how to forward traffic/captured data from remote BT taps to the Nzyme server?

[sudo-joe]

Hello,

what's the recommended approach to forward "traffic" from remote BT-taps over LAN to the Nzyme server?

[lennartkoopmann]

What do you mean with "forward traffic"? The taps report Bluetooth data just like any other data types.

[sudo-joe]

->What do you mean with "forward traffic"?
Ok this was not clear enough. Would like to find out how to configure the nzyme-tap conf file of a remote BT-tap (RJ45 connected) to forward recorded BT-data to the Nzyme-server. Can't find infos about such a setup in the docs :(

[lennartkoopmann]

It's on the "Bluetooth" page in the documentation: https://docs.nzyme.org/bluetooth/

[sudo-joe]

How to configure several local BT adapters/sensors (hci0, hci1, hci2) is clear to me.

No need to configure the destination (where to send the recorded Bluetooth data) ? E.g. the IP of the Nzyme server?

[lennartkoopmann]

It will be sent to the general.leader_uri you configured, together with all other recorded data.

[sudo-joe]

Ok.. does that mean, for every Tap there will be a separate leader_secret (line)?

[general]
leader_secret = "p299buDBClOGoZM3ZEDJ1zIHoWuOHzM2uP5R3GXDBeaAQKQ2RTWKSVtXHGIBvePB"
leader_uri = "https://127.0.0.1:22900/"
accept_insecure_certs = true

[lennartkoopmann]

I'm not sure what you mean.

[sudo-joe]

Sorry forget the second line... Does this look correct for 2 BT-Taps?

[general]
leader_secret = "p299buDBClOGoZM3ZEDJ1zIHoWuOHzM2uP5R3GXDBeaAQKQ2RTWKSVtXHGIBvePB"
leader_secret = "a123buDBClOGoZM3ZEDJ1zIHoWuOHzM2uP5R3GXDBeaAQKQ2RTWKSVtXHGIBvePB"
leader_uri = "https://127.0.0.1:22900/"
accept_insecure_certs = tru

[lennartkoopmann]

I still don't understand. Why two leader_secret in one tap configuration file?

[sudo-joe]

Sorry it took me some time to understand how it works.

Thank you for the continued help!