Tuya TS0601_dimmer_2 switches that dont exist. #24471
Replies: 5 comments 6 replies
-
See this on how to enable debug logging. |
Beta Was this translation helpful? Give feedback.
-
Yes its the current 1.40.2 Toggled first with physical switches, then from the Z2M dashboard. |
Beta Was this translation helpful? Give feedback.
-
Pushed a fix! Changes will be available in the dev branch in a few hours from now. |
Beta Was this translation helpful? Give feedback.
-
OK i have tried the fix, the correct states now get updated and i can turn the light on and off and dim them with the physical button and the states get updated in z2m , but changing anything with z2m or hassio doesn't result in the switch doing anything, however the states do change. Its like the switch is ignoring the commands. Any ideas? the switch did work for a few days properly when i first set it up. I have tried deleting config, reinstalling z2m and repairing but same issue. |
Beta Was this translation helpful? Give feedback.
-
OK i enabled debugging and got this...
Looks like the message fails to deliver, any ideas why? |
Beta Was this translation helpful? Give feedback.
-
Having issues with this https://www.zigbee2mqtt.io/devices/TS0601_dimmer_2.html
When i toggle a switch on or off from either z2m or hass nothing happens, its because the wrong state is being changed.
In the states it shows extra states with _l1 or _l2 added to the end, these are being toggled which is wrong because if i manually turn the switch on the state without the extra _l1 or _l2 is toggled.
Incorrect states highlighted.
Beta Was this translation helpful? Give feedback.
All reactions