anychange to work sp501e with wled or create an open API for home assistant?

[DavidFFerreira]

anychange to work sp501e with wled or create an open API for home assistant?

[Operation760]

WLED and Home Assistant are working perfectly. You can either build and compile with WLED source using the 1m memory and away you go. Here's my write-up on WLED Wiki for supported hardware: https://github.com/Aircoookie/WLED/wiki/Compatible-hardware You won't be able to enable all interfaces, however. I can also upload a build for you as well. WLED is officially integrated into HA.

This repo is the original stock firmware, copied from flash of the SP501e and stored here in case you need to ever re-flash to stock from WLED. Honestly, I have no idea if WLED/HA is supported in the firmware, via API or some other protocol. I highly doubt it. I never installed the app on my handsets or connected it to my wifi with the stock image. I just wanted WLED in the SP501e form-factor as the hardware design is a step up from other LED controllers, IMHO.

[DavidFFerreira]

Hi there, Thnaks for your answer and for your time. Can you build and publish the WLED for it? I want this soo much, cause fairynest cant connect to HA Cheers

…

________________________________ De: Operation760 <[email protected]> Enviado: 26 de julho de 2020 22:02 Para: Operation760/SP501e-RGB-LED-Controller- <[email protected]> Cc: DavidFFerreira <[email protected]>; Author <[email protected]> Assunto: Re: [Operation760/SP501e-RGB-LED-Controller-] anychange to work sp501e with wled or create an open API for home assistant? (#1) WLED and Home Assistant are working perfectly. You can either build and compile with WLED source using the 1m memory and away you go. Here's my write-up on WLED Wiki for supported hardware: https://github.com/Aircoookie/WLED/wiki/Compatible-hardware<url> You won't be able to enable all interfaces, however. I can also upload a build for you as well. WLED is officially integrated into HA. This repo is the original stock firmware, copied from flash of the SP501e and stored here in case you need to ever re-flash to stock from WLED. Honestly, I have no idea if WLED/HA is supported in the firmware, via API or some other protocol. I highly doubt it. I never installed the app on my handsets or connected it to my wifi with the stock image. I just wanted WLED in the SP501e form-factor as the hardware design is a step up from other LED controllers, IMHO. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<#1 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AH3HH3KQFHDLG4EJHPA5UK3R5SKWHANCNFSM4PIBUBWQ>.

[Operation760]

Sure - can you solder and flash an image?

[DavidFFerreira]

Can you give me some instruction for solder and flash? xD Thnaks for your avaliability

…

________________________________ De: Operation760 <[email protected]> Enviado: 7 de agosto de 2020 15:52 Para: Operation760/SP501e-RGB-LED-Controller- <[email protected]> Cc: DavidFFerreira <[email protected]>; Author <[email protected]> Assunto: Re: [Operation760/SP501e-RGB-LED-Controller-] anychange to work sp501e with wled or create an open API for home assistant? (#1) Sure - can you solder and flash an image? — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<#1 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AH3HH3J74XQSH6ZA45UPZSLR7QIKBANCNFSM4PIBUBWQ>.

[DavidFFerreira]

Hi Operation any feedback?