[sonic-snmpagent] SONiC physical entity mib extension

src/sonic_ax_impl/mibs/__init__.py

@@ -25,27 +25,6 @@
 TABLE_NAME_SEPARATOR_COLON = ':'
 TABLE_NAME_SEPARATOR_VBAR = '|'
 
-# This is used in both rfc2737 and rfc3433
-SENSOR_PART_ID_MAP = {
-    "temperature":  1,
-    "voltage":      2,
-    "rx1power":     11,
-    "rx2power":     21,
-    "rx3power":     31,
-    "rx4power":     41,
-    "tx1bias":      12,
-    "tx2bias":      22,
-    "tx3bias":      32,
-    "tx4bias":      42,
-    "tx1power":     13,
-    "tx2power":     23,
-    "tx3power":     33,
-    "tx4power":     43,
-}
-
-# IfIndex to OID multiplier for transceiver
-IFINDEX_SUB_ID_MULTIPLIER = 1000
-
 redis_kwargs = {'unix_socket_path': '/var/run/redis/redis.sock'}
 
 
@@ -65,6 +44,22 @@ def chassis_info_table(chassis_name):
 
     return "CHASSIS_INFO" + TABLE_NAME_SEPARATOR_VBAR + chassis_name
 
+def fan_info_table(fan_name):
+    """
+    :param: fan_name: fan name
+    :return: fan info entry for this fan
+    """
+    return 'FAN_INFO' + TABLE_NAME_SEPARATOR_VBAR + fan_name
+
+
+def fan_drawer_info_table(drawer_name):
+    """
+    :param: drawer_name: fan drawer name
+    :return: fan drawer info entry for this fan
+    """
+    return 'FAN_DRAWER_INFO' + TABLE_NAME_SEPARATOR_VBAR + drawer_name
+
+
 def psu_info_table(psu_name):
     """
     :param: psu_name: psu name
@@ -73,6 +68,15 @@ def psu_info_table(psu_name):
 
     return "PSU_INFO" + TABLE_NAME_SEPARATOR_VBAR + psu_name
 
+
+def physical_entity_info_table(name):
+    """
+    :param: name: object name
+    :return: entity info entry for this object
+    """
+    return 'PHYSICAL_ENTITY_INFO' + TABLE_NAME_SEPARATOR_VBAR + name
+
+
 def counter_table(sai_id):
     """
     :param if_name: given sai_id to cast.
@@ -106,6 +110,14 @@ def transceiver_dom_table(port_name):
 
     return "TRANSCEIVER_DOM_SENSOR" + TABLE_NAME_SEPARATOR_VBAR + port_name
 
+def thermal_info_table(thermal_name):
+    """
+    :param: port_name: port name
+    :return: transceiver dom entry for this port
+    """
+
+    return "TEMPERATURE_INFO" + TABLE_NAME_SEPARATOR_VBAR + thermal_name
+
 def lldp_entry_table(if_name):
     """
     :param if_name: given interface to cast.
@@ -386,40 +398,6 @@ def get_device_metadata(db_conn):
     device_metadata = db_conn.get_all(db_conn.STATE_DB, DEVICE_METADATA)
     return device_metadata
 
-def get_transceiver_sub_id(ifindex):
-    """
-    Returns sub OID for transceiver. Sub OID is calculated as folows:
-    +------------+------------+
-    |Interface   |Index       |
-    +------------+------------+
-    |Ethernet[X] |X * 1000    |
-    +------------+------------+
-    ()
-    :param ifindex: interface index
-    :return: sub OID of a port calculated as sub OID = {{index}} * 1000
-    """
-
-    return (ifindex * IFINDEX_SUB_ID_MULTIPLIER, )
-
-def get_transceiver_sensor_sub_id(ifindex, sensor):
-    """
-    Returns sub OID for transceiver sensor. Sub OID is calculated as folows:
-    +-------------------------------------+------------------------------+
-    |Sensor                               |Index                         |
-    +-------------------------------------+------------------------------+
-    |RX Power for Ethernet[X]/[LANEID]    |X * 1000 + LANEID * 10 + 1    |
-    |TX Bias for Ethernet[X]/[LANEID]     |X * 1000 + LANEID * 10 + 2    |
-    |Temperature for Ethernet[X]          |X * 1000 + 1                  |
-    |Voltage for Ethernet[X]/[LANEID]     |X * 1000 + 2                  |
-    +-------------------------------------+------------------------------+
-    ()
-    :param ifindex: interface index
-    :param sensor: sensor key
-    :return: sub OID = {{index}} * 1000 + {{lane}} * 10 + sensor id
-    """
-
-    transceiver_oid, = get_transceiver_sub_id(ifindex)
-    return (transceiver_oid + SENSOR_PART_ID_MAP[sensor], )
 
 def get_redis_pubsub(db_conn, db_name, pattern):
     redis_client = db_conn.get_redis_client(db_name)
@@ -428,6 +406,7 @@ def get_redis_pubsub(db_conn, db_name, pattern):
     pubsub.psubscribe("__keyspace@{}__:{}".format(db, pattern))
     return pubsub
 
+
 class RedisOidTreeUpdater(MIBUpdater):
     def __init__(self, prefix_str):
         super().__init__()

src/sonic_ax_impl/mibs/ietf/physical_entity_sub_oid_generator.py

@@ -0,0 +1,188 @@
+"""
+For non-port entity, the rule to generate entPhysicalIndex describes below:
+The entPhysicalIndex is divided into 3 layers:
+    1. Module layer which includes modules located on system (e.g. fan drawer, PSU)
+    2. Device layer which includes system devices (e.g. fan )
+    3. Sensor layer which includes system sensors (e.g. temperature sensor, fan sensor)
+The entPhysicalIndex is a 9 digits number, and each digit describes below:
+Digit 1: Module Type
+Digit 2~3: Module Index
+Digit 4~5: Device Type
+Digit 6~7: Device Index
+Digit 8: Sensor Type
+Digit 9: Sensor Index
+
+Module Type describes below:
+2 - Management
+5 - Fan Drawer
+6 - PSU
+Device Type describes below:
+01 - PS
+02 - Fan
+24 - Power Monitor (temperature, power, current, voltage...)
+99 - Chassis Thermals
+Sensor Type describes below:
+1 - Temperature
+2 - Fan Tachometers
+3 - Power
+4 - Current
+5 - Voltage
+
+e.g. 501000000 means the first fan drawer, 502020100 means the first fan of the second fan drawer
+
+As we are using ifindex to generate port entPhysicalIndex and ifindex might be a valur larger 
+than 99, we uses a different way to generate port entPhysicalIndex.
+
+For port entity, the entPhysicalIndex is a 10 digits number, and each digit describes below:
+Digit 1: 1
+Digit 2~8: ifindex
+Digit 9: Sensor Type
+Digit 10: Sensor Index
+
+Port Sensor Type describes below:
+1 - Temperature
+2 - TX Power
+3 - RX Power
+4 - TX BIAS
+5 - Voltage
+"""
+
+# Moduel Type Definition
+MODULE_TYPE_MULTIPLE = 100000000
+MODULE_INDEX_MULTIPLE = 1000000
+MODULE_TYPE_MGMT = 2 * MODULE_TYPE_MULTIPLE
+MODULE_TYPE_FAN_DRAWER = 5 * MODULE_TYPE_MULTIPLE
+MODULE_TYPE_PSU = 6 * MODULE_TYPE_MULTIPLE
+MODULE_TYPE_PORT = 1000000000
+
+# Device Type Definition
+DEVICE_TYPE_MULTIPLE = 10000
+DEVICE_INDEX_MULTIPLE = 100
+DEVICE_TYPE_PS = 1 * DEVICE_TYPE_MULTIPLE
+DEVICE_TYPE_FAN = 2 * DEVICE_TYPE_MULTIPLE
+DEVICE_TYPE_CHASSIS_THERMAL = 99 * DEVICE_TYPE_MULTIPLE
+DEVICE_TYPE_POWER_MONITOR = 24 * DEVICE_TYPE_MULTIPLE
+
+# Sensor Type Definition
+SENSOR_TYPE_MULTIPLE = 10
+SENSOR_TYPE_TEMP = 1 * SENSOR_TYPE_MULTIPLE
+SENSOR_TYPE_FAN = 2 * SENSOR_TYPE_MULTIPLE
+SENSOR_TYPE_POWER = 3 * SENSOR_TYPE_MULTIPLE
+SENSOR_TYPE_CURRENT = 4 * SENSOR_TYPE_MULTIPLE
+SENSOR_TYPE_VOLTAGE = 5 * SENSOR_TYPE_MULTIPLE
+
+# Port entPhysicalIndex Definition
+PORT_IFINDEX_MULTIPLE = 100
+SENSOR_TYPE_PORT_TX_POWER = 2 * SENSOR_TYPE_MULTIPLE
+SENSOR_TYPE_PORT_RX_POWER = 3 * SENSOR_TYPE_MULTIPLE
+SENSOR_TYPE_PORT_TX_BIAS = 4 * SENSOR_TYPE_MULTIPLE
+
+CHASSIS_SUB_ID = 1
+CHASSIS_MGMT_SUB_ID = MODULE_TYPE_MGMT
+
+# This is used in both rfc2737 and rfc3433
+XCVR_SENSOR_PART_ID_MAP = {
+    "temperature":  SENSOR_TYPE_TEMP,
+    "tx1power":     SENSOR_TYPE_PORT_TX_POWER + 1,
+    "tx2power":     SENSOR_TYPE_PORT_TX_POWER + 2,
+    "tx3power":     SENSOR_TYPE_PORT_TX_POWER + 3,
+    "tx4power":     SENSOR_TYPE_PORT_TX_POWER + 4,
+    "rx1power":     SENSOR_TYPE_PORT_RX_POWER + 1,
+    "rx2power":     SENSOR_TYPE_PORT_RX_POWER + 2,
+    "rx3power":     SENSOR_TYPE_PORT_RX_POWER + 3,
+    "rx4power":     SENSOR_TYPE_PORT_RX_POWER + 4,
+    "tx1bias":      SENSOR_TYPE_PORT_TX_BIAS + 1,
+    "tx2bias":      SENSOR_TYPE_PORT_TX_BIAS + 2,
+    "tx3bias":      SENSOR_TYPE_PORT_TX_BIAS + 3,
+    "tx4bias":      SENSOR_TYPE_PORT_TX_BIAS + 4,
+    "voltage":      SENSOR_TYPE_VOLTAGE,
+}
+
+PSU_SENSOR_PART_ID_MAP = {
+    'temperature': SENSOR_TYPE_TEMP,
+    'power': SENSOR_TYPE_POWER,
+    'current': SENSOR_TYPE_CURRENT,
+    'voltage': SENSOR_TYPE_VOLTAGE
+}
+
+def get_chassis_thermal_sub_id(position):
+    """
+    Returns sub OID for thermals that belong to chassis. Sub OID is calculated as follows:
+    sub OID = CHASSIS_MGMT_SUB_ID + DEVICE_TYPE_CHASSIS_THERMAL + position * DEVICE_INDEX_MULTIPLE + SENSOR_TYPE_TEMP, 
+    :param position: thermal position
+    :return: sub OID of the thermal
+    """
+    return (CHASSIS_MGMT_SUB_ID + DEVICE_TYPE_CHASSIS_THERMAL + position * DEVICE_INDEX_MULTIPLE + SENSOR_TYPE_TEMP, )
+
+def get_fan_sub_id(parent_id, position):
+    """
+    Returns sub OID for fan. Sub OID is calculated as follows:
+    sub OID = parent_id[0] + DEVICE_TYPE_FAN + position * DEVICE_INDEX_MULTIPLE
+    If parent_id is chassis OID, will use a "virtual" fan drawer OID as its parent_id
+    :param parent_id: parent device sub OID
+    :param position: fan position
+    :return: sub OID of the fan
+    """
+    if parent_id[0] == CHASSIS_SUB_ID:
+        parent_id = MODULE_TYPE_FAN_DRAWER + position * MODULE_INDEX_MULTIPLE
+    else:
+        parent_id = parent_id[0]
+    return (parent_id + DEVICE_TYPE_FAN + position * DEVICE_INDEX_MULTIPLE, )
+
+def get_fan_drawer_sub_id(position):
+    """
+    Returns sub OID for fan drawer. Sub OID is calculated as follows:
+    sub OID = MODULE_TYPE_FAN_DRAWER + position * MODULE_INDEX_MULTIPLE
+    :param position: fan drawer position
+    :return: sub OID of the fan drawer
+    """
+    return (MODULE_TYPE_FAN_DRAWER + position * MODULE_INDEX_MULTIPLE, )
+
+def get_fan_tachometers_sub_id(parent_id):
+    """
+    Returns sub OID for fan tachometers. Sub OID is calculated as follows:
+    sub OID = parent_id[0] + SENSOR_TYPE_FAN
+    :param parent_id: parent device sub OID
+    :return: sub OID of the fan tachometers
+    """
+    return (parent_id[0] + SENSOR_TYPE_FAN, )
+
+def get_psu_sub_id(position):
+    """
+    Returns sub OID for PSU. Sub OID is calculated as follows:
+    sub OID = MODULE_TYPE_PSU + position * MODULE_INDEX_MULTIPLE
+    :param position: PSU position
+    :return: sub OID of PSU
+    """
+    return (MODULE_TYPE_PSU + position * MODULE_INDEX_MULTIPLE, )
+
+def get_psu_sensor_sub_id(parent_id, sensor):
+    """
+    Returns sub OID for PSU sensor. Sub OID is calculated as follows:
+    sub OID = parent_id[0] + DEVICE_TYPE_POWER_MONITOR + PSU_SENSOR_PART_ID_MAP[sensor]
+    :param parent_id: PSU oid
+    :param sensor: PSU sensor name
+    :return: sub OID of PSU sensor
+    """
+    return (parent_id[0] + DEVICE_TYPE_POWER_MONITOR + PSU_SENSOR_PART_ID_MAP[sensor], )
+
+def get_transceiver_sub_id(ifindex):
+    """
+    Returns sub OID for transceiver. Sub OID is calculated as folows:
+    sub OID = MODULE_TYPE_PORT + ifindex * PORT_IFINDEX_MULTIPLE
+    :param ifindex: interface index
+    :return: sub OID of a port
+    """
+    return (MODULE_TYPE_PORT + ifindex * PORT_IFINDEX_MULTIPLE, )
+
+def get_transceiver_sensor_sub_id(ifindex, sensor):
+    """
+    Returns sub OID for transceiver sensor. Sub OID is calculated as folows:
+    sub OID = transceiver_oid + XCVR_SENSOR_PART_ID_MAP[sensor]
+    :param ifindex: interface index
+    :param sensor: sensor key
+    :return: sub OID = {{index}} * 1000 + {{lane}} * 10 + sensor id
+    """
+
+    transceiver_oid, = get_transceiver_sub_id(ifindex)
+    return (transceiver_oid + XCVR_SENSOR_PART_ID_MAP[sensor],)