Adding device HY368 from Thaleos vendor

[dydy777]

Hello,

It is my first use of github, so sorry if i am not in the good way to add a new device.

On my Jeedom i have since 2 year Radiator Valve from Aliexpress :

Link : https://fr.aliexpress.com/item/1005005902592109.html?spm=a2g0o.order_list.order_list_main.81.21ef5e5bQFQWPF&gatewayAdapt=glo2fra
Tuya TRV with vendor code _TZE200_cpmgn2cf

This valve are known in Z2M ;)

For 2 weeks I have benefited from aid from the French state to obtain connected equipment in order to reduce energy consumption.
Physically the same as my previous one from AliExpress, but not recognized for Z2M. Distributed by Thaleos-Connect.
The documentation : https://thaleos.com/wp-content/uploads/2024/05/Tete-thermostatique-1.pdf
The vendor code is : _TZE200_rndg81sf

Based on Tuya.js, i had make my own .js definition, i share it bellow :

const legacy = require('zigbee-herdsman-converters/lib/legacy');
const fz = {...require('zigbee-herdsman-converters/converters/fromZigbee'), legacy: require('zigbee-herdsman-converters/lib/legacy').fromZigbee};
const tz = {...require('zigbee-herdsman-converters/converters/toZigbee'), legacy: require('zigbee-herdsman-converters/lib/legacy').toZigbee};
const exposes = require('zigbee-herdsman-converters/lib/exposes');
const reporting = require('zigbee-herdsman-converters/lib/reporting');
const ota = require('zigbee-herdsman-converters/lib/ota');
const utils = require('zigbee-herdsman-converters/lib/utils');
const globalStore = require('zigbee-herdsman-converters/lib/store');
const tuya = require('zigbee-herdsman-converters/lib/tuya');
const e = exposes.presets;
const ea = exposes.access;

const definition = {
  	zigbeeModel: ['kud7u2l'],
    fingerprint: [
            {modelID: 'TS0601', manufacturerName: '_TZE200_rndg81sf'}, //Thaleos Connect
        ],
    model: 'TS0601_thermostat',
    vendor: 'Tuya',
    description: 'Radiator valve with thermostat', 
    meta: {tuyaThermostatPreset: legacy.thermostatPresets, tuyaThermostatSystemMode: legacy.thermostatSystemModes3},
    ota: ota.zigbeeOTA,
    onEvent: tuya.onEventSetLocalTime,
    fromZigbee: [legacy.fromZigbee.tuya_thermostat, fz.ignore_basic_report, fz.ignore_tuya_set_time],
    toZigbee: [
            legacy.toZigbee.tuya_thermostat_child_lock,
            legacy.toZigbee.tuya_thermostat_window_detection,
            legacy.toZigbee.tuya_thermostat_valve_detection,
            legacy.toZigbee.tuya_thermostat_current_heating_setpoint,
            legacy.toZigbee.tuya_thermostat_auto_lock,
            legacy.toZigbee.tuya_thermostat_calibration,
            legacy.toZigbee.tuya_thermostat_min_temp,
            legacy.toZigbee.tuya_thermostat_max_temp,
            legacy.toZigbee.tuya_thermostat_boost_time,
            legacy.toZigbee.tuya_thermostat_comfort_temp,
            legacy.toZigbee.tuya_thermostat_eco_temp,
            legacy.toZigbee.tuya_thermostat_force_to_mode,
            legacy.toZigbee.tuya_thermostat_force,
            legacy.toZigbee.tuya_thermostat_preset,
            legacy.toZigbee.tuya_thermostat_window_detect,
            legacy.toZigbee.tuya_thermostat_schedule,
            legacy.toZigbee.tuya_thermostat_week,
            legacy.toZigbee.tuya_thermostat_schedule_programming_mode,
            legacy.toZigbee.tuya_thermostat_away_mode,
            legacy.toZigbee.tuya_thermostat_away_preset,
        ],
        exposes: [
            e.child_lock(),
            e.window_detection(),
            e.binary('window_open', ea.STATE, true, false).withDescription('Window open?'),
            e.battery_low(),
            e.valve_detection(),
            e.position(),
            e
                .climate()
                .withSetpoint('current_heating_setpoint', 5, 35, 0.5, ea.STATE_SET)
                .withLocalTemperature(ea.STATE)
                .withSystemMode(
                    ['heat', 'auto', 'off'],
                    ea.STATE_SET,
                    'Mode of this device, in the `heat` mode the TS0601 will remain continuously heating, i.e. it does not regulate ' +
                        'to the desired temperature. If you want TRV to properly regulate the temperature you need to use mode `auto` ' +
                        'instead setting the desired temperature.',
                )
                .withLocalTemperatureCalibration(-9, 9, 0.5, ea.STATE_SET)
                .withPreset(['schedule', 'manual', 'boost', 'complex', 'comfort', 'eco', 'away'])
                .withRunningState(['idle', 'heat'], ea.STATE),
            e.auto_lock(),
            e.away_mode(),
            e.away_preset_days(),
            e.boost_time(),
            e.comfort_temperature(),
            e.eco_temperature(),
            e.force(),
            e.max_temperature().withValueMin(16).withValueMax(70),
            e.min_temperature(),
            e.away_preset_temperature(),
            e.week(),
            e
                .text('workdays_schedule', ea.STATE_SET)
                .withDescription('Workdays schedule, 6 entries max, example: "00:20/5°C 01:20/5°C 6:59/15°C 18:00/5°C 20:00/5°C 23:30/5°C"'),
            e
                .text('holidays_schedule', ea.STATE_SET)
                .withDescription('Holidays schedule, 6 entries max, example: "00:20/5°C 01:20/5°C 6:59/15°C 18:00/5°C 20:00/5°C 23:30/5°C"'),
        ],
  		//extend: [],
};

module.exports = definition;

For me it is my first "dev" in jeedom, my valve thaleos look working fine with that. i hope you can check and validate, but i thinks this vendor code could be added to the original liste for this physical device in tuya.js

{
        zigbeeModel: ['kud7u2l'],
        fingerprint: [
            {modelID: 'TS0601', manufacturerName: '_TZE200_ckud7u2l'},
            {modelID: 'TS0601', manufacturerName: '_TZE200_ywdxldoj'},
            {modelID: 'TS0601', manufacturerName: '_TZE200_do5qy8zo'},
            {modelID: 'TS0601', manufacturerName: '_TZE200_cwnjrr72'},
            {modelID: 'TS0601', manufacturerName: '_TZE200_pvvbommb'},
            {modelID: 'TS0601', manufacturerName: '_TZE200_9sfg7gm0'}, // HomeCloud
            {modelID: 'TS0601', manufacturerName: '_TZE200_2atgpdho'}, // HY367
            {modelID: 'TS0601', manufacturerName: '_TZE200_cpmgn2cf'},
            {modelID: 'TS0601', manufacturerName: '_TZE200_znlqjmih'},
            {modelID: 'TS0601', manufacturerName: '_TZE200_8thwkzxl'}, // Tervix eva2
            {modelID: 'TS0601', manufacturerName: '_TZE200_4eeyebrt'}, // Immax 07732B
            {modelID: 'TS0601', manufacturerName: '_TZE200_8whxpsiw'}, // EVOLVEO
            {modelID: 'TS0601', manufacturerName: '_TZE200_xby0s3ta'}, // Sandy Beach HY367
            {modelID: 'TS0601', manufacturerName: '_TZE200_7fqkphoq'}, // AFINTEK
            {modelID: 'TS0601', manufacturerName: '_TZE200_rufdtfyv'},
            {modelID: 'TS0601', manufacturerName: '_TZE200_lpwgshtl'},
            {modelID: 'TS0601', manufacturerName: '_TZE200_rk1wojce'}, // Emos P5630S
        ],
        model: 'TS0601_thermostat',
        vendor: 'Tuya',
        description: 'Radiator valve with thermostat',
        whiteLabel: [
            {vendor: 'Moes', model: 'HY368'},
            {vendor: 'Moes', model: 'HY369RT'},
            {vendor: 'SHOJZJ', model: '378RT'},
            {vendor: 'Silvercrest', model: 'TVR01'},
            {vendor: 'Immax', model: '07732B'},
            tuya.whitelabel('Immax', '07732L', 'Radiator valve with thermostat', ['_TZE200_rufdtfyv']),
            {vendor: 'Evolveo', model: 'Heat M30'},
            tuya.whitelabel('Emos', 'P5630S', 'Radiator valve with thermostat', ['_TZE200_rk1wojce']),
        ],
        meta: {tuyaThermostatPreset: legacy.thermostatPresets, tuyaThermostatSystemMode: legacy.thermostatSystemModes3},
        ota: ota.zigbeeOTA,
        onEvent: tuya.onEventSetLocalTime,
        fromZigbee: [legacy.fromZigbee.tuya_thermostat, fz.ignore_basic_report, fz.ignore_tuya_set_time],
        toZigbee: [
            legacy.toZigbee.tuya_thermostat_child_lock,
            legacy.toZigbee.tuya_thermostat_window_detection,
            legacy.toZigbee.tuya_thermostat_valve_detection,
            legacy.toZigbee.tuya_thermostat_current_heating_setpoint,
            legacy.toZigbee.tuya_thermostat_auto_lock,
            legacy.toZigbee.tuya_thermostat_calibration,
            legacy.toZigbee.tuya_thermostat_min_temp,
            legacy.toZigbee.tuya_thermostat_max_temp,
            legacy.toZigbee.tuya_thermostat_boost_time,
            legacy.toZigbee.tuya_thermostat_comfort_temp,
            legacy.toZigbee.tuya_thermostat_eco_temp,
            legacy.toZigbee.tuya_thermostat_force_to_mode,
            legacy.toZigbee.tuya_thermostat_force,
            legacy.toZigbee.tuya_thermostat_preset,
            legacy.toZigbee.tuya_thermostat_window_detect,
            legacy.toZigbee.tuya_thermostat_schedule,
            legacy.toZigbee.tuya_thermostat_week,
            legacy.toZigbee.tuya_thermostat_schedule_programming_mode,
            legacy.toZigbee.tuya_thermostat_away_mode,
            legacy.toZigbee.tuya_thermostat_away_preset,
        ],
        exposes: [
            e.child_lock(),
            e.window_detection(),
            e.binary('window_open', ea.STATE, true, false).withDescription('Window open?'),
            e.battery_low(),
            e.valve_detection(),
            e.position(),
            e
                .climate()
                .withSetpoint('current_heating_setpoint', 5, 35, 0.5, ea.STATE_SET)
                .withLocalTemperature(ea.STATE)
                .withSystemMode(
                    ['heat', 'auto', 'off'],
                    ea.STATE_SET,
                    'Mode of this device, in the `heat` mode the TS0601 will remain continuously heating, i.e. it does not regulate ' +
                        'to the desired temperature. If you want TRV to properly regulate the temperature you need to use mode `auto` ' +
                        'instead setting the desired temperature.',
                )
                .withLocalTemperatureCalibration(-9, 9, 0.5, ea.STATE_SET)
                .withPreset(['schedule', 'manual', 'boost', 'complex', 'comfort', 'eco', 'away'])
                .withRunningState(['idle', 'heat'], ea.STATE),
            e.auto_lock(),
            e.away_mode(),
            e.away_preset_days(),
            e.boost_time(),
            e.comfort_temperature(),
            e.eco_temperature(),
            e.force(),
            e.max_temperature().withValueMin(16).withValueMax(70),
            e.min_temperature(),
            e.away_preset_temperature(),
            e.week(),
            e
                .text('workdays_schedule', ea.STATE_SET)
                .withDescription('Workdays schedule, 6 entries max, example: "00:20/5°C 01:20/5°C 6:59/15°C 18:00/5°C 20:00/5°C 23:30/5°C"'),
            e
                .text('holidays_schedule', ea.STATE_SET)
                .withDescription('Holidays schedule, 6 entries max, example: "00:20/5°C 01:20/5°C 6:59/15°C 18:00/5°C 20:00/5°C 23:30/5°C"'),
        ],
    },

Thanks all contributors and devs, your different topics, permitted to me, to make usable my radiator valve ;)

[Koenkk]

Added, thanks!

Changes will be available in the dev branch in a few hours from now.

[kostya-fr]

Hello,
I got same French valves by Thaleos-Connect, but I have another deffinition :

const definition = {
    zigbeeModel: ['TS0601'],
    model: 'TS0601',
    vendor: '_TZE200_rv6iuyxb',
    description: 'Automatically generated definition',
    extend: [],
    meta: {},
};

So I tried the same file /config/zigbee2mqtt/TS0601.js :

zigbeeModel: ['TS0601'],
const legacy = require('zigbee-herdsman-converters/lib/legacy');
const fz = {...require('zigbee-herdsman-converters/converters/fromZigbee'), legacy: require('zigbee-herdsman-converters/lib/legacy').fromZigbee};
const tz = {...require('zigbee-herdsman-converters/converters/toZigbee'), legacy: require('zigbee-herdsman-converters/lib/legacy').toZigbee};
const exposes = require('zigbee-herdsman-converters/lib/exposes');
const reporting = require('zigbee-herdsman-converters/lib/reporting');
const ota = require('zigbee-herdsman-converters/lib/ota');
const utils = require('zigbee-herdsman-converters/lib/utils');
const globalStore = require('zigbee-herdsman-converters/lib/store');
const tuya = require('zigbee-herdsman-converters/lib/tuya');
const e = exposes.presets;
const ea = exposes.access;

const definition = {
  	zigbeeModel: ['TS0601'],
    fingerprint: [
            {modelID: 'TS0601', manufacturerName: '_TZE200_rv6iuyxb'}, //Thaleos Connect
        ],
    model: 'TS0601_thermostat',
    vendor: 'Tuya',
    description: 'Radiator valve with thermostat', 
    meta: {tuyaThermostatPreset: legacy.thermostatPresets, tuyaThermostatSystemMode: legacy.thermostatSystemModes3},
    ota: ota.zigbeeOTA,
    onEvent: tuya.onEventSetLocalTime,
    fromZigbee: [legacy.fromZigbee.tuya_thermostat, fz.ignore_basic_report, fz.ignore_tuya_set_time],
    toZigbee: [
            legacy.toZigbee.tuya_thermostat_child_lock,
            legacy.toZigbee.tuya_thermostat_window_detection,
            legacy.toZigbee.tuya_thermostat_valve_detection,
            legacy.toZigbee.tuya_thermostat_current_heating_setpoint,
            legacy.toZigbee.tuya_thermostat_auto_lock,
            legacy.toZigbee.tuya_thermostat_calibration,
            legacy.toZigbee.tuya_thermostat_min_temp,
            legacy.toZigbee.tuya_thermostat_max_temp,
            legacy.toZigbee.tuya_thermostat_boost_time,
            legacy.toZigbee.tuya_thermostat_comfort_temp,
            legacy.toZigbee.tuya_thermostat_eco_temp,
            legacy.toZigbee.tuya_thermostat_force_to_mode,
            legacy.toZigbee.tuya_thermostat_force,
            legacy.toZigbee.tuya_thermostat_preset,
            legacy.toZigbee.tuya_thermostat_window_detect,
            legacy.toZigbee.tuya_thermostat_schedule,
            legacy.toZigbee.tuya_thermostat_week,
            legacy.toZigbee.tuya_thermostat_schedule_programming_mode,
            legacy.toZigbee.tuya_thermostat_away_mode,
            legacy.toZigbee.tuya_thermostat_away_preset,
        ],
        exposes: [
            e.child_lock(),
            e.window_detection(),
            e.binary('window_open', ea.STATE, true, false).withDescription('Window open?'),
            e.battery_low(),
            e.valve_detection(),
            e.position(),
            e
                .climate()
                .withSetpoint('current_heating_setpoint', 5, 35, 0.5, ea.STATE_SET)
                .withLocalTemperature(ea.STATE)
                .withSystemMode(
                    ['heat', 'auto', 'off'],
                    ea.STATE_SET,
                    'Mode of this device, in the `heat` mode the TS0601 will remain continuously heating, i.e. it does not regulate ' +
                        'to the desired temperature. If you want TRV to properly regulate the temperature you need to use mode `auto` ' +
                        'instead setting the desired temperature.',
                )
                .withLocalTemperatureCalibration(-9, 9, 0.5, ea.STATE_SET)
                .withPreset(['schedule', 'manual', 'boost', 'complex', 'comfort', 'eco', 'away'])
                .withRunningState(['idle', 'heat'], ea.STATE),
            e.auto_lock(),
            e.away_mode(),
            e.away_preset_days(),
            e.boost_time(),
            e.comfort_temperature(),
            e.eco_temperature(),
            e.force(),
            e.max_temperature().withValueMin(16).withValueMax(70),
            e.min_temperature(),
            e.away_preset_temperature(),
            e.week(),
            e
                .text('workdays_schedule', ea.STATE_SET)
                .withDescription('Workdays schedule, 6 entries max, example: "00:20/5°C 01:20/5°C 6:59/15°C 18:00/5°C 20:00/5°C 23:30/5°C"'),
            e
                .text('holidays_schedule', ea.STATE_SET)
                .withDescription('Holidays schedule, 6 entries max, example: "00:20/5°C 01:20/5°C 6:59/15°C 18:00/5°C 20:00/5°C 23:30/5°C"'),
        ],
};

module.exports = definition;
            

But it doesn't work for me. I added to zigbee2mqtt config :

external_converters:
  - /config/zigbee2mqtt/TS0601.js

after restarting zigbee2mqtt and adding device I keep message :

info 2024-10-02 02:01:05z2m: Successfully interviewed '0xa4cxxxxxxxxxxxxxxx', device has successfully been paired
warning 2024-10-02 02:01:05z2m: Device '0xa4cxxxxxxxxxxxxxxx' with Zigbee model 'TS0601' and manufacturer name '_TZE200_rv6iuyxb' is NOT supported, please follow https://www.zigbee2mqtt.io/advanced/support-new-devices/01_support_new_devices.html
info 2024-10-02 02:01:06z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/event', payload '{"data":{"friendly_name":"0xa4cxxxxxxxxxxxxxxx","ieee_address":"0xa4cxxxxxxxxxxxxxxx","status":"successful","supported":false},"type":"device_interview"}'

Should I open another topic ?