🎨 Check flags without ENABLED

Author: thinkyhead

Marlin/src/MarlinCore.cpp

@@ -135,7 +135,7 @@
   #include "module/servo.h"
 #endif
 
-#if ENABLED(HAS_MOTOR_CURRENT_DAC)
+#if HAS_MOTOR_CURRENT_DAC
   #include "feature/dac/stepper_dac.h"
 #endif
 
@@ -1355,7 +1355,7 @@ void setup() {
     SETUP_RUN(digipot_i2c.init());
   #endif
 
-  #if ENABLED(HAS_MOTOR_CURRENT_DAC)
+  #if HAS_MOTOR_CURRENT_DAC
     SETUP_RUN(stepper_dac.init());
   #endif
 

Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp

@@ -307,7 +307,7 @@ void unified_bed_leveling::G29() {
 
   const uint8_t p_val = parser.byteval('P');
   const bool may_move = p_val == 1 || p_val == 2 || p_val == 4 || parser.seen_test('J');
-  #if ENABLED(HAS_MULTI_HOTEND)
+  #if HAS_MULTI_HOTEND
     const uint8_t old_tool_index = active_extruder;
   #endif
 

Marlin/src/feature/dac/dac_mcp4728.cpp

@@ -32,7 +32,7 @@
 
 #include "../../inc/MarlinConfig.h"
 
-#if ENABLED(HAS_MOTOR_CURRENT_DAC)
+#if HAS_MOTOR_CURRENT_DAC
 
 #include "dac_mcp4728.h"
 

Marlin/src/feature/dac/stepper_dac.cpp

@@ -26,7 +26,7 @@
 
 #include "../../inc/MarlinConfig.h"
 
-#if ENABLED(HAS_MOTOR_CURRENT_DAC)
+#if HAS_MOTOR_CURRENT_DAC
 
 #include "stepper_dac.h"
 #include "../../MarlinCore.h" // for SP_X_LBL...

Marlin/src/feature/joystick.h

@@ -32,13 +32,13 @@
 class Joystick {
   friend class Temperature;
   private:
-    #if ENABLED(HAS_JOY_ADC_X)
+    #if HAS_JOY_ADC_X
       static temp_info_t x;
     #endif
-    #if ENABLED(HAS_JOY_ADC_Y)
+    #if HAS_JOY_ADC_Y
       static temp_info_t y;
     #endif
-    #if ENABLED(HAS_JOY_ADC_Z)
+    #if HAS_JOY_ADC_Z
       static temp_info_t z;
     #endif
   public:

Marlin/src/feature/powerloss.h

@@ -64,27 +64,27 @@ typedef struct {
     Repeat stored_repeat;
   #endif
 
-  #if ENABLED(HAS_HOME_OFFSET)
+  #if HAS_HOME_OFFSET
     xyz_pos_t home_offset;
   #endif
-  #if ENABLED(HAS_POSITION_SHIFT)
+  #if HAS_POSITION_SHIFT
     xyz_pos_t position_shift;
   #endif
-  #if ENABLED(HAS_MULTI_EXTRUDER)
+  #if HAS_MULTI_EXTRUDER
     uint8_t active_extruder;
   #endif
 
   #if DISABLED(NO_VOLUMETRICS)
     float filament_size[EXTRUDERS];
   #endif
 
-  #if ENABLED(HAS_HOTEND)
+  #if HAS_HOTEND
     celsius_t target_temperature[HOTENDS];
   #endif
-  #if ENABLED(HAS_HEATED_BED)
+  #if HAS_HEATED_BED
     celsius_t target_temperature_bed;
   #endif
-  #if ENABLED(HAS_FAN)
+  #if HAS_FAN
     uint8_t fan_speed[FAN_COUNT];
   #endif
 

Marlin/src/feature/tmc_util.h

@@ -363,7 +363,7 @@ void test_tmc_connection(LOGICAL_AXIS_DECL(const bool, true));
 
     struct motion_state_t {
       xy_ulong_t acceleration;
-      #if ENABLED(HAS_CLASSIC_JERK)
+      #if HAS_CLASSIC_JERK
         xy_float_t jerk_state;
       #endif
     };

Marlin/src/gcode/calibrate/G33.cpp

@@ -63,7 +63,7 @@ enum CalEnum : char {                        // the 7 main calibration points -
 #define LOOP_CAL_RAD(VAR) LOOP_CAL_PT(VAR, __A, _7P_STEP)
 #define LOOP_CAL_ACT(VAR, _4P, _OP) LOOP_CAL_PT(VAR, _OP ? _AB : __A, _4P ? _4P_STEP : _7P_STEP)
 
-#if ENABLED(HAS_MULTI_HOTEND)
+#if HAS_MULTI_HOTEND
   const uint8_t old_tool_index = active_extruder;
 #endif
 

Marlin/src/gcode/calibrate/G34.cpp

@@ -81,11 +81,11 @@ void GcodeSuite::G34() {
     const uint16_t target_current = parser.intval('S', GANTRY_CALIBRATION_CURRENT);
     const uint32_t previous_current = stepper.motor_current_setting[Z_AXIS];
     stepper.set_digipot_current(1, target_current);
-  #elif ENABLED(HAS_MOTOR_CURRENT_DAC)
+  #elif HAS_MOTOR_CURRENT_DAC
     const float target_current = parser.floatval('S', GANTRY_CALIBRATION_CURRENT);
     const float previous_current = dac_amps(Z_AXIS, target_current);
     stepper_dac.set_current_value(Z_AXIS, target_current);
-  #elif ENABLED(HAS_MOTOR_CURRENT_I2C)
+  #elif HAS_MOTOR_CURRENT_I2C
     const uint16_t target_current = parser.intval('S', GANTRY_CALIBRATION_CURRENT);
     previous_current = dac_amps(Z_AXIS);
     digipot_i2c.set_current(Z_AXIS, target_current)
@@ -127,9 +127,9 @@ void GcodeSuite::G34() {
     stepper.set_digipot_current(Z_AXIS, previous_current);
   #elif HAS_MOTOR_CURRENT_PWM
     stepper.set_digipot_current(1, previous_current);
-  #elif ENABLED(HAS_MOTOR_CURRENT_DAC)
+  #elif HAS_MOTOR_CURRENT_DAC
     stepper_dac.set_current_value(Z_AXIS, previous_current);
-  #elif ENABLED(HAS_MOTOR_CURRENT_I2C)
+  #elif HAS_MOTOR_CURRENT_I2C
     digipot_i2c.set_current(Z_AXIS, previous_current)
   #elif HAS_TRINAMIC_CONFIG
     #if AXIS_IS_TMC(Z)

Marlin/src/gcode/feature/digipot/M907-M910.cpp

@@ -34,7 +34,7 @@
   #include "../../../feature/digipot/digipot.h"
 #endif
 
-#if ENABLED(HAS_MOTOR_CURRENT_DAC)
+#if HAS_MOTOR_CURRENT_DAC
   #include "../../../feature/dac/stepper_dac.h"
 #endif
 
@@ -73,7 +73,7 @@ void GcodeSuite::M907() {
     #endif
   #endif
 
-  #if ENABLED(HAS_MOTOR_CURRENT_DAC)
+  #if HAS_MOTOR_CURRENT_DAC
     if (parser.seenval('S')) {
       const float dac_percent = parser.value_float();
       LOOP_LE_N(i, 4) stepper_dac.set_current_percent(i, dac_percent);
@@ -92,7 +92,7 @@ void GcodeSuite::M907() {
     TERN_(HAS_MOTOR_CURRENT_DAC, stepper_dac.set_current_value(parser.byteval('P', -1), parser.ushortval('S', 0)));
   }
 
-  #if ENABLED(HAS_MOTOR_CURRENT_DAC)
+  #if HAS_MOTOR_CURRENT_DAC
 
     void GcodeSuite::M909() { stepper_dac.print_values(); }
     void GcodeSuite::M910() { stepper_dac.commit_eeprom(); }