Aqara Roller Shade Driver E1

[hastime]

Device

• Product name: Roller Shade Driver E1

• Manufacturer: LUMI

• Model identifier: lumi.curtain.acn002

• Device type : Please remove all unrelated device types.

  • Other: Battery Powered roller shade driver

Screenshots

Basic

Identify

Alarms

Device Temperature

Groups

Scenes

On/Off

Level Control

Color Control

Simple Metering

Diagnostics

Other clusters that are not mentioned above

[Mimiix]

Hi,

Can you also make a post on the forum?

[hastime]

Hi,

Can you also make a post on the forum?

Hi I have made a forum post now, thanks, it just needs to be approved by the moderators.

Thanks!

[Mimiix]

Hi I have made a forum post now, thanks, it just needs to be approved by the moderators.

You triggered the spambot for some reason 😄. I approved it. Thanks!

[hastime]

Hi I have made a forum post now, thanks, it just needs to be approved by the moderators.

You triggered the spambot for some reason 😄. I approved it. Thanks!

Thanks! :)

[ads1230]

Any luck with this?

[lwsrbrts]

I'm very interested in support for this device too.

[volantynys]

Same already have one, would be wonderful to use it to its fullest

[kvanisterdael]

Is there any progress on this?

[Mimiix]

None, as no devs have picked it up.

[sanderlv]

Same here... deconz shows it but not function.
https://zigbee.blakadder.com/Aqara_ZNJLBL01LM.html

[Holbroser21]

@sanderlv
I was actually able to pair mine with deConz successfully over the weekend. It doesn't show battery, but otherworks works perfectly in Home Assistant as a blind controller! I am not quite sure what I did, as I spent over an hour attempting to pair it in the end. However, I think there are at least a few steps needed.

First you must have the top and bottom points set on the controller (they can be anything, you can change them later), and obviously, it must be paired and visible in the deConz gui.

At this point it was showing up as a light for me in both Phoscon and Home Assistant, and I spent some time manually reading every cluster, multiple times both with Phoson in searching mode, and not.

Finally, I think what seemed to work was when I used the deConz.configure service in Home Assistant to send data to it over the API. I was only aiming to re-name the entity in deConz, but from there, it seems to have worked without an issue.

If you give it all a go, let me know how you get on

[Mimiix]

@SwoopX Can you help on this?

[sanderlv]

Not sure what you actually mean to do...

I tried to search the deConz.configure but I do not seem to find "what to" service to it?

I have set a top and bottom limit. But Id no not get any feedback/control:

I can control up/down via:

But I do not get any event via:

Been trying to send some, but I get no action... althought this is error free from homeassitant perspective:

@Holbroser21 curious what you did where...

[Holbroser21]

@sanderlv I am just as confused myself to be honest, although obviously very happy it does work. I must have pushed every button/ reset every setting / clicked every box about 5 times while trying to set it up.

The service call I made was just this, where I got the path of the controller from the Phoscon API page:

Then this is now what I see on the entitiy's page in HA:

I do have this set in deConz from when I was testing things, but the values apear to have no effect on anything: