Issues with VTX Foxeer Reaper Infinity on Plane.

[IvanLeu]

Bug report

Hello! I've been stuck for a while trying to make Foxeer Reaper Infinity 5W work with Ardupilot and SpeedyBeeF405WING. Seems like the VTX doesn't respond to the commands or the firmware doesn't see it:
Here is the log:
14.04.2025 11:40:25 : send command 'r': 0
14.04.2025 11:40:25 : send command 'r': 0
14.04.2025 11:40:24 : send command 'r': 0
14.04.2025 11:40:24 : send command 'r': 0
14.04.2025 11:40:24 : send command 'r': 0
14.04.2025 11:40:24 : send command 'r': 0
14.04.2025 11:40:24 : send command 'r': 0
14.04.2025 11:40:23 : send command 'r': 0
14.04.2025 11:40:23 : send command 'r': 0
14.04.2025 11:40:23 : send command 'r': 0
14.04.2025 11:40:23 : send command 'r': 0
14.04.2025 11:40:22 : send command 'r': 0
14.04.2025 11:40:22 : send command 'r': 0
14.04.2025 11:40:22 : send command 'r': 0
14.04.2025 11:40:22 : send command 'r': 0
14.04.2025 11:40:22 : send command 'r': 0
14.04.2025 11:40:22 : send command 'r': 0
14.04.2025 11:40:22 : send command 'r': 0

I use the latest firmware from the website, I believe its Arduplane 4.5.7. I tested it on betaflight and it worked fine.
I attached my parameter list

Platform
[ ] All
[ ] AntennaTracker
[ ] Copter
[X] Plane
[ ] Rover
[ ] Submarine

[Ryanf55]

Can you please try again to attach parameters, and also bin logs if you have them? Normally, support requests should go on the forums.