KILLED. PRINTER HALTED

[nesalkiN]

Hello,

I see many changes in RCBugFix the last day. I used the new config and transferred my settings to the new config structure. Stuff has changed places. :)

Now, the printer halts on power on, after the splash screen I get "KILLED. PRINTER HALTED, Please reset."
I can't find what I need to change to get it working again. I used my older config straight off with the latest checkout and still getting the same message.

Log:

Recv: echo: M851 Z-1.00
Recv: Error:Printer halted. kill() called!

I have no "KILL_PIN" defined.

[thinkyhead]

Please post your configuration files. You can either Zip them together or append .txt to the filenames, and then Github will allow you to drop them on the reply field.

[nesalkiN]

This is my old config that I used with older RCBugFix:
Marlin.zip
Just dropping it in with the latest code kills the printer.

And this is my new configs:
Marlin_new.zip
Same kill with these.

Left pins and boards file out here.

[thinkyhead]

Think I got it! Applied the patch to the main branch.

BLTOUCH does a deploy/stow on initialization, and there was a glitch in the new bltouch-vs-heaters code. Should be good now!

[nesalkiN]

Ah, great. Thanks! Will try when done printing. 👍

Edit
Btw, almost no compiler warnings except:

C:\Users\Niklas\AppData\Local\Temp\arduino_build_661069\sketch\stepper.cpp: In static member function 'static void Stepper::babystep(AxisEnum, bool)':

C:\Users\Niklas\AppData\Local\Temp\arduino_build_661069\sketch\stepper.cpp:1320:13: warning: unused variable 'old_dir' [-Wunused-variable]

     uint8_t old_dir;

             ^

and

C:\Users\Niklas\AppData\Local\Temp\arduino_build_661069\sketch\temperature.cpp: In static member function 'static void Temperature::isr()':

C:\Users\Niklas\AppData\Local\Temp\arduino_build_661069\sketch\temperature.cpp:1621:58: warning: suggest parentheses around '+' inside '>>' [-Wparentheses]

           soft_pwm_fan[0] = (soft_pwm_fan[0] & pwm_mask) + fanSpeedSoftPwm[0] >> 1;

                                                          ^

[nesalkiN]

And it works! Thanks.

[nesalkiN]

Spoke to soon. Now it does not heat the bed.
The display show target temp 60 but the temperature does not change and the result is halted printer, heating failed. I have disabled the turning off bed and extruder while probing but I heat before probing.

[cbusillo]

I have the same issue. RCBugFix is up to date. Turning off BLTOUCH_HEATERS_OFF fixes it for now.

[nesalkiN]

I have BLTOUCH_HEATERS_OFF disabled but the bed or hotend does not heat up. Will try latest code now.

[nesalkiN]

Nope, no heating with BLTOUCH_HEATERS_OFF disabled. Can set target temp but the bed or hotend does not heat up. @bgort s fix did not help.