Procedure Turn Display Bug

[6639835]

There is an issue with displaying Procedure Turn in LNM, which is the PI segment. See the following pictures.
Pic1: ZLYS
Pic2: 20V

I think a solution might be to define a distance for the segments for different time turn and display it as the default setting

[albar965]

Ok. Thanks. Will check for the next major release.

[mattfr4]

From the ARINC spec:

A speed of 210 knots, ground speed, will be used to compute distance based on time (3.5 NM per minute). On Course Reversal Path Terminators, if no time or distance is specified, a minimum distance of 4.3 NM will be used prior to turning inbound.

[albar965]

Thanks. The reversals currently use a fixed distance which can result in such errors.