clean up frame, add TFT35 V2.0

Author: Msq001

Copy to SD Card root directory to update/BIGTREE_TFT24_V1.1.21.bin

@@ -1,7 +1,8 @@
 #include "LCD_Encoder.h"
+#include "GPIO_Init.h"
 #include "includes.h"
 
-#ifdef LCD_ENCODER_SUPPORT
+#if LCD_ENCODER_SUPPORT
 
 int8_t encoderDirection = 1;
 volatile int8_t encoderDiff; // Updated in update_buttons, added to encoderPosition every LCD update
@@ -10,35 +11,29 @@ uint8_t buttons = 0;
 
 void LCD_EncoderInit(void)
 {
-  GPIO_TypeDef *encPort[] = {LCD_ENCA_PORT, LCD_ENCB_PORT, LCD_BTN_PORT};
-  uint16_t      encPin[]  = {LCD_ENCA_PIN,  LCD_ENCB_PIN,  LCD_BTN_PIN};
-  GPIO_InitTypeDef GPIO_InitStructure;
+  uint16_t encPin[]  = {LCD_ENCA_PIN,  LCD_ENCB_PIN,  LCD_BTN_PIN};
 
-  RCC_APB2PeriphClockCmd(LCD_ENCODER_RCC, ENABLE);
-  
-  for(u8 i = 0; i < aCount(encPort); i++)
+  for(u8 i = 0; i < aCount(encPin); i++)
   {
-    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU;
-    GPIO_InitStructure.GPIO_Pin = encPin[i];
-    GPIO_InitStructure.GPIO_Speed =GPIO_Speed_50MHz;
-    GPIO_Init(encPort[i], &GPIO_InitStructure);
+    GPIO_InitSet(encPin[i], MGPIO_MODE_IPU, 0);
   }
 }
 
 bool LCD_ReadEncA(void)
 {
-  return !GPIO_ReadInputDataBit(LCD_ENCA_PORT, LCD_ENCA_PIN);
+  return !GPIO_GetLevel(LCD_ENCA_PIN);
 }
+
 bool LCD_ReadEncB(void)
 {
-  return !GPIO_ReadInputDataBit(LCD_ENCB_PORT, LCD_ENCB_PIN);
+  return !GPIO_GetLevel(LCD_ENCB_PIN);
 }
 
 bool LCD_ReadBtn(uint8_t intervals)
 {
   static u32 nowTime = 0;
 
-  if(!GPIO_ReadInputDataBit(LCD_BTN_PORT, LCD_BTN_PIN))
+  if(!GPIO_GetLevel(LCD_BTN_PIN))
   {
     if(OS_GetTime() - nowTime > intervals)
     {
@@ -92,7 +87,8 @@ void LCD_LoopEncoder(void)
 }
 
 void loopCheckMode(void)
-{
+{  
+  if(isPrinting()) return;
   if(LCD_ReadBtn(LCD_CHANGE_MODE_INTERVALS))
   {
     infoMenu.menu[++infoMenu.cur] = menuMode;

Copy to SD Card root directory to update/BIGTREE_TFT24_V1.1.22.bin

@@ -2,7 +2,7 @@
 #define _LANGUAGE_H_
 
 #include "stdbool.h"
-#include "stm32f10x.h"
+#include "variants.h"
 
 
 enum

Copy to SD Card root directory to update/BIQU_TFT28_V1.0.21.bin

@@ -27,17 +27,17 @@
     #define JP_FAST_SPEED           "早め"
     #define JP_FAN_FULL_SPEED       "全速"
     #define JP_FAN_HALF_SPEED       "50%速さ"
-    #define JP_POWER_OFF            "Power Off"
+    #define JP_POWER_OFF            "電源OFF"
     #define JP_TOUCHSCREEN_ADJUST   "校正する"
     #define JP_SCREEN_INFO          "ついて"
     #define JP_DISCONNECT           "データ接続"
     #define JP_BAUDRATE_115200      "115200"
     #define JP_BAUDRATE_250000      "250000"
-    #define JP_PERCENTAGE           "Percentage"
-    #define JP_BABYSTEP             "BabyStep"
-    #define JP_PERCENTAGE_SPEED     "スビード%"
-    #define JP_PERCENTAGE_FLOW      "押出%"
-    #define JP_VALUE_ZERO           "Zero"
+    #define JP_PERCENTAGE           "パーセント"
+    #define JP_BABYSTEP             "ベビーステップ"
+    #define JP_PERCENTAGE_SPEED     "スビード"
+    #define JP_PERCENTAGE_FLOW      "押出"
+    #define JP_VALUE_ZERO           "ゼロ"
     #define JP_1_DEGREE             "1℃"
     #define JP_5_DEGREE             "5℃"
     #define JP_10_DEGREE            "10℃"
@@ -65,28 +65,28 @@
     #define JP_UNCONNECTED          "プリンターに連続していない!"
     #define JP_DISCONNECT_INFO      "SDカード　PC両用"
     #define JP_LOADING              "ロッド中..."
-    #define JP_POWER_FAILED         "Continue printing?"
+    #define JP_POWER_FAILED         "プリントを継続しますか?"
     #define JP_CONTINUE             "継続"
     #define JP_CANNEL               "キャンセル"
     #define JP_ADJUST_TITLE         "タッチスクリーン較正"
     #define JP_ADJUST_INFO          "赤星をタッチ"
     #define JP_ADJUST_OK            "校正が成功しました"
     #define JP_ADJUST_FAILED        "校正が失敗しました、も一度お試して下さい"
-    #define JP_WARNING              "Warning"
+    #define JP_WARNING              "注意"
     #define JP_STOP_PRINT           "プリントを中止しますか?"
-    #define JP_CONFIRM              "確定"
+    #define JP_CONFIRM              "OK"
 
     #define JP_TFTSD                "TFT SD"
     #define JP_READ_TFTSD_ERROR     "TFT SDカードの読み取りがエラー発生しました!"
     #define JP_TFTSD_INSERTED       "SDカード入りました!"
     #define JP_TFTSD_REMOVED        "SDカード出しました!"
 
-    #define JP_U_DISK               "U Disk"
-    #define JP_READ_U_DISK_ERROR    "Read U Disk error!"
+    #define JP_U_DISK               "USBメモリー"
+    #define JP_READ_U_DISK_ERROR    "USBメモリー読み込みエラー!"
     #define JP_U_DISK_INSERTED      "U Diskカード入りました!"
     #define JP_U_DISK_REMOVED       "U Diskカード出しました!"
 
-    #define JP_ONBOARDSD            "OnboardSD"
-    #define JP_READ_ONBOARDSD_ERROR "Onboard SDカードの読み取りがエラー発生しました!"
+    #define JP_ONBOARDSD            "内部 mSDカード"
+    #define JP_READ_ONBOARDSD_ERROR "内部 mSDカードの読み取りがエラー発生しました!"
 
 #endif

Copy to SD Card root directory to update/BIQU_TFT28_V1.0.22.bin

@@ -2,6 +2,7 @@
 #include "includes.h"
 #include "GUI.h"
 
+#ifdef ST7920_SPI
 
 ST7920_PIXEL       st7920 = {ST7920_XSTART, ST7920_YSTART, 0};
 ST7920_CTRL_STATUS status = ST7920_IDLE;
@@ -132,16 +133,17 @@ void menuST7920(void)
 
   while(infoMenu.menu[infoMenu.cur] == menuST7920)
   {
-    if(SPISlave.rIndex != SPISlave.wIndex)
+    while(SPISlave.rIndex != SPISlave.wIndex)
     {
       ST7920_ParseRecv(SPISlave.data[SPISlave.rIndex]);
 
       SPISlave.rIndex = (SPISlave.rIndex + 1) % SPI_SLAVE_MAX;
     }
 
-    #ifdef LCD_ENCODER_SUPPORT
+    #if LCD_ENCODER_SUPPORT
       loopCheckMode();
     #endif
   }
   SPI_SlaveDeInit();
 }
+#endif

Copy to SD Card root directory to update/BIQU_TFT35_APP1_V2.0.22.bin

@@ -1,4 +1,5 @@
 #include "touch_process.h"
+#include "GPIO_Init.h"
 #include "includes.h"
 
 #define XL1 LCD_X[0]
@@ -140,7 +141,7 @@ u16 Key_value(u8 total_rect,const GUI_RECT* menuRect)
   {
     if((x>menuRect[i].x0)&&(x<menuRect[i].x1)&&(y>menuRect[i].y0)&&(y<menuRect[i].y1))
     {
-      #ifdef BUZZER_SUPPORT
+      #ifdef BUZZER_PIN
 			openBuzzer(3, 11);
       #endif
       return i;
@@ -385,7 +386,7 @@ u16 KNOB_GetRV(GUI_RECT *knob)
   return key_return;
 }
 
-#ifdef BUZZER_SUPPORT
+#ifdef BUZZER_PIN
 void TIM3_Config(u16 psc,u16 arr)
 {
 	NVIC_InitTypeDef NVIC_InitStructure;
@@ -396,36 +397,25 @@ void TIM3_Config(u16 psc,u16 arr)
 	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; 
 	NVIC_Init(&NVIC_InitStructure); 
 
-	RCC->APB1ENR|=1<<1;	           //TIM3时钟使能    
- 	TIM3->ARR=arr;  	             //设定自动重装值   
-	TIM3->PSC=psc;  	             //预分频器
-  TIM3->SR = (uint16_t)~(1<<0);  //清除更新中断
-	TIM3->DIER|=1<<0;              //允许更新中断	  
+	RCC->APB1ENR|=1<<1;	           //TIM3ʱ��ʹ��    
+ 	TIM3->ARR=arr;  	             //�趨�Զ���װֵ   
+	TIM3->PSC=psc;  	             //Ԥ��Ƶ��
+  TIM3->SR = (uint16_t)~(1<<0);  //��������ж�
+	TIM3->DIER|=1<<0;              //���������ж�	  
 	TIM3->CNT =0;
-	TIM3->CR1 &= ~(0x01);          //失能定时器3	
+	TIM3->CR1 &= ~(0x01);          //ʧ�ܶ�ʱ��3	
 }
 
 void Buzzer_Config(void)
-{
-  GPIO_InitTypeDef GPIO_InitStructure;
-  
-  RCC_APB2PeriphClockCmd(BUZZER_RCC, ENABLE);
-
-  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
-  GPIO_InitStructure.GPIO_Pin = BUZZER_PIN;
-  GPIO_InitStructure.GPIO_Speed =GPIO_Speed_50MHz;
-  GPIO_Init(BUZZER_PORT, &GPIO_InitStructure);
+{  
+  GPIO_InitSet(BUZZER_PIN, MGPIO_MODE_OUT_PP, 0);
 
-	TIM3_Config(719,100);  //1Khz
+	TIM3_Config(999, F_CPUM-1);  //1Khz
 }
 
 void Buzzer_DeConfig(void)
 {
-  GPIO_InitTypeDef GPIO_InitStructure;  
-
-  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
-  GPIO_InitStructure.GPIO_Pin = BUZZER_PIN;
-  GPIO_Init(BUZZER_PORT, &GPIO_InitStructure);
+  GPIO_InitSet(BUZZER_PIN, MGPIO_MODE_IPN, 0);
 }
 
 typedef struct{
@@ -446,38 +436,37 @@ void openBuzzer(u16 h_us, u16 l_us)
   else
     buzzer.num = 500;        
 
-  TIM3->CR1 |= 0x01;               //使能定时器3	
+  TIM3->CR1 |= 0x01;               //ʹ�ܶ�ʱ��3	
 }
 void closeBuzzer(void)   
 {
 	buzzer.num = 0;
 	TIM3->CR1 &= ~(0x01);
 }
 
-void TIM3_IRQHandler(void)   //TIM3中断
+void TIM3_IRQHandler(void)   //TIM3�ж�
 {
   static bool flag = false;
-  if ((TIM3->SR&0x01) != 0 ) //检查指定的TIM中断发生与否:TIM 中断源 
+  if ((TIM3->SR&0x01) != 0 ) //���ָ����TIM�жϷ������:TIM �ж�Դ 
   {
-    flag = !flag;
+    flag = !flag;    
     if( flag )
     {
-      GPIO_SetBits(BUZZER_PORT, BUZZER_PIN);
       TIM3->ARR = buzzer.h_us;
     }
     else
     {
-      GPIO_ResetBits(BUZZER_PORT, BUZZER_PIN);
       TIM3->ARR = buzzer.l_us;
     }
-
+    
+    GPIO_SetLevel(BUZZER_PIN, flag);
     buzzer.num--;
     if( buzzer.num == 0 )
     {
       TIM3->CR1 &= ~(0x01);
     }
 
-    TIM3->SR = (uint16_t)~(1<<0);  //清除TIMx的中断待处理位:TIM 中断源 
+    TIM3->SR = (uint16_t)~(1<<0);  //���TIMx���жϴ�����λ:TIM �ж�Դ 
   }
 }
 #endif

Copy to SD Card root directory to update/BIQU_TFT35_V1.0.21.bin

@@ -1,101 +1,9 @@
 #include "ui_draw.h"
 #include "includes.h"
 
-
-
-
 #ifdef STM32_HAS_FSMC
-//Config for SPI Channel
-#if W25Qxx_SPI == _SPI1
-  #define W25QXX_SPI_NUM          SPI1
-  #define W25QXX_SPI_DMA_RCC_AHB  RCC_AHBPeriph_DMA1
-  #define W25QXX_SPI_DMA          DMA1
-  #define W25QXX_SPI_DMA_CHANNEL  DMA1_Channel2
-  #define W25QXX_SPI_DMA_IFCR_BIT 5
-#elif W25Qxx_SPI == _SPI2
-  #define W25QXX_SPI_NUM          SPI2
-  #define W25QXX_SPI_DMA          DMA1
-  #define W25QXX_SPI_DMA_RCC_AHB  RCC_AHBPeriph_DMA1
-  #define W25QXX_SPI_DMA_CHANNEL  DMA1_Channel4
-  #define W25QXX_SPI_DMA_IFCR_BIT 13
-#elif W25Qxx_SPI == _SPI3
-  #define W25QXX_SPI_NUM          SPI3
-  #define W25QXX_SPI_DMA          DMA2
-  #define W25QXX_SPI_DMA_RCC_AHB  RCC_AHBPeriph_DMA2
-  #define W25QXX_SPI_DMA_CHANNEL  DMA2_Channel1
-  #define W25QXX_SPI_DMA_IFCR_BIT 1
-#endif
-
-//SPI --> FSMC DMA (LCD_RAM)
-//16bits, SPI_RX to LCD_RAM.
-void LCD_DMA_Config(void)
-{  
-  
-  RCC->AHBENR |= W25QXX_SPI_DMA_RCC_AHB;				//开启DMA时钟
-  Delay_ms(5);					//等待DMA时钟稳定
-  W25QXX_SPI_DMA_CHANNEL->CPAR = (u32)&W25QXX_SPI_NUM->DR;			//外设地址为:SPI->DR
-  W25QXX_SPI_DMA_CHANNEL->CMAR = (u32)&LCD->LCD_RAM;//目标地址为LCD_RAM
-  W25QXX_SPI_DMA_CHANNEL->CNDTR = 0;			//DMA1,传输数据量,暂时设置为0
-  W25QXX_SPI_DMA_CHANNEL->CCR = 0X00000000;	//复位
-  W25QXX_SPI_DMA_CHANNEL->CCR |= 0<<4;		//从外设读
-  W25QXX_SPI_DMA_CHANNEL->CCR |= 0<<5;		//普通模式
-  W25QXX_SPI_DMA_CHANNEL->CCR |= 0<<6;		//外设地址非增量模式
-  W25QXX_SPI_DMA_CHANNEL->CCR |= 0<<7;		//存储器非增量模式
-  W25QXX_SPI_DMA_CHANNEL->CCR |= LCD_DATA_16BIT<<8;		//外设数据宽度为16位
-  W25QXX_SPI_DMA_CHANNEL->CCR |= LCD_DATA_16BIT<<10;		//存储器数据宽度16位
-  W25QXX_SPI_DMA_CHANNEL->CCR |= 1<<12;		//中等优先级
-  W25QXX_SPI_DMA_CHANNEL->CCR |= 0<<14;		//非存储器到存储器模式
-} 
-
-#define LCD_DMA_MAX_TRANS	65535		//DMA 65535 bytes one frame
-// start DMA transfer from SPI->DR to FSMC 
-// the max bytes of one frame is LCD_DMA_MAX_TRANS 65535
-void lcd_frame_segment_display(u16 size, u32 addr)
-{     
-  W25QXX_SPI_DMA_CHANNEL->CNDTR = size;
-
-  W25Qxx_SPI_CS_Set(0);
-  W25Qxx_SPI_Read_Write_Byte(CMD_FAST_READ_DATA);
-  W25Qxx_SPI_Read_Write_Byte((u8)((addr)>>16));
-  W25Qxx_SPI_Read_Write_Byte((u8)((addr)>>8));   
-  W25Qxx_SPI_Read_Write_Byte((u8)addr);  
-  W25Qxx_SPI_Read_Write_Byte(0XFF);  //8 dummy clock  
-
-  //set SPI to 16bit DMA rx only mode    
-  W25QXX_SPI_NUM->CR1 &= ~(1<<6); 	
-  W25QXX_SPI_NUM->CR2 |= 1<<0;  //enable SPI rx DMA
-  W25QXX_SPI_NUM->CR1 |= LCD_DATA_16BIT<<11;  //16bit data frame
-  W25QXX_SPI_NUM->CR1 |= 1<<10;  //rx only
-
-  W25QXX_SPI_DMA_CHANNEL->CCR |= 1<<0;  //enable dma channel
-  W25QXX_SPI_NUM->CR1 |= 1<<6;  //enable SPI
 
-  while((W25QXX_SPI_DMA->ISR&(1<<W25QXX_SPI_DMA_IFCR_BIT)) == 0);  //wait for rx complete 
-  W25QXX_SPI_DMA_CHANNEL->CCR &= (u32)(~(1<<0));
-  W25QXX_SPI_DMA->IFCR |= (u32)(1<<W25QXX_SPI_DMA_IFCR_BIT);  //clear ISR for rx complete
-  W25Qxx_SPI_CS_Set(1);
-
-  //set spi from dma to normal mode
-//  RCC->APB1RSTR |= 1<<15;     //reset SPI
-//  RCC->APB1RSTR &= ~(1<<15);
-  SPI_Protocol_Init(W25Qxx_SPI, W25Qxx_SPEED);
-}
-
-void lcd_frame_display(u16 sx,u16 sy,u16 w,u16 h, u32 addr)
-{
-  u32 cur=0;
-  u32 segmentSize;
-  u32 totalSize = w*h*(2-LCD_DATA_16BIT);
-
-  LCD_SetWindow(sx,sy,sx+w-1,sy+h-1);
-  LCD_WR_REG(0x2C);
-
-  for(cur = 0; cur < totalSize; cur += LCD_DMA_MAX_TRANS)
-  {
-    segmentSize = cur+LCD_DMA_MAX_TRANS<=totalSize ? LCD_DMA_MAX_TRANS : totalSize-cur;
-    lcd_frame_segment_display(segmentSize, addr+cur*(LCD_DATA_16BIT + 1));
-  }
-}
+void lcd_frame_display(u16 sx,u16 sy,u16 w,u16 h, u32 addr);
 
 #else
 

Copy to SD Card root directory to update/BIQU_TFT35_V1.0.22.bin

@@ -57,7 +57,7 @@ bool bmpDecode(char *bmp,u32 addr)
   f_read(&bmpFile, magic, 2 ,&mybr);  
   if (memcmp(magic, "BM", 2))  
     return false;
-  //****************��ȡͷ��Ϣ****************//  
+  
   f_lseek(&bmpFile, 10);  
   f_read(&bmpFile, &offset, sizeof(int),&mybr);  
 
@@ -71,7 +71,7 @@ bool bmpDecode(char *bmp,u32 addr)
     return false;
   bpp >>=3; 
   bytePerLine=w*bpp;     
-  if(bytePerLine%4 !=0) //bmp�ļ�ÿ�е��ֽ��������� 4 ����������������ǣ�����Ҫ����
+  if(bytePerLine%4 !=0) //bmp
     bytePerLine=(bytePerLine/4+1)*4;  
 
   for(bnum=0;bnum<(w*h*2+4095)/4096;bnum++)