✨Source Microsoft Teams Migrate Python CDK to Low-code CDK

airbyte-integrations/connectors/source-microsoft-teams/README.md

@@ -1,99 +1,103 @@
-# Rabbitmq Destination
+# Microsoft Teams Source
 
-This is the repository for the Rabbitmq destination connector, written in Python.
-For information about how to use this connector within Airbyte, see [the documentation](https://docs.airbyte.io/integrations/destinations/rabbitmq).
+This is the repository for the Microsoft Teams configuration based source connector.
+For information about how to use this connector within Airbyte, see [the documentation](https://docs.airbyte.com/integrations/sources/microsoft-teams).
 
 ## Local development
 
 ### Prerequisites
-**To iterate on this connector, make sure to complete this prerequisites section.**
 
-#### Minimum Python version required `= 3.7.0`
+* Python (`^3.9`)
+* Poetry (`^1.7`) - installation instructions [here](https://python-poetry.org/docs/#installation)
 
-#### Build & Activate Virtual Environment and install dependencies
-From this connector directory, create a virtual environment:
-```
-python -m venv .venv
-```
 
-This will generate a virtualenv for this module in `.venv/`. Make sure this venv is active in your
-development environment of choice. To activate it from the terminal, run:
-```
-source .venv/bin/activate
-pip install -r requirements.txt
+
+### Installing the connector
+
+From this connector directory, run:
+```bash
+poetry install --with dev
 ```
-If you are in an IDE, follow your IDE's instructions to activate the virtualenv.
 
-Note that while we are installing dependencies from `requirements.txt`, you should only edit `setup.py` for your dependencies. `requirements.txt` is
-used for editable installs (`pip install -e`) to pull in Python dependencies from the monorepo and will call `setup.py`.
-If this is mumbo jumbo to you, don't worry about it, just put your deps in `setup.py` but install using `pip install -r requirements.txt` and everything
-should work as you expect.
 
-#### Create credentials
-**If you are a community contributor**, follow the instructions in the [documentation](https://docs.airbyte.io/integrations/destinations/rabbitmq)
-to generate the necessary credentials. Then create a file `secrets/config.json` conforming to the `destination_rabbitmq/spec.json` file.
-Note that the `secrets` directory is gitignored by default, so there is no danger of accidentally checking in sensitive information.
-See `integration_tests/sample_config.json` for a sample config file.
+### Create credentials
+
+**If you are a community contributor**, follow the instructions in the [documentation](https://docs.airbyte.com/integrations/sources/microsoft-teams)
+to generate the necessary credentials. Then create a file `secrets/config.json` conforming to the `src/source_microsoft_teams/spec.yaml` file.
+Note that any directory named `secrets` is gitignored across the entire Airbyte repo, so there is no danger of accidentally checking in sensitive information.
+See `sample_files/sample_config.json` for a sample config file.
 
-**If you are an Airbyte core member**, copy the credentials in Lastpass under the secret name `destination rabbitmq test creds`
-and place them into `secrets/config.json`.
 
 ### Locally running the connector
+
 ```
-python main.py spec
-python main.py check --config secrets/config.json
-python main.py discover --config secrets/config.json
-python main.py read --config secrets/config.json --catalog integration_tests/configured_catalog.json
+poetry run source-microsoft-teams spec
+poetry run source-microsoft-teams check --config secrets/config.json
+poetry run source-microsoft-teams discover --config secrets/config.json
+poetry run source-microsoft-teams read --config secrets/config.json --catalog sample_files/configured_catalog.json
 ```
 
-### Locally running the connector docker image
+### Running tests
 
+To run tests locally, from the connector directory run:
 
-#### Build
-**Via [`airbyte-ci`](https://github.com/airbytehq/airbyte/blob/master/airbyte-ci/connectors/pipelines/README.md) (recommended):**
-```bash
-airbyte-ci connectors --name destination-rabbitmq build
+```
+poetry run pytest tests
 ```
 
-An image will be built with the tag `airbyte/destination-rabbitmq:dev`.
+### Building the docker image
 
-**Via `docker build`:**
+1. Install [`airbyte-ci`](https://github.com/airbytehq/airbyte/blob/master/airbyte-ci/connectors/pipelines/README.md)
+2. Run the following command to build the docker image:
 ```bash
-docker build -t airbyte/destination-rabbitmq:dev .
+airbyte-ci connectors --name=source-microsoft-teams build
 ```
 
-#### Run
+An image will be available on your host with the tag `airbyte/source-microsoft-teams:dev`.
+
+
+### Running as a docker container
+
 Then run any of the connector commands as follows:
 ```
-docker run --rm airbyte/destination-rabbitmq:dev spec
-docker run --rm -v $(pwd)/secrets:/secrets airbyte/destination-rabbitmq:dev check --config /secrets/config.json
-# messages.jsonl is a file containing line-separated JSON representing AirbyteMessages
-cat messages.jsonl | docker run --rm -v $(pwd)/secrets:/secrets -v $(pwd)/integration_tests:/integration_tests airbyte/destination-rabbitmq:dev write --config /secrets/config.json --catalog /integration_tests/configured_catalog.json
+docker run --rm airbyte/source-microsoft-teams:dev spec
+docker run --rm -v $(pwd)/secrets:/secrets airbyte/source-microsoft-teams:dev check --config /secrets/config.json
+docker run --rm -v $(pwd)/secrets:/secrets airbyte/source-microsoft-teams:dev discover --config /secrets/config.json
+docker run --rm -v $(pwd)/secrets:/secrets -v $(pwd)/integration_tests:/integration_tests airbyte/source-microsoft-teams:dev read --config /secrets/config.json --catalog /integration_tests/configured_catalog.json
 ```
 
-## Testing
+### Running our CI test suite
+
 You can run our full test suite locally using [`airbyte-ci`](https://github.com/airbytehq/airbyte/blob/master/airbyte-ci/connectors/pipelines/README.md):
 ```bash
 airbyte-ci connectors --name=source-microsoft-teams test
 ```
 
 ### Customizing acceptance Tests
-Customize `acceptance-test-config.yml` file to configure tests. See [Connector Acceptance Tests](https://docs.airbyte.com/connector-development/testing-connectors/connector-acceptance-tests-reference) for more information.
+
+Customize `acceptance-test-config.yml` file to configure acceptance tests. See [Connector Acceptance Tests](https://docs.airbyte.com/connector-development/testing-connectors/connector-acceptance-tests-reference) for more information.
 If your connector requires to create or destroy resources for use during acceptance tests create fixtures for it and place them inside integration_tests/acceptance.py.
 
-## Dependency Management
-All of your dependencies should go in `setup.py`, NOT `requirements.txt`. The requirements file is only used to connect internal Airbyte dependencies in the monorepo for local development.
-We split dependencies between two groups, dependencies that are:
-* required for your connector to work need to go to `MAIN_REQUIREMENTS` list.
-* required for the testing need to go to `TEST_REQUIREMENTS` list
+### Dependency Management
+
+All of your dependencies should be managed via Poetry. 
+To add a new dependency, run:
+```bash
+poetry add <package-name>
+```
+
+Please commit the changes to `pyproject.toml` and `poetry.lock` files.
+
+## Publishing a new version of the connector
 
-### Publishing a new version of the connector
 You've checked out the repo, implemented a million dollar feature, and you're ready to share your changes with the world. Now what?
 1. Make sure your changes are passing our test suite: `airbyte-ci connectors --name=source-microsoft-teams test`
-2. Bump the connector version in `metadata.yaml`: increment the `dockerImageTag` value. Please follow [semantic versioning for connectors](https://docs.airbyte.com/contributing-to-airbyte/resources/pull-requests-handbook/#semantic-versioning-for-connectors).
+2. Bump the connector version (please follow [semantic versioning for connectors](https://docs.airbyte.com/contributing-to-airbyte/resources/pull-requests-handbook/#semantic-versioning-for-connectors)): 
+    - bump the `dockerImageTag` value in in `metadata.yaml`
+    - bump the `version` value in `pyproject.toml`
 3. Make sure the `metadata.yaml` content is up to date.
-4. Make the connector documentation and its changelog is up to date (`docs/integrations/sources/microsoft-teams.md`).
+4. Make sure the connector documentation and its changelog is up to date (`docs/integrations/sources/microsoft-teams.md`).
 5. Create a Pull Request: use [our PR naming conventions](https://docs.airbyte.com/contributing-to-airbyte/resources/pull-requests-handbook/#pull-request-title-convention).
 6. Pat yourself on the back for being an awesome contributor.
 7. Someone from Airbyte will take a look at your PR and iterate with you to merge it into master.
-
+8. Once your PR is merged, the new version of the connector will be automatically published to Docker Hub and our connector registry.

airbyte-integrations/connectors/source-microsoft-teams/unit_tests/unit_test.py → airbyte-integrations/connectors/source-microsoft-teams/__init__.py

@@ -1,7 +1,3 @@
 #
 # Copyright (c) 2023 Airbyte, Inc., all rights reserved.
 #
-
-
-def test_example_method():
-    assert True

airbyte-integrations/connectors/source-microsoft-teams/acceptance-test-config.yml

@@ -1,22 +1,35 @@
 # See [Connector Acceptance Tests](https://docs.airbyte.com/connector-development/testing-connectors/connector-acceptance-tests-reference)
 # for more information about how to configure these tests
 connector_image: airbyte/source-microsoft-teams:dev
-tests:
+acceptance_tests:
   spec:
-    - spec_path: "source_microsoft_teams/spec.json"
+    tests:
+      - spec_path: "source_microsoft_teams/spec.yaml"
   connection:
-    - config_path: "secrets/config.json"
-      status: "succeed"
-    - config_path: "secrets/old_config.json"
-      status: "succeed"
-    - config_path: "secrets/config_oauth.json"
-      status: "succeed"
-    - config_path: "integration_tests/invalid_config.json"
-      status: "failed"
+    tests:
+      - config_path: "secrets/config.json"
+        status: "succeed"
+      - config_path: "integration_tests/invalid_config.json"
+        status: "failed"
   discovery:
-    - config_path: "secrets/config.json"
+    tests:
+      - config_path: "secrets/config.json"
   basic_read:
-    - config_path: "secrets/config.json"
-      empty_streams: []
+    tests:
+      - config_path: "secrets/config.json"
+        configured_catalog_path: "integration_tests/configured_catalog.json"
+        empty_streams:
+          - name: team_device_usage_report
+            bypass_reason: "Could not seed this stream with sandbox credentails"
+  incremental:
+    bypass_reason: "This connector does not implement incremental sync"
+  # TODO uncomment this block this block if your connector implements incremental sync:
+  #    tests:
+  #      - config_path: "secrets/config.json"
+  #        configured_catalog_path: "integration_tests/configured_catalog.json"
+  #        future_state:
+  #          future_state_path: "integration_tests/abnormal_state.json"
   full_refresh:
-    - config_path: "secrets/config.json"
+    tests:
+      - config_path: "secrets/config.json"
+        configured_catalog_path: "integration_tests/configured_catalog.json"

airbyte-integrations/connectors/source-microsoft-teams/integration_tests/__init__.py

@@ -1,3 +1,3 @@
 #
-# Copyright (c) 2021 Airbyte, Inc., all rights reserved.
+# Copyright (c) 2023 Airbyte, Inc., all rights reserved.
 #

airbyte-integrations/connectors/source-microsoft-teams/integration_tests/abnormal_state.json

@@ -0,0 +1,5 @@
+{
+  "todo-stream-name": {
+    "todo-field-name": "todo-abnormal-value"
+  }
+}

airbyte-integrations/connectors/source-microsoft-teams/integration_tests/acceptance.py

@@ -11,4 +11,6 @@
 @pytest.fixture(scope="session", autouse=True)
 def connector_setup():
     """This fixture is a placeholder for external resources that acceptance test might require."""
+    # TODO: setup test dependencies if needed. otherwise remove the TODO comments
     yield
+    # TODO: clean up test dependencies

airbyte-integrations/connectors/source-microsoft-teams/integration_tests/invalid_config.json

@@ -1,6 +1,9 @@
 {
-  "client_id": "wrong_client_id",
-  "tenant_id": "wrong_tenant_id",
-  "client_secret": "wrong_client_secret",
+  "credentials": {
+    "auth_type": "Token",
+    "client_id": "wrong_client_id",
+    "tenant_id": "wrong_tenant_id",
+    "client_secret": "wrong_client_secret"
+  },
   "period": "D180"
 }

airbyte-integrations/connectors/source-microsoft-teams/integration_tests/sample_config.json

@@ -1,6 +1,9 @@
 {
-  "tenant_id": "<your tenant ID>",
-  "client_id": "<your client ID>",
-  "client_secret": "<your client secret>",
-  "period": "D7"
+  "credentials": {
+    "auth_type": "Token",
+    "client_id": "client_id",
+    "tenant_id": "tenant_id",
+    "client_secret": "client_secret"
+  },
+  "period": "D180"
 }

airbyte-integrations/connectors/source-microsoft-teams/integration_tests/sample_state.json

@@ -0,0 +1,5 @@
+{
+  "todo-stream-name": {
+    "todo-field-name": "value"
+  }
+}

airbyte-integrations/connectors/source-microsoft-teams/metadata.yaml

@@ -1,22 +1,32 @@
 data:
+  allowedHosts:
+    hosts:
+      - graph.microsoft.com
+  registries:
+    oss:
+      enabled: true
+    cloud:
+      enabled: true
+  remoteRegistries:
+    pypi:
+      enabled: true
+      packageName: airbyte-source-microsoft-teams
+  connectorBuildOptions:
+    # Please update to the latest version of the connector base image.
+    # https://hub.docker.com/r/airbyte/python-connector-base
+    # Please use the full address with sha256 hash to guarantee build reproducibility.
+    baseImage: docker.io/airbyte/python-connector-base:1.2.0@sha256:c22a9d97464b69d6ef01898edf3f8612dc11614f05a84984451dde195f337db9
   connectorSubtype: api
   connectorType: source
   definitionId: eaf50f04-21dd-4620-913b-2a83f5635227
-  dockerImageTag: 1.0.0
+  dockerImageTag: 1.1.0
   dockerRepository: airbyte/source-microsoft-teams
   githubIssueLabel: source-microsoft-teams
   icon: microsoft-teams.svg
   license: MIT
-  name: Microsoft teams
-  remoteRegistries:
-    pypi:
-      enabled: true
-      packageName: airbyte-source-microsoft-teams
-  registries:
-    cloud:
-      enabled: true
-    oss:
-      enabled: true
+  name: Microsoft Teams
+  releaseDate: 2020-12-21
+  releaseStage: alpha
   releases:
     breakingChanges:
       1.0.0:
@@ -25,13 +35,9 @@ data:
           A full schema refresh is required to upgrade to this version.
           For more details, see our <a href='https://docs.airbyte.io/integrations/sources/microsoft-teams-migrations'>migration guide</a>.
         upgradeDeadline: "2024-01-24"
-  releaseStage: alpha
+  supportLevel: community
   documentationUrl: https://docs.airbyte.com/integrations/sources/microsoft-teams
   tags:
     - language:python
-    - cdk:python
-  ab_internal:
-    sl: 100
-    ql: 100
-  supportLevel: community
+    - cdk:low-code
 metadataSpecVersion: "1.0"