[bcm config] remove scache_filename config entry (#2140)

yxieca · web-flow · commit 5ab66b191a4c · 2018-10-12T08:05:38.000-07:00
Warm boot is managed by SAI. This configuration entry shouldn't be
included in bcm config.

Signed-off-by: Ying Xie &lt;ying.xie@microsoft.com&gt;
diff --git a/device/accton/x86_64-accton_as5712_54x-r0/Accton-AS5712-54X/td2-as5712-72x10G.config.bcm b/device/accton/x86_64-accton_as5712_54x-r0/Accton-AS5712-54X/td2-as5712-72x10G.config.bcm
@@ -142,4 +142,3 @@ l3_max_ecmp_mode=1
 max_vp_lags=0
 
 stable_size=0x2000000
-scache_filename=/tmp/scache
diff --git a/device/arista/x86_64-arista_7050_qx32/Arista-7050-Q16S64/td2-a7050-qx32-16x40G+32x10G+8x40G.config.bcm b/device/arista/x86_64-arista_7050_qx32/Arista-7050-Q16S64/td2-a7050-qx32-16x40G+32x10G+8x40G.config.bcm
@@ -44,7 +44,6 @@ max_vp_lags=0
 miim_intr_enable=0
 mmu_lossless=0
 module_64ports=0
-scache_filename=/tmp/scache
 schan_intr_enable=0
 stable_size=0x2000000
 tdma_timeout_usec=5000000
diff --git a/device/arista/x86_64-arista_7050_qx32/Arista-7050-QX32/td2-a7050-qx32-32x40G.config.bcm b/device/arista/x86_64-arista_7050_qx32/Arista-7050-QX32/td2-a7050-qx32-32x40G.config.bcm
@@ -44,7 +44,6 @@ max_vp_lags=0
 miim_intr_enable=0
 mmu_lossless=0
 module_64ports=0
-scache_filename=/tmp/scache
 schan_intr_enable=0
 stable_size=0x2000000
 tdma_timeout_usec=5000000
diff --git a/device/arista/x86_64-arista_7050_qx32s/Arista-7050-QX-32S/td2-a7050-qx32s-32x40G.config.bcm b/device/arista/x86_64-arista_7050_qx32s/Arista-7050-QX-32S/td2-a7050-qx32s-32x40G.config.bcm
@@ -39,7 +39,6 @@ miim_intr_enable=0
 mmu_lossless=0
 module_64ports=0
 
-scache_filename=/tmp/scache
 stable_size=0x2000000
 
 schan_intr_enable=0
diff --git a/device/arista/x86_64-arista_7050_qx32s/Arista-7050QX-32S-S4Q31/td2-a7050-q31s4-31x40G-4x10G.config.bcm b/device/arista/x86_64-arista_7050_qx32s/Arista-7050QX-32S-S4Q31/td2-a7050-q31s4-31x40G-4x10G.config.bcm
@@ -210,7 +210,6 @@ portmap_101.0=117:40
 portmap_102.0=113:40
 portmap_103.0=1:40
 portmap_104.0=5:40
-scache_filename=/tmp/scache
 schan_intr_enable=0
 serdes_firmware_mode_1.0=2
 serdes_firmware_mode_5.0=2
diff --git a/device/arista/x86_64-arista_7260cx3_64/Arista-7260CX3-C64/th2-a7260cx3-64-64x100G.config.bcm b/device/arista/x86_64-arista_7260cx3_64/Arista-7260CX3-C64/th2-a7260cx3-64-64x100G.config.bcm
@@ -939,8 +939,6 @@ portmap_9=17:100
 robust_hash_disable_egress_vlan=1
 robust_hash_disable_mpls=1
 robust_hash_disable_vlan=1
-scache_filename=/tmp/scache
-scache_filename=/tmp/scache
 sram_scan_enable=0
 stable_size=0x5500000
 stable_size=0x5500000
diff --git a/device/arista/x86_64-arista_7260cx3_64/Arista-7260CX3-D108C8/th2-a7260cx3-64-112x50G+8x100G.config.bcm b/device/arista/x86_64-arista_7260cx3_64/Arista-7260CX3-D108C8/th2-a7260cx3-64-112x50G+8x100G.config.bcm
@@ -681,8 +681,6 @@ port_init_cl72_hg=1
 robust_hash_disable_egress_vlan=1
 robust_hash_disable_mpls=1
 robust_hash_disable_vlan=1
-scache_filename=/tmp/scache
-scache_filename=/tmp/scache
 sram_scan_enable=0
 stable_size=0x5500000
 stable_size=0x5500000
diff --git a/device/dell/x86_64-dell_s6000_s1220-r0/Force10-S6000/td2-s6000-32x40G.config.bcm b/device/dell/x86_64-dell_s6000_s1220-r0/Force10-S6000/td2-s6000-32x40G.config.bcm
@@ -29,7 +29,6 @@ max_vp_lags=0
 miim_intr_enable=0
 mmu_lossless=0
 module_64ports=0
-scache_filename=/tmp/scache
 schan_intr_enable=0
 stable_size=0x2000000
 tdma_timeout_usec=5000000
diff --git a/device/dell/x86_64-dell_z9100_c2538-r0/Force10-Z9100/th-z9100-32x100G.config.bcm b/device/dell/x86_64-dell_z9100_c2538-r0/Force10-Z9100/th-z9100-32x100G.config.bcm
@@ -13,8 +13,6 @@ os=unix
 parity_correction=1
 parity_enable=1
 
-scache_filename=/tmp/scache
-
 #Port configuration
 portmap_38=49:100
 portmap_39=53:100
diff --git a/device/dell/x86_64-dellemc_z9264f_c3538-r0/DellEMC-Z9264f/th2-z9264f-64x100G.config.bcm b/device/dell/x86_64-dellemc_z9264f_c3538-r0/DellEMC-Z9264f/th2-z9264f-64x100G.config.bcm
@@ -18,8 +18,6 @@ ipv6_lpm_128b_enable=1
 parity_correction=1
 parity_enable=1
 
-scache_filename=/tmp/scache
-
 dport_map_enable=1
 
 dport_map_enable=1
diff --git a/device/delta/x86_64-delta_ag9064-r0/Delta-ag9064/th2-ag9064-64x100G.config.bcm b/device/delta/x86_64-delta_ag9064-r0/Delta-ag9064/th2-ag9064-64x100G.config.bcm
@@ -797,7 +797,6 @@ phy_an_allow_pll_change_hg=0
 robust_hash_disable_egress_vlan=1
 robust_hash_disable_mpls=1
 robust_hash_disable_vlan=1
-scache_filename=/tmp/scache
 sram_scan_enable=0
 stable_size=0x5500000
 mmu_lossless=1
diff --git a/device/ingrasys/x86_64-ingrasys_s8810_32q-r0/INGRASYS-S8810-32Q/td2-s8810-32x40G.config.bcm b/device/ingrasys/x86_64-ingrasys_s8810_32q-r0/INGRASYS-S8810-32Q/td2-s8810-32x40G.config.bcm
@@ -2,7 +2,6 @@
 os=unix
 
 module_64ports=0
-scache_filename=/tmp/scache
 schan_intr_enable=0
 stable_size=0x2000000
 
diff --git a/device/ingrasys/x86_64-ingrasys_s8900_54xc-r0/INGRASYS-S8900-54XC/th-s8900-48x25G+6x100G.config.bcm b/device/ingrasys/x86_64-ingrasys_s8900_54xc-r0/INGRASYS-S8900-54XC/th-s8900-48x25G+6x100G.config.bcm
@@ -12,8 +12,6 @@ lpm_ipv6_128b_reserved=0
 parity_correction=1
 parity_enable=1
 
-scache_filename=/tmp/scach
-
 #PIPE0
 portmap_1=1:25
 portmap_2=2:25
diff --git a/device/ingrasys/x86_64-ingrasys_s8900_64xc-r0/INGRASYS-S8900-64XC/th-s8900-48x25G+16x100G.config.bcm b/device/ingrasys/x86_64-ingrasys_s8900_64xc-r0/INGRASYS-S8900-64XC/th-s8900-48x25G+16x100G.config.bcm
@@ -12,8 +12,6 @@ lpm_ipv6_128b_reserved=0
 parity_correction=1
 parity_enable=1
 
-scache_filename=/tmp/scach
-
 #PIPE0
 portmap_1=17:25
 portmap_2=18:25
diff --git a/device/ingrasys/x86_64-ingrasys_s9100-r0/INGRASYS-S9100-C32/th-s9100-32x100G.config.bcm b/device/ingrasys/x86_64-ingrasys_s9100-r0/INGRASYS-S9100-C32/th-s9100-32x100G.config.bcm
@@ -18,8 +18,6 @@ mmu_lossless=0
 parity_correction=1
 parity_enable=1
 
-scache_filename=/tmp/scach
-
 #PIPE0
 portmap_1=5:100
 portmap_2=1:100
diff --git a/src/sonic-device-data/tests/permitted_list b/src/sonic-device-data/tests/permitted_list
@@ -109,7 +109,6 @@ rate_ext_mdio_divisor
 robust_hash_disable_egress_vlan
 robust_hash_disable_mpls
 robust_hash_disable_vlan
-scache_filename
 schan_intr_enable
 schan_timeout_usec
 serdes_automed

Original file line number	Diff line number	Diff line change
`@@ -142,4 +142,3 @@ l3_max_ecmp_mode=1`
`142`	`142`	`max_vp_lags=0`
`143`	`143`
`144`	`144`	`stable_size=0x2000000`
`145`		`-scache_filename=/tmp/scache`