Skip to content

This issue was moved to a discussion.

You can continue the conversation there. Go to discussion →

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

What firmware for SMLIGHT SLZB-06MG24 ? #30

Closed
apydo opened this issue Feb 6, 2025 · 8 comments
Closed

What firmware for SMLIGHT SLZB-06MG24 ? #30

apydo opened this issue Feb 6, 2025 · 8 comments

Comments

@apydo
Copy link

apydo commented Feb 6, 2025

Hello,

I'd like to upgrade my stock zigbee firmware on SLZB-06MG24 to 8.0.2.
Is there any compatible firmware version for this device ?

Edit: Product homepage : https://smlight.tech/product/slzb-06mg24/

@Nerivec
Copy link
Owner

Nerivec commented Feb 6, 2025

I don't have that particular device. Can you test them out? I'll make a new release once they're confirmed working.
https://github.com/Nerivec/silabs-firmware-builder/actions/runs/13184952765

Note: Router firmware will require support in ZHC. I'll add it, but it won't be available until next release (or using dev branch).
Koenkk/zigbee-herdsman-converters#8754

@apydo
Copy link
Author

apydo commented Feb 6, 2025

Meantime I found a working firmware from @darkxst. It was added recently.
darkxst#180
I tested this version with few devices and Z2M 2.1.0 and it seems to work well.
I hope this help.

Do you want me to test your version anyway ? I can only test coordinator version though.

@Nerivec
Copy link
Owner

Nerivec commented Feb 6, 2025

Yes, it should pretty much be the same for coordinator.
Router is a bit different from darkxst though.

@darkxst
Copy link

darkxst commented Feb 7, 2025

I'd like to upgrade my stock zigbee firmware on SLZB-06MG24 to 8.0.2.

I built the factory firmware, you wont change much by upgrading it now.

@Nerivec
Copy link
Owner

Nerivec commented Feb 8, 2025

@Nerivec Nerivec closed this as completed Feb 8, 2025
@apydo
Copy link
Author

apydo commented Feb 10, 2025

I tested smlight_slzb06Mg24_zigbee_ncp_8.0.2.0_115200_sw_flow.gbl and it seems to work. My test was on a small z2m 2.1.1 setup with only two power outlets. Can't see any error in z2m.

@apydo
Copy link
Author

apydo commented Feb 10, 2025

Please note that the above firmware works with software flow control (as stated in the filename).
But @darkxst's and genuine smlight firmwares work with hardware control enabled.

@Nerivec
Copy link
Owner

Nerivec commented Feb 10, 2025

Repository owner locked and limited conversation to collaborators Mar 10, 2025
@Nerivec Nerivec converted this issue into discussion #37 Mar 10, 2025

This issue was moved to a discussion.

You can continue the conversation there. Go to discussion →

Labels
None yet
Projects
None yet
Development

No branches or pull requests

3 participants