Lotus58 glow

keyboards/tweetydabird/lotus58/config.h

@@ -0,0 +1,14 @@
+// Copyright 2022 Markus Knutsson (@TweetyDaBird)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+// Options not yet fully implemented in info.json
+#define RGBLIGHT_LIMIT_VAL 175
+#define RGBLIGHT_DEFAULT_VAL ( RGBLIGHT_LIMIT_VAL / 2 )
+#define RGBLIGHT_SLEEP
+
+#define SPLIT_HAND_PIN B5
+#define SPLIT_LAYER_STATE_ENABLE
+#define SPLIT_LED_STATE_ENABLE
+#define SPLIT_OLED_ENABLE

keyboards/tweetydabird/lotus58/elite_c/info.json

@@ -0,0 +1,3 @@
+{
+	"bootloader": "atmel-dfu",
+ }

keyboards/tweetydabird/lotus58/info.json

@@ -0,0 +1,145 @@
+{
+    "manufacturer": "Tweetys Wild Thinking",
+    "keyboard_name": "Lotus 58 Glow (QMK)",
+    "maintainer": "TweetyDaBird",
+    "bootloader_instructions": "Short marked pads on PCB, or hold top-outer key when plugging in each hand.",
+    "build": {
+        "lto": true
+    },
+   "diode_direction": "COL2ROW",
+    "encoder": {
+        "rotary": [
+            {
+                "pin_a": "F5",
+                "pin_b": "F4",
+                "resolution": 2
+            }
+        ]
+    },
+    "features": {
+        "bootmagic": true,
+        "command": false,
+        "console": false,
+        "encoder": true,
+        "extrakey": true,
+        "mousekey": true,
+        "nkro": true,
+        "oled": true,
+        "rgblight": true,
+        "split": true,
+	"tri_layer": true
+    },
+    "matrix_pins": {
+        "cols": ["B1", "B2", "B3", "B6", "F7", "F6"],
+        "rows": ["D4", "C6", "D7", "E6", "B4"]
+    },
+    "pin_compatible": "promicro",
+    "processor": "atmega32u4",
+    "rgblight": {
+        "led_count": 70,
+        "pin": "D3",
+        "split": true,
+        "split_count": [35, 35]
+    },
+    "split": {
+		"bootmagic": {
+            "matrix": [5, 0]
+        },
+		"enabled": true,
+        "encoder": {
+            "right": {
+                "rotary": [
+                    {
+                        "pin_a": "F4",
+                        "pin_b": "F5",
+                        "resolution": 2
+                    }
+                ]
+            }
+        },
+        "soft_serial_pin": "D2",
+        "transport": {
+            "protocol": "serial",
+            "sync_matrix_state": true,
+            "sync_modifiers": true
+        },
+        "usb_detect": {
+            "enabled": true,
+            "polling_interval": 10,
+            "timeout": 2000
+        }
+    },
+    "url": "https://lectronz.com/stores/tweetys-wild-thinking",
+    "usb": {
+        "device_version": "1.2.3",
+        "force_nkro": true,
+        "pid": "0x23B0",
+        "vid": "0xFEED"
+    },
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                { "label": "Esc", "matrix": [0, 0], "x": 0, "y": 0.75 },
+                { "label": "1", "matrix": [0, 1], "x": 1, "y": 0.5 },
+                { "label": "2", "matrix": [0, 2], "x": 2, "y": 0.25 },
+                { "label": "3", "matrix": [0, 3], "x": 3, "y": 0 },
+                { "label": "4", "matrix": [0, 4], "x": 4, "y": 0.25 },
+                { "label": "5", "matrix": [0, 5], "x": 5, "y": 0.5 },
+                { "label": "Left ENC", "matrix": [4, 0], "x": 6.25, "y": 0.75 },
+                { "label": "Right ENC", "matrix": [9, 0], "x": 7.75, "y": 0.75 },
+                { "label": "6", "matrix": [5, 5], "x": 9, "y": 0.5 },
+                { "label": "7", "matrix": [5, 4], "x": 10, "y": 0.25 },
+                { "label": "8", "matrix": [5, 3], "x": 11, "y": 0 },
+                { "label": "9", "matrix": [5, 2], "x": 12, "y": 0.25 },
+                { "label": "0", "matrix": [5, 1], "x": 13, "y": 0.5 },
+                { "label": "-", "matrix": [5, 0], "x": 14, "y": 0.75 },
+                { "label": "Tab", "matrix": [1, 0], "x": 0, "y": 1.75 },
+                { "label": "Q", "matrix": [1, 1], "x": 1, "y": 1.5 },
+                { "label": "W", "matrix": [1, 2], "x": 2, "y": 1.25 },
+                { "label": "E", "matrix": [1, 3], "x": 3, "y": 1 },
+                { "label": "R", "matrix": [1, 4], "x": 4, "y": 1.25 },
+                { "label": "T", "matrix": [1, 5], "x": 5, "y": 1.5 },
+                { "label": "Y", "matrix": [6, 5], "x": 9, "y": 1.5 },
+                { "label": "U", "matrix": [6, 4], "x": 10, "y": 1.25 },
+                { "label": "I", "matrix": [6, 3], "x": 11, "y": 1 },
+                { "label": "O", "matrix": [6, 2], "x": 12, "y": 1.25 },
+                { "label": "P", "matrix": [6, 1], "x": 13, "y": 1.5 },
+                { "label": "{", "matrix": [6, 0], "x": 14, "y": 1.75 },
+                { "label": "Caps Lock", "matrix": [2, 0], "x": 0, "y": 2.75 },
+                { "label": "A", "matrix": [2, 1], "x": 1, "y": 2.5 },
+                { "label": "S", "matrix": [2, 2], "x": 2, "y": 2.25 },
+                { "label": "D", "matrix": [2, 3], "x": 3, "y": 2 },
+                { "label": "F", "matrix": [2, 4], "x": 4, "y": 2.25 },
+                { "label": "G", "matrix": [2, 5], "x": 5, "y": 2.5 },
+                { "label": "H", "matrix": [7, 5], "x": 9, "y": 2.5 },
+                { "label": "J", "matrix": [7, 4], "x": 10, "y": 2.25 },
+                { "label": "K", "matrix": [7, 3], "x": 11, "y": 2 },
+                { "label": "L", "matrix": [7, 2], "x": 12, "y": 2.25 },
+                { "label": ":", "matrix": [7, 1], "x": 13, "y": 2.5 },
+                { "label": "\"", "matrix": [7, 0], "x": 14, "y": 2.75 },
+                { "label": "L_Ctrl", "matrix": [3, 0], "x": 0, "y": 3.75 },
+                { "label": "Z", "matrix": [3, 1], "x": 1, "y": 3.5 },
+                { "label": "X", "matrix": [3, 2], "x": 2, "y": 3.25 },
+                { "label": "C", "matrix": [3, 3], "x": 3, "y": 3 },
+                { "label": "V", "matrix": [3, 4], "x": 4, "y": 3.25 },
+                { "label": "B", "matrix": [3, 5], "x": 5, "y": 3.5 },
+                { "label": "Down", "matrix": [4, 5], "x": 6, "y": 3 },
+                { "label": "Up", "matrix": [9, 5], "x": 8, "y": 3 },
+                { "label": "N", "matrix": [8, 5], "x": 9, "y": 3.5 },
+                { "label": "M", "matrix": [8, 4], "x": 10, "y": 3.25 },
+                { "label": ",", "matrix": [8, 3], "x": 11, "y": 3 },
+                { "label": ".", "matrix": [8, 2], "x": 12, "y": 3.25 },
+                { "label": "?", "matrix": [8, 1], "x": 13, "y": 3.5 },
+                { "label": "R_Ctrl", "matrix": [8, 0], "x": 14, "y": 3.75 },
+                { "label": "Win", "matrix": [4, 1], "x": 2.5, "y": 4.25 },
+                { "label": "Lower", "matrix": [4, 2], "x": 3.5, "y": 4.25 },
+                { "label": "Alt", "matrix": [4, 3], "x": 4.5, "y": 4.5 },
+                { "h": 1.25, "label": "Space", "matrix": [4, 4], "x": 6, "y": 4.25 },
+                { "h": 1.25, "label": "Enter", "matrix": [9, 4], "x": 8, "y": 4.25 },
+                { "label": "AltGr", "matrix": [9, 3], "x": 9.5, "y": 4.5 },
+                { "label": "Raise", "matrix": [9, 2], "x": 10.5, "y": 4.25 },
+                { "label": "BckSp", "matrix": [9, 1], "x": 11.5, "y": 4.25 }
+            ]
+        }
+    }
+}

keyboards/tweetydabird/lotus58/keymaps/default/keymap.c

@@ -0,0 +1,86 @@
+// Copyright 2022 Markus Knutsson (@TweetyDaBird)
+// SPDX-License-Identifier: GPL-2.0-or-later
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT(
+      KC_ESC, 	 KC_1, 	    KC_2,      KC_3,	   KC_4,     KC_5,  	KC_MPLY,      KC_MPLY,    KC_6,  	 KC_7,   	KC_8,       KC_9,      KC_0,    KC_MINS,
+      KC_TAB, 	 KC_Q, 	    KC_W,      KC_E,      KC_R,      KC_T,                     		       KC_Y,     KC_U,      KC_I,      KC_O,       KC_P,    KC_LBRC,
+      KC_CAPS, 	 KC_A, 	    KC_S,       KC_D,      KC_F,    KC_G,                     			   KC_H, 	 KC_J,      KC_K,       KC_L,    KC_SCLN,   KC_QUOT,
+LCTL_T(KC_LEFT), KC_Z, 	    KC_X,      KC_C,      KC_V,       KC_B,     KC_DOWN,       KC_UP,      KC_N,	KC_M,       KC_COMM,   KC_DOT,    KC_SLSH, RCTL_T(KC_RGHT),
+                                      KC_LGUI,   TG(2),   KC_LALT, LSFT_T(KC_SPC),RSFT_T(KC_ENT), KC_RALT, TG(1), MT(MOD_RGUI,KC_BSPC)
+),
+
+[1] = LAYOUT(
+  _______,   KC_F1,   KC_F2,    KC_F3,   KC_F4,   KC_F5,  _______,      _______, KC_CIRC,    KC_KP_7,    KC_KP_8,    KC_KP_9, XXXXXXX, XXXXXXX,
+  _______, XXXXXXX,   KC_UP,  XXXXXXX, XXXXXXX, XXXXXXX,                         KC_HASH,    KC_KP_4,    KC_KP_5,    KC_KP_6, XXXXXXX, XXXXXXX,
+  XXXXXXX, KC_LEFT, KC_DOWN, KC_RIGHT, KC_LBRC, KC_RBRC,                         KC_AMPR,    KC_KP_1,    KC_KP_2,    KC_KP_3, XXXXXXX, XXXXXXX,
+  _______, XXXXXXX, KC_PAST,  KC_PPLS, KC_PSLS,  KC_EQL, _______,       _______,  KC_DLR,    KC_KP_0, KC_KP_DOT, KC_COLN, KC_PMNS, _______,
+							  _______, _______, _______, _______,       _______, _______, _______, _______ 
+),
+
+[2] = LAYOUT(
+	  _______,   KC_F1,     KC_F2,     KC_F3,     KC_F4,     KC_F5,     _______,      _______,    KC_F6,    KC_F7,      KC_F8,     KC_F9,    KC_F10,    _______,
+     _______,   _______,   _______,   _______,   _______,   _______,                             _______,   _______,   _______,   _______,   _______,   _______,
+     _______,   _______,   _______,   _______,   _______,   _______,                             _______,   _______,   _______,   _______,   _______,   _______,
+     _______,   _______,   _______,   _______,   _______,   _______,    _______,      _______,   _______,   _______,   _______,   _______,   _______,   _______,
+            					      _______,   _______,   _______,  _______,         _______,  _______,   _______,   _______
+),
+
+[3] = LAYOUT(
+  XXXXXXX, XXXXXXX, XXXXXXX ,  XXXXXXX, XXXXXXX, XXXXXXX, _______,     _______, XXXXXXX, XXXXXXX, XXXXXXX, RGB_MOD, RGB_SAI, RGB_TOG,
+  QK_BOOT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                       XXXXXXX, XXXXXXX, XXXXXXX, RGB_RMOD, RGB_SAD, RGB_M_P,
+  XXXXXXX, XXXXXXX, XXXXXXX,   XXXXXXX, XXXXXXX, KC_CAPS,                       XXXXXXX, XXXXXXX, XXXXXXX, RGB_HUI, RGB_VAI, RGB_M_B,
+  XXXXXXX, XXXXXXX, XXXXXXX,   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,     XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RGB_HUD, RGB_VAD, RGB_M_R,
+								_______, _______, _______, _______,     _______, _______, _______, _______ 
+  )
+};
+
+#if defined(ENCODER_MAP_ENABLE)
+const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][2] = {
+    [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_VOLD, KC_VOLU) },
+    [1] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_VOLD, KC_VOLU) },
+    [2] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_VOLD, KC_VOLU) },
+    [3] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }
+};
+#endif
+
+#ifdef OLED_ENABLE
+static void print_status_narrow(void) {
+	// Create OLED content
+    oled_write_P(PSTR("\n"), false);
+	oled_write_P(PSTR(""), false);
+    oled_write_P(PSTR("Lotus -58-"), false);
+	oled_write_P(PSTR("\n"), false);
+
+    // Print current layer
+    oled_write_P(PSTR("Layer"), false);
+    switch (get_highest_layer(layer_state)) {
+        case 0:
+            oled_write_P(PSTR("-Base\n"), false);
+            break;
+        case 1:
+            oled_write_P(PSTR("-Num \n"), false);
+            break;
+        case 2:
+            oled_write_P(PSTR("-Func\n"), false);
+            break;
+        case 3:
+            oled_write_P(PSTR("-Sys \n"), false);
+            break;
+        default:
+            oled_write_P(PSTR("Undef"), false);
+    }
+
+    oled_write_P(PSTR("\n"), false);
+    led_t led_usb_state = host_keyboard_led_state();
+    oled_write_ln_P(PSTR("Caps- lock"), led_usb_state.caps_lock);
+
+}
+
+bool oled_task_user(void) {
+	// Render the OLED
+		print_status_narrow();
+	return false;
+}
+#endif

keyboards/tweetydabird/lotus58/keymaps/default/rules.mk

@@ -0,0 +1,2 @@
+ENCODER_MAP_ENABLE = yes
+AUTO_SHIFT_ENABLE = yes

keyboards/tweetydabird/lotus58/lotus58.c

@@ -0,0 +1,29 @@
+// Copyright 2022 Markus Knutsson (@TweetyDaBird)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "quantum.h"
+
+#ifdef OLED_ENABLE
+
+oled_rotation_t oled_init_kb(oled_rotation_t rotation) {
+        return OLED_ROTATION_90;
+}
+
+void render_logo(void) {
+	// QMK Logo
+    static const char PROGMEM qmk_logo[] = {
+        0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, 0x90, 0x91, 0x92, 0x93, 0x94,
+        0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, 0xA9, 0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0xAF, 0xB0, 0xB1, 0xB2, 0xB3, 0xB4,
+        0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xD1, 0xD2, 0xD3, 0xD4, 0x00
+    };
+    oled_write_P(qmk_logo, false);
+}
+
+bool oled_task_kb(void) {
+        if (!oled_task_user()) {
+                return false;
+        }
+        render_logo();
+        return false;
+}
+#endif

keyboards/tweetydabird/lotus58/nanoboot/rules.mk

@@ -0,0 +1,2 @@
+BOOTLOADER = qmk-hid
+BOOTLOADER_SIZE = 512

keyboards/tweetydabird/lotus58/promicro/info.json

@@ -0,0 +1,3 @@
+{
+    "bootloader": "caterina",
+}

keyboards/tweetydabird/lotus58/readme.md

@@ -0,0 +1,37 @@
+# Lotus 58 Glow
+
+![lotus58](https://i.imgur.com/WWgpp0Sh.jpeg)
+
+* Lotus 58 Glow is a fully programmable 58-key split, ortho-columnar keyboard with a 4x6 main matrix and 4+1 thumb-keys per hand. Optional support for one OLED screen per hand/side showing information such as active layer, CapsLock/NumLock etc. as well as one Rotary Encoder per hand, with optional placement.
+
+* Keyboard Maintainer: [TweetyDaBird](https://github.com/TweetyDaBird)
+* Hardware Supported: *Lotus 58 Glow v1.11 - 1.2x PCB, Pro Micro or pin-compatible*
+* Hardware Availability: [Lectronz Store](https://lectronz.com/stores/tweetys-wild-thinking)
+* Hardware Design: [GitHub](https://github.com/TweetyDaBird/Lotus58)
+
+
+#### This keyboard firmware contains three different versions, all for the same PCB/hardware, but depending on your choice of controller/bootloader. 
+
+
+* promicro - This uses the default Caterina bootloader.
+* elite_c - This uses the Atmel-DFU bootloader.
+* nanoBoot - A tiny 512 byte bootloader giving far more usable memory for features (can be used on both Elite C and Pro Micro).
+
+
+Make example for this keyboard (after setting up your build environment):
+
+    make tweetydabird/lotus58/promicro:default
+
+Flashing example for this keyboard:
+
+    make tweetydabird/lotus58/elite_c:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the top outer key for each hand as it is plugged in
+* **Physical reset**: Briefly short the marked pads on PCB
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if mapped (not in default keymap)