|
1 | | -/* |
2 | | - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio |
3 | | -
|
4 | | - Licensed under the Apache License, Version 2.0 (the "License"); |
5 | | - you may not use this file except in compliance with the License. |
6 | | - You may obtain a copy of the License at |
7 | | -
|
8 | | - http://www.apache.org/licenses/LICENSE-2.0 |
9 | | -
|
10 | | - Unless required by applicable law or agreed to in writing, software |
11 | | - distributed under the License is distributed on an "AS IS" BASIS, |
12 | | - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
13 | | - See the License for the specific language governing permissions and |
14 | | - limitations under the License. |
15 | | -*/ |
16 | | - |
17 | | -#ifndef _MCUCONF_H_ |
18 | | -#define _MCUCONF_H_ |
19 | | - |
20 | | -/* |
21 | | - * STM32F0xx drivers configuration. |
22 | | - * The following settings override the default settings present in |
23 | | - * the various device driver implementation headers. |
24 | | - * Note that the settings for each driver only have effect if the whole |
25 | | - * driver is enabled in halconf.h. |
| 1 | +/* Copyright 2020 QMK |
26 | 2 | * |
27 | | - * IRQ priorities: |
28 | | - * 3...0 Lowest...Highest. |
| 3 | + * This program is free software: you can redistribute it and/or modify |
| 4 | + * it under the terms of the GNU General Public License as published by |
| 5 | + * the Free Software Foundation, either version 2 of the License, or |
| 6 | + * (at your option) any later version. |
29 | 7 | * |
30 | | - * DMA priorities: |
31 | | - * 0...3 Lowest...Highest. |
32 | | - */ |
33 | | - |
34 | | -#define STM32F0xx_MCUCONF |
35 | | -// #define STM32F070xB |
36 | | - |
37 | | -/* |
38 | | - * HAL driver system settings. |
39 | | - */ |
40 | | -#define STM32_NO_INIT FALSE |
41 | | -#define STM32_PVD_ENABLE FALSE |
42 | | -#define STM32_PLS STM32_PLS_LEV0 |
43 | | -#define STM32_HSI_ENABLED TRUE |
44 | | -#define STM32_HSI14_ENABLED TRUE |
45 | | -#define STM32_HSI48_ENABLED FALSE |
46 | | -#define STM32_LSI_ENABLED TRUE |
47 | | -#define STM32_HSE_ENABLED FALSE |
48 | | -#define STM32_LSE_ENABLED FALSE |
49 | | -#define STM32_SW STM32_SW_PLL |
50 | | -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 |
51 | | -#define STM32_PREDIV_VALUE 1 |
52 | | -#define STM32_PLLMUL_VALUE 12 |
53 | | -#define STM32_HPRE STM32_HPRE_DIV1 |
54 | | -#define STM32_PPRE STM32_PPRE_DIV1 |
55 | | -#define STM32_ADCSW STM32_ADCSW_HSI14 |
56 | | -#define STM32_ADCPRE STM32_ADCPRE_DIV4 |
57 | | -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK |
58 | | -#define STM32_ADCPRE STM32_ADCPRE_DIV4 |
59 | | -#define STM32_ADCSW STM32_ADCSW_HSI14 |
60 | | -#define STM32_USBSW STM32_USBSW_HSI48 |
61 | | -#define STM32_CECSW STM32_CECSW_HSI |
62 | | -#define STM32_I2C1SW STM32_I2C1SW_HSI |
63 | | -#define STM32_USART1SW STM32_USART1SW_PCLK |
64 | | -#define STM32_RTCSEL STM32_RTCSEL_LSI |
65 | | - |
66 | | -/* |
67 | | - * ADC driver system settings. |
68 | | - */ |
69 | | -#define STM32_ADC_USE_ADC1 FALSE |
70 | | -#define STM32_ADC_ADC1_DMA_PRIORITY 2 |
71 | | -#define STM32_ADC_IRQ_PRIORITY 2 |
72 | | -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 |
73 | | - |
74 | | -/* |
75 | | - * EXT driver system settings. |
76 | | - */ |
77 | | -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 |
78 | | -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 |
79 | | -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 |
80 | | -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 |
81 | | -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 |
82 | | - |
83 | | -/* |
84 | | - * GPT driver system settings. |
85 | | - */ |
86 | | -#define STM32_GPT_USE_TIM1 FALSE |
87 | | -#define STM32_GPT_USE_TIM2 FALSE |
88 | | -#define STM32_GPT_USE_TIM3 FALSE |
89 | | -#define STM32_GPT_USE_TIM14 FALSE |
90 | | -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 |
91 | | -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 |
92 | | -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 |
93 | | -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 |
94 | | - |
95 | | -/* |
96 | | - * I2C driver system settings. |
97 | | - */ |
98 | | -#define STM32_I2C_USE_I2C1 FALSE |
99 | | -#define STM32_I2C_USE_I2C2 FALSE |
100 | | -#define STM32_I2C_BUSY_TIMEOUT 50 |
101 | | -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 |
102 | | -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 |
103 | | -#define STM32_I2C_USE_DMA FALSE |
104 | | -#define STM32_I2C_I2C1_DMA_PRIORITY 1 |
105 | | -#define STM32_I2C_I2C2_DMA_PRIORITY 1 |
106 | | -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) |
107 | | -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) |
108 | | -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") |
109 | | - |
110 | | -/* |
111 | | - * ICU driver system settings. |
112 | | - */ |
113 | | -#define STM32_ICU_USE_TIM1 FALSE |
114 | | -#define STM32_ICU_USE_TIM2 FALSE |
115 | | -#define STM32_ICU_USE_TIM3 FALSE |
116 | | -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 |
117 | | -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 |
118 | | -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 |
119 | | - |
120 | | -/* |
121 | | - * PWM driver system settings. |
122 | | - */ |
123 | | -#define STM32_PWM_USE_ADVANCED FALSE |
124 | | -#define STM32_PWM_USE_TIM1 FALSE |
125 | | -#define STM32_PWM_USE_TIM2 FALSE |
126 | | -#define STM32_PWM_USE_TIM3 FALSE |
127 | | -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 |
128 | | -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 |
129 | | -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 |
130 | | - |
131 | | -/* |
132 | | - * SERIAL driver system settings. |
| 8 | + * This program is distributed in the hope that it will be useful, |
| 9 | + * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 10 | + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 11 | + * GNU General Public License for more details. |
| 12 | + * |
| 13 | + * You should have received a copy of the GNU General Public License |
| 14 | + * along with this program. If not, see <http://www.gnu.org/licenses/>. |
133 | 15 | */ |
134 | | -#define STM32_SERIAL_USE_USART1 FALSE |
135 | | -#define STM32_SERIAL_USE_USART2 FALSE |
136 | | -#define STM32_SERIAL_USART1_PRIORITY 3 |
137 | | -#define STM32_SERIAL_USART2_PRIORITY 3 |
138 | 16 |
|
139 | 17 | /* |
140 | | - * SPI driver system settings. |
| 18 | + * This file was auto-generated by: |
| 19 | + * `qmk chibios-confupdate -i keyboards/acheron/arctic/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` |
141 | 20 | */ |
142 | | -#define STM32_SPI_USE_SPI1 FALSE |
143 | | -#define STM32_SPI_USE_SPI2 FALSE |
144 | | -#define STM32_SPI_SPI1_DMA_PRIORITY 1 |
145 | | -#define STM32_SPI_SPI2_DMA_PRIORITY 1 |
146 | | -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 |
147 | | -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 |
148 | | -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) |
149 | | -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) |
150 | | -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") |
151 | 21 |
|
152 | | -/* |
153 | | - * ST driver system settings. |
154 | | - */ |
155 | | -#define STM32_ST_IRQ_PRIORITY 2 |
156 | | -#define STM32_ST_USE_TIMER 2 |
| 22 | +#pragma once |
157 | 23 |
|
158 | | -/* |
159 | | - * UART driver system settings. |
160 | | - */ |
161 | | -#define STM32_UART_USE_USART1 FALSE |
162 | | -#define STM32_UART_USE_USART2 FALSE |
163 | | -#define STM32_UART_USART1_IRQ_PRIORITY 3 |
164 | | -#define STM32_UART_USART2_IRQ_PRIORITY 3 |
165 | | -#define STM32_UART_USART1_DMA_PRIORITY 0 |
166 | | -#define STM32_UART_USART2_DMA_PRIORITY 0 |
167 | | -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") |
| 24 | +#include_next <mcuconf.h> |
168 | 25 |
|
169 | | -/* |
170 | | - * USB driver system settings. |
171 | | - */ |
172 | | -#define STM32_USB_USE_USB1 TRUE |
173 | | -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE |
174 | | -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 |
| 26 | +#undef STM32_I2C_USE_DMA |
| 27 | +#define STM32_I2C_USE_DMA FALSE |
175 | 28 |
|
176 | | -#endif /* _MCUCONF_H_ */ |
0 commit comments