fix(deps): update module go.etcd.io/etcd/api/v3 to v3.6.1

[renovate]

This PR contains the following updates:

Package	Change	Age	Adoption	Passing	Confidence
go.etcd.io/etcd/api/v3	v3.5.0 -> v3.6.1

---

Release Notes

etcd-io/etcd (go.etcd.io/etcd/api/v3)

v3.6.1

Compare Source

Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).

For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.

Linux

ETCD_VER=v3.6.1

### choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

### start a local etcd server
/tmp/etcd-download-test/etcd

### write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo

macOS (Darwin)

ETCD_VER=v3.6.1

### choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

Docker

etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.

ETCD_VER=v3.6.1

rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
  docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
  docker run \
  -p 2379:2379 \
  -p 2380:2380 \
  --mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
  --name etcd-gcr-${ETCD_VER} \
  gcr.io/etcd-development/etcd:${ETCD_VER} \
  /usr/local/bin/etcd \
  --name s1 \
  --data-dir /etcd-data \
  --listen-client-urls http://0.0.0.0:2379 \
  --advertise-client-urls http://0.0.0.0:2379 \
  --listen-peer-urls http://0.0.0.0:2380 \
  --initial-advertise-peer-urls http://0.0.0.0:2380 \
  --initial-cluster s1=http://0.0.0.0:2380 \
  --initial-cluster-token tkn \
  --initial-cluster-state new \
  --log-level info \
  --logger zap \
  --log-outputs stderr

docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo

v3.6.0

Compare Source

Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).

For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.

Linux

ETCD_VER=v3.6.0

### choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

### start a local etcd server
/tmp/etcd-download-test/etcd

### write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo

macOS (Darwin)

ETCD_VER=v3.6.0

### choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

Docker

etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.

ETCD_VER=v3.6.0

rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
  docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
  docker run \
  -p 2379:2379 \
  -p 2380:2380 \
  --mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
  --name etcd-gcr-${ETCD_VER} \
  gcr.io/etcd-development/etcd:${ETCD_VER} \
  /usr/local/bin/etcd \
  --name s1 \
  --data-dir /etcd-data \
  --listen-client-urls http://0.0.0.0:2379 \
  --advertise-client-urls http://0.0.0.0:2379 \
  --listen-peer-urls http://0.0.0.0:2380 \
  --initial-advertise-peer-urls http://0.0.0.0:2380 \
  --initial-cluster s1=http://0.0.0.0:2380 \
  --initial-cluster-token tkn \
  --initial-cluster-state new \
  --log-level info \
  --logger zap \
  --log-outputs stderr

docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo

v3.5.21

Compare Source

Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).

For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.

Linux

ETCD_VER=v3.5.21

### choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

### start a local etcd server
/tmp/etcd-download-test/etcd

### write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo

macOS (Darwin)

ETCD_VER=v3.5.21

### choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

Docker

etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.

ETCD_VER=v3.5.21

rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
  docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
  docker run \
  -p 2379:2379 \
  -p 2380:2380 \
  --mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
  --name etcd-gcr-${ETCD_VER} \
  gcr.io/etcd-development/etcd:${ETCD_VER} \
  /usr/local/bin/etcd \
  --name s1 \
  --data-dir /etcd-data \
  --listen-client-urls http://0.0.0.0:2379 \
  --advertise-client-urls http://0.0.0.0:2379 \
  --listen-peer-urls http://0.0.0.0:2380 \
  --initial-advertise-peer-urls http://0.0.0.0:2380 \
  --initial-cluster s1=http://0.0.0.0:2380 \
  --initial-cluster-token tkn \
  --initial-cluster-state new \
  --log-level info \
  --logger zap \
  --log-outputs stderr

docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo

v3.5.20

Compare Source

Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).

For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.

Linux

ETCD_VER=v3.5.20

### choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

### start a local etcd server
/tmp/etcd-download-test/etcd

### write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo

macOS (Darwin)

ETCD_VER=v3.5.20

### choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

Docker

etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.

ETCD_VER=v3.5.20

rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
  docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
  docker run \
  -p 2379:2379 \
  -p 2380:2380 \
  --mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
  --name etcd-gcr-${ETCD_VER} \
  gcr.io/etcd-development/etcd:${ETCD_VER} \
  /usr/local/bin/etcd \
  --name s1 \
  --data-dir /etcd-data \
  --listen-client-urls http://0.0.0.0:2379 \
  --advertise-client-urls http://0.0.0.0:2379 \
  --listen-peer-urls http://0.0.0.0:2380 \
  --initial-advertise-peer-urls http://0.0.0.0:2380 \
  --initial-cluster s1=http://0.0.0.0:2380 \
  --initial-cluster-token tkn \
  --initial-cluster-state new \
  --log-level info \
  --logger zap \
  --log-outputs stderr

docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo

v3.5.19

Compare Source

Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).

For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.

Linux

ETCD_VER=v3.5.19

### choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

### start a local etcd server
/tmp/etcd-download-test/etcd

### write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo

macOS (Darwin)

ETCD_VER=v3.5.19

### choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

Docker

etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.

ETCD_VER=v3.5.19

rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
  docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
  docker run \
  -p 2379:2379 \
  -p 2380:2380 \
  --mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
  --name etcd-gcr-${ETCD_VER} \
  gcr.io/etcd-development/etcd:${ETCD_VER} \
  /usr/local/bin/etcd \
  --name s1 \
  --data-dir /etcd-data \
  --listen-client-urls http://0.0.0.0:2379 \
  --advertise-client-urls http://0.0.0.0:2379 \
  --listen-peer-urls http://0.0.0.0:2380 \
  --initial-advertise-peer-urls http://0.0.0.0:2380 \
  --initial-cluster s1=http://0.0.0.0:2380 \
  --initial-cluster-token tkn \
  --initial-cluster-state new \
  --log-level info \
  --logger zap \
  --log-outputs stderr

docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo

v3.5.18

Compare Source

Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).

For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.

Linux

ETCD_VER=v3.5.18

### choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

### start a local etcd server
/tmp/etcd-download-test/etcd

### write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo

macOS (Darwin)

ETCD_VER=v3.5.18

### choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

Docker

etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.

ETCD_VER=v3.5.18

rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
  docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
  docker run \
  -p 2379:2379 \
  -p 2380:2380 \
  --mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
  --name etcd-gcr-${ETCD_VER} \
  gcr.io/etcd-development/etcd:${ETCD_VER} \
  /usr/local/bin/etcd \
  --name s1 \
  --data-dir /etcd-data \
  --listen-client-urls http://0.0.0.0:2379 \
  --advertise-client-urls http://0.0.0.0:2379 \
  --listen-peer-urls http://0.0.0.0:2380 \
  --initial-advertise-peer-urls http://0.0.0.0:2380 \
  --initial-cluster s1=http://0.0.0.0:2380 \
  --initial-cluster-token tkn \
  --initial-cluster-state new \
  --log-level info \
  --logger zap \
  --log-outputs stderr

docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo

v3.5.17

Compare Source

Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).

For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.

Linux

ETCD_VER=v3.5.17

### choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

### start a local etcd server
/tmp/etcd-download-test/etcd

### write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo

macOS (Darwin)

ETCD_VER=v3.5.17

### choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

Docker

etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.

ETCD_VER=v3.5.17

rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
  docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
  docker run \
  -p 2379:2379 \
  -p 2380:2380 \
  --mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
  --name etcd-gcr-${ETCD_VER} \
  gcr.io/etcd-development/etcd:${ETCD_VER} \
  /usr/local/bin/etcd \
  --name s1 \
  --data-dir /etcd-data \
  --listen-client-urls http://0.0.0.0:2379 \
  --advertise-client-urls http://0.0.0.0:2379 \
  --listen-peer-urls http://0.0.0.0:2380 \
  --initial-advertise-peer-urls http://0.0.0.0:2380 \
  --initial-cluster s1=http://0.0.0.0:2380 \
  --initial-cluster-token tkn \
  --initial-cluster-state new \
  --log-level info \
  --logger zap \
  --log-outputs stderr

docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo

v3.5.16

Compare Source

Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).

For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.

Linux

ETCD_VER=v3.5.16

### choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

### start a local etcd server
/tmp/etcd-download-test/etcd

### write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo

macOS (Darwin)

ETCD_VER=v3.5.16

### choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

Docker

etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.

rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
  docker rmi gcr.io/etcd-development/etcd:v3.5.16 || true && \
  docker run \
  -p 2379:2379 \
  -p 2380:2380 \
  --mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
  --name etcd-gcr-v3.5.16 \
  gcr.io/etcd-development/etcd:v3.5.16 \
  /usr/local/bin/etcd \
  --name s1 \
  --data-dir /etcd-data \
  --listen-client-urls http://0.0.0.0:2379 \
  --advertise-client-urls http://0.0.0.0:2379 \
  --listen-peer-urls http://0.0.0.0:2380 \
  --initial-advertise-peer-urls http://0.0.0.0:2380 \
  --initial-cluster s1=http://0.0.0.0:2380 \
  --initial-cluster-token tkn \
  --initial-cluster-state new \
  --log-level info \
  --logger zap \
  --log-outputs stderr

docker exec etcd-gcr-v3.5.16 /usr/local/bin/etcd --version
docker exec etcd-gcr-v3.5.16 /usr/local/bin/etcdctl version
docker exec etcd-gcr-v3.5.16 /usr/local/bin/etcdutl version
docker exec etcd-gcr-v3.5.16 /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-v3.5.16 /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-v3.5.16 /usr/local/bin/etcdctl get foo

v3.5.15

Compare Source

Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).

For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.

Linux

ETCD_VER=v3.5.15

### choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

### start a local etcd server
/tmp/etcd-download-test/etcd

### write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo

macOS (Darwin)

ETCD_VER=v3.5.15

### choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

Docker

etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.

rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
  docker rmi gcr.io/etcd-development/etcd:v3.5.15 || true && \
  docker run \
  -p 2379:2379 \
  -p 2380:2380 \
  --mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
  --name etcd-gcr-v3.5.15 \
  gcr.io/etcd-development/etcd:v3.5.15 \
  /usr/local/bin/etcd \
  --name s1 \
  --data-dir /etcd-data \
  --listen-client-urls http://0.0.0.0:2379 \
  --advertise-client-urls http://0.0.0.0:2379 \
  --listen-peer-urls http://0.0.0.0:2380 \
  --initial-advertise-peer-urls http://0.0.0.0:2380 \
  --initial-cluster s1=http://0.0.0.0:2380 \
  --initial-cluster-token tkn \
  --initial-cluster-state new \
  --log-level info \
  --logger zap \
  --log-outputs stderr

docker exec etcd-gcr-v3.5.15 /usr/local/bin/etcd --version
docker exec etcd-gcr-v3.5.15 /usr/local/bin/etcdctl version
docker exec etcd-gcr-v3.5.15 /usr/local/bin/etcdutl version
docker exec etcd-gcr-v3.5.15 /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-v3.5.15 /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-v3.5.15 /usr/local/bin/etcdctl get foo

v3.5.14

Compare Source

Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).

For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.

Linux

ETCD_VER=v3.5.14

### choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

### start a local etcd server
/tmp/etcd-download-test/etcd

### write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo

macOS (Darwin)

ETCD_VER=v3.5.14

### choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

Docker

etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.

rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
  docker rmi gcr.io/etcd-development/etcd:v3.5.14 || true && \
  docker run \
  -p 2379:2379 \
  -p 2380:2380 \
  --mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
  --name etcd-gcr-v3.5.14 \
  gcr.io/etcd-development/etcd:v3.5.14 \
  /usr/local/bin/etcd \
  --name s1 \
  --data-dir /etcd-data \
  --listen-client-urls http://0.0.0.0:2379 \
  --advertise-client-urls http://0.0.0.0:2379 \
  --listen-peer-urls http://0.0.0.0:2380 \
  --initial-advertise-peer-urls http://0.0.0.0:2380 \
  --initial-cluster s1=http://0.0.0.0:2380 \
  --initial-cluster-token tkn \
  --initial-cluster-state new \
  --log-level info \
  --logger zap \
  --log-outputs stderr

docker exec etcd-gcr-v3.5.14 /usr/local/bin/etcd --version
docker exec etcd-gcr-v3.5.14 /usr/local/bin/etcdctl version
docker exec etcd-gcr-v3.5.14 /usr/local/bin/etcdutl version
docker exec etcd-gcr-v3.5.14 /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-v3.5.14 /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-v3.5.14 /usr/local/bin/etcdctl get foo

v3.5.13

Compare Source

Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).

For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.

Linux

ETCD_VER=v3.5.13

### choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

### start a local etcd server
/tmp/etcd-download-test/etcd

### write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo

macOS (Darwin)

ETCD_VER=v3.5.13

### choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

Docker

etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.

rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
  docker rmi gcr.io/etcd-development/etcd:v3.5.13 || true && \
  docker run \
  -p 2379:2379 \
  -p 2380:2380 \
  --mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
  --name etcd-gcr-v3.5.13 \
  gcr.io/etcd-development/etcd:v3.5.13 \
  /usr/local/bin/etcd \
  --name s1 \
  --data-dir /etcd-data \
  --listen-client-urls http://0.0.0.0:2379 \
  --advertise-client-urls http://0.0.0.0:2379 \
  --listen-peer-urls http://0.0.0.0:2380 \
  --initial-advertise-peer-urls http://0.0.0.0:2380 \
  --initial-cluster s1=http://0.0.0.0:2380 \
  --initial-cluster-token tkn \
  --initial-cluster-state new \
  --log-level info \
  --logger zap \
  --log-outputs stderr

docker exec etcd-gcr-v3.5.13 /usr/local/bin/etcd --version
docker exec etcd-gcr-v3.5.13 /usr/local/bin/etcdctl version
docker exec etcd-gcr-v3.5.13 /usr/local/bin/etcdutl version
docker exec etcd-gcr-v3.5.13 /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-v3.5.13 /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-v3.5.13 /usr/local/bin/etcdctl get foo

v3.5.12

Compare Source

Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).

For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.

Linux

ETCD_VER=v3.5.12

### choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

### start a local etcd server
/tmp/etcd-download-test/etcd

### write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo

macOS (Darwin)

ETCD_VER=v3.5.12

### choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

Docker

etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.

rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
  docker rmi gcr.io/etcd-development/etcd:v3.5.12 || true && \
  docker run \
  -p 2379:2379 \
  -p 2380:2380 \
  --mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
  --name etcd-gcr-v3.5.12 \
  gcr.io/etcd-development/etcd:v3.5.12 \
  /usr/local/bin/etcd \
  --name s1 \
  --data-dir /etcd-data \
  --listen-client-urls http://0.0.0.0:2379 \
  --advertise-client-urls http://0.0.0.0:2379 \
  --listen-peer-urls http://0.0.0.0:2380 \
  --initial-advertise-peer-urls http://0.0.0.0:2380 \
  --initial-cluster s1=http://0.0.0.0:2380 \
  --initial-cluster-token tkn \
  --initial-cluster-state new \
  --log-level info \
  --logger zap \
  --log-outputs stderr

docker exec etcd-gcr-v3.5.12 /usr/local/bin/etcd --version
docker exec etcd-gcr-v3.5.12 /usr/local/bin/etcdctl version
docker exec etcd-gcr-v3.5.12 /usr/local/bin/etcdutl version
docker exec etcd-gcr-v3.5.12 /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-v3.5.12 /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-v3.5.12 /usr/local/bin/etcdctl get foo

v3.5.11

Compare Source

Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).

For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.

Linux

ETCD_VER=v3.5.11

### choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

### start a local etcd server
/tmp/etcd-download-test/etcd

### write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo

macOS (Darwin)

ETCD_VER=v3.5.11

### choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

Docker

etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.

rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
  docker rmi gcr.io/etcd-development/etcd:v3.5.11 || true && \
  docker run \
  -p 2379:2379 \
  -p 2380:2380 \
  --mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
  --name etcd-gcr-v3.5.11 \
  gcr.io/etcd-development/etcd:v3.5.11 \
  /usr/local/bin/etcd \
  --name s1 \
  --data-dir /etcd-data \
  --listen-client-urls http://0.0.0.0:2379 \
  --advertise-client-urls http://0.0.0.0:2379 \
  --listen-peer-urls http://0.0.0.0:2380 \
  --initial-advertise-peer-urls http://0.0.0.0:2380 \
  --initial-cluster s1=http://0.0.0.0:2380 \
  --initial-cluster-token tkn \
  --initial-cluster-state new \
  --log-level info \
  --logger zap \
  --log-outputs stderr

docker exec etcd-gcr-v3.5.11 /usr/local/bin/etcd --version
docker exec etcd-gcr-v3.5.11 /usr/local/bin/etcdctl version
docker exec etcd-gcr-v3.5.11 /usr/local/bin/etcdutl version
docker exec etcd-gcr-v3.5.11 /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-v3.5.11 /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-v3.5.11 /usr/local/bin/etcdctl get foo

v3.5.10

Compare Source

Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).

For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.

Linux

ETCD_VER=v3.5.10

### choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

### start a local etcd server
/tmp/etcd-download-test/etcd

### write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo

macOS (Darwin)

ETCD_VER=v3.5.10

### choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

Docker

etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.

rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
  docker rmi gcr.io/etcd-development/etcd:v3.5.10 || true && \
  docker run \
  -p 2379:2379 \
  -p 2380:2380 \
  --mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
  --name etcd-gcr-v3.5.10 \
  gcr.io/etcd-development/etcd:v3.5.10 \
  /usr/local/bin/etcd \
  --name s1 \
  --data-dir /etcd-data \
  --listen-client-urls http://0.0.0.0:2379 \
  --advertise-client-urls http://0.0.0.0:2379 \
  --listen-peer-urls http://0.0.0.0:2380 \
  --initial-advertise-peer-urls http://0.0.0.0:2380 \
  --initial-cluster s1=http://0.0.0.0:2380 \
  --initial-cluster-token tkn \
  --initial-cluster-state new \
  --log-level info \
  --logger zap \
  --log-outputs stderr

docker exec etcd-gcr-v3.5.10 /usr/local/bin/etcd --version
docker exec etcd-gcr-v3.5.10 /usr/local/bin/etcdctl version
docker exec etcd-gcr-v3.5.10 /usr/local/bin/etcdutl version
docker exec etcd-gcr-v3.5.10 /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-v3.5.10 /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-v3.5.10 /usr/local/bin/etcdctl get foo

v3.5.9

Compare Source

Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).

For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.

Linux

ETCD_VER=v3.5.9

### choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

### start a local etcd server
/tmp/etcd-download-test/etcd

### write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo

macOS (Darwin)

ETCD_VER=v3.5.9

### choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

Docker

etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.

rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
  docker rmi gcr.io/etcd-development/etcd:v3.5.9 || true && \
  docker run \
  -p 2379:2379 \
  -p 2380:2380 \
  --mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
  --name etcd-gcr-v3.5.9 \
  gcr.io/etcd-development/etcd:v3.5.9 \
  /usr/local/bin/etcd \
  --name s1 \
  --data-dir /etcd-data \
  --listen-client-urls http://0.0.0.0:2379 \
  --advertise-client-urls http://0.0.0.0:2379 \
  --listen-peer-urls http://0.0.0.0:2380 \
  --initial-advertise-peer-urls http://0.0.0.0:2380 \
  --initial-cluster s1=http://0.0.0.0:2380 \
  --initial-cluster-token tkn \
  --initial-cluster-state new \
  --log-level info \
  --logger zap \
  --log-outputs stderr

docker exec etcd-gcr-v3.5.9 /usr/local/bin/etcd --version
docker exec etcd-gcr-v3.5.9 /usr/local/bin/etcdctl version
docker exec etcd-gcr-v3.5.9 /usr/local/bin/etcdutl version
docker exec etcd-gcr-v3.5.9 /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-v3.5.9 /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-v3.5.9 /usr/local/bin/etcdctl get foo

v3.5.8

[Comp

---

Configuration

📅 Schedule: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined).

🚦 Automerge: Disabled by config. Please merge this manually once you are satisfied.

♻ Rebasing: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox.

🔕 Ignore: Close this PR and you won't be reminded about this update again.

---

• If you want to rebase/retry this PR, check this box

---

This PR was generated by Mend Renovate. View the repository job log.

[renovate]

ℹ Artifact update notice

File name: go.mod

In order to perform the update(s) described in the table above, Renovate ran the go get command, which resulted in the following additional change(s):

• 3 additional dependencies were updated
• The go directive was updated for compatibility reasons

Details:

Package	Change
go	1.16 -> 1.23.0
golang.org/x/crypto	v0.0.0-20210921155107-089bfa567519 -> v0.36.0
golang.org/x/sys	v0.0.0-20211007075335-d3039528d8ac -> v0.31.0
golang.org/x/time	v0.0.0-20210723032227-1f47c861a9ac -> v0.3.0

[renovate]

⚠️ Artifact update problem

Renovate failed to update an artifact related to this branch. You probably do not want to merge this PR as-is.

♻ Renovate will retry this branch, including artifacts, only when one of the following happens:

• any of the package files in this branch needs updating, or
• the branch becomes conflicted, or
• you click the rebase/retry checkbox if found above, or
• you rename this PR's title to start with "rebase!" to trigger it manually

The artifact failure details are included below:

File name: go.sum

Command failed: go get -d -t ./...
go: -d flag is deprecated. -d=true is a no-op
go: downloading github.com/spf13/afero v1.10.0
go: downloading golang.org/x/time v0.5.0
go: downloading gopkg.in/yaml.v2 v2.4.0
go: downloading github.com/aws/aws-sdk-go v1.41.1
go: downloading github.com/coredhcp/coredhcp v0.0.0-20211012092557-3e75f3b9c460
go: downloading github.com/coreos/go-systemd/v22 v22.3.2
go: downloading github.com/coreos/go-systemd v0.0.0-20190321100706-95778dfbb74e
go: downloading github.com/cyphar/filepath-securejoin v0.2.3
go: downloading github.com/deniswernert/go-fstab v0.0.0-20141204152952-eb4090f26517
go: downloading github.com/docker/docker v20.10.9+incompatible
go: downloading github.com/docker/go-connections v0.4.0
go: downloading github.com/godbus/dbus/v5 v5.0.5
go: downloading github.com/hashicorp/consul/api v1.11.0
go: downloading github.com/insomniacslk/dhcp v0.0.0-20210827173440-b95caade3eac
go: downloading github.com/libvirt/libvirt-go v7.4.0+incompatible
go: downloading github.com/libvirt/libvirt-go-xml v7.4.0+incompatible
go: downloading github.com/pin/tftp v0.0.0-20210809155059-0161c5dd2e96
go: downloading github.com/pkg/errors v0.9.1
go: downloading github.com/vishvananda/netlink v1.1.1-0.20201029203352-d40f9887b852
go: downloading golang.org/x/sys v0.31.0
go: downloading honnef.co/go/augeas v0.0.0-20161110001225-ca62e35ed6b8
go: downloading go.etcd.io/etcd/api/v3 v3.6.1
go: downloading go.etcd.io/etcd/client/pkg/v3 v3.5.0
go: downloading go.etcd.io/etcd/client/v3 v3.5.0
go: downloading go.etcd.io/etcd/server/v3 v3.5.0
go: downloading github.com/urfave/cli/v2 v2.3.0
go: downloading github.com/kylelemons/godebug v1.1.0
go: downloading gopkg.in/src-d/go-git.v4 v4.13.1
go: downloading github.com/davecgh/go-spew v1.1.1
go: downloading github.com/iancoleman/strcase v0.3.0
go: downloading github.com/hashicorp/hil v0.0.0-20210521165536-27a72121fd40
go: downloading github.com/sanity-io/litter v1.5.1
go: downloading github.com/pborman/uuid v1.2.1
go: downloading golang.org/x/crypto v0.36.0
go: downloading github.com/prometheus/client_golang v1.11.0
go: downloading github.com/fsnotify/fsnotify v1.5.1
go: downloading github.com/hashicorp/go-multierror v1.1.1
go: downloading golang.org/x/text v0.23.0
go: downloading github.com/docker/go-units v0.4.0
go: downloading github.com/opencontainers/image-spec v1.0.1
go: downloading github.com/containerd/containerd v1.4.9
go: downloading github.com/docker/distribution v2.7.1+incompatible
go: downloading github.com/opencontainers/go-digest v1.0.0
go: downloading github.com/hashicorp/go-cleanhttp v0.5.1
go: downloading github.com/hashicorp/go-hclog v0.12.0
go: downloading github.com/hashicorp/go-rootcerts v1.0.2
go: downloading github.com/hashicorp/serf v0.9.5
go: downloading github.com/mitchellh/mapstructure v1.4.1
go: downloading github.com/u-root/uio v0.0.0-20210528114334-82958018845c
go: downloading golang.org/x/net v0.38.0
go: downloading github.com/vishvananda/netns v0.0.0-20210104183010-2eb08e3e575f
go: downloading github.com/gogo/protobuf v1.3.2
go: downloading github.com/golang/protobuf v1.5.4
go: downloading github.com/grpc-ecosystem/grpc-gateway/v2 v2.26.3
go: downloading github.com/grpc-ecosystem/grpc-gateway v1.16.0
go: downloading google.golang.org/genproto/googleapis/api v0.0.0-20250303144028-a0af3efb3deb
go: downloading google.golang.org/genproto v0.0.0-20240213162025-012b6fc9bca9
go: downloading google.golang.org/grpc v1.71.1
go: downloading go.uber.org/zap v1.17.0
go: downloading github.com/grpc-ecosystem/go-grpc-prometheus v1.2.0
go: downloading github.com/soheilhy/cmux v0.1.5
go: downloading github.com/tmc/grpc-websocket-proxy v0.0.0-20201229170055-e5319fda7802
go: downloading go.etcd.io/bbolt v1.3.6
go: downloading go.etcd.io/etcd/pkg/v3 v3.5.0
go: downloading go.opentelemetry.io/contrib/instrumentation/google.golang.org/grpc/otelgrpc v0.49.0
go: downloading go.opentelemetry.io/contrib v0.20.0
go: downloading go.opentelemetry.io/otel/exporters/otlp v0.20.0
go: downloading go.opentelemetry.io/otel v1.34.0
go: downloading go.opentelemetry.io/otel/sdk v1.34.0
go: downloading go.uber.org/multierr v1.6.0
go: downloading gopkg.in/natefinch/lumberjack.v2 v2.0.0
go: downloading sigs.k8s.io/yaml v1.2.0
go: downloading github.com/mdlayher/ethernet v0.0.0-20190606142754-0394541c37b7
go: downloading github.com/mdlayher/raw v0.0.0-20191009151244-50f2db8cc065
go: downloading github.com/cpuguy83/go-md2man/v2 v2.0.0
go: downloading github.com/sergi/go-diff v1.0.0
go: downloading gopkg.in/src-d/go-billy.v4 v4.3.2
go: downloading github.com/mitchellh/reflectwalk v1.0.0
go: downloading github.com/google/uuid v1.6.0
go: downloading github.com/beorn7/perks v1.0.1
go: downloading github.com/cespare/xxhash/v2 v2.3.0
go: downloading github.com/cespare/xxhash v1.1.0
go: downloading github.com/prometheus/client_model v0.6.1
go: downloading github.com/prometheus/common v0.26.0
go: downloading github.com/prometheus/procfs v0.6.0
go: downloading github.com/hashicorp/errwrap v1.0.0
go: downloading github.com/jmespath/go-jmespath v0.4.0
go: downloading github.com/sirupsen/logrus v1.8.1
go: downloading github.com/Microsoft/go-winio v0.4.17
go: downloading github.com/fatih/color v1.15.0
go: downloading github.com/mattn/go-colorable v0.1.13
go: downloading github.com/mattn/go-isatty v0.0.19
go: downloading github.com/mitchellh/go-homedir v1.1.0
go: downloading github.com/armon/go-metrics v0.0.0-20180917152333-f0300d1749da
go: downloading google.golang.org/protobuf v1.36.5
go: downloading google.golang.org/genproto/googleapis/rpc v0.0.0-20250303144028-a0af3efb3deb
go: downloading go.uber.org/atomic v1.7.0
go: downloading github.com/coreos/go-semver v0.3.1
go: downloading github.com/gorilla/websocket v1.4.2
go: downloading github.com/spf13/pflag v1.0.6-0.20201009195203-85dd5c8bc61c
go: downloading github.com/dustin/go-humanize v1.0.1
go: downloading go.etcd.io/etcd/raft/v3 v3.5.0
go: downloading github.com/xiang90/probing v0.0.0-20190116061207-43a291ad63a2
go: downloading github.com/jonboulle/clockwork v0.2.2
go: downloading github.com/grpc-ecosystem/go-grpc-middleware v1.3.0
go: downloading go.opentelemetry.io/otel/metric v1.34.0
go: downloading go.opentelemetry.io/otel/trace v1.34.0
go: downloading go.opentelemetry.io/otel/sdk/export/metric v0.20.0
go: downloading go.opentelemetry.io/otel/sdk/metric v1.34.0
go: downloading go.opentelemetry.io/proto/otlp v1.0.0
go: downloading github.com/russross/blackfriday/v2 v2.0.1
go: downloading github.com/emirpasic/gods v1.12.0
go: downloading github.com/jbenet/go-context v0.0.0-20150711004518-d14ea06fba99
go: downloading github.com/matttproud/golang_protobuf_extensions v1.0.2-0.20181231171920-c182affec369
go: downloading github.com/hashicorp/go-immutable-radix v1.0.0
go: downloading github.com/form3tech-oss/jwt-go v3.2.3+incompatible
go: downloading go.etcd.io/etcd/client/v2 v2.305.0
go: downloading github.com/google/btree v1.0.1
go: downloading github.com/go-logr/logr v1.4.2
go: downloading github.com/go-logr/stdr v1.2.2
go: downloading go.opentelemetry.io/auto/sdk v1.1.0
go: downloading github.com/shurcooL/sanitized_anchor_name v1.0.0
go: downloading github.com/src-d/gcfg v1.4.0
go: downloading github.com/kevinburke/ssh_config v0.0.0-20190725054713-01f96b0aa0cd
go: downloading github.com/xanzy/ssh-agent v0.2.1
go: downloading github.com/hashicorp/golang-lru v0.5.1
go: downloading github.com/json-iterator/go v1.1.12
go: downloading github.com/modern-go/reflect2 v1.0.2
go: downloading gopkg.in/warnings.v0 v0.1.2
go: downloading github.com/modern-go/concurrent v0.0.0-20180306012644-bacd9c7ef1dd
go: downloading go.opentelemetry.io/otel/metric v1.36.0
go: downloading go.opentelemetry.io/otel v1.36.0
go: downloading go.opentelemetry.io v0.1.0
go: downloading go.opentelemetry.io/otel/sdk/metric v1.36.0
go: downloading go.opentelemetry.io/otel/sdk v1.36.0
go: github.com/purpleidea/mgmt/etcd imports
	go.etcd.io/etcd/server/v3/embed imports
	go.opentelemetry.io/otel/semconv: cannot find module providing package go.opentelemetry.io/otel/semconv
go: github.com/purpleidea/mgmt/etcd imports
	go.etcd.io/etcd/server/v3/embed imports
	go.opentelemetry.io/otel/exporters/otlp imports
	go.opentelemetry.io/otel/sdk/metric/controller/basic: cannot find module providing package go.opentelemetry.io/otel/sdk/metric/controller/basic
go: github.com/purpleidea/mgmt/etcd imports
	go.etcd.io/etcd/server/v3/embed imports
	go.opentelemetry.io/otel/exporters/otlp imports
	go.opentelemetry.io/otel/sdk/metric/processor/basic: cannot find module providing package go.opentelemetry.io/otel/sdk/metric/processor/basic
go: github.com/purpleidea/mgmt/etcd imports
	go.etcd.io/etcd/server/v3/embed imports
	go.opentelemetry.io/otel/exporters/otlp imports
	go.opentelemetry.io/otel/sdk/metric/selector/simple: cannot find module providing package go.opentelemetry.io/otel/sdk/metric/selector/simple
go: github.com/purpleidea/mgmt/etcd imports
	go.etcd.io/etcd/server/v3/embed imports
	go.opentelemetry.io/otel/exporters/otlp imports
	go.opentelemetry.io/otel/sdk/export/metric imports
	go.opentelemetry.io/otel/metric/number: cannot find module providing package go.opentelemetry.io/otel/metric/number