Loratap Tuya Smart Life ZigBee 3.0 Curtain Blind Switch for Roller Shutter Electric motor

[lukinno1]

Hello this curtain switch have Zigbee protocol. Some support for deconz??

https://www.loratap.com/products/tuya-smart-life-zigbee-30-curtain-blind-switch-for-roller-shutter-electric-motor-google-home-alexa-echo-voice-control-diy

https://www.zemismart.com/products/zigbee-eu-curtain-wall-light-switch-compatible-with-smartthing-hub-echo-plus-app-phone-voice-control

Device
Screenshots

[janmo0]

I'm also interested in the Loratap device working with deconz. It looks like they are pretty much the same. But I think no one knows until someone connects it with deconz.

The Zemismart should work. At least with the next release I think See:
#2999 or https://zigbee.blakadder.com/Zemismart_ZM-CSW002-D.html

[Mimiix]

@lukinno1 I've changed your request to a User question as this is not a device request.

We need the device in order to add support for it. Without that we can't do anything 😢

As @janmo0 mentioned, the Zemismart should have a degree on support in the next beta.

[janmo0]

We need the device in order to add support for it. Without that we can't do anything 😢

Ok, I ordered one to investigate. But need to wait at least 1 month for arrival.

As @janmo0 mentioned, the Zemismart should have a degree on support in the next beta.

You mean only basic functionality like up, down and stop?
Was already wondering how and if the set position is working?!

The only thing I could see in #2999 within the window covering cluster ist the 0x0015 and 0x0016 for 'Acceleration Time - Lift' and 'Deceleration Time - Lift' and maybe the mode on 0x0017 (which is used by the Ubisis Shutter J1 for setting the device into a configuration mode)

[Mimiix]

@janmo0 Great! Feel free to open a new device request issue when you get it!

@SwoopX might be able to answer this as he created the PR.

[SwoopX]

The only thing I could see in #2999 within the window covering cluster ist the 0x0015 and 0x0016 for 'Acceleration Time - Lift' and 'Deceleration Time - Lift' and maybe the mode on 0x0017 (which is used by the Ubisis Shutter J1 for setting the device into a configuration mode)

I don't know what you got that idea. The devices are controlled by the corresponding cluster commands, that's it. You'll probably see the lift percentage in the corresponding attribute then.

[janmo0]

I got the device today. It's working with Deconz via API or GUI.

In Phoscon its shown as:

I'm just wondering how to configure the device. Right now full open or close is around 10 seconds. What if the shade needs more or less to fully close or open?

[Smanar]

You can use the "lift" field to select the level.
Perhaps in phoscon using the brightness slider.

[cobirnm]

Maybe there is a way of entering Calibration Mode using the buttons. Has anyone been able to do it? I have the same issue.

[Smanar]

Right, I have same reaction for 2 other tuya covering. And one of them need a remote to set calibration.
without calibration the setLevel fonction don't work.

[cobirnm]

Right, I have same reaction for 2 other tuya covering. And one of them need a remote to set calibration.
without calibration the setLevel fonction don't work.

But have you been able to calibrate any of your devices?

[janmo0]

I can use the set level function without calibration on the Loratap device. But as default the device send power for 10 seconds. Or if I set to 50% then for 5 seconds.
That should be no problem for only open and close if the blinds close within 10 seconds and the motor has an mechanical or electric endstop.
But the set level function could be wrong then.

As said before, in the Ubisis Shutter J1 the 0x0017 setting is used to put the device into a configuration mode. As I read from the manual.

This is from the Loratap manual:

[cobirnm]

I can use the set level function without calibration on the Loratap device. But as default the device send power for 10 seconds. Or if I set to 50% then for 5 seconds.
That should be no problem for only open and close if the blinds close within 10 seconds and the motor has an mechanical or electric endstop.
But the set level function could be wrong then.

As said before, in the Ubisis Shutter J1 the 0x0017 setting is used to put the device into a configuration mode. As I read from the manual.

This is from the Loratap manual:

I have tried writing the 0x0017 parameter using VNC conection but I always get "writing failed". Does anyone know how can I achieve this?