Update the local-deployment documentation to use the new abctl command.

docs/deploying-airbyte/docker-compose.md

@@ -0,0 +1,76 @@
+# Docker Compose
+
+:::info
+These instructions have been tested on MacOS, Windows 10 and Ubuntu 22.04.
+
+:::
+
+## Setup & launch Airbyte
+
+- Install `Docker Engine` and the `Docker Compose plugin` on your workstation \(see [instructions](https://docs.docker.com/engine/install/)\).
+- After Docker is installed, you can immediately get started locally by running:
+
+```bash
+# clone Airbyte from GitHub
+git clone --depth=1 https://github.com/airbytehq/airbyte.git
+
+# switch into Airbyte directory
+cd airbyte
+
+# start Airbyte
+./run-ab-platform.sh
+```
+
+- In your browser, visit [http://localhost:8000](http://localhost:8000)
+- You will be asked for a username and password. By default, that's username `airbyte` and password `password`. Once you deploy Airbyte to your servers, be sure to change these in your `.env` file:
+
+```yaml
+# Proxy Configuration
+# Set to empty values, e.g. "" to disable basic auth
+BASIC_AUTH_USERNAME=your_new_username_here
+BASIC_AUTH_PASSWORD=your_new_password_here
+```
+
+- Start moving some data!
+
+## Deploy on Windows
+
+After installing the WSL 2 backend and Docker you should be able to run containers using Windows PowerShell. Additionally, as we note frequently, you will need `docker-compose` to build Airbyte from source. The suggested guide already installs `docker-compose` on Windows.
+
+### Setup Guide
+
+**1. Check out system requirements from [Docker documentation](https://docs.docker.com/desktop/windows/install/).**
+
+Follow the steps on the system requirements, and necessarily, download and install the Linux kernel update package.
+
+**2. Install Docker Desktop on Windows.**
+
+Install [Docker Desktop](https://docs.docker.com/desktop/windows/install/) from here.
+
+Make sure to select the options:
+
+1. _Enable Hyper-V Windows Features_
+2. _Install required Windows components for WSL 2_
+   when prompted. After installation, it will require to reboot your computer.
+
+**3. You're done!**
+
+```bash
+git clone --depth=1 https://github.com/airbytehq/airbyte.git
+cd airbyte
+bash run-ab-platform.sh
+```
+
+- In your browser, just visit [http://localhost:8000](http://localhost:8000)
+- You will be asked for a username and password. By default, that's username `airbyte` and password `password`. Once you deploy airbyte to your servers, be sure to change these.
+- Start moving some data!
+
+## Troubleshooting
+If you have any questions about the local setup and deployment process, head over to our [Getting Started FAQ](https://github.com/airbytehq/airbyte/discussions/categories/questions) on our Airbyte Forum that answers the following questions and more:
+
+- How long does it take to set up Airbyte?
+- Where can I see my data once I've run a sync?
+- Can I set a start time for my sync?
+
+If you encounter any issues, check out [Getting Support](/community/getting-support) documentation
+for options how to get in touch with the community or us.

docs/deploying-airbyte/local-deployment.md

@@ -1,68 +1,31 @@
 # Local Deployment
 
 :::info
-These instructions have been tested on MacOS, Windows 10 and Ubuntu 22.04.
+These instructions have been tested on MacOS, Windows, Ubuntu and Fedora.
 
 :::
 
 ## Setup & launch Airbyte
 
-- Install `Docker Engine` and the `Docker Compose plugin` on your workstation \(see [instructions](https://docs.docker.com/engine/install/)\).
-- After Docker is installed, you can immediately get started locally by running:
+- Install `Docker Desktop`  \(see [instructions](https://docs.docker.com/desktop/install/mac-install/)\).
+- After `Docker Desktop` is installed, you must enable `Kubernetes` \(see [instructions](https://docs.docker.com/desktop/kubernetes/)\).
+- Download the latest version of `abctl` from the [releases page](https://github.com/airbytehq/abctl/releases) and run the following command:
 
 ```bash
-# clone Airbyte from GitHub
-git clone --depth=1 https://github.com/airbytehq/airbyte.git
-
-# switch into Airbyte directory
-cd airbyte
-
-# start Airbyte
-./run-ab-platform.sh
-```
-
-- In your browser, visit [http://localhost:8000](http://localhost:8000)
-- You will be asked for a username and password. By default, that's username `airbyte` and password `password`. Once you deploy Airbyte to your servers, be sure to change these in your `.env` file:
-
-```yaml
-# Proxy Configuration
-# Set to empty values, e.g. "" to disable basic auth
-BASIC_AUTH_USERNAME=your_new_username_here
-BASIC_AUTH_PASSWORD=your_new_password_here
+abctl local install
 ```
 
-- Start moving some data!
-
-## Deploy on Windows
-
-After installing the WSL 2 backend and Docker you should be able to run containers using Windows PowerShell. Additionally, as we note frequently, you will need `docker-compose` to build Airbyte from source. The suggested guide already installs `docker-compose` on Windows.
-
-### Setup Guide
-
-**1. Check out system requirements from [Docker documentation](https://docs.docker.com/desktop/windows/install/).**
-
-Follow the steps on the system requirements, and necessarily, download and install the Linux kernel update package.
-
-**2. Install Docker Desktop on Windows.**
-
-Install [Docker Desktop](https://docs.docker.com/desktop/windows/install/) from here.
-
-Make sure to select the options:
-
-1. _Enable Hyper-V Windows Features_
-2. _Install required Windows components for WSL 2_
-   when prompted. After installation, it will require to reboot your computer.
-
-**3. You're done!**
+- Your browser should open to the Airbyte Application, if it does not visit [http://localhost](http://localhost)
+- You will be asked for a username and password. By default, that's username `airbyte` and password `password`. You can set these values through command line flags or environment variables. For example, to set the username and password to `foo` and `bar` respectively, you can run the following command:
 
 ```bash
-git clone --depth=1 https://github.com/airbytehq/airbyte.git
-cd airbyte
-bash run-ab-platform.sh
+abctl local install --username foo --password bar
+
+# Or as Environment Variables
+ABCTL_LOCAL_INSTALL_PASSWORD=foo
+ABCTL_LOCAL_INSTALL_USERNAME=bar
 ```
 
-- In your browser, just visit [http://localhost:8000](http://localhost:8000)
-- You will be asked for a username and password. By default, that's username `airbyte` and password `password`. Once you deploy airbyte to your servers, be sure to change these.
 - Start moving some data!
 
 ## Troubleshooting

docusaurus/sidebars.js

@@ -330,6 +330,11 @@ const deployAirbyte = {
       label: "On your local machine",
       id: "deploying-airbyte/local-deployment",
     },
+    {
+      type: "doc",
+      label: "Using docker compose",
+      id: "deploying-airbyte/docker-compose",
+    },
     {
       type: "doc",
       label: "On AWS EC2",