Process completed with exit code 1.

Process completed with exit code 1.

use of undeclared identifier 'uaddr'

redefinition of 'start'

invalid .org offset '18346' (at offset '18350')

invalid .org offset '18330' (at offset '18334')

instruction requires the following: 'Zba' (Address Generation Instructions)

instruction requires the following: 'Zba' (Address Generation Instructions)

instruction requires the following: 'Zba' (Address Generation Instructions)

instruction requires the following: 'Zba' (Address Generation Instructions)

instruction requires the following: 'Zba' (Address Generation Instructions)

instruction requires the following: 'Zba' (Address Generation Instructions)

use of undeclared identifier 'uaddr'

redefinition of 'start'

Process completed with exit code 1.

use of undeclared identifier 'uaddr'

redefinition of 'start'

Process completed with exit code 1.

invalid .org offset '18856' (at offset '18860')

invalid .org offset '18840' (at offset '18844')

instruction requires the following: 'Zba' (Address Generation Instructions)

instruction requires the following: 'Zba' (Address Generation Instructions)

instruction requires the following: 'Zba' (Address Generation Instructions)

instruction requires the following: 'Zba' (Address Generation Instructions)

instruction requires the following: 'Zba' (Address Generation Instructions)

instruction requires the following: 'Zba' (Address Generation Instructions)

use of undeclared identifier 'uaddr'

redefinition of 'start'

invalid .org offset '18402' (at offset '18406')

invalid .org offset '18386' (at offset '18390')

instruction requires the following: 'Zba' (Address Generation Instructions)

instruction requires the following: 'Zba' (Address Generation Instructions)

instruction requires the following: 'Zba' (Address Generation Instructions)

instruction requires the following: 'Zba' (Address Generation Instructions)

instruction requires the following: 'Zba' (Address Generation Instructions)

instruction requires the following: 'Zba' (Address Generation Instructions)

use of undeclared identifier 'uaddr'

redefinition of 'start'

Process completed with exit code 1.

'uuid/uuid.h' file not found

'uuid/uuid.h' file not found

Process completed with exit code 1.

call to __read_overflow marked "dontcall-error": detected read beyond size of object (1st parameter)

Process completed with exit code 1.

call to __read_overflow marked "dontcall-error": detected read beyond size of object (1st parameter)

'uuid/uuid.h' file not found

'uuid/uuid.h' file not found

Process completed with exit code 1.

'uuid/uuid.h' file not found

'uuid/uuid.h' file not found

invalid .org offset '52252' (at offset '52256')

invalid .org offset '52236' (at offset '52240')

invalid .org offset '52220' (at offset '52224')

instruction requires the following: 'Zba' (Address Generation Instructions)

instruction requires the following: 'Zba' (Address Generation Instructions)

instruction requires the following: 'Zba' (Address Generation Instructions)

instruction requires the following: 'Zba' (Address Generation Instructions)

instruction requires the following: 'Zba' (Address Generation Instructions)

use of undeclared identifier 'uaddr'

redefinition of 'start'

Process completed with exit code 1.

'uuid/uuid.h' file not found

'uuid/uuid.h' file not found

nic ftgmac100.1 has no peer

nic ftgmac100.0 has no peer

nic ftgmac100.1 has no peer

nic ftgmac100.0 has no peer

drivers/net/wireless/mediatek/mt76/mt7921/debugfs.c:92:0: stack frame size (2112) exceeds limit (2048) in function 'mt7921_txpwr'

objtool: acpi_idle_do_entry+0x4: call to perf_lopwr_cb() leaves .noinstr.text section

objtool: irqentry_nmi_exit+0x25: call to lockdep_hardirqs_on() leaves .noinstr.text section

objtool: irqentry_nmi_enter+0x4: call to lockdep_off() leaves .noinstr.text section

objtool: irqentry_exit+0x59: call to lockdep_hardirqs_on() leaves .noinstr.text section

objtool: irqentry_enter+0x37: call to lockdep_hardirqs_off() leaves .noinstr.text section

objtool: exc_nmi+0x13: call to sev_es_nmi_complete() leaves .noinstr.text section

TCG doesn't support requested feature, cap-ccf-assist=on

TCG doesn't support requested feature, cap-ibs=workaround

TCG doesn't support requested feature, cap-cfpc=workaround

unknown option, expected 'push', 'pop', 'rvc', 'norvc', 'relax' or 'norelax' [-Winline-asm]

unknown option, expected 'push', 'pop', 'rvc', 'norvc', 'relax' or 'norelax' [-Winline-asm]

unknown option, expected 'push', 'pop', 'rvc', 'norvc', 'relax' or 'norelax' [-Winline-asm]

unknown option, expected 'push', 'pop', 'rvc', 'norvc', 'relax' or 'norelax' [-Winline-asm]

unknown option, expected 'push', 'pop', 'rvc', 'norvc', 'relax' or 'norelax' [-Winline-asm]

unknown option, expected 'push', 'pop', 'rvc', 'norvc', 'relax' or 'norelax' [-Winline-asm]

vmlinux has a LOAD segment with RWX permissions

.tmp_vmlinux2 has a LOAD segment with RWX permissions

.tmp_vmlinux1 has a LOAD segment with RWX permissions

stack frame size (1032) exceeds limit (1024) in 'do_sys_poll' [-Wframe-larger-than]

stack frame size (1032) exceeds limit (1024) in 'mas_wr_spanning_store' [-Wframe-larger-than]

stack frame size (1064) exceeds limit (1024) in 'mas_wr_store_entry' [-Wframe-larger-than]

clone3() entry point is missing, please fix [-W#warnings]

stack frame size (1032) exceeds limit (1024) in 'bch2_fs_ioctl' [-Wframe-larger-than]

call to '__write_overflow_field' declared with 'warning' attribute: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning]

objtool: vhci_coredump_hdr() falls through to next function vhci_open_timeout()

objtool: jme_check_link() falls through to next function jme_powersave_phy()

call to '__write_overflow_field' declared with 'warning' attribute: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning]

unknown option, expected 'push', 'pop', 'rvc', 'norvc', 'relax' or 'norelax' [-Winline-asm]

unknown option, expected 'push', 'pop', 'rvc', 'norvc', 'relax' or 'norelax' [-Winline-asm]

unknown option, expected 'push', 'pop', 'rvc', 'norvc', 'relax' or 'norelax' [-Winline-asm]

unknown option, expected 'push', 'pop', 'rvc', 'norvc', 'relax' or 'norelax' [-Winline-asm]

unknown option, expected 'push', 'pop', 'rvc', 'norvc', 'relax' or 'norelax' [-Winline-asm]

unknown option, expected 'push', 'pop', 'rvc', 'norvc', 'relax' or 'norelax' [-Winline-asm]

unknown option, expected 'push', 'pop', 'rvc', 'norvc', 'relax' or 'norelax' [-Winline-asm]

unknown option, expected 'push', 'pop', 'rvc', 'norvc', 'relax' or 'norelax' [-Winline-asm]

unknown option, expected 'push', 'pop', 'rvc', 'norvc', 'relax' or 'norelax' [-Winline-asm]

unknown option, expected 'push', 'pop', 'rvc', 'norvc', 'relax' or 'norelax' [-Winline-asm]

unknown option, expected 'push', 'pop', 'rvc', 'norvc', 'relax' or 'norelax' [-Winline-asm]

unknown option, expected 'push', 'pop', 'rvc', 'norvc', 'relax' or 'norelax' [-Winline-asm]

objtool: vhci_coredump_hdr() falls through to next function vhci_open_timeout()

objtool: jme_check_link() falls through to next function jme_powersave_phy()

clone3() entry point is missing, please fix [-W#warnings]

stack frame size (1048) exceeds limit (1024) in 'qede_fill_by_demand_stats' [-Wframe-larger-than]

stack frame size (1080) exceeds limit (1024) in 'bch2_fs_ioctl' [-Wframe-larger-than]

stack frame size (2176) exceeds limit (2048) in 'qed_mfw_process_tlv_req' [-Wframe-larger-than]

stack frame size (27824) exceeds limit (2048) in 'print_nix_rq_ctx' [-Wframe-larger-than]

stack frame size (22224) exceeds limit (2048) in 'print_nix_sq_ctx' [-Wframe-larger-than]

stack frame size (2336) exceeds limit (2048) in 'ibmvnic_tasklet' [-Wframe-larger-than]

stack frame size (2208) exceeds limit (2048) in 'FlashPoint_HandleInterrupt' [-Wframe-larger-than]

stack frame size (5424) exceeds limit (2048) in 'nicvf_cq_intr_handler' [-Wframe-larger-than]

stack frame size (1048) exceeds limit (1024) in 'qede_fill_by_demand_stats' [-Wframe-larger-than]

stack frame size (1080) exceeds limit (1024) in 'bch2_fs_ioctl' [-Wframe-larger-than]

objtool: at91_adc_probe: unexpected end of section .text.at91_adc_probe

objtool: rtl2832_sdr_try_fmt_sdr_cap: unexpected end of section .text.rtl2832_sdr_try_fmt_sdr_cap

objtool: rtl2832_sdr_s_fmt_sdr_cap: unexpected end of section .text.rtl2832_sdr_s_fmt_sdr_cap

objtool: msi2500_try_fmt_sdr_cap: unexpected end of section .text.msi2500_try_fmt_sdr_cap

objtool: msi2500_s_fmt_sdr_cap: unexpected end of section .text.msi2500_s_fmt_sdr_cap

objtool: mt9t112_set_params: unexpected end of section .text.mt9t112_set_params

objtool: mt9t112_set_fmt: unexpected end of section .text.mt9t112_set_fmt

unknown option, expected 'push', 'pop', 'rvc', 'norvc', 'relax' or 'norelax' [-Winline-asm]

unknown option, expected 'push', 'pop', 'rvc', 'norvc', 'relax' or 'norelax' [-Winline-asm]

unknown option, expected 'push', 'pop', 'rvc', 'norvc', 'relax' or 'norelax' [-Winline-asm]

unknown option, expected 'push', 'pop', 'rvc', 'norvc', 'relax' or 'norelax' [-Winline-asm]