[action] [PR:22275] [Mellanox] Enable packet trimming for service ports in SPC4 relevant SKUs (sonic-net#1005)

<!--
 Please make sure you've read and understood our contributing guidelines:
 https://github.com/Azure/SONiC/blob/gh-pages/CONTRIBUTING.md

 failure_prs.log Make sure all your commits include a signature generated with `git commit -s` **

 If this is a bug fix, make sure your description includes "fixes #xxxx", or
 "closes #xxxx" or "resolves #xxxx"

 Please provide the following information:
-->

#### Why I did it
To enable packet trimming on SN5600 and SN5610N relevant SKUs

#### How I did it
Add SAI_ADAPTIVE_ROUTING_CIRCULATION_PORT=257 to SKU's sai.profile
#### How to verify it
Load image on Mellanox switch and make sure the KV is part of the sai.profile inside syncd container.
<!--
If PR needs to be backported, then the PR must be tested against the base branch and the earliest backport release branch and provide tested image version on these two branches. For example, if the PR is requested for master, 202211 and 202012, then the requester needs to provide test results on master and 202012.
-->

#### Which release branch to backport (provide reason below if selected)

<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->

- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
- [ ] 202205
- [ ] 202211
- [ ] 202305

#### Tested branch (Please provide the tested image version)

<!--
- Please provide tested image version
- e.g.
- [x] 20201231.100
-->

- [ ] <!-- image version 1 -->
- [ ] <!-- image version 2 -->

#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->

<!--
 Ensure to add label/tag for the feature raised. example - PR#2174 under sonic-utilities repo. where, Generic Config and Update feature has been labelled as GCU.
-->

#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/sonic-buildimage/blob/master/src/sonic-yang-models/doc/Configuration.md
-->

#### A picture of a cute animal (not mandatory but encouraged)

Author: mssonicbld

device/mellanox/x86_64-nvidia_sn5600-r0/Mellanox-SN5600-C224O8/sai.profile

@@ -2,3 +2,4 @@ SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/sai_5600_256x100g.xml
 SAI_INDEPENDENT_MODULE_MODE=1
 SAI_DEFAULT_SWITCHING_MODE_STORE_FORWARD=1
 SAI_NOT_DROP_SIP_DIP_LINK_LOCAL=1
+SAI_ADAPTIVE_ROUTING_CIRCULATION_PORT=257

device/mellanox/x86_64-nvidia_sn5600-r0/Mellanox-SN5600-C256S1/sai.profile

@@ -2,3 +2,4 @@ SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/sai_5600_256x100g.xml
 SAI_INDEPENDENT_MODULE_MODE=1
 SAI_DEFAULT_SWITCHING_MODE_STORE_FORWARD=1
 SAI_NOT_DROP_SIP_DIP_LINK_LOCAL=1
+SAI_ADAPTIVE_ROUTING_CIRCULATION_PORT=257

device/mellanox/x86_64-nvidia_sn5610n-r0/Mellanox-SN5610N-C224O8/sai.profile

@@ -2,3 +2,4 @@ SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/sai_5610n_224x100g_8x400g.xml
 SAI_DEFAULT_SWITCHING_MODE_STORE_FORWARD=1
 SAI_INDEPENDENT_MODULE_MODE=1
 SAI_NOT_DROP_SIP_DIP_LINK_LOCAL=1
+SAI_ADAPTIVE_ROUTING_CIRCULATION_PORT=257

device/mellanox/x86_64-nvidia_sn5610n-r0/Mellanox-SN5610N-C256S2/sai.profile

@@ -2,3 +2,4 @@ SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/sai_5610n_256x100g.xml
 SAI_DEFAULT_SWITCHING_MODE_STORE_FORWARD=1
 SAI_INDEPENDENT_MODULE_MODE=1
 SAI_NOT_DROP_SIP_DIP_LINK_LOCAL=1
+SAI_ADAPTIVE_ROUTING_CIRCULATION_PORT=257