[Wrong picture]: TS0202_1 vs 809WZT

[posreg]

Link

https://pl.aliexpress.com/item/1005005338281792.html?pdp_npi=2%40dis%21PLN%21138%2C64z%C5%82%2195%2C66z%C5%82%21%21%21%21%21%40211b813c16837459879373110e339d%2112000032663003650%21btf&_t=pvid%3Ae7ffe8af-cf93-4d89-af91-33713d8d0f36&afTraceInfo=1005005338281792__pc__pcBridgePPC__xxxxxx__1683745988&spm=a2g0o.ppclist.product.mainProduct&gatewayAdapt=glo2pol

Model

809WZT

Description

Motion Sensor

Vendor

Tuya

Picture (link)

https://ibb.co/9Yvybsj

Database entry

{"id":13,"type":"EndDevice","ieeeAddr":"0xa4c1380f478120e0","nwkAddr":45992,"manufId":4417,"manufName":"_TZ3040_bb6xaihh","powerSource":"Battery","modelId":"TS0202","epList":[1],"endpoints":{"1":{"profId":260,"epId":1,"devId":1026,"inClusterList":[1,3,4,1280,0],"outClusterList":[4,6,4096,25,10],"clusters":{"genBasic":{"attributes":{"modelId":"TS0202","manufacturerName":"_TZ3040_bb6xaihh","powerSource":3,"zclVersion":3,"appVersion":72,"stackVersion":0,"hwVersion":1,"dateCode":""}},"ssIasZone":{"attributes":{"iasCieAddr":"0x00124b0014da4b33","zoneState":1}},"genPowerCfg":{"attributes":{"batteryPercentageRemaining":200}}},"binds":[{"cluster":1,"type":"endpoint","deviceIeeeAddress":"0x00124b0014da4b33","endpointID":1}],"configuredReportings":[{"cluster":1,"attrId":33,"minRepIntval":3600,"maxRepIntval":62000,"repChange":0}],"meta":{}}},"appVersion":72,"stackVersion":0,"hwVersion":1,"dateCode":"","zclVersion":3,"interviewCompleted":true,"meta":{"configured":491743244},"lastSeen":1683695415537,"defaultSendRequestWhen":"immediate"}

Notes

Model name taken from the box

[Koenkk]

Fixed!

Changes will be available in the dev branch in a few hours from now. (https://www.zigbee2mqtt.io/advanced/more/switch-to-dev-branch.html)

[kzajac83]

Hello

Just now so 17h after last post updated edge (uninstall, click check for updates and install egde again and launch it).

Unfourtunetly picture still old.

My data is
Zigbee Manufacturer
_TZ3040_bb6xaihh

so the same.

BTW occupancy_timeout probably not work correctly because if change from default 90s to 10s then after 10s from detect appear change to clear status (is correct) but device still wait some internal time to start detecting again.

[Koenkk]

@kzajac83 does it show the correct model in the frontend? (809WZT)

[posreg]

@kzajac83 does it show the correct model in the frontend? (809WZT)

it is still visible as TS0202_1

[Koenkk]

Made a mistake, fixed now.

Changes will be available in the dev branch in a few hours from now. (https://www.zigbee2mqtt.io/advanced/more/switch-to-dev-branch.html)

[kzajac83]

Thank you, now picture is correct on Edge and model too but link jump to not exist page / 404 error

https://www.zigbee2mqtt.io/devices/809WZT.html#tuya-809wzt

[Koenkk]

@kzajac83 device page will be generated after the next release (page does not exist since it is not supported in the latest release yet)

[kzajac83]

After yesterday release the web page appear however there is strange think, on edge all is working fine but on prod version 1.31.0-1 from yesterday there is "Support status: Not supported"

[Anashost]

@kzajac83 already fixed, until next release you can use this external converter which works perfectly: #17364 (comment)

[juandelarocha]

I have just bought a 809WZT and won't join my zigbee network. Zigbee2MQTT version is 1.35.1-1. Any advice?

[22nra]

I have just bought a 809WZT and won't join my zigbee network. Zigbee2MQTT version is 1.35.1-1. Any advice?

Yes I have same a similar problem, I did manage to get my TuYa 809WZT to pair fine at first. I was testing ver 1.35.1 & force removed the sensor but since then it will no longer pair any more. I tried clearing Z2M and it still wont pair, other Tuya sensors (temp/hum and door sensor) pair fine.

[Anashost]

Mine still works fine!

Does your's have the same info:

• Zigbee Model
  TS0202
• Zigbee Manufacturer
  _TZ3040_bb6xaihh

[22nra]

Hi @Anashost and @juandelarocha . I got my TuYa 809WZT to pair again today and it's back working fine. I had to move the sensor very close to the zigbee 2531 to get pairing to work. I might have an issue with my sensor as the linkquality was showing 1 then it jumped upto 92. Using latest ver1.35.1