Issues with adding Xiaomi Devices

[Imperial-Guard]

Somehow I can't add not new Xiaomi devices anymore.

Without any reason I can't pair new devices anymore.
I'm trying to add another smoke detector and a door sensor.

See below the version and paired components.

zigbee2mqtt:info 2018-10-27 10:17:16 Logging to directory: '/share/zigbee2mqtt/log/2018-10-27.10-17-16' zigbee2mqtt:info 2018-10-27 10:17:17 Starting zigbee2mqtt version 0.1.8 (commit #unknown) zigbee2mqtt:info 2018-10-27 10:17:17 Starting zigbee-shepherd zigbee2mqtt:info 2018-10-27 10:17:18 zigbee-shepherd started zigbee2mqtt:info 2018-10-27 10:17:18 Coordinator firmware version: '20180507' zigbee2mqtt:info 2018-10-27 10:17:18 Currently 11 devices are joined: zigbee2mqtt:info 2018-10-27 10:17:18 bedroom/switch/0001/thermostat (0x70b3d5de00000ece): unkown - undefined unknown (EndDevice) zigbee2mqtt:info 2018-10-27 10:17:18 hallway/sensor/0003/motionsensor (0x00158d0002b4863d): RTCGQ11LM - Xiaomi Aqara human body movement and illuminance sensor (EndDevice) zigbee2mqtt:info 2018-10-27 10:17:18 living_room/sensor/0003/gardendoorsensor (0x00158d000232c194): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice) zigbee2mqtt:info 2018-10-27 10:17:18 living_room/sensor/0004/doorsensor (0x00158d00022d2d2c): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice) zigbee2mqtt:info 2018-10-27 10:17:18 scullery/sensor/0001/gardendoorsensor (0x00158d000243753d): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice) zigbee2mqtt:info 2018-10-27 10:17:18 kitchen/sensor/0001/motionsensor (0x00158d0002b45f88): RTCGQ11LM - Xiaomi Aqara human body movement and illuminance sensor (EndDevice) zigbee2mqtt:info 2018-10-27 10:17:18 scullery (0x0017880100de5366): 433714 - Philips Hue Lux A19 bulb E27 (Router) zigbee2mqtt:info 2018-10-27 10:17:18 spare/sensor/0001/motionsensor (0x00158d0002732adb): RTCGQ11LM - Xiaomi Aqara human body movement and illuminance sensor (EndDevice) zigbee2mqtt:info 2018-10-27 10:17:18 hallway_up/sensor/0001/motionsensor (0x00158d0002753dde): RTCGQ11LM - Xiaomi Aqara human body movement and illuminance sensor (EndDevice) zigbee2mqtt:info 2018-10-27 10:17:18 hallway/sensor/0004/doorsensor (0x00158d000251b6f2): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice) zigbee2mqtt:info 2018-10-27 10:17:18 hallway_up/sensor/0002/smokedetector (0x00158d00028ac409): JTYJ-GD-01LM/BW - Xiaomi MiJia Honeywell smoke detector (EndDevice)

[HKC001]

Try using the coordinator firmware version 20180815.

Or if you're really adventurous, there's an even newer test firmware here: #533

[Imperial-Guard]

Thanks for your reply. Tomorrow I got the possibility to flash the coordinator to a newer version.

After updating the firmware do I need to pair all the devices again?

[Chrischi-]

Hi,

for people who don't have a debugger, i compiled a .bin that works with TI's SerialBootTool.

My changes beside of those of @Koenkk
23/12 (Devices/Neighbours) instead of 20/16 that koenkk used.

The CC2531 should have at least one time the "CC2531ZNP Prod" Firmware installed to have a suitable bootloader.

CC2531ZNP-Prod_D23_N12.zip

[Imperial-Guard]

Hi,

for people who don't have a debugger, i compiled a .bin that works with TI's SerialBootTool.

My changes beside of those of @Koenkk
23/12 (Devices/Neighbours) instead of 20/16 that koenkk used.

The CC2531 should have at least one time the "CC2531ZNP Prod" Firmware installed to have a suitable bootloader.

CC2531ZNP-Prod_D23_N12.zip

User your version and seems te be ok! I can add additional devices.

Thanks for your reply.

[Imperial-Guard]

Hi,

for people who don't have a debugger, i compiled a .bin that works with TI's SerialBootTool.

My changes beside of those of @Koenkk
23/12 (Devices/Neighbours) instead of 20/16 that koenkk used.

The CC2531 should have at least one time the "CC2531ZNP Prod" Firmware installed to have a suitable bootloader.

CC2531ZNP-Prod_D23_N12.zip

How to create from a .hex file a .bin for the TI's SerialBootTool ?

[h4nc]

Would be nice to have the Serial Boot Tool flashing method in the docs „alternative flashing methods“.

Maybe someone who already done this could wright a short tutorial and do a pull request.