Device Pairs as Incorrect Model

[NexGen-3D-Printing]

What happened?

Device paired as incorrect model:

• TS0001

Exposes only:

• power_on_behavior
• state

What did you expect to happen?

Device should have paired as:

• TS0001_switch_module

Device should expose:

• power_on_behavior
• state
• Switch_type

How to reproduce it (minimal and precise)

Unpair and Repair

Zigbee2MQTT version

1.29.0-dev commit: cf80134

Adapter firmware version

0x26580700

Adapter

ConBee2/RaspBee2

Debug log

No response

[Koenkk]

Can you provide the data/database.db entry of this device?

[NexGen-3D-Printing]

Hi Bud, not sure exactly where the start is for the device, so I just grabbed the last chunk of the data base, if you need anything else, let me know.

"TRADFRI control outlet","epList":[1,242],"endpoints":{"1":{"profId":260,"epId":1,"devId":266,"inClusterList":[0,3,${"id":47,"type":"Router","ieeeAddr":"0x00158d0003553cd0","nwkAddr":38303,"manufId":4151,"manufName":"LUMI","powerSource":"Mains (single phase)","modelId":"lumi.relay.c2acn01","epList":[1,2],"endpoints":{"1":{"profId":260,"epId":1,"devId":257,"inClusterList":[0,3,4,5,1,2,10,6,16,${"id":48,"type":"Router","ieeeAddr":"0xa4c138dd08ec3209","nwkAddr":36635,"manufId":4417,"manufName":"_TZ3000_gjrubzje","powerSource":"Mains (single phase)","modelId":"TS0001","epList":[1,242],"endpoints":{"1":{"profId":260,"epId":1,"devId":256,"inClusterList":[3,4,5,6,1794,2820,$

[Koenkk]

Fixed!

Changes will be available in the dev branch in a few hours from now. (https://www.zigbee2mqtt.io/advanced/more/switch-to-dev-branch.html)

[NexGen-3D-Printing]

Awesome, I'll test it out in the morning and provide feedback.

[NexGen-3D-Printing]

You sir, are a legend, updated and the device detected correctly and the switch type is fully functional.