|
32 | 32 | "RegisterTargets": "<p>Registers the specified targets with the specified target group.</p> <p>If the target is an EC2 instance, it must be in the <code>running</code> state when you register it.</p> <p>By default, the load balancer routes requests to registered targets using the protocol and port for the target group. Alternatively, you can override the port for a target when you register it. You can register each EC2 instance or IP address with the same target group multiple times using different ports.</p> <p>With a Network Load Balancer, you cannot register instances by instance ID if they have the following instance types: C1, CC1, CC2, CG1, CG2, CR1, CS1, G1, G2, HI1, HS1, M1, M2, M3, and T1. You can register instances of these types by IP address.</p>", |
33 | 33 | "RemoveListenerCertificates": "<p>Removes the specified certificate from the certificate list for the specified HTTPS or TLS listener.</p>", |
34 | 34 | "RemoveTags": "<p>Removes the specified tags from the specified Elastic Load Balancing resources. You can remove the tags for one or more Application Load Balancers, Network Load Balancers, Gateway Load Balancers, target groups, listeners, or rules.</p>", |
35 | | - "SetIpAddressType": "<p>Sets the type of IP addresses used by the subnets of the specified Application Load Balancer or Network Load Balancer.</p>", |
| 35 | + "SetIpAddressType": "<p>Sets the type of IP addresses used by the subnets of the specified load balancer.</p>", |
36 | 36 | "SetRulePriorities": "<p>Sets the priorities of the specified rules.</p> <p>You can reorder the rules as long as there are no priority conflicts in the new order. Any existing rules that you do not specify retain their current priority.</p>", |
37 | 37 | "SetSecurityGroups": "<p>Associates the specified security groups with the specified Application Load Balancer. The specified security groups override the previously associated security groups.</p> <p>You can't specify a security group for a Network Load Balancer or Gateway Load Balancer.</p>", |
38 | 38 | "SetSubnets": "<p>Enables the Availability Zones for the specified public subnets for the specified Application Load Balancer or Network Load Balancer. The specified subnets replace the previously enabled subnets.</p> <p>When you specify subnets for a Network Load Balancer, you must include all subnets that were enabled previously, with their existing configurations, plus any additional subnets.</p>" |
|
1584 | 1584 | "TargetGroupAttributeKey": { |
1585 | 1585 | "base": null, |
1586 | 1586 | "refs": { |
1587 | | - "TargetGroupAttribute$Key": "<p>The name of the attribute.</p> <p>The following attribute is supported by all load balancers:</p> <ul> <li> <p> <code>deregistration_delay.timeout_seconds</code> - The amount of time, in seconds, for Elastic Load Balancing to wait before changing the state of a deregistering target from <code>draining</code> to <code>unused</code>. The range is 0-3600 seconds. The default value is 300 seconds. If the target is a Lambda function, this attribute is not supported.</p> </li> </ul> <p>The following attributes are supported by Application Load Balancers, Network Load Balancers, and Gateway Load Balancers:</p> <ul> <li> <p> <code>stickiness.enabled</code> - Indicates whether target stickiness is enabled. The value is <code>true</code> or <code>false</code>. The default is <code>false</code>.</p> </li> <li> <p> <code>stickiness.type</code> - Indicates the type of stickiness. The possible values are: </p> <ul> <li> <p> <code>lb_cookie</code> and <code>app_cookie</code> for Application Load Balancers</p> </li> <li> <p> <code>source_ip</code> for Network Load Balancers</p> </li> <li> <p> <code>source_ip_dest_ip</code> and <code>source_ip_dest_ip_proto</code> for Gateway Load Balancers</p> </li> </ul> </li> </ul> <p>The following attributes are supported only if the load balancer is an Application Load Balancer and the target is an instance or an IP address:</p> <ul> <li> <p> <code>load_balancing.algorithm.type</code> - The load balancing algorithm determines how the load balancer selects targets when routing requests. The value is <code>round_robin</code> or <code>least_outstanding_requests</code>. The default is <code>round_robin</code>.</p> </li> <li> <p> <code>slow_start.duration_seconds</code> - The time period, in seconds, during which a newly registered target receives an increasing share of the traffic to the target group. After this time period ends, the target receives its full share of traffic. The range is 30-900 seconds (15 minutes). The default is 0 seconds (disabled).</p> </li> <li> <p> <code>stickiness.app_cookie.cookie_name</code> - Indicates the name of the application-based cookie. Names that start with the following prefixes are not allowed: <code>AWSALB</code>, <code>AWSALBAPP</code>, and <code>AWSALBTG</code>; they're reserved for use by the load balancer.</p> </li> <li> <p> <code>stickiness.app_cookie.duration_seconds</code> - The time period, in seconds, during which requests from a client should be routed to the same target. After this time period expires, the application-based cookie is considered stale. The range is 1 second to 1 week (604800 seconds). The default value is 1 day (86400 seconds).</p> </li> <li> <p> <code>stickiness.lb_cookie.duration_seconds</code> - The time period, in seconds, during which requests from a client should be routed to the same target. After this time period expires, the load balancer-generated cookie is considered stale. The range is 1 second to 1 week (604800 seconds). The default value is 1 day (86400 seconds).</p> </li> </ul> <p>The following attribute is supported only if the load balancer is an Application Load Balancer and the target is a Lambda function:</p> <ul> <li> <p> <code>lambda.multi_value_headers.enabled</code> - Indicates whether the request and response headers that are exchanged between the load balancer and the Lambda function include arrays of values or strings. The value is <code>true</code> or <code>false</code>. The default is <code>false</code>. If the value is <code>false</code> and the request contains a duplicate header field name or query parameter key, the load balancer uses the last value sent by the client.</p> </li> </ul> <p>The following attributes are supported only by Network Load Balancers:</p> <ul> <li> <p> <code>deregistration_delay.connection_termination.enabled</code> - Indicates whether the load balancer terminates connections at the end of the deregistration timeout. The value is <code>true</code> or <code>false</code>. The default is <code>false</code>.</p> </li> <li> <p> <code>preserve_client_ip.enabled</code> - Indicates whether client IP preservation is enabled. The value is <code>true</code> or <code>false</code>. The default is disabled if the target group type is IP address and the target group protocol is TCP or TLS. Otherwise, the default is enabled. Client IP preservation cannot be disabled for UDP and TCP_UDP target groups.</p> </li> <li> <p> <code>proxy_protocol_v2.enabled</code> - Indicates whether Proxy Protocol version 2 is enabled. The value is <code>true</code> or <code>false</code>. The default is <code>false</code>.</p> </li> </ul>" |
| 1587 | + "TargetGroupAttribute$Key": "<p>The name of the attribute.</p> <p>The following attribute is supported by all load balancers:</p> <ul> <li> <p> <code>deregistration_delay.timeout_seconds</code> - The amount of time, in seconds, for Elastic Load Balancing to wait before changing the state of a deregistering target from <code>draining</code> to <code>unused</code>. The range is 0-3600 seconds. The default value is 300 seconds. If the target is a Lambda function, this attribute is not supported.</p> </li> </ul> <p>The following attributes are supported by Application Load Balancers, Network Load Balancers, and Gateway Load Balancers:</p> <ul> <li> <p> <code>stickiness.enabled</code> - Indicates whether target stickiness is enabled. The value is <code>true</code> or <code>false</code>. The default is <code>false</code>.</p> </li> <li> <p> <code>stickiness.type</code> - Indicates the type of stickiness. The possible values are: </p> <ul> <li> <p> <code>lb_cookie</code> and <code>app_cookie</code> for Application Load Balancers.</p> </li> <li> <p> <code>source_ip</code> for Network Load Balancers.</p> </li> <li> <p> <code>source_ip_dest_ip</code> and <code>source_ip_dest_ip_proto</code> for Gateway Load Balancers.</p> </li> </ul> </li> </ul> <p>The following attributes are supported only if the load balancer is an Application Load Balancer and the target is an instance or an IP address:</p> <ul> <li> <p> <code>load_balancing.algorithm.type</code> - The load balancing algorithm determines how the load balancer selects targets when routing requests. The value is <code>round_robin</code> or <code>least_outstanding_requests</code>. The default is <code>round_robin</code>.</p> </li> <li> <p> <code>slow_start.duration_seconds</code> - The time period, in seconds, during which a newly registered target receives an increasing share of the traffic to the target group. After this time period ends, the target receives its full share of traffic. The range is 30-900 seconds (15 minutes). The default is 0 seconds (disabled).</p> </li> <li> <p> <code>stickiness.app_cookie.cookie_name</code> - Indicates the name of the application-based cookie. Names that start with the following prefixes are not allowed: <code>AWSALB</code>, <code>AWSALBAPP</code>, and <code>AWSALBTG</code>; they're reserved for use by the load balancer.</p> </li> <li> <p> <code>stickiness.app_cookie.duration_seconds</code> - The time period, in seconds, during which requests from a client should be routed to the same target. After this time period expires, the application-based cookie is considered stale. The range is 1 second to 1 week (604800 seconds). The default value is 1 day (86400 seconds).</p> </li> <li> <p> <code>stickiness.lb_cookie.duration_seconds</code> - The time period, in seconds, during which requests from a client should be routed to the same target. After this time period expires, the load balancer-generated cookie is considered stale. The range is 1 second to 1 week (604800 seconds). The default value is 1 day (86400 seconds). </p> </li> </ul> <p>The following attribute is supported only if the load balancer is an Application Load Balancer and the target is a Lambda function:</p> <ul> <li> <p> <code>lambda.multi_value_headers.enabled</code> - Indicates whether the request and response headers that are exchanged between the load balancer and the Lambda function include arrays of values or strings. The value is <code>true</code> or <code>false</code>. The default is <code>false</code>. If the value is <code>false</code> and the request contains a duplicate header field name or query parameter key, the load balancer uses the last value sent by the client.</p> </li> </ul> <p>The following attributes are supported only by Network Load Balancers:</p> <ul> <li> <p> <code>deregistration_delay.connection_termination.enabled</code> - Indicates whether the load balancer terminates connections at the end of the deregistration timeout. The value is <code>true</code> or <code>false</code>. The default is <code>false</code>.</p> </li> <li> <p> <code>preserve_client_ip.enabled</code> - Indicates whether client IP preservation is enabled. The value is <code>true</code> or <code>false</code>. The default is disabled if the target group type is IP address and the target group protocol is TCP or TLS. Otherwise, the default is enabled. Client IP preservation cannot be disabled for UDP and TCP_UDP target groups.</p> </li> <li> <p> <code>proxy_protocol_v2.enabled</code> - Indicates whether Proxy Protocol version 2 is enabled. The value is <code>true</code> or <code>false</code>. The default is <code>false</code>. </p> </li> </ul> <p>The following attributes are supported only by Gateway Load Balancers:</p> <ul> <li> <p> <code>target_failover.on_deregistration</code> - Indicates how the Gateway Load Balancer handles existing flows when a target is deregistered. The possible values are <code>rebalance</code> and <code>no_rebalance</code>. The default is <code>no_rebalance</code>. The two attributes (<code>target_failover.on_deregistration</code> and <code>target_failover.on_unhealthy</code>) can't be set independently. The value you set for both attributes must be the same. </p> </li> <li> <p> <code>target_failover.on_unhealthy</code> - Indicates how the Gateway Load Balancer handles existing flows when a target is unhealthy. The possible values are <code>rebalance</code> and <code>no_rebalance</code>. The default is <code>no_rebalance</code>. The two attributes (<code>target_failover.on_deregistration</code> and <code>target_failover.on_unhealthy</code>) cannot be set independently. The value you set for both attributes must be the same. </p> </li> </ul>" |
1588 | 1588 | } |
1589 | 1589 | }, |
1590 | 1590 | "TargetGroupAttributeValue": { |
|
0 commit comments