Wiki Update 6 + Infills order

[ianalexis]

This update will focus on:

Wiki + Tab.cpp:

• TENTATIVE Pending WIPs...
  • doc/print_settings/quality/quality_settings_wall_generator.md
    • Write pending descriptions
    • Tab.cpp
  • doc/calibration/cornering-calib.md
    • Write pending descriptions
    • Tab.cpp
  • doc/material_settings/seem.md
    • Write pending descriptions
    • Tab.cpp
  • doc/print_settings/strength/strength_settings_infill.md
    • Infill/Wall overlap
      • Description
      • SVG
      • Tab.cpp
    • Apply gap fill
      • Tab.cpp
    • Anchor
      • Tab.cpp
    • Internal solid infill
      • Tab.cpp
  • doc/print_settings/strength/strength_top-bottom_shells.md
    • Top/Bottom shell layers
    • Top/Bottom shell thickness
    • Top/Bottom surface pattern
      • Concentric
      • Rectilinear
      • Monotonic
      • Monotonic line
      • Aligned Rectilinear
      • Hilbert Curve
      • Archimedean Chords
      • Octagram Spiral
    • Top/Bottom solid infill/wall overlap
    • Tab.cpp
  • Check Pellet printer if merged before this is implemented
• Images++
  • Process
  • ???

Infill Reordering
To get them grouped in some "coherent" way.
Tentative categories : Basics infills > Cubic > Honeycomb / 2D > TPMS like > Concentrical/Esthetic > "Others" (Lightning)

Infill	Type	Current	New	Dif
Rectilinear	Basic	2	1	+1
Grid	Basic	3	2	+1
Line	Basic	5	3	+2
Triangles	Basic	7	4	+3
Tri-hexagon	Basic	8	5	+3
Aligned Rectilinear	Basic	13	6	+7
Cubic	Cubic	6	7	-1
Adaptive Cubic	Cubic	12	8	+4
Quarter Cubic	Cubic	22	9	+13
Support Cubic	Cubic	19	10	+9
Honeycomb	Honeycomb	11	11	0
3D Honeycomb	Honeycomb	15	12	+3
2D Honeycomb	Honeycomb	14	13	+1
2D Lattice	2D	4	14	-10
Gyroid	TPMS	9	15	-6
TPMS-D	TPMS	10	16	-6
Cross Hatch	TPMS	21	17	+4
Concentric	Esthetic	1	18	-17
Hilbert Curve	Esthetic	16	19	-3
Archimedean Chords	Esthetic	17	20	-3
Octagram Spiral	Esthetic	18	21	-3
Lightning	Others	20	22	-2