Enhancement props setters and getters

_unittest/conftest.py

@@ -77,6 +77,7 @@
         "skip_debug": False,
         "local": False,
     }
+settings.non_graphical = config["NonGraphical"]
 
 
 class BasisTest(object):
@@ -107,7 +108,7 @@ def my_teardown(self):
 
     def add_app(self, project_name=None, design_name=None, solution_type=None, application=None):
         if "oDesktop" not in dir(sys.modules["__main__"]):
-            desktop = Desktop(desktop_version, non_graphical, new_thread)
+            desktop = Desktop(desktop_version, settings.non_graphical, new_thread)
             desktop.disable_autosave()
         if project_name:
             example_project = os.path.join(local_path, "example_models", project_name + ".aedt")
@@ -170,7 +171,6 @@ def setup(self):
 # Define desktopVersion explicitly since this is imported by other modules
 desktop_version = config["desktopVersion"]
 new_thread = config["NewThread"]
-non_graphical = config["NonGraphical"]
 
 
 @pytest.fixture(scope="session", autouse=True)

_unittest/test_28_Maxwell3D.py

@@ -88,6 +88,14 @@ def test_07_setup(self):
         Setup.props["MinimumConvergedPasses"] = 1
         Setup.props["PercentRefinement"] = 30
         Setup.props["Frequency"] = adaptive_frequency
+        dc_freq = 0.1
+        stop_freq = 10
+        count = 1
+        assert Setup.add_eddy_current_sweep("LinearStep", dc_freq, stop_freq, count, clear=True)
+        assert isinstance(Setup.props["SweepRanges"]["Subrange"], dict)
+        assert Setup.add_eddy_current_sweep("LinearCount", dc_freq, stop_freq, count, clear=False)
+        assert isinstance(Setup.props["SweepRanges"]["Subrange"], list)
+
         assert Setup.update()
         assert Setup.enable_expression_cache(["CoreLoss"], "Fields", "Phase='0deg' ", True)
         assert Setup.disable()

doc/source/API/CoreEdb.rst

@@ -68,7 +68,7 @@ Those classes are the container of Data read from edb file.
    EDB_Data.EDBLayers
    EDB_Data.EDBPadProperties
    EDB_Data.EDBPadstack
-   EDB_Data.EDBPinInstances
+   EDB_Data.EDBPadstackInstance
    EDB_Data.EDBComponent
    EDB_Data.EDBNetsData
    EDB_Data.EDBPrimitives

doc/source/API/Primitives.rst

@@ -192,7 +192,6 @@ It contains all getter and setter to simplify object manipulation.
 
    Object3d.CircuitComponent
    Object3d.CircuitPins
-   Object3d.ComponentParameters
 
 
 Objects in Hfss3d Layout

examples/00-EDB/03_5G_antenna_example.py

@@ -198,7 +198,6 @@ def points(self):
 setup = h3d.create_setup()
 setup.props["AdaptiveSettings"]["SingleFrequencyDataList"]["AdaptiveFrequencyData"]["AdaptiveFrequency"] = "20GHz"
 setup.props["AdaptiveSettings"]["SingleFrequencyDataList"]["AdaptiveFrequencyData"]["MaxPasses"] = 4
-setup.update()
 h3d.create_linear_count_sweep(
     setupname=setup.name,
     unit="GHz",

examples/01-Modeling-Setup/HFSS_CoordinateSystem.py

@@ -50,15 +50,13 @@
 cs1.props["OriginX"] = 10
 cs1.props["OriginY"] = 10
 cs1.props["OriginZ"] = 10
-cs1.update()
 
 # The pointing vectors can be changed.
 
 ypoint = [0, -1, 0]
 cs1.props["YAxisXvec"] = ypoint[0]
 cs1.props["YAxisYvec"] = ypoint[1]
 cs1.props["YAxisZvec"] = ypoint[2]
-cs1.update()
 
 ###############################################################################
 # Rename the Coordinate System
@@ -80,7 +78,6 @@
 cs1.props["Phi"] = "10deg"
 cs1.props["Theta"] = "22deg"
 cs1.props["Psi"] = "30deg"
-cs1.update()
 
 ###############################################################################
 # Delete the Coordinate System
@@ -151,7 +148,6 @@
 
 # The axis can also be changed after the coordinate system is created.
 fcs3.props["WhichAxis"] = "X"
-fcs3.update()
 
 ###############################################################################
 # Apply a rotation around the Z axis.
@@ -162,7 +158,6 @@
 
 # The rotation can also be changed after the coordinate system is created.
 fcs4.props["ZRotationAngle"] = "3deg"
-fcs4.update()
 
 ###############################################################################
 # Apply an offset to the X and Y axis of a Face coordinate system
@@ -175,7 +170,6 @@
 # The offset can also be changed after the coordinate system is created.
 fcs5.props["XOffset"] = "0.2mm"
 fcs5.props["YOffset"] = "0.1mm"
-fcs5.update()
 
 ###############################################################################
 # Create a coordinate system relative to a Face coordinate system

examples/02-HFSS/Flex_CPWG.py

@@ -177,7 +177,6 @@ def create_bending(radius, extension=0):
 setup.props["Frequency"] = "2GHz"
 setup.props["MaximumPasses"] = 10
 setup.props["MinimumConvergedPasses"] = 2
-setup.update()
 hfss.create_linear_count_sweep(
     setupname="setup1",
     unit="GHz",

examples/02-HFSS/HFSS_Dipole.py

@@ -77,7 +77,6 @@
 setup = hfss.create_setup("MySetup")
 setup.props["Frequency"] = "1GHz"
 setup.props["MaximumPasses"] = 1
-setup.update()
 hfss.create_linear_count_sweep(
     setupname=setup.name,
     unit="GHz",

examples/02-HFSS/HFSS_Spiral.py

@@ -120,7 +120,6 @@ def create_line(pts):
 setup1 = hfss.create_setup(setupname="setup1")
 setup1.props["Frequency"] = "10GHz"
 hfss.create_linear_count_sweep("setup1", "GHz", 1e-3, 50, 451, sweep_type="Interpolating")
-setup1.update()
 hfss.save_project()
 hfss.analyze_all()
 

examples/02-HFSS/SBR_Example.py

@@ -68,13 +68,12 @@
 # This example creates a setup and then solves it.
 
 setup1 = target.create_setup()
-setup1.props["RayDensityPerWavelength"] = 2
+setup1.props["RadiationSetup"] = "ATK_3D"
 setup1.props["ComputeFarFields"] = True
+setup1.props["RayDensityPerWavelength"] = 2
 setup1.props["MaxNumberOfBounces"] = 3
 setup1.props["Sweeps"]["Sweep"]["RangeType"] = "SinglePoints"
 setup1.props["Sweeps"]["Sweep"]["RangeStart"] = "10GHz"
-setup1.props["RadiationSetup"] = "ATK_3D"
-setup1.update()
 target.analyze_nominal()
 
 ###############################################################################

examples/02-Maxwell/Maxwell2D_Transient.py

@@ -83,7 +83,6 @@
 setup.props["N Steps"] = "1"
 setup.props["Steps From"] = "0s"
 setup.props["Steps To"] = "0.002s"
-setup.update()
 
 ###############################################################################
 # Create a Rectangular Plot

examples/02-Maxwell/Maxwell3DTeam3.py

@@ -40,7 +40,6 @@
 ################################################################################
 # Create TEAM3 aluminium material for the ladder plate
 mat = M3D.materials.add_material("team3_aluminium")
-mat.update()
 mat.conductivity = 32780000
 
 ###############################################################################
@@ -98,10 +97,8 @@
 Setup = M3D.create_setup(setupname="Setup1")
 Setup.props["Frequency"] = "200Hz"
 Setup.props["HasSweepSetup"] = True
-Setup.props["StartValue"] = "50Hz"
-Setup.props["StopValue"] = "200Hz"
-Setup.props["StepSize"] = "150Hz"
-Setup.update()
+Setup.add_eddy_current_sweep("LinearStep", 50, 200, 150, clear=True)
+
 
 ################################################################################
 # Adjust Eddy Effects for LadderPlate and SearchCoil
@@ -116,7 +113,6 @@
 param.props["ProdOptiSetupDataV2"]["SaveFields"] = True
 param.props["ProdOptiSetupDataV2"]["CopyMesh"] = False
 param.props["ProdOptiSetupDataV2"]["SolveWithCopiedMeshOnly"] = True
-param.update()
 
 # Solve the model, we solve the parametric sweep directly so results of all variations are available.
 M3D.analyze_setup(sweepname)

examples/02-Maxwell/Maxwell3DTeam7.py

@@ -42,12 +42,9 @@
 Setup = M3D.create_setup(setupname="Setup1")
 Setup.props["Frequency"] = "200Hz"
 Setup.props["HasSweepSetup"] = True
-Setup.props["StartValue"] = str(dc_freq) + "Hz"
-Setup.props["StopValue"] = str(stop_freq) + "Hz"
-Setup.props["StepSize"] = str(stop_freq - dc_freq) + "Hz"
+Setup.add_eddy_current_sweep("LinearStep", dc_freq, stop_freq, stop_freq - dc_freq, clear=True)
 Setup.props["UseHighOrderShapeFunc"] = True
 Setup.props["PercentError"] = 0.4
-Setup.update()
 
 ###########################################################################################
 # Coil Dimensions
@@ -106,7 +103,6 @@
 
 # Add a new material with Team 7 properties for Aluminium
 mat = M3D.materials.add_material("team7_aluminium")
-mat.update()
 mat.conductivity = 3.526e7
 
 # Model the Aluminium plate with a hole in by subtracting two rectangular cuboids.

examples/03-Circuit/Circuit_Example.py

@@ -46,13 +46,7 @@
 # This method creates and customizes a Linear Network Analysis (LNA) setup.
 
 setup1 = aedt_app.create_setup("MyLNA")
-setup1.SweepDefinition = [
-    ("Variable", "Freq"),
-    ("Data", "LINC 0GHz 4GHz 10001"),
-    ("OffsetF1", False),
-    ("Synchronize", 0),
-]
-setup1.update()
+setup1.props["SweepDefinition"]["Data"] = "LINC 0GHz 4GHz 10001"
 
 ###############################################################################
 # Create Components
@@ -94,8 +88,7 @@
 # This method adds a transient setup.
 
 setup2 = aedt_app.create_setup("MyTransient", aedt_app.SETUPS.NexximTransient)
-setup2.TransientData = ["0.01ns", "200ns"]
-setup2.update()
+setup2.props["TransientData"] = ["0.01ns", "200ns"]
 setup3 = aedt_app.create_setup("MyDC", aedt_app.SETUPS.NexximDC)
 
 ###############################################################################

examples/04-Icepak/Icepak_Example.py

@@ -84,7 +84,6 @@
 setup1.props["Convergence Criteria - Max Iterations"] = 5
 setup1.props["Linear Solver Type - Pressure"] = "flex"
 setup1.props["Linear Solver Type - Temperature"] = "flex"
-setup1.update()
 ipk.save_project(r"C:\temp\Graphic_card.aedt")
 
 ###############################################################################

examples/04-Icepak/Sherlock_Example.py

@@ -181,7 +181,6 @@
 setup1.props["Radiation Model"] = "Discrete Ordinates Model"
 setup1.props["Include Gravity"] = True
 setup1.props["Secondary Gradient"] = True
-setup1.update()
 ipk.assign_openings(ipk.modeler.get_object_faces("Region"))
 
 ###############################################################################

examples/05-Q3D/Q3D_Example.py

@@ -85,7 +85,6 @@
 q.assign_source_to_objectface("Bar3", axisdir=q.AxisDir.XPos, source_name="Source3")
 bar3_sink = q.assign_sink_to_objectface("Bar3", axisdir=q.AxisDir.YPos)
 bar3_sink.name = "Sink3"
-bar3_sink.update()
 
 ###############################################################################
 # Print Infos

examples/06-Multiphysics/Hfss_Icepak_Coupling.py

@@ -149,7 +149,6 @@
 setup.props["Frequency"] = "1GHz"
 setup.props["BasisOrder"] = 2
 setup.props["MaximumPasses"] = 1
-setup.update()
 
 ###############################################################################
 # Generate a Sweep
@@ -193,7 +192,6 @@
 
 setup_ipk = ipkapp.create_setup("SetupIPK")
 setup_ipk.props["Convergence Criteria - Max Iterations"] = 3
-setup_ipk.update()
 
 ################################################################################
 # Edit or Review Mesh Parameters

examples/06-Multiphysics/Hfss_Mechanical.py

@@ -97,7 +97,6 @@
 unit = "GHz"
 sweep_list = ["LINC", str(bw_start) + unit, str(bw_stop) + unit, str(n_points)]
 LNA_setup.props["SweepDefinition"]["Data"] = " ".join(sweep_list)
-LNA_setup.update()
 
 ###############################################################################
 # Solve and Push Excitation

pyaedt/__init__.py

@@ -8,7 +8,9 @@
     with open(os.path.join(os.path.dirname(__file__), "version.txt"), "r") as f:
         __version__ = f.read().strip()
 
+
 from pyaedt.generic.general_methods import settings
+
 from pyaedt.generic import constants
 from pyaedt.generic.general_methods import pyaedt_function_handler, generate_unique_name, _retry_ntimes
 from pyaedt.generic.general_methods import is_ironpython, _pythonver, inside_desktop, convert_remote_object

pyaedt/application/AnalysisNexxim.py

@@ -367,11 +367,10 @@ def create_setup(self, setupname="MySetupAuto", setuptype=None, props={}):
 
         name = self.generate_unique_setup_name(setupname)
         setup = SetupCircuit(self, setuptype, name)
-        setup.name = name
         setup.create()
         if props:
             for el in props:
-                setup.props[el] = props[el]
+                setup.props._setitem_without_update(el, props[el])
         setup.update()
         self.analysis_setup = name
         self.setups.append(setup)

pyaedt/application/MessageManager.py

@@ -7,7 +7,7 @@
 import logging
 import sys
 
-from pyaedt.generic.general_methods import settings
+from pyaedt import settings
 
 message_levels = {"Global": 0, "Project": 1, "Design": 2}
 

pyaedt/common_rpc.py

@@ -60,6 +60,7 @@ def launch_server(port=18000, ansysem_path=None, non_graphical=False):
         os.environ["PYAEDT_SERVER_AEDT_PATH"] = ansysem_path
         os.environ["PYAEDT_SERVER_AEDT_NG"] = str(non_graphical)
         os.environ["ANS_NO_MONO_CLEANUP"] = str(1)
+        os.environ["ANS_NODEPCHECK"] = str(1)
 
     hostname = socket.gethostname()
     safe_attrs = {

pyaedt/desktop.py

@@ -30,8 +30,9 @@
     import subprocess
 
 from pyaedt.misc import list_installed_ansysem
-from pyaedt import pyaedt_function_handler, settings
+from pyaedt import pyaedt_function_handler
 from pyaedt.generic.general_methods import is_ironpython, _pythonver, inside_desktop
+from pyaedt import settings
 
 from pyaedt import aedt_logger, __version__
 
@@ -284,7 +285,6 @@ def __init__(
         self._main.pyaedt_version = pyaedtversion
         self._main.interpreter_ver = _pythonver
         self._main.student_version = student_version
-        settings.non_graphical = non_graphical
         if is_ironpython:
             self._main.isoutsideDesktop = False
         else:
@@ -295,13 +295,22 @@ def __init__(
             self.release_on_exit = False
             self._main.oDesktop = oDesktop
             settings.aedt_version = oDesktop.GetVersion()[0:6]
+            try:
+                settings.non_graphical = oDesktop.GetIsNonGraphical()
+            except:
+                settings.non_graphical = non_graphical
         elif "oDesktop" in dir(self._main) and self._main.oDesktop is not None:  # pragma: no cover
             self.release_on_exit = False
+            try:
+                settings.non_graphical = self._main.oDesktop.GetIsNonGraphical()
+            except:
+                settings.non_graphical = non_graphical
         else:
+            settings.non_graphical = non_graphical
             if "oDesktop" in dir(self._main):
                 del self._main.oDesktop
             self._main.student_version, version_key, version = self._set_version(specified_version, student_version)
-            settings.aedt_version = version
+            settings.aedt_version = version_key
             if _com == "ironpython":  # pragma: no cover
                 print("Launching PyAEDT outside AEDT with IronPython.")
                 self._init_ironpython(non_graphical, new_desktop_session, version)