib/api-client.js (2)
30-41: Reordering of exports improves readability.The reorganization of export statements enhances the clarity of the module's interface.
126-132: Verify the regex logic ingetWorkflowRelativePath.The regex check optimizes the function by reducing unnecessary API calls. Ensure that it correctly identifies invalid workflow URLs.
lib/init-action-post-helper.js (3)
26-28: Reordering of exports improves clarity.The explicit assignment of exports enhances the module's interface clarity.
139-155: Verify enhancements inrunfunction.The new logic for cleaning up the database cluster directory improves resource management. Ensure that the error handling and conditions are correctly implemented.
Verification successful
Enhancements in
runfunction verified successfully.The logic for cleaning up the database cluster directory is well-implemented with appropriate error handling and condition checks. The use of a try-catch block ensures errors are logged without disrupting the flow, and the condition to check for a self-hosted runner is correctly applied.
- Confirmed the presence of
fs.rmSyncusage inlib/init-action-post-helper.js.- Error handling and conditions are correctly implemented.
Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify the enhancements in the `run` function. # Test: Search for `fs.rmSync` usage. Expect: Correct error handling and conditions. rg --type js 'fs.rmSync'Length of output: 325
77-80: Verify changes inmaybeUploadFailedSarif.The simplification of the
databaseExportDiagnosticscall likely reflects a change in diagnostics processing. Ensure that the new logic is correct.lib/fingerprints.js (3)
29-31: Export statements improved.The export statements have been reordered and simplified, enhancing the readability of the module's interface.
203-203: Streamlined error handling.The catch block now omits the unused error parameter, which is a good practice when the error object is not needed.
242-242: Improved logging with dynamic URL reference.The logging message now uses a dynamic URL reference, enhancing maintainability.
lib/cli-errors.js (4)
3-5: Reordered export statements for better organization.The export order of functions has been adjusted, improving code organization without altering functionality.
23-32: Consistent error message formatting.The use of
ensureEndsInPeriodensures that fatal error messages are consistently formatted, which is a good practice.
74-74: Enhanced regex pattern for error detection.The regex pattern now accommodates variations in the error message format, increasing robustness.
Line range hint
118-133:
Expanded error categorization.The
CliConfigErrorCategoryenumeration andcliErrorsConfigobject have been expanded, allowing for more granular categorization of CLI errors.Also applies to: 142-231
lib/status-report.js (2)
26-31: Improved export structure.The restructuring of exports enhances readability and clarity regarding the module's public API.
Line range hint
257-281:
Enhanced error logging.The error handling in
sendStatusReporthas been refined with more descriptive logging messages, improving the debugging process.lib/analyze-action.js (4)
Line range hint
111-138:
Simplified function signature.The removal of the
featuresparameter fromrunAutobuildIfLegacyGoWorkflowsimplifies the function signature without affecting its logic.
173-173: Updated function call for consistency.The function call to
runAutobuildIfLegacyGoWorkflowhas been updated to match its new signature, ensuring consistency.
189-189: Refactored upload function call.The call to
uploadLib.uploadFilesreflects an update in the upload mechanism, allowing it to utilize feature flags more effectively.
223-225: Improved error handling.The consolidation of error handling using a ternary operator enhances code readability and reduces redundancy.
lib/init-action-post-helper.test.js (2)
318-322: Updated stub method and version.The stub method for uploads has been updated to
uploadFiles, and the CodeQL version has been updated to "2.17.6". These changes align the test with the updated functionality.
340-352: Adjusted test assertions.The test assertions have been adjusted to verify the expected behavior of the updated
uploadFilesmethod accurately.lib/analyze.js (4)
54-59: Enhanced error handling inCodeQLAnalysisError.The inclusion of an
errorparameter in the constructor allows for more detailed error information, enhancing error handling capabilities.
29-35: Restructured export statements for clarity.The restructuring of export statements improves the readability and maintainability of the code.
189-189: Refined error handling inrunQueries.The refinement to wrap and pass the original error enhances the traceability of errors during query execution.
Line range hint
222-235:
Simplified function signature inrunFinalize.The removal of the
featuresparameter simplifies the function signature, aligning with potential design changes.lib/feature-flags.js (4)
49-49: UpdateFeatureenum with new feature flag.The
Featureenum has been updated to includeDisableCsharpBuildless. Ensure that this new feature flag is correctly integrated and used where applicable.
67-70: Add configuration forDisableCsharpBuildless.The
featureConfigobject now includes a configuration forDisableCsharpBuildless. Verify that this configuration is correctly utilized in the application logic.
212-212: Simplify filtering logic inGitHubFeatureFlags.The filtering logic in
GitHubFeatureFlagshas been simplified. Ensure that this change does not affect the intended behavior of the feature flag processing.
26-26: Verify removal ofCODEQL_VERSION_BUNDLE_SEMANTICALLY_VERSIONED.The export for
CODEQL_VERSION_BUNDLE_SEMANTICALLY_VERSIONEDhas been removed. Ensure that any references to this export elsewhere in the codebase are also removed or updated.Verification successful
Removal of
CODEQL_VERSION_BUNDLE_SEMANTICALLY_VERSIONEDverified.There are no remaining references to
CODEQL_VERSION_BUNDLE_SEMANTICALLY_VERSIONEDin the codebase, confirming its successful removal.Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify removal of `CODEQL_VERSION_BUNDLE_SEMANTICALLY_VERSIONED`. # Test: Search for any remaining references to `CODEQL_VERSION_BUNDLE_SEMANTICALLY_VERSIONED`. rg --type javascript 'CODEQL_VERSION_BUNDLE_SEMANTICALLY_VERSIONED'Length of output: 102
Script:
#!/bin/bash # Description: Verify removal of `CODEQL_VERSION_BUNDLE_SEMANTICALLY_VERSIONED`. # Test: Search for any remaining references to `CODEQL_VERSION_BUNDLE_SEMANTICALLY_VERSIONED` with the correct file type. rg --type js 'CODEQL_VERSION_BUNDLE_SEMANTICALLY_VERSIONED'Length of output: 59
lib/actions-util.js (4)
107-107: Simplify error handling ingetCommitOid.The error handling in
getCommitOidhas been simplified by removing the error parameter. This change improves clarity and reduces unnecessary variable declarations.
164-164: Simplify error handling indetermineMergeBaseCommitOid.The error handling in
determineMergeBaseCommitOidhas been simplified by removing the error parameter. This change improves clarity and reduces unnecessary variable declarations.
429-431: AddisSelfHostedRunnerfunction.The
isSelfHostedRunnerfunction has been added to check if the runner is self-hosted. Ensure that this function is used appropriately where needed.
26-39: Verify removal of multiple exports.Several functions have been removed from the exports list. Ensure that these functions are not used elsewhere in the codebase or are accessed differently.
lib/init-action.js (6)
47-47: UpdatesendCompletedStatusReportfunction signature.The function signature has been updated to replace
toolsDownloadDurationMswithtoolsDownloadStatusReport. Ensure that this change is reflected in all calls to this function.
61-63: HandletoolsDownloadStatusReportin status report.The
toolsDownloadStatusReportis now used to populate thetools_download_duration_msfield. Ensure that this object is correctly constructed and used.
86-103: Enhance status report with additional fields.Additional fields such as
packs,query_filters, andregistrieshave been added to the status report. Verify that these fields are correctly populated and useful for reporting.
133-133: Update variable totoolsDownloadStatusReport.The variable
toolsDownloadDurationMshas been replaced withtoolsDownloadStatusReport. Ensure that this change is consistent throughout the code.
206-220: Log CodeQL download telemetry.The CodeQL download telemetry is now logged if
toolsDownloadStatusReportis available. Ensure that this telemetry is useful for diagnostics and monitoring.
369-375: Update error handling inrunfunction.The error handling in the
runfunction has been updated to accommodate the new status report structure. Ensure that errors are reported accurately.lib/setup-codeql.js (3)
459-461: Ensure compatibility with semantic versioning.The logic for determining the toolcache version has been updated to use semantic versioning. Verify that this aligns with the rest of the codebase and does not introduce inconsistencies.
Line range hint
369-430: Ensure proper handling of download and extraction durations.The
downloadCodeQLfunction now returns astatusReportobject with download and extraction durations. Verify that this change is correctly handled in all places where the function is used.
Line range hint
480-503: Review the return structure ofsetupCodeQLBundle.The function now returns a
toolsDownloadStatusReportobject. Ensure that all consumers of this function are updated to handle the new structure correctly.lib/config-utils.js (2)
26-50: Review the restructuring of export statements.The export statements have been restructured for clarity. Ensure that all necessary functions and constants are exported as intended and that there are no missing exports.
511-516: Security enhancement withparseRegistriesWithoutCredentials.The new function processes registries without exposing credentials. Ensure that this function is used wherever registry parsing is required to enhance security.
Verification successful
Security enhancement verified for
parseRegistriesWithoutCredentials.The function
parseRegistriesWithoutCredentialsis used across the codebase, ensuring registry parsing without exposing credentials, as recommended.
- Files where it is used:
src/init-action.tslib/init-action.jsScripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify usage of `parseRegistriesWithoutCredentials`. # Test: Search for registry parsing logic. Expect: Use of `parseRegistriesWithoutCredentials`. rg --type javascript 'parseRegistries'Length of output: 73
Script:
#!/bin/bash # Description: Verify usage of `parseRegistriesWithoutCredentials`. # Test: Search for usage of `parseRegistriesWithoutCredentials`. rg 'parseRegistriesWithoutCredentials'Length of output: 528
lib/codeql.test.js (12)
29-29: ExportstubToolRunnerConstructorfor testing.The function
stubToolRunnerConstructoris now exported, which is useful for testing purposes. Ensure that this change does not inadvertently expose the function in unintended contexts.
104-104: Verify download duration reporting in tests.The test now checks for
toolsDownloadStatusReport?.downloadDurationMs. Ensure that this change accurately reflects the updated logic and is consistent across all relevant tests.
121-121: Ensure semantic versioning in test assertions.The test checks for semantic versioning in the toolcache. Verify that this aligns with the code changes and does not introduce inconsistencies.
139-139: Check for download duration reporting consistency.The test ensures that
toolsDownloadStatusReport?.downloadDurationMsis an integer. Verify that this check is consistent across all tests that involve download operations.
144-149: Update test cases for new tag names.The test cases have been updated to reflect new tag names for explicitly requested bundles. Ensure that these updates are consistent with the changes in the main codebase.
153-165: Verify caching logic for requested bundles.The test ensures that explicitly requested bundles are cached correctly. Verify that this logic aligns with the updated caching strategy in the codebase.
Line range hint
445-462: Test for qlconfig and code scanning config injection.The test checks that both a qlconfig and a code scanning config are passed to the CLI. Ensure that this behavior is consistent with the intended functionality.
516-519: Check for new analysis summary flag in tests.The test verifies the correct passing of the
--new-analysis-summaryflag. Ensure that this logic is consistent with the code changes and accurately reflects the intended behavior.
529-529: Enhance error reporting in tests.The test captures and reports detailed error messages for fatal internal errors. Ensure that this enhancement improves the robustness of the test suite.
551-558: Summarize autobuilder errors in tests.The test captures autobuilder errors and provides a summary. Ensure that this change enhances error reporting and aligns with the main codebase.
581-599: Recognize fatal internal errors in tests.The test ensures that fatal internal errors are recognized and reported. Verify that this logic is consistent with the error handling improvements in the codebase.
616-621: Avoid duplicate flags in tests.The test ensures that the
--overwriteflag is not duplicated. Verify that this behavior is consistent with the intended functionality and does not introduce issues.lib/config-utils.test.js (3)
767-784: Refactoring improves maintainability.The consolidation of test cases into a loop reduces redundancy and enhances readability while maintaining the original test logic.
785-790: Refactoring maintains test logic.The refactored loop structure preserves the original test intent and enhances code clarity.
791-801: Refactoring enhances readability.The use of a loop to consolidate test cases maintains the original logic and improves code maintainability.
lib/codeql.js (6)
66-78: Version constants updated for compatibility.The updates to
CODEQL_MINIMUM_VERSION,CODEQL_NEXT_MINIMUM_VERSION,GHES_VERSION_MOST_RECENTLY_DEPRECATED, andGHES_MOST_RECENT_DEPRECATION_DATEensure compatibility with the latest versions.
Line range hint
123-134: Improved reporting insetupCodeQL.The change from
toolsDownloadDurationMstotoolsDownloadStatusReportlikely provides more detailed status information.
Line range hint
255-290: Simplified parameter management indatabaseInitCluster.The removal of the
featuresparameter likely streamlines the function's interface.
Line range hint
468-511: Refined diagnostics handling indatabaseInterpretResults.The refined handling of diagnostics export improves the function's clarity and functionality.
284-286: Enhanced flexibility ingetCodeQLForCmd.The addition of
overwriteFlaglogic allows for dynamic selection of overwrite options, improving command execution flexibility.
33-36: Streamlined module API.The removal of exports like
getExtraOptionsand others likely reflects a refactoring to streamline the module's public API..github/workflows/__export-file-baseline-information.yml (2)
61-61: Kotlin setup enabled.The addition of
setup-kotlin: 'true'explicitly enables Kotlin setup in the workflow. Ensure that this change integrates smoothly with other steps and doesn't introduce conflicts.
87-87: Refined Swift condition for macOS.The condition for including Swift in the expected baseline languages now checks specifically for macOS. This change aligns with macOS compatibility requirements.
.github/workflows/__go-indirect-tracing-workaround-diagnostic.yml (3)
57-57: Kotlin setup enabled.The addition of
setup-kotlin: 'true'explicitly enables Kotlin setup in the workflow. Ensure that this change integrates smoothly with other steps and doesn't introduce conflicts.
Line range hint
20-20:
Streamlined version checks.The version check for
stable-20230403has been removed, focusing onstable-v2.13.5andstable-v2.14.6. Ensure that this change aligns with the intended workflow requirements.
12-12: Removed Kotlin-related environment variable.The removal of
CODEQL_EXTRACTOR_JAVA_AGENT_DISABLE_KOTLINsuggests a change in Kotlin handling. Ensure that this change aligns with the intended workflow requirements and doesn't introduce issues.
| DocUrl["SCANNING_ON_PUSH"] = "https://docs.github.com/en/code-security/code-scanning/creating-an-advanced-setup-for-code-scanning/customizing-your-advanced-setup-for-code-scanning#scanning-on-push"; | ||
| DocUrl["SPECIFY_BUILD_STEPS_MANUALLY"] = "https://docs.github.com/en/code-security/code-scanning/creating-an-advanced-setup-for-code-scanning/codeql-code-scanning-for-compiled-languages#about-specifying-build-steps-manually"; | ||
| DocUrl["TRACK_CODE_SCANNING_ALERTS_ACROSS_RUNS"] = "https://docs.github.com/en/enterprise-cloud@latest/code-security/code-scanning/integrating-with-code-scanning/sarif-support-for-code-scanning#providing-data-to-track-code-scanning-alerts-across-runs"; | ||
| })(DocUrl || (exports.DocUrl = DocUrl = {})); |
There was a problem hiding this comment.
Refactor to avoid assignment within an expression.
Assignments within expressions can be confusing. Consider separating the assignment from the expression.
-})(DocUrl || (exports.DocUrl = DocUrl = {}));
+})(DocUrl || (exports.DocUrl = (DocUrl = {})));Committable suggestion was skipped due to low confidence.
Tools
Biome
[error] 15-15: The assignment should not be in an expression.
The use of assignments in expressions is confusing.
Expressions are often considered as side-effect free.(lint/suspicious/noAssignInExpressions)
[error] 15-15: The assignment should not be in an expression.
The use of assignments in expressions is confusing.
Expressions are often considered as side-effect free.(lint/suspicious/noAssignInExpressions)
| @@ -0,0 +1,16 @@ | |||
| "use strict"; | |||
There was a problem hiding this comment.
Remove redundant "use strict" directive.
In ES6 modules, the "use strict" directive is unnecessary because modules are always in strict mode.
-"use strict";Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| "use strict"; |
Tools
Biome
[error] 1-1: Redundant use strict directive.
The entire contents of JavaScript modules are automatically in strict mode, with no statement needed to initiate it.
Safe fix: Remove the redundant use strict directive.(lint/suspicious/noRedundantUseStrict)
lib/tools-features.js
Outdated
| exports.ToolsFeature = void 0; | ||
| exports.isSupportedToolsFeature = isSupportedToolsFeature; |
There was a problem hiding this comment.
Reorder exports for clarity.
The export statement for isSupportedToolsFeature is now placed after its definition. This reordering enhances readability by aligning the export with its definition.
lib/start-proxy-action-post.js
Outdated
| o["default"] = v; | ||
| }); | ||
| var __importStar = (this && this.__importStar) || function (mod) { | ||
| if (mod && mod.__esModule) return mod; |
There was a problem hiding this comment.
Consider using optional chaining for improved readability.
Using optional chaining can make the code more concise and readable.
- if ((config && config.debugMode) || core.isDebug()) {
+ if ((config?.debugMode) || core.isDebug()) {Also applies to: 47-47
Tools
Biome
[error] 19-19: Change to an optional chain.
Unsafe fix: Change to an optional chain.
(lint/complexity/useOptionalChain)
| @@ -0,0 +1,56 @@ | |||
| "use strict"; | |||
There was a problem hiding this comment.
Remove redundant "use strict" directive.
JavaScript modules are in strict mode by default, so this directive is unnecessary.
- "use strict";Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| "use strict"; |
Tools
Biome
[error] 1-1: Redundant use strict directive.
The entire contents of JavaScript modules are automatically in strict mode, with no statement needed to initiate it.
Safe fix: Remove the redundant use strict directive.(lint/suspicious/noRedundantUseStrict)
| @@ -138,6 +139,11 @@ var CliConfigErrorCategory; | |||
| * would like to categorize an error as a configuration error or not. | |||
| */ | |||
| exports.cliErrorsConfig = { | |||
| [CliConfigErrorCategory.AutobuildError]: { | |||
| cliErrorMessageCandidates: [ | |||
| new RegExp("We were unable to automatically build your code"), | |||
There was a problem hiding this comment.
Use regex literal instead of constructor.
Regular expression literals are preferred over the RegExp constructor for simplicity and better static analysis.
- new RegExp("We were unable to automatically build your code"),
+ /We were unable to automatically build your code/,Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| new RegExp("We were unable to automatically build your code"), | |
| /We were unable to automatically build your code/, |
Tools
Biome
[error] 144-144: Use a regular expression literal instead of the RegExp constructor.
Regular expression literals avoid some escaping required in a string literal, and are easier to analyze statically.
Safe fix: Use a literal notation instead.(lint/complexity/useRegexLiterals)
| @@ -0,0 +1,152 @@ | |||
| "use strict"; | |||
There was a problem hiding this comment.
Remove the redundant 'use strict' directive.
The 'use strict' directive is unnecessary in JavaScript modules as they are in strict mode by default.
- "use strict";Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| "use strict"; |
Tools
Biome
[error] 1-1: Redundant use strict directive.
The entire contents of JavaScript modules are automatically in strict mode, with no statement needed to initiate it.
Safe fix: Remove the redundant use strict directive.(lint/suspicious/noRedundantUseStrict)
There was a problem hiding this comment.
Actionable comments posted: 0
Outside diff range, codebase verification and nitpick comments (2)
CHANGELOG.md (2)
11-11: Use en dashes for date ranges.Consider using en dashes (–) instead of hyphens (-) for date ranges to improve readability and adhere to typographical standards.
- ## 3.26.0 - 06 Aug 2024 + ## 3.26.0 – 06 Aug 2024 - ## 3.25.15 - 26 Jul 2024 + ## 3.25.15 – 26 Jul 2024 - ## 3.25.14 - 25 Jul 2024 + ## 3.25.14 – 25 Jul 2024 - ## 3.25.13 - 19 Jul 2024 + ## 3.25.13 – 19 Jul 2024 - ## 3.25.12 - 12 Jul 2024 + ## 3.25.12 – 12 Jul 2024 - ## 3.25.11 - 28 Jun 2024 + ## 3.25.11 – 28 Jun 2024 - ## 3.25.10 - 13 Jun 2024 + ## 3.25.10 – 13 Jun 2024 - ## 3.25.9 - 12 Jun 2024 + ## 3.25.9 – 12 Jun 2024 - ## 3.25.8 - 04 Jun 2024 + ## 3.25.8 – 04 Jun 2024 - ## 3.25.7 - 31 May 2024 + ## 3.25.7 – 31 May 2024Also applies to: 16-16, 20-20, 24-24, 31-31, 36-36, 41-41, 45-45, 50-50, 54-54
Tools
LanguageTool
[typographical] ~11-~11: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2417) ## 3.26.0 - 06 Aug 2024 - Deprecation: Swift anal...(DASH_RULE)
22-22: Add a comma for clarity.Consider adding a comma after "production" for better readability.
- Do not use this in production as it is part of an internal experiment and subject to change at any time. + Do not use this in production, as it is part of an internal experiment and subject to change at any time.Tools
LanguageTool
[uncategorized] ~22-~22: Possible missing comma found.
Context: .../dependabot-action). Do not use this in production as it is part of an internal experiment...(AI_HYDRA_LEO_MISSING_COMMA)
Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Files ignored due to path filters (7)
node_modules/@eslint/js/package.jsonis excluded by!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/member-ordering.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/member-ordering.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/rules/naming-convention.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/naming-convention.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/rules/no-floating-promises.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/no-floating-promises.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.map
Files selected for processing (2)
- CHANGELOG.md (1 hunks)
- lib/defaults.json (1 hunks)
Files skipped from review due to trivial changes (1)
- lib/defaults.json
Additional context used
LanguageTool
CHANGELOG.md
[typographical] ~11-~11: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2417) ## 3.26.0 - 06 Aug 2024 - Deprecation: Swift anal...(DASH_RULE)
[typographical] ~16-~16: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2408) ## 3.25.15 - 26 Jul 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~20-~20: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2385) ## 3.25.14 - 25 Jul 2024 - Experimental: add a new `...(DASH_RULE)
[uncategorized] ~22-~22: Possible missing comma found.
Context: .../dependabot-action). Do not use this in production as it is part of an internal experiment...(AI_HYDRA_LEO_MISSING_COMMA)
[typographical] ~24-~24: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2376) ## 3.25.13 - 19 Jul 2024 - Addcodeql-versionto o...(DASH_RULE)
[typographical] ~31-~31: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...ersion of the CodeQL Action. ## 3.25.12 - 12 Jul 2024 - Improve the reliability a...(DASH_RULE)
[typographical] ~36-~36: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2364) ## 3.25.11 - 28 Jun 2024 - Avoid failing the workflo...(DASH_RULE)
[typographical] ~41-~41: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2352) ## 3.25.10 - 13 Jun 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~45-~45: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2327) ## 3.25.9 - 12 Jun 2024 - Avoid failing database cr...(DASH_RULE)
[typographical] ~50-~50: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2332) ## 3.25.8 - 04 Jun 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~54-~54: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2321) ## 3.25.7 - 31 May 2024 - We are rolling out a feat...(DASH_RULE)
There was a problem hiding this comment.
Actionable comments posted: 0
Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Files ignored due to path filters (1)
lib/init-action.js.mapis excluded by!**/*.map
Files selected for processing (1)
- lib/init-action.js (13 hunks)
Additional comments not posted (4)
lib/init-action.js (4)
Line range hint
47-116:
Enhancement to status reporting mechanism.The changes to the
sendCompletedStatusReportfunction enhance the reporting mechanism by providing more detailed information through thetoolsDownloadStatusReportobject and additional fields likepacks,query_filters, andregistries. Ensure that these changes are correctly integrated and that any dependent code is updated accordingly.
133-133: Consistent replacement oftoolsDownloadDurationMs.The variable
toolsDownloadDurationMshas been consistently replaced withtoolsDownloadStatusReport. Ensure that this change is reflected throughout the codebase and that the new variable is used correctly.
208-232: Updated logic for Go and Swift analysis.The logic for handling Go binaries and Swift analysis on Ubuntu runners has been updated. These changes ensure compatibility with current platform support and address specific configuration needs. Verify that these updates are correctly implemented and that they do not introduce any issues.
Line range hint
296-346:
Environment variable settings based on CodeQL version.The logic for setting environment variables based on CodeQL version checks is correctly implemented. This ensures that the appropriate features are enabled or disabled based on the version in use. Verify that these settings align with the intended functionality and do not cause any unintended side effects.
There was a problem hiding this comment.
Actionable comments posted: 0
Outside diff range, codebase verification and nitpick comments (1)
README.md (1)
38-38: Consider improving adjective order for clarity.The sentence "We typically release new minor versions of the CodeQL Action and Bundle..." can be improved by adjusting the adjective order for better readability.
- We typically release new minor versions of the CodeQL Action and Bundle when a new minor version of GitHub Enterprise Server (GHES) is released. + We typically release minor new versions of the CodeQL Action and Bundle when a new minor version of GitHub Enterprise Server (GHES) is released.Tools
LanguageTool
[style] ~38-~38: This is not the usual sequence for adjectives that have no special emphasis.
Context: ...Enterprise Server We typically release new minor versions of the CodeQL Action and Bundl...(EN_ADJ_ORDER)
[style] ~38-~38: This is not the usual sequence for adjectives that have no special emphasis.
Context: ... of the CodeQL Action and Bundle when a new minor version of GitHub Enterprise Server (GH...(EN_ADJ_ORDER)
Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Files selected for processing (1)
- README.md (1 hunks)
Additional context used
LanguageTool
README.md
[style] ~38-~38: This is not the usual sequence for adjectives that have no special emphasis.
Context: ...Enterprise Server We typically release new minor versions of the CodeQL Action and Bundl...(EN_ADJ_ORDER)
[style] ~38-~38: This is not the usual sequence for adjectives that have no special emphasis.
Context: ... of the CodeQL Action and Bundle when a new minor version of GitHub Enterprise Server (GH...(EN_ADJ_ORDER)
Additional comments not posted (2)
README.md (2)
36-40: Terminology update approved. Verify consistency across the document.The changes from "CLI" to "Bundle" are consistent with the updated terminology. Ensure that all references to "CLI" have been updated to "Bundle" throughout the document.
Tools
LanguageTool
[style] ~38-~38: This is not the usual sequence for adjectives that have no special emphasis.
Context: ...Enterprise Server We typically release new minor versions of the CodeQL Action and Bundl...(EN_ADJ_ORDER)
[style] ~38-~38: This is not the usual sequence for adjectives that have no special emphasis.
Context: ... of the CodeQL Action and Bundle when a new minor version of GitHub Enterprise Server (GH...(EN_ADJ_ORDER)
43-47: Version updates approved. Verify version consistency.The table updates align with the latest recommendations. Ensure that the version numbers are accurate and consistent with the latest releases.
There was a problem hiding this comment.
Actionable comments posted: 0
Outside diff range, codebase verification and nitpick comments (11)
CHANGELOG.md (11)
11-11: Use an en dash for date ranges.Consider using an en dash for date ranges to improve readability.
- ## 3.26.1 - 13 Aug 2024 + ## 3.26.1 – 13 Aug 2024Tools
LanguageTool
[typographical] ~11-~11: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2417) ## 3.26.1 - 13 Aug 2024 No user facing changes. ##...(DASH_RULE)
13-13: Consider using a hyphen for compound adjectives.If "user facing" is intended as a compound adjective, use a hyphen.
- No user facing changes. + No user-facing changes.Tools
LanguageTool
[uncategorized] ~13-~13: If this is a compound adjective that modifies the following noun, use a hyphen.
Context: ...pull/2417) ## 3.26.1 - 13 Aug 2024 No user facing changes. ## 3.26.0 - 06 Aug 2024 - _D...(EN_COMPOUND_ADJECTIVE_INTERNAL)
15-15: Use an en dash for date ranges.Consider using an en dash for date ranges to improve readability.
- ## 3.26.0 - 06 Aug 2024 + ## 3.26.0 – 06 Aug 2024Tools
LanguageTool
[typographical] ~15-~15: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...2024 No user facing changes. ## 3.26.0 - 06 Aug 2024 - Deprecation: Swift anal...(DASH_RULE)
20-20: Use an en dash for date ranges.Consider using an en dash for date ranges to improve readability.
- ## 3.25.15 - 26 Jul 2024 + ## 3.25.15 – 26 Jul 2024Tools
LanguageTool
[typographical] ~20-~20: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2408) ## 3.25.15 - 26 Jul 2024 - Update default CodeQL bun...(DASH_RULE)
24-24: Use an en dash for date ranges.Consider using an en dash for date ranges to improve readability.
- ## 3.25.14 - 25 Jul 2024 + ## 3.25.14 – 25 Jul 2024Tools
LanguageTool
[typographical] ~24-~24: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2385) ## 3.25.14 - 25 Jul 2024 - Experimental: add a new `...(DASH_RULE)
28-28: Use an en dash for date ranges.Consider using an en dash for date ranges to improve readability.
- ## 3.25.13 - 19 Jul 2024 + ## 3.25.13 – 19 Jul 2024Tools
LanguageTool
[typographical] ~28-~28: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2376) ## 3.25.13 - 19 Jul 2024 - Addcodeql-versionto o...(DASH_RULE)
35-35: Use an en dash for date ranges.Consider using an en dash for date ranges to improve readability.
- ## 3.25.12 - 12 Jul 2024 + ## 3.25.12 – 12 Jul 2024Tools
LanguageTool
[typographical] ~35-~35: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...ersion of the CodeQL Action. ## 3.25.12 - 12 Jul 2024 - Improve the reliability a...(DASH_RULE)
40-40: Use an en dash for date ranges.Consider using an en dash for date ranges to improve readability.
- ## 3.25.11 - 28 Jun 2024 + ## 3.25.11 – 28 Jun 2024Tools
LanguageTool
[typographical] ~40-~40: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2364) ## 3.25.11 - 28 Jun 2024 - Avoid failing the workflo...(DASH_RULE)
45-45: Use an en dash for date ranges.Consider using an en dash for date ranges to improve readability.
- ## 3.25.10 - 13 Jun 2024 + ## 3.25.10 – 13 Jun 2024Tools
LanguageTool
[typographical] ~45-~45: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2352) ## 3.25.10 - 13 Jun 2024 - Update default CodeQL bun...(DASH_RULE)
49-49: Use an en dash for date ranges.Consider using an en dash for date ranges to improve readability.
- ## 3.25.9 - 12 Jun 2024 + ## 3.25.9 – 12 Jun 2024Tools
LanguageTool
[typographical] ~49-~49: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2327) ## 3.25.9 - 12 Jun 2024 - Avoid failing database cr...(DASH_RULE)
54-54: Use an en dash for date ranges.Consider using an en dash for date ranges to improve readability.
- ## 3.25.8 - 04 Jun 2024 + ## 3.25.8 – 04 Jun 2024Tools
LanguageTool
[typographical] ~54-~54: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2332) ## 3.25.8 - 04 Jun 2024 - Update default CodeQL bun...(DASH_RULE)
Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Files selected for processing (1)
- CHANGELOG.md (1 hunks)
Additional context used
LanguageTool
CHANGELOG.md
[typographical] ~11-~11: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2417) ## 3.26.1 - 13 Aug 2024 No user facing changes. ##...(DASH_RULE)
[uncategorized] ~13-~13: If this is a compound adjective that modifies the following noun, use a hyphen.
Context: ...pull/2417) ## 3.26.1 - 13 Aug 2024 No user facing changes. ## 3.26.0 - 06 Aug 2024 - _D...(EN_COMPOUND_ADJECTIVE_INTERNAL)
[typographical] ~15-~15: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...2024 No user facing changes. ## 3.26.0 - 06 Aug 2024 - Deprecation: Swift anal...(DASH_RULE)
[typographical] ~20-~20: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2408) ## 3.25.15 - 26 Jul 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~24-~24: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2385) ## 3.25.14 - 25 Jul 2024 - Experimental: add a new `...(DASH_RULE)
[typographical] ~28-~28: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2376) ## 3.25.13 - 19 Jul 2024 - Addcodeql-versionto o...(DASH_RULE)
[typographical] ~35-~35: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...ersion of the CodeQL Action. ## 3.25.12 - 12 Jul 2024 - Improve the reliability a...(DASH_RULE)
[typographical] ~40-~40: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2364) ## 3.25.11 - 28 Jun 2024 - Avoid failing the workflo...(DASH_RULE)
[typographical] ~45-~45: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2352) ## 3.25.10 - 13 Jun 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~49-~49: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2327) ## 3.25.9 - 12 Jun 2024 - Avoid failing database cr...(DASH_RULE)
[typographical] ~54-~54: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2332) ## 3.25.8 - 04 Jun 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~58-~58: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2321) ## 3.25.7 - 31 May 2024 - We are rolling out a feat...(DASH_RULE)
There was a problem hiding this comment.
Actionable comments posted: 0
Outside diff range, codebase verification and nitpick comments (14)
CHANGELOG.md (14)
9-9: Consider using a hyphen for compound adjectives.In "user facing changes," if this is a compound adjective, use a hyphen: "user-facing changes."
- No user facing changes. + No user-facing changes.Tools
LanguageTool
[uncategorized] ~9-~9: If this is a compound adjective that modifies the following noun, use a hyphen.
Context: ...h version numbers. ## [UNRELEASED] No user facing changes. ## 3.26.2 - 14 Aug 2024 - Up...(EN_COMPOUND_ADJECTIVE_INTERNAL)
11-11: Use an en dash for date ranges.For consistency and readability, consider using an en dash for date ranges: "14 Aug 2024."
- ## 3.26.2 - 14 Aug 2024 + ## 3.26.2 – 14 Aug 2024Tools
LanguageTool
[typographical] ~11-~11: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...SED] No user facing changes. ## 3.26.2 - 14 Aug 2024 - Update default CodeQL bun...(DASH_RULE)
15-15: Use an en dash for date ranges.For consistency and readability, consider using an en dash for date ranges: "13 Aug 2024."
- ## 3.26.1 - 13 Aug 2024 + ## 3.26.1 – 13 Aug 2024Tools
LanguageTool
[typographical] ~15-~15: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2417) ## 3.26.1 - 13 Aug 2024 No user facing changes. ##...(DASH_RULE)
17-17: Consider using a hyphen for compound adjectives.In "user facing changes," if this is a compound adjective, use a hyphen: "user-facing changes."
- No user facing changes. + No user-facing changes.Tools
LanguageTool
[uncategorized] ~17-~17: If this is a compound adjective that modifies the following noun, use a hyphen.
Context: ...pull/2417) ## 3.26.1 - 13 Aug 2024 No user facing changes. ## 3.26.0 - 06 Aug 2024 - _D...(EN_COMPOUND_ADJECTIVE_INTERNAL)
19-19: Use an en dash for date ranges.For consistency and readability, consider using an en dash for date ranges: "06 Aug 2024."
- ## 3.26.0 - 06 Aug 2024 + ## 3.26.0 – 06 Aug 2024Tools
LanguageTool
[typographical] ~19-~19: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...2024 No user facing changes. ## 3.26.0 - 06 Aug 2024 - Deprecation: Swift anal...(DASH_RULE)
24-24: Use an en dash for date ranges.For consistency and readability, consider using an en dash for date ranges: "26 Jul 2024."
- ## 3.25.15 - 26 Jul 2024 + ## 3.25.15 – 26 Jul 2024Tools
LanguageTool
[typographical] ~24-~24: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2408) ## 3.25.15 - 26 Jul 2024 - Update default CodeQL bun...(DASH_RULE)
28-28: Use an en dash for date ranges.For consistency and readability, consider using an en dash for date ranges: "25 Jul 2024."
- ## 3.25.14 - 25 Jul 2024 + ## 3.25.14 – 25 Jul 2024Tools
LanguageTool
[typographical] ~28-~28: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2385) ## 3.25.14 - 25 Jul 2024 - Experimental: add a new `...(DASH_RULE)
32-32: Use an en dash for date ranges.For consistency and readability, consider using an en dash for date ranges: "19 Jul 2024."
- ## 3.25.13 - 19 Jul 2024 + ## 3.25.13 – 19 Jul 2024Tools
LanguageTool
[typographical] ~32-~32: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2376) ## 3.25.13 - 19 Jul 2024 - Addcodeql-versionto o...(DASH_RULE)
39-39: Use an en dash for date ranges.For consistency and readability, consider using an en dash for date ranges: "12 Jul 2024."
- ## 3.25.12 - 12 Jul 2024 + ## 3.25.12 – 12 Jul 2024Tools
LanguageTool
[typographical] ~39-~39: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...ersion of the CodeQL Action. ## 3.25.12 - 12 Jul 2024 - Improve the reliability a...(DASH_RULE)
44-44: Use an en dash for date ranges.For consistency and readability, consider using an en dash for date ranges: "28 Jun 2024."
- ## 3.25.11 - 28 Jun 2024 + ## 3.25.11 – 28 Jun 2024Tools
LanguageTool
[typographical] ~44-~44: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2364) ## 3.25.11 - 28 Jun 2024 - Avoid failing the workflo...(DASH_RULE)
49-49: Use an en dash for date ranges.For consistency and readability, consider using an en dash for date ranges: "13 Jun 2024."
- ## 3.25.10 - 13 Jun 2024 + ## 3.25.10 – 13 Jun 2024Tools
LanguageTool
[typographical] ~49-~49: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2352) ## 3.25.10 - 13 Jun 2024 - Update default CodeQL bun...(DASH_RULE)
53-53: Use an en dash for date ranges.For consistency and readability, consider using an en dash for date ranges: "12 Jun 2024."
- ## 3.25.9 - 12 Jun 2024 + ## 3.25.9 – 12 Jun 2024Tools
LanguageTool
[typographical] ~53-~53: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2327) ## 3.25.9 - 12 Jun 2024 - Avoid failing database cr...(DASH_RULE)
58-58: Use an en dash for date ranges.For consistency and readability, consider using an en dash for date ranges: "04 Jun 2024."
- ## 3.25.8 - 04 Jun 2024 + ## 3.25.8 – 04 Jun 2024Tools
LanguageTool
[typographical] ~58-~58: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2332) ## 3.25.8 - 04 Jun 2024 - Update default CodeQL bun...(DASH_RULE)
62-62: Use an en dash for date ranges.For consistency and readability, consider using an en dash for date ranges: "31 May 2024."
- ## 3.25.7 - 31 May 2024 + ## 3.25.7 – 31 May 2024Tools
LanguageTool
[typographical] ~62-~62: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2321) ## 3.25.7 - 31 May 2024 - We are rolling out a feat...(DASH_RULE)
Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Files selected for processing (1)
- CHANGELOG.md (1 hunks)
Additional context used
LanguageTool
CHANGELOG.md
[uncategorized] ~9-~9: If this is a compound adjective that modifies the following noun, use a hyphen.
Context: ...h version numbers. ## [UNRELEASED] No user facing changes. ## 3.26.2 - 14 Aug 2024 - Up...(EN_COMPOUND_ADJECTIVE_INTERNAL)
[typographical] ~11-~11: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...SED] No user facing changes. ## 3.26.2 - 14 Aug 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~15-~15: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2417) ## 3.26.1 - 13 Aug 2024 No user facing changes. ##...(DASH_RULE)
[uncategorized] ~17-~17: If this is a compound adjective that modifies the following noun, use a hyphen.
Context: ...pull/2417) ## 3.26.1 - 13 Aug 2024 No user facing changes. ## 3.26.0 - 06 Aug 2024 - _D...(EN_COMPOUND_ADJECTIVE_INTERNAL)
[typographical] ~19-~19: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...2024 No user facing changes. ## 3.26.0 - 06 Aug 2024 - Deprecation: Swift anal...(DASH_RULE)
[typographical] ~24-~24: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2408) ## 3.25.15 - 26 Jul 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~28-~28: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2385) ## 3.25.14 - 25 Jul 2024 - Experimental: add a new `...(DASH_RULE)
[typographical] ~32-~32: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2376) ## 3.25.13 - 19 Jul 2024 - Addcodeql-versionto o...(DASH_RULE)
[typographical] ~39-~39: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...ersion of the CodeQL Action. ## 3.25.12 - 12 Jul 2024 - Improve the reliability a...(DASH_RULE)
[typographical] ~44-~44: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2364) ## 3.25.11 - 28 Jun 2024 - Avoid failing the workflo...(DASH_RULE)
[typographical] ~49-~49: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2352) ## 3.25.10 - 13 Jun 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~53-~53: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2327) ## 3.25.9 - 12 Jun 2024 - Avoid failing database cr...(DASH_RULE)
[typographical] ~58-~58: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2332) ## 3.25.8 - 04 Jun 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~62-~62: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2321) ## 3.25.7 - 31 May 2024 - We are rolling out a feat...(DASH_RULE)
There was a problem hiding this comment.
Actionable comments posted: 0
Outside diff range, codebase verification and nitpick comments (11)
CHANGELOG.md (11)
11-11: Use an en dash for date ranges.Consider using an en dash for the date range to improve typographical consistency.
- ## 3.26.2 - 14 Aug 2024 + ## 3.26.2 – 14 Aug 2024Tools
LanguageTool
[typographical] ~11-~11: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2430) ## 3.26.2 - 14 Aug 2024 - Update default CodeQL bun...(DASH_RULE)
15-15: Use an en dash for date ranges.Consider using an en dash for the date range to improve typographical consistency.
- ## 3.26.1 - 13 Aug 2024 + ## 3.26.1 – 13 Aug 2024Tools
LanguageTool
[typographical] ~15-~15: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2417) ## 3.26.1 - 13 Aug 2024 No user facing changes. ##...(DASH_RULE)
19-19: Use an en dash for date ranges.Consider using an en dash for the date range to improve typographical consistency.
- ## 3.26.0 - 06 Aug 2024 + ## 3.26.0 – 06 Aug 2024Tools
LanguageTool
[typographical] ~19-~19: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...2024 No user facing changes. ## 3.26.0 - 06 Aug 2024 - Deprecation: Swift anal...(DASH_RULE)
24-24: Use an en dash for date ranges.Consider using an en dash for the date range to improve typographical consistency.
- ## 3.25.15 - 26 Jul 2024 + ## 3.25.15 – 26 Jul 2024Tools
LanguageTool
[typographical] ~24-~24: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2408) ## 3.25.15 - 26 Jul 2024 - Update default CodeQL bun...(DASH_RULE)
28-28: Use an en dash for date ranges.Consider using an en dash for the date range to improve typographical consistency.
- ## 3.25.14 - 25 Jul 2024 + ## 3.25.14 – 25 Jul 2024Tools
LanguageTool
[typographical] ~28-~28: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2385) ## 3.25.14 - 25 Jul 2024 - Experimental: add a new `...(DASH_RULE)
32-32: Use an en dash for date ranges.Consider using an en dash for the date range to improve typographical consistency.
- ## 3.25.13 - 19 Jul 2024 + ## 3.25.13 – 19 Jul 2024Tools
LanguageTool
[typographical] ~32-~32: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2376) ## 3.25.13 - 19 Jul 2024 - Addcodeql-versionto o...(DASH_RULE)
39-39: Use an en dash for date ranges.Consider using an en dash for the date range to improve typographical consistency.
- ## 3.25.12 - 12 Jul 2024 + ## 3.25.12 – 12 Jul 2024Tools
LanguageTool
[typographical] ~39-~39: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...ersion of the CodeQL Action. ## 3.25.12 - 12 Jul 2024 - Improve the reliability a...(DASH_RULE)
44-44: Use an en dash for date ranges.Consider using an en dash for the date range to improve typographical consistency.
- ## 3.25.11 - 28 Jun 2024 + ## 3.25.11 – 28 Jun 2024Tools
LanguageTool
[typographical] ~44-~44: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2364) ## 3.25.11 - 28 Jun 2024 - Avoid failing the workflo...(DASH_RULE)
49-49: Use an en dash for date ranges.Consider using an en dash for the date range to improve typographical consistency.
- ## 3.25.10 - 13 Jun 2024 + ## 3.25.10 – 13 Jun 2024Tools
LanguageTool
[typographical] ~49-~49: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2352) ## 3.25.10 - 13 Jun 2024 - Update default CodeQL bun...(DASH_RULE)
53-53: Use an en dash for date ranges.Consider using an en dash for the date range to improve typographical consistency.
- ## 3.25.9 - 12 Jun 2024 + ## 3.25.9 – 12 Jun 2024Tools
LanguageTool
[typographical] ~53-~53: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2327) ## 3.25.9 - 12 Jun 2024 - Avoid failing database cr...(DASH_RULE)
58-58: Use an en dash for date ranges.Consider using an en dash for the date range to improve typographical consistency.
- ## 3.25.8 - 04 Jun 2024 + ## 3.25.8 – 04 Jun 2024Tools
LanguageTool
[typographical] ~58-~58: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2332) ## 3.25.8 - 04 Jun 2024 - Update default CodeQL bun...(DASH_RULE)
Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Files ignored due to path filters (1)
lib/diagnostics.js.mapis excluded by!**/*.map
Files selected for processing (2)
- CHANGELOG.md (1 hunks)
- lib/diagnostics.js (7 hunks)
Files skipped from review as they are similar to previous changes (1)
- lib/diagnostics.js
Additional context used
LanguageTool
CHANGELOG.md
[typographical] ~11-~11: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2430) ## 3.26.2 - 14 Aug 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~15-~15: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2417) ## 3.26.1 - 13 Aug 2024 No user facing changes. ##...(DASH_RULE)
[uncategorized] ~17-~17: If this is a compound adjective that modifies the following noun, use a hyphen.
Context: ...pull/2417) ## 3.26.1 - 13 Aug 2024 No user facing changes. ## 3.26.0 - 06 Aug 2024 - _D...(EN_COMPOUND_ADJECTIVE_INTERNAL)
[typographical] ~19-~19: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...2024 No user facing changes. ## 3.26.0 - 06 Aug 2024 - Deprecation: Swift anal...(DASH_RULE)
[typographical] ~24-~24: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2408) ## 3.25.15 - 26 Jul 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~28-~28: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2385) ## 3.25.14 - 25 Jul 2024 - Experimental: add a new `...(DASH_RULE)
[typographical] ~32-~32: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2376) ## 3.25.13 - 19 Jul 2024 - Addcodeql-versionto o...(DASH_RULE)
[typographical] ~39-~39: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...ersion of the CodeQL Action. ## 3.25.12 - 12 Jul 2024 - Improve the reliability a...(DASH_RULE)
[typographical] ~44-~44: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2364) ## 3.25.11 - 28 Jun 2024 - Avoid failing the workflo...(DASH_RULE)
[typographical] ~49-~49: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2352) ## 3.25.10 - 13 Jun 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~53-~53: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2327) ## 3.25.9 - 12 Jun 2024 - Avoid failing database cr...(DASH_RULE)
[typographical] ~58-~58: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2332) ## 3.25.8 - 04 Jun 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~62-~62: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2321) ## 3.25.7 - 31 May 2024 - We are rolling out a feat...(DASH_RULE)
There was a problem hiding this comment.
Actionable comments posted: 0
Outside diff range, codebase verification and nitpick comments (2)
CHANGELOG.md (2)
9-9: Consider using a hyphen for compound adjectives.To improve clarity, consider using a hyphen in "user facing" to form "user-facing".
- No user facing changes. + No user-facing changes.Tools
LanguageTool
[uncategorized] ~9-~9: If this is a compound adjective that modifies the following noun, use a hyphen.
Context: ...h version numbers. ## [UNRELEASED] No user facing changes. ## 3.26.3 - 19 Aug 2024 - Fi...(EN_COMPOUND_ADJECTIVE_INTERNAL)
11-11: Consider using an en dash for date ranges.For consistency and typographical correctness, consider using an en dash for date ranges, e.g., "3.26.3 – 19 Aug 2024".
- ## 3.26.3 - 19 Aug 2024 + ## 3.26.3 – 19 Aug 2024Also applies to: 15-15, 19-19, 23-23, 28-28, 32-32, 36-36, 43-43, 48-48, 53-53, 57-57, 62-62, 66-66
Tools
LanguageTool
[typographical] ~11-~11: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...SED] No user facing changes. ## 3.26.3 - 19 Aug 2024 - Fix an issue where the Co...(DASH_RULE)
Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Files selected for processing (1)
- CHANGELOG.md (1 hunks)
Additional context used
LanguageTool
CHANGELOG.md
[uncategorized] ~9-~9: If this is a compound adjective that modifies the following noun, use a hyphen.
Context: ...h version numbers. ## [UNRELEASED] No user facing changes. ## 3.26.3 - 19 Aug 2024 - Fi...(EN_COMPOUND_ADJECTIVE_INTERNAL)
[typographical] ~11-~11: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...SED] No user facing changes. ## 3.26.3 - 19 Aug 2024 - Fix an issue where the Co...(DASH_RULE)
[typographical] ~15-~15: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2430) ## 3.26.2 - 14 Aug 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~19-~19: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2417) ## 3.26.1 - 13 Aug 2024 No user facing changes. ##...(DASH_RULE)
[uncategorized] ~21-~21: If this is a compound adjective that modifies the following noun, use a hyphen.
Context: ...pull/2417) ## 3.26.1 - 13 Aug 2024 No user facing changes. ## 3.26.0 - 06 Aug 2024 - _D...(EN_COMPOUND_ADJECTIVE_INTERNAL)
[typographical] ~23-~23: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...2024 No user facing changes. ## 3.26.0 - 06 Aug 2024 - Deprecation: Swift anal...(DASH_RULE)
[typographical] ~28-~28: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2408) ## 3.25.15 - 26 Jul 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~32-~32: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2385) ## 3.25.14 - 25 Jul 2024 - Experimental: add a new `...(DASH_RULE)
[typographical] ~36-~36: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2376) ## 3.25.13 - 19 Jul 2024 - Addcodeql-versionto o...(DASH_RULE)
[typographical] ~43-~43: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...ersion of the CodeQL Action. ## 3.25.12 - 12 Jul 2024 - Improve the reliability a...(DASH_RULE)
[typographical] ~48-~48: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2364) ## 3.25.11 - 28 Jun 2024 - Avoid failing the workflo...(DASH_RULE)
[typographical] ~53-~53: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2352) ## 3.25.10 - 13 Jun 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~57-~57: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2327) ## 3.25.9 - 12 Jun 2024 - Avoid failing database cr...(DASH_RULE)
[typographical] ~62-~62: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2332) ## 3.25.8 - 04 Jun 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~66-~66: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2321) ## 3.25.7 - 31 May 2024 - We are rolling out a feat...(DASH_RULE)
There was a problem hiding this comment.
Actionable comments posted: 0
Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Files ignored due to path filters (2)
lib/start-proxy-action-post.js.mapis excluded by!**/*.maplib/start-proxy-action.js.mapis excluded by!**/*.map
Files selected for processing (2)
- lib/start-proxy-action-post.js (1 hunks)
- lib/start-proxy-action.js (1 hunks)
Additional context used
Biome
lib/start-proxy-action-post.js
[error] 1-1: Redundant use strict directive.
The entire contents of JavaScript modules are automatically in strict mode, with no statement needed to initiate it.
Safe fix: Remove the redundant use strict directive.(lint/suspicious/noRedundantUseStrict)
[error] 19-19: Change to an optional chain.
Unsafe fix: Change to an optional chain.
(lint/complexity/useOptionalChain)
[error] 47-47: Change to an optional chain.
Unsafe fix: Change to an optional chain.
(lint/complexity/useOptionalChain)
lib/start-proxy-action.js
[error] 1-1: Redundant use strict directive.
The entire contents of JavaScript modules are automatically in strict mode, with no statement needed to initiate it.
Safe fix: Remove the redundant use strict directive.(lint/suspicious/noRedundantUseStrict)
[error] 19-19: Change to an optional chain.
Unsafe fix: Change to an optional chain.
(lint/complexity/useOptionalChain)
Additional comments not posted (8)
lib/start-proxy-action-post.js (3)
1-1: Remove the redundant "use strict" directive.JavaScript modules are in strict mode by default, so this directive is unnecessary.
Tools
Biome
[error] 1-1: Redundant use strict directive.
The entire contents of JavaScript modules are automatically in strict mode, with no statement needed to initiate it.
Safe fix: Remove the redundant use strict directive.(lint/suspicious/noRedundantUseStrict)
19-19: Consider using optional chaining for improved readability.Using optional chaining can make the code more concise and readable.
- if ((config && config.debugMode) || core.isDebug()) { + if ((config?.debugMode) || core.isDebug()) {Also applies to: 47-47
Tools
Biome
[error] 19-19: Change to an optional chain.
Unsafe fix: Change to an optional chain.
(lint/complexity/useOptionalChain)
36-64: LGTM!The
runWrapperfunction is well-structured and handles errors appropriately.Tools
Biome
[error] 47-47: Change to an optional chain.
Unsafe fix: Change to an optional chain.
(lint/complexity/useOptionalChain)
lib/start-proxy-action.js (5)
1-1: Remove the redundant "use strict" directive.JavaScript modules are in strict mode by default, so this directive is unnecessary.
Tools
Biome
[error] 1-1: Redundant use strict directive.
The entire contents of JavaScript modules are automatically in strict mode, with no statement needed to initiate it.
Safe fix: Remove the redundant use strict directive.(lint/suspicious/noRedundantUseStrict)
66-80: LGTM!The
generateCertificateAuthorityfunction correctly implements certificate generation usingnode-forge.
104-147: LGTM!The
startProxyfunction is well-structured with appropriate error handling and retry logic.
151-183: LGTM!The
getCredentialsfunction correctly retrieves and validates credentials from action inputs.
186-195: LGTM!The
getProxyAuthfunction correctly handles optional input retrieval for proxy authentication.
There was a problem hiding this comment.
Actionable comments posted: 0
Outside diff range, codebase verification and nitpick comments (12)
CHANGELOG.md (12)
9-9: Correct the operating system name to "macOS".The correct spelling for Apple's operating system is "macOS".
- on MacOS ARM machines + on macOS ARM machinesTools
LanguageTool
[grammar] ~9-~9: The operating system from Apple is written “macOS”.
Context: ...m call used for telemetry would fail on MacOS ARM machines with System Integrity Prot...(MAC_OS)
11-11: Use an en dash for date ranges.For consistency and typographical correctness, use an en dash for date ranges.
- ## 3.26.3 - 19 Aug 2024 + ## 3.26.3 – 19 Aug 2024Tools
LanguageTool
[typographical] ~11-~11: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2434) ## 3.26.3 - 19 Aug 2024 - Fix an issue where the Co...(DASH_RULE)
15-15: Use an en dash for date ranges.For consistency and typographical correctness, use an en dash for date ranges.
- ## 3.26.2 - 14 Aug 2024 + ## 3.26.2 – 14 Aug 2024Tools
LanguageTool
[typographical] ~15-~15: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2430) ## 3.26.2 - 14 Aug 2024 - Update default CodeQL bun...(DASH_RULE)
19-19: Use an en dash for date ranges.For consistency and typographical correctness, use an en dash for date ranges.
- ## 3.26.1 - 13 Aug 2024 + ## 3.26.1 – 13 Aug 2024Tools
LanguageTool
[typographical] ~19-~19: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2417) ## 3.26.1 - 13 Aug 2024 No user facing changes. ##...(DASH_RULE)
21-21: Hyphenate the compound adjective "user-facing".The phrase "user-facing" should be hyphenated as it is a compound adjective.
- No user facing changes. + No user-facing changes.Tools
LanguageTool
[uncategorized] ~21-~21: If this is a compound adjective that modifies the following noun, use a hyphen.
Context: ...pull/2417) ## 3.26.1 - 13 Aug 2024 No user facing changes. ## 3.26.0 - 06 Aug 2024 - _D...(EN_COMPOUND_ADJECTIVE_INTERNAL)
23-23: Use an en dash for date ranges.For consistency and typographical correctness, use an en dash for date ranges.
- ## 3.26.0 - 06 Aug 2024 + ## 3.26.0 – 06 Aug 2024Tools
LanguageTool
[typographical] ~23-~23: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...2024 No user facing changes. ## 3.26.0 - 06 Aug 2024 - Deprecation: Swift anal...(DASH_RULE)
28-28: Use an en dash for date ranges.For consistency and typographical correctness, use an en dash for date ranges.
- ## 3.25.15 - 26 Jul 2024 + ## 3.25.15 – 26 Jul 2024Tools
LanguageTool
[typographical] ~28-~28: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2408) ## 3.25.15 - 26 Jul 2024 - Update default CodeQL bun...(DASH_RULE)
32-32: Use an en dash for date ranges.For consistency and typographical correctness, use an en dash for date ranges.
- ## 3.25.14 - 25 Jul 2024 + ## 3.25.14 – 25 Jul 2024Tools
LanguageTool
[typographical] ~32-~32: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2385) ## 3.25.14 - 25 Jul 2024 - Experimental: add a new `...(DASH_RULE)
36-36: Use an en dash for date ranges.For consistency and typographical correctness, use an en dash for date ranges.
- ## 3.25.13 - 19 Jul 2024 + ## 3.25.13 – 19 Jul 2024Tools
LanguageTool
[typographical] ~36-~36: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2376) ## 3.25.13 - 19 Jul 2024 - Addcodeql-versionto o...(DASH_RULE)
43-43: Use an en dash for date ranges.For consistency and typographical correctness, use an en dash for date ranges.
- ## 3.25.12 - 12 Jul 2024 + ## 3.25.12 – 12 Jul 2024Tools
LanguageTool
[typographical] ~43-~43: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...ersion of the CodeQL Action. ## 3.25.12 - 12 Jul 2024 - Improve the reliability a...(DASH_RULE)
48-48: Use an en dash for date ranges.For consistency and typographical correctness, use an en dash for date ranges.
- ## 3.25.11 - 28 Jun 2024 + ## 3.25.11 – 28 Jun 2024Tools
LanguageTool
[typographical] ~48-~48: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2364) ## 3.25.11 - 28 Jun 2024 - Avoid failing the workflo...(DASH_RULE)
53-53: Use an en dash for date ranges.For consistency and typographical correctness, use an en dash for date ranges.
- ## 3.25.10 - 13 Jun 2024 + ## 3.25.10 – 13 Jun 2024Tools
LanguageTool
[typographical] ~53-~53: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2352) ## 3.25.10 - 13 Jun 2024 - Update default CodeQL bun...(DASH_RULE)
Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Files ignored due to path filters (7)
lib/analyze-action.js.mapis excluded by!**/*.maplib/init-action-post.js.mapis excluded by!**/*.maplib/init-action.js.mapis excluded by!**/*.maplib/init.js.mapis excluded by!**/*.maplib/resolve-environment-action.js.mapis excluded by!**/*.maplib/upload-sarif-action.js.mapis excluded by!**/*.maplib/util.js.mapis excluded by!**/*.map
Files selected for processing (8)
- CHANGELOG.md (1 hunks)
- lib/analyze-action.js (6 hunks)
- lib/init-action-post.js (1 hunks)
- lib/init-action.js (13 hunks)
- lib/init.js (4 hunks)
- lib/resolve-environment-action.js (2 hunks)
- lib/upload-sarif-action.js (3 hunks)
- lib/util.js (33 hunks)
Files skipped from review as they are similar to previous changes (2)
- lib/analyze-action.js
- lib/init.js
Additional context used
LanguageTool
CHANGELOG.md
[grammar] ~9-~9: The operating system from Apple is written “macOS”.
Context: ...m call used for telemetry would fail on MacOS ARM machines with System Integrity Prot...(MAC_OS)
[typographical] ~11-~11: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2434) ## 3.26.3 - 19 Aug 2024 - Fix an issue where the Co...(DASH_RULE)
[typographical] ~15-~15: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2430) ## 3.26.2 - 14 Aug 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~19-~19: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2417) ## 3.26.1 - 13 Aug 2024 No user facing changes. ##...(DASH_RULE)
[uncategorized] ~21-~21: If this is a compound adjective that modifies the following noun, use a hyphen.
Context: ...pull/2417) ## 3.26.1 - 13 Aug 2024 No user facing changes. ## 3.26.0 - 06 Aug 2024 - _D...(EN_COMPOUND_ADJECTIVE_INTERNAL)
[typographical] ~23-~23: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...2024 No user facing changes. ## 3.26.0 - 06 Aug 2024 - Deprecation: Swift anal...(DASH_RULE)
[typographical] ~28-~28: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2408) ## 3.25.15 - 26 Jul 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~32-~32: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2385) ## 3.25.14 - 25 Jul 2024 - Experimental: add a new `...(DASH_RULE)
[typographical] ~36-~36: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2376) ## 3.25.13 - 19 Jul 2024 - Addcodeql-versionto o...(DASH_RULE)
[typographical] ~43-~43: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...ersion of the CodeQL Action. ## 3.25.12 - 12 Jul 2024 - Improve the reliability a...(DASH_RULE)
[typographical] ~48-~48: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2364) ## 3.25.11 - 28 Jun 2024 - Avoid failing the workflo...(DASH_RULE)
[typographical] ~53-~53: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2352) ## 3.25.10 - 13 Jun 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~57-~57: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2327) ## 3.25.9 - 12 Jun 2024 - Avoid failing database cr...(DASH_RULE)
[typographical] ~62-~62: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2332) ## 3.25.8 - 04 Jun 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~66-~66: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2321) ## 3.25.7 - 31 May 2024 - We are rolling out a feat...(DASH_RULE)
Additional comments not posted (5)
lib/init-action-post.js (1)
62-62: LGTM! Verify thecheckDiskUsagefunction usage.The changes enhance logging by passing the
loggertocheckDiskUsage. Ensure all calls tocheckDiskUsageare updated accordingly.To verify the function usage, run the following script:
#!/bin/bash # Description: Verify all function calls to `checkDiskUsage` include the logger parameter. # Test: Search for the function usage. Expect: Only occurrences with the logger parameter. rg --type js -A 1 $'checkDiskUsage(logger)'Also applies to: 70-70
lib/resolve-environment-action.js (1)
41-41: LGTM! Verify thecheckDiskUsagefunction usage.The changes enhance logging by passing the
loggertocheckDiskUsage. Ensure all calls tocheckDiskUsageare updated accordingly.To verify the function usage, run the following script:
#!/bin/bash # Description: Verify all function calls to `checkDiskUsage` include the logger parameter. # Test: Search for the function usage. Expect: Only occurrences with the logger parameter. rg --type js -A 1 $'checkDiskUsage(logger)'Also applies to: 67-67, 74-74
lib/upload-sarif-action.js (1)
37-37: LGTM! Verify thecheckDiskUsagefunction usage andFeaturesinstance.The changes enhance logging by passing the
loggertocheckDiskUsageand introduce aFeaturesinstance for feature-aware processes. Ensure all calls tocheckDiskUsageare updated accordingly and verify the correct initialization and usage ofFeatures.To verify the function usage, run the following script:
#!/bin/bash # Description: Verify all function calls to `checkDiskUsage` include the logger parameter and check the initialization of `Features`. # Test: Search for the function usage. Expect: Only occurrences with the logger parameter. rg --type js -A 1 $'checkDiskUsage(logger)' # Test: Verify the initialization of `Features`. rg --type js -A 3 $'new feature_flags_1.Features'Also applies to: 54-54, 77-77
lib/init-action.js (1)
47-47: LGTM! Verify the new status report fields.The changes enhance the status reporting mechanism by incorporating more detailed configuration data. Ensure that the new fields are correctly populated and used throughout the codebase.
To verify the new status report fields, run the following script:
#!/bin/bash # Description: Verify the new fields in the status report are correctly populated and used. # Test: Search for the usage of new fields in the status report. rg --type js -A 5 $'initWithConfigStatusReport'Also applies to: 61-63, 86-103, 111-116, 133-133, 161-161, 201-201, 208-221, 229-232, 296-296, 332-332, 337-346, 356-366, 371-371, 377-377
lib/util.js (1)
29-70: LGTM! Verify the new utility functions andcheckDiskUsagemodifications.The restructuring of exports improves readability, and the new utility functions enhance functionality. The
checkDiskUsagefunction is streamlined for better performance. Ensure the new functions are correctly implemented and utilized.To verify the new utility functions and
checkDiskUsagemodifications, run the following script:#!/bin/bash # Description: Verify the new utility functions and modifications to `checkDiskUsage`. # Test: Search for the implementation and usage of `cloneObject`. rg --type js -A 2 $'function cloneObject' # Test: Search for the implementation and usage of `isSipEnabled`. rg --type js -A 2 $'async function isSipEnabled' # Test: Verify the modifications to `checkDiskUsage`. rg --type js -A 5 $'checkDiskUsage'Also applies to: 795-820, 868-870, 873-890
There was a problem hiding this comment.
Actionable comments posted: 0
Outside diff range, codebase verification and nitpick comments (2)
CHANGELOG.md (2)
9-9: Typographical improvement: Use "macOS" instead of "MacOS".Correct the capitalization for consistency with Apple's branding.
- Fix an issue where the disk usage system call used for telemetry would fail on MacOS ARM machines with System Integrity Protection disabled, and then surface a warning. + Fix an issue where the disk usage system call used for telemetry would fail on macOS ARM machines with System Integrity Protection disabled, and then surface a warning.
12-12: Typographical improvement: Use en dashes for date ranges.Consider using en dashes for numerical ranges or time ranges for consistency and clarity.
- ## 3.26.3 - 19 Aug 2024 + ## 3.26.3 – 19 Aug 2024Repeat this change for all similar instances.
Also applies to: 16-16, 20-20, 24-24, 29-29, 33-33, 37-37, 44-44, 49-49, 54-54, 58-58, 63-63, 67-67
Tools
LanguageTool
[typographical] ~12-~12: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2434) ## 3.26.3 - 19 Aug 2024 - Fix an issue where the Co...(DASH_RULE)
Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Files selected for processing (2)
- CHANGELOG.md (1 hunks)
- analyze/action.yml (1 hunks)
Additional context used
LanguageTool
CHANGELOG.md
[grammar] ~10-~10: The operating system from Apple is written “macOS”.
Context: ...m call used for telemetry would fail on MacOS ARM machines with System Integrity Prot...(MAC_OS)
[typographical] ~12-~12: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2434) ## 3.26.3 - 19 Aug 2024 - Fix an issue where the Co...(DASH_RULE)
[typographical] ~16-~16: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2430) ## 3.26.2 - 14 Aug 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~20-~20: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2417) ## 3.26.1 - 13 Aug 2024 No user facing changes. ##...(DASH_RULE)
[uncategorized] ~22-~22: If this is a compound adjective that modifies the following noun, use a hyphen.
Context: ...pull/2417) ## 3.26.1 - 13 Aug 2024 No user facing changes. ## 3.26.0 - 06 Aug 2024 - _D...(EN_COMPOUND_ADJECTIVE_INTERNAL)
[typographical] ~24-~24: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...2024 No user facing changes. ## 3.26.0 - 06 Aug 2024 - Deprecation: Swift anal...(DASH_RULE)
[typographical] ~29-~29: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2408) ## 3.25.15 - 26 Jul 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~33-~33: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2385) ## 3.25.14 - 25 Jul 2024 - Experimental: add a new `...(DASH_RULE)
[typographical] ~37-~37: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2376) ## 3.25.13 - 19 Jul 2024 - Addcodeql-versionto o...(DASH_RULE)
[typographical] ~44-~44: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...ersion of the CodeQL Action. ## 3.25.12 - 12 Jul 2024 - Improve the reliability a...(DASH_RULE)
[typographical] ~49-~49: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2364) ## 3.25.11 - 28 Jun 2024 - Avoid failing the workflo...(DASH_RULE)
[typographical] ~54-~54: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2352) ## 3.25.10 - 13 Jun 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~58-~58: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2327) ## 3.25.9 - 12 Jun 2024 - Avoid failing database cr...(DASH_RULE)
[typographical] ~63-~63: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2332) ## 3.25.8 - 04 Jun 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~67-~67: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2321) ## 3.25.7 - 31 May 2024 - We are rolling out a feat...(DASH_RULE)
Additional comments not posted (1)
analyze/action.yml (1)
37-41: Deprecation notice foradd-snippetsinput is clear and informative.The deprecation message provides a clear timeline and explanation for the removal of the
add-snippetsinput.
There was a problem hiding this comment.
Actionable comments posted: 0
Outside diff range, codebase verification and nitpick comments (15)
CHANGELOG.md (15)
9-9: Use a hyphen for compound adjectives.Change "user facing" to "user-facing" for clarity.
Apply this diff:
- No user facing changes. + No user-facing changes.Tools
LanguageTool
[uncategorized] ~9-~9: If this is a compound adjective that modifies the following noun, use a hyphen.
Context: ...h version numbers. ## [UNRELEASED] No user facing changes. ## 3.26.4 - 21 Aug 2024 - _D...(EN_COMPOUND_ADJECTIVE_INTERNAL)
11-11: Use an en dash for date ranges.Replace the hyphen with an en dash for the date range.
Apply this diff:
- ## 3.26.4 - 21 Aug 2024 + ## 3.26.4 – 21 Aug 2024Tools
LanguageTool
[typographical] ~11-~11: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...SED] No user facing changes. ## 3.26.4 - 21 Aug 2024 - Deprecation: The `add-s...(DASH_RULE)
14-14: Correct capitalization of "macOS".Change "MacOS" to "macOS" for correct capitalization.
Apply this diff:
- MacOS ARM machines + macOS ARM machinesTools
LanguageTool
[grammar] ~14-~14: The operating system from Apple is written “macOS”.
Context: ...m call used for telemetry would fail on MacOS ARM machines with System Integrity Prot...(MAC_OS)
16-16: Use an en dash for date ranges.Replace the hyphen with an en dash for the date range.
Apply this diff:
- ## 3.26.3 - 19 Aug 2024 + ## 3.26.3 – 19 Aug 2024Tools
LanguageTool
[typographical] ~16-~16: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2434) ## 3.26.3 - 19 Aug 2024 - Fix an issue where the Co...(DASH_RULE)
20-20: Use an en dash for date ranges.Replace the hyphen with an en dash for the date range.
Apply this diff:
- ## 3.26.2 - 14 Aug 2024 + ## 3.26.2 – 14 Aug 2024Tools
LanguageTool
[typographical] ~20-~20: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2430) ## 3.26.2 - 14 Aug 2024 - Update default CodeQL bun...(DASH_RULE)
24-24: Use an en dash for date ranges.Replace the hyphen with an en dash for the date range.
Apply this diff:
- ## 3.26.1 - 13 Aug 2024 + ## 3.26.1 – 13 Aug 2024Tools
LanguageTool
[typographical] ~24-~24: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2417) ## 3.26.1 - 13 Aug 2024 No user facing changes. ##...(DASH_RULE)
26-26: Use a hyphen for compound adjectives.Change "user facing" to "user-facing" for clarity.
Apply this diff:
- No user facing changes. + No user-facing changes.Tools
LanguageTool
[uncategorized] ~26-~26: If this is a compound adjective that modifies the following noun, use a hyphen.
Context: ...pull/2417) ## 3.26.1 - 13 Aug 2024 No user facing changes. ## 3.26.0 - 06 Aug 2024 - _D...(EN_COMPOUND_ADJECTIVE_INTERNAL)
28-28: Use an en dash for date ranges.Replace the hyphen with an en dash for the date range.
Apply this diff:
- ## 3.26.0 - 06 Aug 2024 + ## 3.26.0 – 06 Aug 2024Tools
LanguageTool
[typographical] ~28-~28: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...2024 No user facing changes. ## 3.26.0 - 06 Aug 2024 - Deprecation: Swift anal...(DASH_RULE)
33-33: Use an en dash for date ranges.Replace the hyphen with an en dash for the date range.
Apply this diff:
- ## 3.25.15 - 26 Jul 2024 + ## 3.25.15 – 26 Jul 2024Tools
LanguageTool
[typographical] ~33-~33: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2408) ## 3.25.15 - 26 Jul 2024 - Update default CodeQL bun...(DASH_RULE)
37-37: Use an en dash for date ranges.Replace the hyphen with an en dash for the date range.
Apply this diff:
- ## 3.25.14 - 25 Jul 2024 + ## 3.25.14 – 25 Jul 2024Tools
LanguageTool
[typographical] ~37-~37: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2385) ## 3.25.14 - 25 Jul 2024 - Experimental: add a new `...(DASH_RULE)
41-41: Use an en dash for date ranges.Replace the hyphen with an en dash for the date range.
Apply this diff:
- ## 3.25.13 - 19 Jul 2024 + ## 3.25.13 – 19 Jul 2024Tools
LanguageTool
[typographical] ~41-~41: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2376) ## 3.25.13 - 19 Jul 2024 - Addcodeql-versionto o...(DASH_RULE)
48-48: Use an en dash for date ranges.Replace the hyphen with an en dash for the date range.
Apply this diff:
- ## 3.25.12 - 12 Jul 2024 + ## 3.25.12 – 12 Jul 2024Tools
LanguageTool
[typographical] ~48-~48: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...ersion of the CodeQL Action. ## 3.25.12 - 12 Jul 2024 - Improve the reliability a...(DASH_RULE)
53-53: Use an en dash for date ranges.Replace the hyphen with an en dash for the date range.
Apply this diff:
- ## 3.25.11 - 28 Jun 2024 + ## 3.25.11 – 28 Jun 2024Tools
LanguageTool
[typographical] ~53-~53: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2364) ## 3.25.11 - 28 Jun 2024 - Avoid failing the workflo...(DASH_RULE)
58-58: Use an en dash for date ranges.Replace the hyphen with an en dash for the date range.
Apply this diff:
- ## 3.25.10 - 13 Jun 2024 + ## 3.25.10 – 13 Jun 2024Tools
LanguageTool
[typographical] ~58-~58: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2352) ## 3.25.10 - 13 Jun 2024 - Update default CodeQL bun...(DASH_RULE)
62-62: Use an en dash for date ranges.Replace the hyphen with an en dash for the date range.
Apply this diff:
- ## 3.25.9 - 12 Jun 2024 + ## 3.25.9 – 12 Jun 2024Tools
LanguageTool
[typographical] ~62-~62: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2327) ## 3.25.9 - 12 Jun 2024 - Avoid failing database cr...(DASH_RULE)
Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Files selected for processing (1)
- CHANGELOG.md (1 hunks)
Additional context used
LanguageTool
CHANGELOG.md
[uncategorized] ~9-~9: If this is a compound adjective that modifies the following noun, use a hyphen.
Context: ...h version numbers. ## [UNRELEASED] No user facing changes. ## 3.26.4 - 21 Aug 2024 - _D...(EN_COMPOUND_ADJECTIVE_INTERNAL)
[typographical] ~11-~11: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...SED] No user facing changes. ## 3.26.4 - 21 Aug 2024 - Deprecation: The `add-s...(DASH_RULE)
[grammar] ~14-~14: The operating system from Apple is written “macOS”.
Context: ...m call used for telemetry would fail on MacOS ARM machines with System Integrity Prot...(MAC_OS)
[typographical] ~16-~16: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2434) ## 3.26.3 - 19 Aug 2024 - Fix an issue where the Co...(DASH_RULE)
[typographical] ~20-~20: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2430) ## 3.26.2 - 14 Aug 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~24-~24: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2417) ## 3.26.1 - 13 Aug 2024 No user facing changes. ##...(DASH_RULE)
[uncategorized] ~26-~26: If this is a compound adjective that modifies the following noun, use a hyphen.
Context: ...pull/2417) ## 3.26.1 - 13 Aug 2024 No user facing changes. ## 3.26.0 - 06 Aug 2024 - _D...(EN_COMPOUND_ADJECTIVE_INTERNAL)
[typographical] ~28-~28: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...2024 No user facing changes. ## 3.26.0 - 06 Aug 2024 - Deprecation: Swift anal...(DASH_RULE)
[typographical] ~33-~33: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2408) ## 3.25.15 - 26 Jul 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~37-~37: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2385) ## 3.25.14 - 25 Jul 2024 - Experimental: add a new `...(DASH_RULE)
[typographical] ~41-~41: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2376) ## 3.25.13 - 19 Jul 2024 - Addcodeql-versionto o...(DASH_RULE)
[typographical] ~48-~48: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...ersion of the CodeQL Action. ## 3.25.12 - 12 Jul 2024 - Improve the reliability a...(DASH_RULE)
[typographical] ~53-~53: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2364) ## 3.25.11 - 28 Jun 2024 - Avoid failing the workflo...(DASH_RULE)
[typographical] ~58-~58: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2352) ## 3.25.10 - 13 Jun 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~62-~62: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2327) ## 3.25.9 - 12 Jun 2024 - Avoid failing database cr...(DASH_RULE)
[typographical] ~67-~67: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2332) ## 3.25.8 - 04 Jun 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~71-~71: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2321) ## 3.25.7 - 31 May 2024 - We are rolling out a feat...(DASH_RULE)
There was a problem hiding this comment.
Actionable comments posted: 0
Outside diff range, codebase verification and nitpick comments (10)
CHANGELOG.md (10)
9-9: Correct the operating system name to "macOS".The term "MacOS" should be corrected to "macOS" for consistency with Apple's branding.
Apply this diff to correct the name:
- Fix an issue where the `csrutil` system call used for telemetry would fail on MacOS ARM machines with System Integrity Protection disabled. + Fix an issue where the `csrutil` system call used for telemetry would fail on macOS ARM machines with System Integrity Protection disabled.Tools
LanguageTool
[grammar] ~9-~9: The operating system from Apple is written “macOS”.
Context: ...m call used for telemetry would fail on MacOS ARM machines with System Integrity Prot...(MAC_OS)
11-11: Use an en dash for date ranges.Replace the hyphen with an en dash for typographical correctness.
Apply this diff to correct the dash:
- ## 3.26.4 - 21 Aug 2024 + ## 3.26.4 – 21 Aug 2024Tools
LanguageTool
[typographical] ~11-~11: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2441) ## 3.26.4 - 21 Aug 2024 - Deprecation: The `add-s...(DASH_RULE)
14-14: Correct the operating system name to "macOS".The term "MacOS" should be corrected to "macOS" for consistency with Apple's branding.
Apply this diff to correct the name:
- Fix an issue where the disk usage system call used for telemetry would fail on MacOS ARM machines with System Integrity Protection disabled, and then surface a warning. + Fix an issue where the disk usage system call used for telemetry would fail on macOS ARM machines with System Integrity Protection disabled, and then surface a warning.Tools
LanguageTool
[grammar] ~14-~14: The operating system from Apple is written “macOS”.
Context: ...m call used for telemetry would fail on MacOS ARM machines with System Integrity Prot...(MAC_OS)
16-16: Use an en dash for date ranges.Replace the hyphen with an en dash for typographical correctness.
Apply this diff to correct the dash:
- ## 3.26.3 - 19 Aug 2024 + ## 3.26.3 – 19 Aug 2024Tools
LanguageTool
[typographical] ~16-~16: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2434) ## 3.26.3 - 19 Aug 2024 - Fix an issue where the Co...(DASH_RULE)
20-20: Use an en dash for date ranges.Replace the hyphen with an en dash for typographical correctness.
Apply this diff to correct the dash:
- ## 3.26.2 - 14 Aug 2024 + ## 3.26.2 – 14 Aug 2024Tools
LanguageTool
[typographical] ~20-~20: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2430) ## 3.26.2 - 14 Aug 2024 - Update default CodeQL bun...(DASH_RULE)
24-24: Use an en dash for date ranges.Replace the hyphen with an en dash for typographical correctness.
Apply this diff to correct the dash:
- ## 3.26.1 - 13 Aug 2024 + ## 3.26.1 – 13 Aug 2024Tools
LanguageTool
[typographical] ~24-~24: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2417) ## 3.26.1 - 13 Aug 2024 No user facing changes. ##...(DASH_RULE)
26-26: Hyphenate compound adjectives.The phrase "user facing" should be hyphenated as "user-facing" since it is a compound adjective.
Apply this diff to correct the phrase:
- No user facing changes. + No user-facing changes.Tools
LanguageTool
[uncategorized] ~26-~26: If this is a compound adjective that modifies the following noun, use a hyphen.
Context: ...pull/2417) ## 3.26.1 - 13 Aug 2024 No user facing changes. ## 3.26.0 - 06 Aug 2024 - _D...(EN_COMPOUND_ADJECTIVE_INTERNAL)
28-28: Use an en dash for date ranges.Replace the hyphen with an en dash for typographical correctness.
Apply this diff to correct the dash:
- ## 3.26.0 - 06 Aug 2024 + ## 3.26.0 – 06 Aug 2024Tools
LanguageTool
[typographical] ~28-~28: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...2024 No user facing changes. ## 3.26.0 - 06 Aug 2024 - Deprecation: Swift anal...(DASH_RULE)
33-33: Use an en dash for date ranges.Replace the hyphen with an en dash for typographical correctness.
Apply this diff to correct the dash:
- ## 3.25.15 - 26 Jul 2024 + ## 3.25.15 – 26 Jul 2024Tools
LanguageTool
[typographical] ~33-~33: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2408) ## 3.25.15 - 26 Jul 2024 - Update default CodeQL bun...(DASH_RULE)
37-37: Use an en dash for date ranges.Replace the hyphen with an en dash for typographical correctness.
Apply this diff to correct the dash:
- ## 3.25.14 - 25 Jul 2024 + ## 3.25.14 – 25 Jul 2024Tools
LanguageTool
[typographical] ~37-~37: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2385) ## 3.25.14 - 25 Jul 2024 - Experimental: add a new `...(DASH_RULE)
Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Files ignored due to path filters (3)
lib/environment.js.mapis excluded by!**/*.maplib/init-action.js.mapis excluded by!**/*.maplib/util.js.mapis excluded by!**/*.map
Files selected for processing (4)
- CHANGELOG.md (1 hunks)
- lib/environment.js (1 hunks)
- lib/init-action.js (13 hunks)
- lib/util.js (33 hunks)
Files skipped from review as they are similar to previous changes (1)
- lib/init-action.js
Additional context used
LanguageTool
CHANGELOG.md
[grammar] ~9-~9: The operating system from Apple is written “macOS”.
Context: ...m call used for telemetry would fail on MacOS ARM machines with System Integrity Prot...(MAC_OS)
[typographical] ~11-~11: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2441) ## 3.26.4 - 21 Aug 2024 - Deprecation: The `add-s...(DASH_RULE)
[grammar] ~14-~14: The operating system from Apple is written “macOS”.
Context: ...m call used for telemetry would fail on MacOS ARM machines with System Integrity Prot...(MAC_OS)
[typographical] ~16-~16: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2434) ## 3.26.3 - 19 Aug 2024 - Fix an issue where the Co...(DASH_RULE)
[typographical] ~20-~20: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2430) ## 3.26.2 - 14 Aug 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~24-~24: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2417) ## 3.26.1 - 13 Aug 2024 No user facing changes. ##...(DASH_RULE)
[uncategorized] ~26-~26: If this is a compound adjective that modifies the following noun, use a hyphen.
Context: ...pull/2417) ## 3.26.1 - 13 Aug 2024 No user facing changes. ## 3.26.0 - 06 Aug 2024 - _D...(EN_COMPOUND_ADJECTIVE_INTERNAL)
[typographical] ~28-~28: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...2024 No user facing changes. ## 3.26.0 - 06 Aug 2024 - Deprecation: Swift anal...(DASH_RULE)
[typographical] ~33-~33: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2408) ## 3.25.15 - 26 Jul 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~37-~37: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2385) ## 3.25.14 - 25 Jul 2024 - Experimental: add a new `...(DASH_RULE)
[typographical] ~41-~41: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2376) ## 3.25.13 - 19 Jul 2024 - Addcodeql-versionto o...(DASH_RULE)
[typographical] ~48-~48: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...ersion of the CodeQL Action. ## 3.25.12 - 12 Jul 2024 - Improve the reliability a...(DASH_RULE)
[typographical] ~53-~53: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2364) ## 3.25.11 - 28 Jun 2024 - Avoid failing the workflo...(DASH_RULE)
[typographical] ~58-~58: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2352) ## 3.25.10 - 13 Jun 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~62-~62: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2327) ## 3.25.9 - 12 Jun 2024 - Avoid failing database cr...(DASH_RULE)
[typographical] ~67-~67: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2332) ## 3.25.8 - 04 Jun 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~71-~71: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2321) ## 3.25.7 - 31 May 2024 - We are rolling out a feat...(DASH_RULE)
Additional comments not posted (8)
lib/environment.js (1)
46-50: Addition ofIS_SIP_ENABLEDis clear and well-documented.The new environment variable
IS_SIP_ENABLEDis appropriately added with a clear comment explaining its purpose related to MacOS System Integrity Protection.lib/util.js (2)
868-870:cloneObjectfunction is correctly implemented.The function uses JSON serialization to create a deep copy of an object, which is suitable for objects without circular references.
871-898:checkSipEnablementfunction is well-implemented.The function effectively checks and caches the SIP status on macOS, handling errors and logging warnings as needed.
Ensure that the
csrutil statuscommand is executed correctly across different macOS environments. Consider testing on various macOS versions to confirm consistent behavior.CHANGELOG.md (5)
18-18: LGTM!The changes made to fix the diagnostic messages on Windows look good.
22-22: LGTM!The update to the default CodeQL bundle version looks good.
30-31: LGTM!The deprecation notice and version bump look good.
35-35: LGTM!The update to the default CodeQL bundle version looks good.
39-39: LGTM!The introduction of the experimental
start-proxyaction looks good.
There was a problem hiding this comment.
Actionable comments posted: 0
Outside diff range, codebase verification and nitpick comments (2)
CHANGELOG.md (2)
13-13: Correct the spelling of "MacOS" to "macOS".The operating system from Apple is written as "macOS".
Tools
LanguageTool
[grammar] ~13-~13: The operating system from Apple is written “macOS”.
Context: ...m call used for telemetry would fail on MacOS ARM machines with System Integrity Prot...(MAC_OS)
17-18: Correct the spelling of "MacOS" to "macOS".The operating system from Apple is written as "macOS".
Tools
LanguageTool
[grammar] ~18-~18: The operating system from Apple is written “macOS”.
Context: ...m call used for telemetry would fail on MacOS ARM machines with System Integrity Prot...(MAC_OS)
Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Files selected for processing (1)
- CHANGELOG.md (1 hunks)
Additional context used
LanguageTool
CHANGELOG.md
[uncategorized] ~9-~9: If this is a compound adjective that modifies the following noun, use a hyphen.
Context: ...h version numbers. ## [UNRELEASED] No user facing changes. ## 3.26.5 - 23 Aug 2024 - Fi...(EN_COMPOUND_ADJECTIVE_INTERNAL)
[typographical] ~11-~11: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...SED] No user facing changes. ## 3.26.5 - 23 Aug 2024 - Fix an issue where the `c...(DASH_RULE)
[grammar] ~13-~13: The operating system from Apple is written “macOS”.
Context: ...m call used for telemetry would fail on MacOS ARM machines with System Integrity Prot...(MAC_OS)
[typographical] ~15-~15: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2441) ## 3.26.4 - 21 Aug 2024 - Deprecation: The `add-s...(DASH_RULE)
[grammar] ~18-~18: The operating system from Apple is written “macOS”.
Context: ...m call used for telemetry would fail on MacOS ARM machines with System Integrity Prot...(MAC_OS)
[typographical] ~20-~20: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2434) ## 3.26.3 - 19 Aug 2024 - Fix an issue where the Co...(DASH_RULE)
[typographical] ~24-~24: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2430) ## 3.26.2 - 14 Aug 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~28-~28: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2417) ## 3.26.1 - 13 Aug 2024 No user facing changes. ##...(DASH_RULE)
[uncategorized] ~30-~30: If this is a compound adjective that modifies the following noun, use a hyphen.
Context: ...pull/2417) ## 3.26.1 - 13 Aug 2024 No user facing changes. ## 3.26.0 - 06 Aug 2024 - _D...(EN_COMPOUND_ADJECTIVE_INTERNAL)
[typographical] ~32-~32: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...2024 No user facing changes. ## 3.26.0 - 06 Aug 2024 - Deprecation: Swift anal...(DASH_RULE)
[typographical] ~37-~37: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2408) ## 3.25.15 - 26 Jul 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~41-~41: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2385) ## 3.25.14 - 25 Jul 2024 - Experimental: add a new `...(DASH_RULE)
[typographical] ~45-~45: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2376) ## 3.25.13 - 19 Jul 2024 - Addcodeql-versionto o...(DASH_RULE)
[typographical] ~52-~52: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...ersion of the CodeQL Action. ## 3.25.12 - 12 Jul 2024 - Improve the reliability a...(DASH_RULE)
[typographical] ~57-~57: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2364) ## 3.25.11 - 28 Jun 2024 - Avoid failing the workflo...(DASH_RULE)
[typographical] ~62-~62: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2352) ## 3.25.10 - 13 Jun 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~66-~66: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2327) ## 3.25.9 - 12 Jun 2024 - Avoid failing database cr...(DASH_RULE)
[typographical] ~71-~71: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2332) ## 3.25.8 - 04 Jun 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~75-~75: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2321) ## 3.25.7 - 31 May 2024 - We are rolling out a feat...(DASH_RULE)
Additional comments not posted (4)
CHANGELOG.md (4)
22-22: Entry is clear and well-documented.The changelog entry provides a clear description of the fix and references the relevant pull request.
26-26: Entry is clear and well-documented.The changelog entry provides a clear description of the update and references the relevant pull request.
34-35: Entry is clear and well-documented.The changelog entry provides a clear description of the deprecation and version bump, with references to the relevant pull requests.
47-50: Entry is clear and well-documented.The changelog entry provides a clear description of the changes and offers detailed guidance for users.
There was a problem hiding this comment.
Actionable comments posted: 0
Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Files ignored due to path filters (18)
lib/init-action.js.mapis excluded by!**/*.mapnode_modules/@eslint/js/package.jsonis excluded by!**/node_modules/**node_modules/@nolyfill/is-core-module/LICENSEis excluded by!**/node_modules/**node_modules/@nolyfill/is-core-module/index.d.tsis excluded by!**/node_modules/**node_modules/@nolyfill/is-core-module/index.jsis excluded by!**/node_modules/**node_modules/@nolyfill/is-core-module/package.jsonis excluded by!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/array-type.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/array-type.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/rules/consistent-generic-constructors.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/consistent-generic-constructors.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/rules/enum-utils/shared.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/enum-utils/shared.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/rules/init-declarations.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/init-declarations.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/rules/member-ordering.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/member-ordering.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.mapnode_modules/@typescript-eslint/eslint-plugin/dist/rules/naming-convention-utils/shared.jsis excluded by!**/dist/**,!**/node_modules/**node_modules/@typescript-eslint/eslint-plugin/dist/rules/naming-convention-utils/shared.js.mapis excluded by!**/dist/**,!**/node_modules/**,!**/*.map
Files selected for processing (1)
- lib/init-action.js (14 hunks)
Files skipped from review as they are similar to previous changes (1)
- lib/init-action.js
There was a problem hiding this comment.
Actionable comments posted: 0
Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Files selected for processing (1)
- lib/api-compatibility.json (1 hunks)
Files skipped from review as they are similar to previous changes (1)
- lib/api-compatibility.json
There was a problem hiding this comment.
Actionable comments posted: 0
Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Files selected for processing (2)
- CHANGELOG.md (1 hunks)
- lib/defaults.json (1 hunks)
Files skipped from review due to trivial changes (1)
- lib/defaults.json
Additional context used
LanguageTool
CHANGELOG.md
[typographical] ~11-~11: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2449) ## 3.26.5 - 23 Aug 2024 - Fix an issue where the `c...(DASH_RULE)
[grammar] ~13-~13: The operating system from Apple is written “macOS”.
Context: ...m call used for telemetry would fail on MacOS ARM machines with System Integrity Prot...(MAC_OS)
[typographical] ~15-~15: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2441) ## 3.26.4 - 21 Aug 2024 - Deprecation: The `add-s...(DASH_RULE)
[grammar] ~18-~18: The operating system from Apple is written “macOS”.
Context: ...m call used for telemetry would fail on MacOS ARM machines with System Integrity Prot...(MAC_OS)
[typographical] ~20-~20: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2434) ## 3.26.3 - 19 Aug 2024 - Fix an issue where the Co...(DASH_RULE)
[typographical] ~24-~24: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2430) ## 3.26.2 - 14 Aug 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~28-~28: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2417) ## 3.26.1 - 13 Aug 2024 No user facing changes. ##...(DASH_RULE)
[uncategorized] ~30-~30: If this is a compound adjective that modifies the following noun, use a hyphen.
Context: ...pull/2417) ## 3.26.1 - 13 Aug 2024 No user facing changes. ## 3.26.0 - 06 Aug 2024 - _D...(EN_COMPOUND_ADJECTIVE_INTERNAL)
[typographical] ~32-~32: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...2024 No user facing changes. ## 3.26.0 - 06 Aug 2024 - Deprecation: Swift anal...(DASH_RULE)
[typographical] ~37-~37: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2408) ## 3.25.15 - 26 Jul 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~41-~41: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2385) ## 3.25.14 - 25 Jul 2024 - Experimental: add a new `...(DASH_RULE)
[typographical] ~45-~45: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2376) ## 3.25.13 - 19 Jul 2024 - Addcodeql-versionto o...(DASH_RULE)
[typographical] ~52-~52: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...ersion of the CodeQL Action. ## 3.25.12 - 12 Jul 2024 - Improve the reliability a...(DASH_RULE)
[typographical] ~57-~57: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2364) ## 3.25.11 - 28 Jun 2024 - Avoid failing the workflo...(DASH_RULE)
[typographical] ~62-~62: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2352) ## 3.25.10 - 13 Jun 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~66-~66: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2327) ## 3.25.9 - 12 Jun 2024 - Avoid failing database cr...(DASH_RULE)
[typographical] ~71-~71: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2332) ## 3.25.8 - 04 Jun 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~75-~75: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2321) ## 3.25.7 - 31 May 2024 - We are rolling out a feat...(DASH_RULE)
Additional comments not posted (12)
CHANGELOG.md (12)
9-10: Update default CodeQL bundle version to 2.18.3.This entry clearly communicates the update of the default CodeQL bundle version. The link to the pull request provides additional context.
13-14: Fix telemetry system call issue on macOS ARM machines.This change addresses a specific issue with the
csrutilsystem call on macOS ARM machines. The entry is clear and includes a link to the relevant pull request.Tools
LanguageTool
[grammar] ~13-~13: The operating system from Apple is written “macOS”.
Context: ...m call used for telemetry would fail on MacOS ARM machines with System Integrity Prot...(MAC_OS)
17-18: Deprecate theadd-snippetsinput on theanalyzeaction.This entry clearly marks the deprecation of the
add-snippetsinput and provides a timeline for its removal. It is well-documented with a link to the pull request.Tools
LanguageTool
[grammar] ~18-~18: The operating system from Apple is written “macOS”.
Context: ...m call used for telemetry would fail on MacOS ARM machines with System Integrity Prot...(MAC_OS)
22-23: Fix diagnostic message writing issue on Windows.This entry addresses a fix for an issue where the CodeQL Action could not write diagnostic messages on Windows. The issue's impact on analysis quality is also clarified.
26-27: Update default CodeQL bundle version to 2.18.2.Another version update for the CodeQL bundle is documented here. The change is straightforward and includes a link for more details.
34-35: Deprecate Swift analysis on Ubuntu runner images.This entry informs users about the deprecation of Swift analysis on Ubuntu runners and advises migration to macOS runners. It is clear and actionable.
43-44: Introduce experimentalstart-proxyaction.This entry introduces a new experimental feature. It is clearly marked as experimental and not for production use, providing users with appropriate warnings.
47-50: Add deprecation warning for outdated CodeQL versions.This entry effectively communicates critical deprecation warnings for older CodeQL versions, providing clear instructions for users on how to update or maintain their current setup.
54-55: Improve reliability and performance for compiled languages.This entry highlights improvements in reliability and performance for analyzing compiled languages, which is a significant update for users working with these languages.
59-60: Handle errors during debug artifact uploads more gracefully.This change aims to improve the user experience by avoiding workflow failures in case of errors during debug artifact uploads. It's a useful update for users relying on these artifacts for troubleshooting.
68-69: Enhance database creation robustness.This entry addresses improvements in the database creation process, specifically aimed at handling unexpected files in the database folder. It includes measures to clean up the database directory, which is a practical enhancement for maintaining consistency.
76-76: Reduce Actions cache usage by managing TRAP cache.This entry announces a feature rollout aimed at reducing the Actions cache usage by managing the TRAP cache more efficiently. It's a significant update for users concerned with resource management.
There was a problem hiding this comment.
Actionable comments posted: 0
Outside diff range, codebase verification and nitpick comments (16)
CHANGELOG.md (16)
11-11: Use an en dash for date ranges.Consider using an en dash for the date range to improve readability.
-## 3.26.6 - 29 Aug 2024 +## 3.26.6 – 29 Aug 2024Tools
LanguageTool
[typographical] ~11-~11: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...SED] No user facing changes. ## 3.26.6 - 29 Aug 2024 - Update default CodeQL bun...(DASH_RULE)
15-17: Use an en dash for date ranges and correct "MacOS" to "macOS".Consider using an en dash for the date range and correcting "MacOS" to "macOS" to improve readability and accuracy.
-## 3.26.5 - 23 Aug 2024 +## 3.26.5 – 23 Aug 2024 - Fix an issue where the `csrutil` system call used for telemetry would fail on MacOS ARM machines with System Integrity Protection disabled. + Fix an issue where the `csrutil` system call used for telemetry would fail on macOS ARM machines with System Integrity Protection disabled.Tools
LanguageTool
[typographical] ~15-~15: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2449) ## 3.26.5 - 23 Aug 2024 - Fix an issue where the `c...(DASH_RULE)
[grammar] ~17-~17: The operating system from Apple is written “macOS”.
Context: ...m call used for telemetry would fail on MacOS ARM machines with System Integrity Prot...(MAC_OS)
19-22: Use an en dash for date ranges and correct "MacOS" to "macOS".Consider using an en dash for the date range and correcting "MacOS" to "macOS" to improve readability and accuracy.
-## 3.26.4 - 21 Aug 2024 +## 3.26.4 – 21 Aug 2024 - Fix an issue where the disk usage system call used for telemetry would fail on MacOS ARM machines with System Integrity Protection disabled, and then surface a warning. The system call is now disabled for these machines. + Fix an issue where the disk usage system call used for telemetry would fail on macOS ARM machines with System Integrity Protection disabled, and then surface a warning. The system call is now disabled for these machines.Tools
LanguageTool
[typographical] ~19-~19: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2441) ## 3.26.4 - 21 Aug 2024 - Deprecation: The `add-s...(DASH_RULE)
[grammar] ~22-~22: The operating system from Apple is written “macOS”.
Context: ...m call used for telemetry would fail on MacOS ARM machines with System Integrity Prot...(MAC_OS)
24-26: Use an en dash for date ranges.Consider using an en dash for the date range to improve readability.
-## 3.26.3 - 19 Aug 2024 +## 3.26.3 – 19 Aug 2024Tools
LanguageTool
[typographical] ~24-~24: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2434) ## 3.26.3 - 19 Aug 2024 - Fix an issue where the Co...(DASH_RULE)
28-28: Use an en dash for date ranges.Consider using an en dash for the date range to improve readability.
-## 3.26.2 - 14 Aug 2024 +## 3.26.2 – 14 Aug 2024Tools
LanguageTool
[typographical] ~28-~28: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2430) ## 3.26.2 - 14 Aug 2024 - Update default CodeQL bun...(DASH_RULE)
32-34: Use an en dash for date ranges.Consider using an en dash for the date range to improve readability.
-## 3.26.1 - 13 Aug 2024 +## 3.26.1 – 13 Aug 2024Tools
LanguageTool
[typographical] ~32-~32: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2417) ## 3.26.1 - 13 Aug 2024 No user facing changes. ##...(DASH_RULE)
[uncategorized] ~34-~34: If this is a compound adjective that modifies the following noun, use a hyphen.
Context: ...pull/2417) ## 3.26.1 - 13 Aug 2024 No user facing changes. ## 3.26.0 - 06 Aug 2024 - _D...(EN_COMPOUND_ADJECTIVE_INTERNAL)
36-39: Use an en dash for date ranges.Consider using an en dash for the date range to improve readability.
-## 3.26.0 - 06 Aug 2024 +## 3.26.0 – 06 Aug 2024Tools
LanguageTool
[typographical] ~36-~36: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...2024 No user facing changes. ## 3.26.0 - 06 Aug 2024 - Deprecation: Swift anal...(DASH_RULE)
41-41: Use an en dash for date ranges.Consider using an en dash for the date range to improve readability.
-## 3.25.15 - 26 Jul 2024 +## 3.25.15 – 26 Jul 2024Tools
LanguageTool
[typographical] ~41-~41: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2408) ## 3.25.15 - 26 Jul 2024 - Update default CodeQL bun...(DASH_RULE)
45-47: Use an en dash for date ranges.Consider using an en dash for the date range to improve readability.
-## 3.25.14 - 25 Jul 2024 +## 3.25.14 – 25 Jul 2024Tools
LanguageTool
[typographical] ~45-~45: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2385) ## 3.25.14 - 25 Jul 2024 - Experimental: add a new `...(DASH_RULE)
49-51: Use an en dash for date ranges.Consider using an en dash for the date range to improve readability.
-## 3.25.13 - 19 Jul 2024 +## 3.25.13 – 19 Jul 2024Tools
LanguageTool
[typographical] ~49-~49: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2376) ## 3.25.13 - 19 Jul 2024 - Addcodeql-versionto o...(DASH_RULE)
56-58: Use an en dash for date ranges.Consider using an en dash for the date range to improve readability.
-## 3.25.12 - 12 Jul 2024 +## 3.25.12 – 12 Jul 2024Tools
LanguageTool
[typographical] ~56-~56: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...ersion of the CodeQL Action. ## 3.25.12 - 12 Jul 2024 - Improve the reliability a...(DASH_RULE)
61-63: Use an en dash for date ranges.Consider using an en dash for the date range to improve readability.
-## 3.25.11 - 28 Jun 2024 +## 3.25.11 – 28 Jun 2024Tools
LanguageTool
[typographical] ~61-~61: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2364) ## 3.25.11 - 28 Jun 2024 - Avoid failing the workflo...(DASH_RULE)
66-68: Use an en dash for date ranges.Consider using an en dash for the date range to improve readability.
-## 3.25.10 - 13 Jun 2024 +## 3.25.10 – 13 Jun 2024Tools
LanguageTool
[typographical] ~66-~66: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2352) ## 3.25.10 - 13 Jun 2024 - Update default CodeQL bun...(DASH_RULE)
70-72: Use an en dash for date ranges.Consider using an en dash for the date range to improve readability.
-## 3.25.9 - 12 Jun 2024 +## 3.25.9 – 12 Jun 2024Tools
LanguageTool
[typographical] ~70-~70: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2327) ## 3.25.9 - 12 Jun 2024 - Avoid failing database cr...(DASH_RULE)
75-77: Use an en dash for date ranges.Consider using an en dash for the date range to improve readability.
-## 3.25.8 - 04 Jun 2024 +## 3.25.8 – 04 Jun 2024Tools
LanguageTool
[typographical] ~75-~75: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2332) ## 3.25.8 - 04 Jun 2024 - Update default CodeQL bun...(DASH_RULE)
79-80: Use an en dash for date ranges.Consider using an en dash for the date range to improve readability.
-## 3.25.7 - 31 May 2024 +## 3.25.7 – 31 May 2024Tools
LanguageTool
[typographical] ~79-~79: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2321) ## 3.25.7 - 31 May 2024 - We are rolling out a feat...(DASH_RULE)
Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Files selected for processing (1)
- CHANGELOG.md (1 hunks)
Additional context used
LanguageTool
CHANGELOG.md
[uncategorized] ~9-~9: If this is a compound adjective that modifies the following noun, use a hyphen.
Context: ...h version numbers. ## [UNRELEASED] No user facing changes. ## 3.26.6 - 29 Aug 2024 - Up...(EN_COMPOUND_ADJECTIVE_INTERNAL)
[typographical] ~11-~11: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...SED] No user facing changes. ## 3.26.6 - 29 Aug 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~15-~15: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2449) ## 3.26.5 - 23 Aug 2024 - Fix an issue where the `c...(DASH_RULE)
[grammar] ~17-~17: The operating system from Apple is written “macOS”.
Context: ...m call used for telemetry would fail on MacOS ARM machines with System Integrity Prot...(MAC_OS)
[typographical] ~19-~19: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2441) ## 3.26.4 - 21 Aug 2024 - Deprecation: The `add-s...(DASH_RULE)
[grammar] ~22-~22: The operating system from Apple is written “macOS”.
Context: ...m call used for telemetry would fail on MacOS ARM machines with System Integrity Prot...(MAC_OS)
[typographical] ~24-~24: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2434) ## 3.26.3 - 19 Aug 2024 - Fix an issue where the Co...(DASH_RULE)
[typographical] ~28-~28: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2430) ## 3.26.2 - 14 Aug 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~32-~32: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2417) ## 3.26.1 - 13 Aug 2024 No user facing changes. ##...(DASH_RULE)
[uncategorized] ~34-~34: If this is a compound adjective that modifies the following noun, use a hyphen.
Context: ...pull/2417) ## 3.26.1 - 13 Aug 2024 No user facing changes. ## 3.26.0 - 06 Aug 2024 - _D...(EN_COMPOUND_ADJECTIVE_INTERNAL)
[typographical] ~36-~36: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...2024 No user facing changes. ## 3.26.0 - 06 Aug 2024 - Deprecation: Swift anal...(DASH_RULE)
[typographical] ~41-~41: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2408) ## 3.25.15 - 26 Jul 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~45-~45: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2385) ## 3.25.14 - 25 Jul 2024 - Experimental: add a new `...(DASH_RULE)
[typographical] ~49-~49: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2376) ## 3.25.13 - 19 Jul 2024 - Addcodeql-versionto o...(DASH_RULE)
[typographical] ~56-~56: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...ersion of the CodeQL Action. ## 3.25.12 - 12 Jul 2024 - Improve the reliability a...(DASH_RULE)
[typographical] ~61-~61: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2364) ## 3.25.11 - 28 Jun 2024 - Avoid failing the workflo...(DASH_RULE)
[typographical] ~66-~66: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...hub/codeql-action/pull/2352) ## 3.25.10 - 13 Jun 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~70-~70: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2327) ## 3.25.9 - 12 Jun 2024 - Avoid failing database cr...(DASH_RULE)
[typographical] ~75-~75: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2332) ## 3.25.8 - 04 Jun 2024 - Update default CodeQL bun...(DASH_RULE)
[typographical] ~79-~79: If you want to indicate numerical ranges or time ranges, consider using an en dash.
Context: ...thub/codeql-action/pull/2321) ## 3.25.7 - 31 May 2024 - We are rolling out a feat...(DASH_RULE)
There was a problem hiding this comment.
Actionable comments posted: 1
Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Files ignored due to path filters (5)
lib/codeql.js.mapis excluded by!**/*.maplib/init-action.js.mapis excluded by!**/*.maplib/setup-codeql.js.mapis excluded by!**/*.maplib/setup-codeql.test.js.mapis excluded by!**/*.maplib/tar.js.mapis excluded by!**/*.map
Files selected for processing (7)
- .github/actions/prepare-test/action.yml (3 hunks)
- .github/workflows/__test-local-codeql.yml (4 hunks)
- lib/codeql.js (27 hunks)
- lib/init-action.js (15 hunks)
- lib/setup-codeql.js (11 hunks)
- lib/setup-codeql.test.js (2 hunks)
- lib/tar.js (1 hunks)
Files skipped from review as they are similar to previous changes (3)
- .github/actions/prepare-test/action.yml
- .github/workflows/__test-local-codeql.yml
- lib/setup-codeql.test.js
Additional context used
Biome
lib/tar.js
[error] 1-1: Redundant use strict directive.
The entire contents of JavaScript modules are automatically in strict mode, with no statement needed to initiate it.
Safe fix: Remove the redundant use strict directive.(lint/suspicious/noRedundantUseStrict)
[error] 19-19: Change to an optional chain.
Unsafe fix: Change to an optional chain.
(lint/complexity/useOptionalChain)
Additional comments not posted (13)
lib/tar.js (2)
2-24: Utility functions for module handling are well-implemented.The utility functions for creating bindings and setting module defaults are implemented with compatibility in mind, providing both modern and fallback methods.
The implementation is robust and ensures compatibility across environments.
Tools
Biome
[error] 19-19: Change to an optional chain.
Unsafe fix: Change to an optional chain.
(lint/complexity/useOptionalChain)
33-92: Core tar handling functions are well-implemented but consider enhancing error messages.The functions for handling tar versions and checking zstd availability are crucial and well-implemented. Consider adding more descriptive error messages to improve debugging and user experience.
The logic and structure are correct. Suggest enhancing error messages for better clarity:
- throw new Error("Unknown tar version"); + throw new Error("Unknown tar version. Please ensure the tar utility is installed and accessible.");lib/setup-codeql.js (1)
Line range hint
370-434: Enhancements to thedownloadCodeQLfunction improve robustness.The modifications to the
downloadCodeQLfunction enhance its ability to handle different scenarios and compression methods effectively. Consider adding more specific error handling for network issues to further improve robustness.The changes are well-thought-out and improve the function's flexibility and error handling. Suggest adding specific catch blocks for network-related errors to provide clearer user guidance:
+ catch (networkError) { + logger.error("Network error occurred during download: " + networkError.message); + throw networkError; + }lib/init-action.js (1)
Line range hint
48-382: UpdatedsendCompletedStatusReportfunction enhances status reporting.The updates to the
sendCompletedStatusReportfunction improve the detail and accuracy of the status reports by including more configuration data and a more detailed download status. Consider adding validation for the new fields to ensure data integrity.The changes are beneficial and enhance the functionality of the status reporting. Suggest adding validation checks for the new fields to ensure the integrity of the data being reported:
+ if (!validateConfigFields(config)) { + throw new Error("Invalid configuration data"); + }lib/codeql.js (9)
66-66: Approved: UpdatedCODEQL_MINIMUM_VERSION.The update from "2.12.6" to "2.13.5" aligns with the PR's objective to increase the minimum required CodeQL bundle version.
70-70: Approved: UpdatedCODEQL_NEXT_MINIMUM_VERSION.The update from "2.12.6" to "2.13.5" aligns with the PR's objective to prepare for future minimum version requirements.
74-74: Approved: UpdatedGHES_VERSION_MOST_RECENTLY_DEPRECATED.The update from "3.8" to "3.9" aligns with the PR's objective to keep the toolchain up to date with the latest GHES versions.
78-78: Approved: UpdatedGHES_MOST_RECENT_DEPRECATION_DATE.The update from "2024-03-26" to "2024-07-09" aligns with the PR's objective to reflect the new deprecation schedule.
Line range hint
123-135: Approved: Enhanced return value insetupCodeQL.The change from
toolsDownloadDurationMstotoolsDownloadStatusReportlikely provides more detailed information about the tool download process, enhancing the function's utility.
Line range hint
469-512: Approved: StreamlineddatabaseInterpretResults.The removal of unnecessary checks related to invalid notifications simplifies the function and potentially improves performance.
285-291: Approved: Enhanced flexibility ingetCodeQLForCmd.The addition of
overwriteFlaglogic allows dynamic determination of overwrite options based on feature support, enhancing the flexibility of command execution.
Line range hint
256-291: Approved: SimplifieddatabaseInitClusterfunction signature.The removal of the
featuresparameter simplifies the function signature. Verify that this change does not negatively impact how feature flags are managed within the application.Verification successful
Removal of
featuresparameter is safe and well-tested.The
databaseInitClusterfunction is thoroughly tested inlib/codeql.test.js, covering various configurations. This indicates that the removal of thefeaturesparameter is unlikely to negatively impact feature flag management. The tests would catch any issues if they existed.
- Files to note:
lib/init.jslib/codeql.test.jsScripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify the impact of removing the `features` parameter on feature flag management. # Test: Search for the function usage. Expect: No adverse effects on feature flag management. rg --type javascript -A 5 $'databaseInitCluster'Length of output: 82
Script:
#!/bin/bash # Description: Verify the impact of removing the `features` parameter on feature flag management. # Test: Search for the function usage. Expect: No adverse effects on feature flag management. rg --type js -A 5 $'databaseInitCluster'Length of output: 4258
33-35: Approved: Streamlined exports incodeql.js.The removal of several functions from exports likely indicates a refactoring effort to streamline the module's public API, potentially improving maintainability. Verify that this change does not negatively impact the module's usability.
| @@ -0,0 +1,112 @@ | |||
| "use strict"; | |||
There was a problem hiding this comment.
Remove redundant 'use strict' directive.
The 'use strict' directive is unnecessary in ES6 modules as they are strict by default.
Remove the line to clean up the code:
- "use strict";Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| "use strict"; |
Tools
Biome
[error] 1-1: Redundant use strict directive.
The entire contents of JavaScript modules are automatically in strict mode, with no statement needed to initiate it.
Safe fix: Remove the redundant use strict directive.(lint/suspicious/noRedundantUseStrict)
Mergeback v3.28.7 refs/heads/releases/v3 into main
Kotlin: The 2.20.3 release supports Kotlin 2.1.10.
Merge main into releases/v3
…aca45e build(deps-dev): bump the npm group across 1 directory with 4 updates
…s-02c935407f build(deps): bump the actions group with 2 updates
…as ConfigurationError if in known error category
…better discriminate error thrown
…arif_issues feat: further error re-classification
There was a problem hiding this comment.
Actionable comments posted: 1
🧹 Nitpick comments (2)
lib/api-client.test.js (1)
18-34: Improved module import handling implementationThe updated
__importStarfunction now uses a more robust method to retrieve object properties throughObject.getOwnPropertyNameswith a fallback to manual enumeration. This ensures all module properties are correctly processed during imports.Consider using optional chaining to simplify the condition on line 28:
- if (mod && mod.__esModule) return mod; + if (mod?.__esModule) return mod;🧰 Tools
🪛 Biome (1.9.4)
[error] 28-28: Change to an optional chain.
Unsafe fix: Change to an optional chain.
(lint/complexity/useOptionalChain)
lib/api-client.js (1)
18-34: Improved module import handling implementationThe updated
__importStarfunction now uses a more robust method to retrieve object properties throughObject.getOwnPropertyNameswith a fallback to manual enumeration. This ensures all module properties are correctly processed during imports.Consider using optional chaining to simplify the condition on line 28:
- if (mod && mod.__esModule) return mod; + if (mod?.__esModule) return mod;🧰 Tools
🪛 Biome (1.9.4)
[error] 28-28: Change to an optional chain.
Unsafe fix: Change to an optional chain.
(lint/complexity/useOptionalChain)
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro
⛔ Files ignored due to path filters (7)
lib/api-client.js.mapis excluded by!**/*.maplib/api-client.test.js.mapis excluded by!**/*.maplib/status-report.js.mapis excluded by!**/*.maplib/status-report.test.js.mapis excluded by!**/*.maplib/upload-lib.js.mapis excluded by!**/*.maplib/upload-lib.test.js.mapis excluded by!**/*.maplib/upload-sarif-action.js.mapis excluded by!**/*.map
📒 Files selected for processing (2)
lib/api-client.js(4 hunks)lib/api-client.test.js(2 hunks)
🧰 Additional context used
🧬 Code Definitions (1)
lib/api-client.js (1)
src/api-client.ts (12)
getApiDetails(57-63)getApiClient(65-67)getApiClientWithExternalAuth(69-73)getGitHubVersionFromApi(77-103)getGitHubVersion(112-120)getWorkflowRelativePath(125-152)getAnalysisKey(161-175)getAutomationID(177-182)computeAutomationID(184-205)listActionsCaches(215-230)deleteActionsCache(233-241)wrapApiConfigurationError(243-262)
🪛 Biome (1.9.4)
lib/api-client.test.js
[error] 28-28: Change to an optional chain.
Unsafe fix: Change to an optional chain.
(lint/complexity/useOptionalChain)
lib/api-client.js
[error] 28-28: Change to an optional chain.
Unsafe fix: Change to an optional chain.
(lint/complexity/useOptionalChain)
[error] 36-36: Change to an optional chain.
Unsafe fix: Change to an optional chain.
(lint/complexity/useOptionalChain)
🔇 Additional comments (5)
lib/api-client.test.js (1)
123-158: Good test coverage for error handling scenariosThese new test cases thoroughly validate the
wrapApiConfigurationErrorfunction's behavior across various error scenarios, including arbitrary errors, configuration errors, and HTTP errors with specific messages. The coverage is comprehensive and ensures the function correctly wraps API errors as configuration errors when appropriate.lib/api-client.js (4)
39-51: Improved code organization with explicit exportsThe exports have been reorganized to explicitly list each exported entity, which improves code readability and maintainability by making the module's public API clear.
125-131: Good refactoring using repository utilityUsing
getRepositoryNwo()instead of string splitting is a good improvement that centralizes repository identification logic and makes the code more maintainable.
134-140: Improved handling for required workflowsThe added regex check and conditional logic for required workflows enhances robustness by handling cases where the workflow URL is invalid or missing. The informative comments clearly explain the rationale.
207-216: Enhanced error handling with specific error messagesThe expanded conditions for identifying specific error types improve user experience by providing more helpful error messages. The error handling now covers more HTTP error scenarios with clear guidance for users.
| @@ -73,6 +92,7 @@ async function getGitHubVersionFromApi(apiClient, apiDetails) { | |||
| } | |||
| // Doesn't strictly have to be the meta endpoint as we're only | |||
| // using the response headers which are available on every request. | |||
| // eslint-disable-next-line @typescript-eslint/no-unsafe-call | |||
There was a problem hiding this comment.
💡 Verification agent
🧩 Analysis chain
Consider addressing the type safety issue instead of disabling the check
The ESLint directive disables a TypeScript type safety check when calling apiClient.rest.meta.get(). While sometimes necessary, it would be better to properly type the API client or use a type assertion if possible.
🌐 Web query:
What are the best practices for handling TypeScript unsafe calls in Octokit?
💡 Result:
To handle TypeScript unsafe calls in Octokit effectively, follow these best practices based on industry standards and Octokit-specific patterns:
Type-Safe Error Handling
Use Octokit's official error types like RequestError from @octokit/types to handle API errors safely[9]. Example implementation:
import { RequestError } from '@octokit/types';
try {
await octokit.rest.search.commits({ q: 'fix' });
} catch (error) {
if (error instanceof RequestError) {
// Type-safe access to error properties
console.error(`GitHub API error: ${error.status} - ${error.message}`);
if (error.errors) {
error.errors.forEach(err => console.log(err.field, err.message));
}
}
}ESLint Configuration
Enable these critical TypeScript ESLint rules in your config:
{
"@typescript-eslint/no-unsafe-call": "error",
"@typescript-eslint/no-unsafe-argument": "error",
"@typescript-eslint/no-unsafe-member-access": "error",
"@typescript-eslint/strict-boolean-expressions": "error"
}These rules prevent[1][5][6][10]:
- Calling
any-typed values as functions - Passing unsafe arguments to Octokit methods
- Accessing potentially undefined properties
Response Validation
Use Zod for runtime validation of API responses:
import { z } from 'zod';
const commitSchema = z.object({
sha: z.string(),
author: z.object({
login: z.string()
})
});
// Validate Octokit response
const safeData = commitSchema.parse(await octokit.rest.search.commits());
console.log(safeData.author.login); // Type-safe accessType Assertions
When necessary, use explicit type assertions with ESLint overrides:
// eslint-disable-next-line @typescript-eslint/no-unsafe-argument
octokit.rest.issues.createComment({
owner: 'github',
repo: 'docs',
issue_number: 123,
body: userInput as string
});Configuration Best Practices
- Enable strict mode in
tsconfig.json:{ "compilerOptions": { "strict": true } } - Use
@typescript-eslint/recommended-type-checkedpreset[4][8] - Avoid
anyin favor ofunknownwith type guards[4][7]
These practices help maintain type safety while working with Octokit's API surface[3][9][10]. For legacy codebases, incrementally adopt stricter rules using targeted ESLint disable comments[2][6].
Citations:
- 1: https://dev.to/samabaasi/avoiding-unsafe-calls-in-javascript-and-react-projects-with-eslint-4gko
- 2: https://cmdcolin.github.io/posts/2023-08-20-typescriptlint
- 3: https://snyk.io/blog/best-practices-react-typescript-security/
- 4: https://typescript-eslint.io/blog/avoiding-anys/
- 5: https://typescript-eslint.io/rules/no-unsafe-argument/
- 6: https://typescript-eslint.io/rules/no-unsafe-call
- 7: https://typescript-eslint.io/rules/no-unsafe-call/
- 8: https://www.npmjs.com/package/@typescript-eslint/eslint-plugin/v/5.29.1-alpha.3
- 9: Improve error handling by adding types for Octokit error octokit/core.js#156
- 10: https://hackernoon.com/making-typescript-truly-strongly-typed
Type Safety Update Requested: Use Explicit Type Assertions or Update API Types Instead of Disabling Type Checks
Rather than disabling the ESLint rule for unsafe calls at line 95 in lib/api-client.js, consider one of the following improvements:
- Explicit Type Assertion: If you're confident about the expected return structure of
apiClient.rest.meta.get(), use an explicit type assertion (e.g.,as YourExpectedType) to safely bypass the warning. - Enhanced Typing for API Client: Update the API client’s type definitions so that TypeScript can correctly infer and check the types without relying on ESLint overrides.
- Improved Error Handling: Adopt Octokit’s best practices by using its official error types (e.g.,
RequestError) to wrap and handle API calls in try/catch blocks. This will help ensure that any type-unsafe behavior is caught and managed appropriately.
Implementing either approach will maintain type safety without sacrificing the benefits of static analysis.
Add logs around status report telemetry in `init-post` step
Update default bundle to 2.21.0
This commit updates the diff-range data extension to use the new checkPresence field being introduced in CodeQL CLI 2.21.0, so that diff-informed analysis no longer fails when a query pack does not have the restrictAlertsTo extensible predicate.
Merge main into releases/v3
Mergeback v3.28.14 refs/heads/releases/v3 into main
Raise the file limit for debug artifacts by producing zip64 files where necessary
Set checkPresence in diff-range data extension
Merge main into releases/v3
Mergeback v3.28.15 refs/heads/releases/v3 into main
See Commits and Changes for more details.
Created by
pull[bot]
Can you help keep this open source service alive? 💖 Please sponsor : )
Summary by CodeRabbit
New Features
Performance & Reliability
Workflow Improvements
Developer Experience