[Upgrade] Go-Ethereum release v1.10.3 (#1469)

* eth: implement eth66 (#22241)

* eth/protocols/eth: split up the eth protocol handlers

* eth/protocols/eth: define eth-66 protocol messages

* eth/protocols/eth: poc implement getblockheaders on eth/66

* eth/protocols/eth: implement remaining eth-66 handlers

* eth/protocols: define handler map for eth 66

* eth/downloader: use protocol constants from eth package

* eth/protocols/eth: add ETH66 capability

* eth/downloader: tests for eth66

* eth/downloader: fix error in tests

* eth/protocols/eth: use eth66 for outgoing requests

* eth/protocols/eth: remove unused error type

* eth/protocols/eth: define protocol length

* eth/protocols/eth: fix pooled tx over eth66

* protocols/eth/handlers: revert behavioural change which caused tests to fail

* eth/downloader: fix failing test

* eth/protocols/eth: add testcases + fix flaw with header requests

* eth/protocols: change comments

* eth/protocols/eth: review fixes + fixed flaw in RequestOneHeader

* eth/protocols: documentation

* eth/protocols/eth: review concerns about types

* p2p/dnsdisc: fix hot-spin when all trees are empty (#22313)

In the random sync algorithm used by the DNS node iterator, we first pick a random
tree and then perform one sync action on that tree. This happens in a loop until any
node is found. If no trees contain any nodes, the iterator will enter a hot loop spinning
at 100% CPU.

The fix is complicated. The iterator now checks if a meaningful sync action can
be performed on any tree. If there is nothing to do, it waits for the next root record
recheck time to arrive and then tries again.

Fixes #22306

* les: renamed lespay to vflux (#22347)

* cmd/utils: disable caching preimages by default

* travis, appveyor, build: bump Go to 1.16

* les: fix balance expiration (#22343)

* les/lespay/server: fix balance expiration and add test

* les: move client balances to a new db

* les: rename lespayDb to lesDb

* tests/fuzzers/les: add fuzzer for les server handler (#22282)

* les: refactored server handler

* tests/fuzzers/les: add fuzzer for les server handler

* tests, les: update les fuzzer

tests: update les fuzzer

tests/fuzzer/les: release resources

tests/fuzzer/les: pre-initialize all resources

* les: refactored server handler and fuzzer

Co-authored-by: rjl493456442 <[email protected]>

* les: clean up server handler (#22357)

* cmd/geth: add db commands stats, compact, put, get, delete (#22014)

This PR introduces:

- db.put to put a value into the database
- db.get to read a value from the database
- db.delete to delete a value from the database
- db.stats to check compaction info from the database
- db.compact to trigger a db compaction

It also moves inspectdb to db.inspect.

* internal/ethapi: reject non-replay-protected txs over RPC (#22339)

This PR prevents users from submitting transactions without EIP-155 enabled. This behaviour can be overridden by specifying the flag --rpc.allow-unprotected-txs=true.

* accounts/abi/bind: fix up Go mod files for Go 1.16

* Dockerfile: bump to Go 1.16 base images

* travis: bump Android NDK version

* travis: bump builders to Bionic

* travis: manually install Android since Travis is stale (#22373)

* cmd/utils: remove deprecated command line flags (#22263)

This removes support for all deprecated flags except --rpc*.

* eth/protocols/snap: lower abortion and resumption logs to debug

* cmd, eth, les: enable serving light clients when non-synced (#22250)

This PR adds a more CLI flag, so that the les-server can serve light clients even the local node is not synced yet.

This functionality is needed in some testing environments(e.g. hive). After launching the les server, no more blocks will be imported so the node is always marked as "non-synced".

* les, light: improve txstatus retrieval (#22349)

Transaction unindexing will be enabled by default as of 1.10, which causes tx status retrieval will be broken without this PR. 

This PR introduces a retry mechanism in TxStatus retrieval.

* all: add support for EIP-2718, EIP-2930 transactions (#21502)

This adds support for EIP-2718 typed transactions as well as EIP-2930
access list transactions (tx type 1). These EIPs are scheduled for the
Berlin fork.

There very few changes to existing APIs in core/types, and several new APIs
to deal with access list transactions. In particular, there are two new
constructor functions for transactions: types.NewTx and types.SignNewTx.
Since the canonical encoding of typed transactions is not RLP-compatible,
Transaction now has new methods for encoding and decoding: MarshalBinary
and UnmarshalBinary.

The existing EIP-155 signer does not support the new transaction types.
All code dealing with transaction signatures should be updated to use the
newer EIP-2930 signer. To make this easier for future updates, we have
added new constructor functions for types.Signer: types.LatestSigner and
types.LatestSignerForChainID. 

This change also adds support for the YoloV3 testnet.

Co-authored-by: Martin Holst Swende <[email protected]>
Co-authored-by: Felix Lange <[email protected]>
Co-authored-by: Ryan Schneider <[email protected]>

* cmd/devp2p: add eth66 test suite (#22363)

Co-authored-by: Martin Holst Swende <[email protected]>

* les: move server pool to les/vflux/client (#22377)

* les: move serverPool to les/vflux/client

* les: add metrics

* les: moved ValueTracker inside ServerPool

* les: protect against node registration before server pool is started

* les/vflux/client: fixed tests

* les: make peer registration safe

* all: define Berlin hard fork spec

* rpc: add separate size limit for websocket (#22385)

This makes the WebSocket message size limit independent of the
limit used for HTTP requests. The new limit for WebSocket messages 
is 15MB.

* accounts/keystore: use github.com/google/uuid (#22217)

This replaces the github.com/pborman/uuid dependency with
github.com/google/uuid because the former is only a wrapper for
the latter (since v1.0.0).

Co-authored-by: Felix Lange <[email protected]>

* core/state: fix eta calculation on pruning (#22386)

* les: UDP pre-negotiation of available server capacity (#22183)

This PR implements the first one of the "lespay" UDP queries which
is already useful in itself: the capacity query. The server pool is making
use of this query by doing a cheap UDP query to determine whether it is
worth starting the more expensive TCP connection process.

* core/rawdb: fix the transaction indexer (#22395)

* core, eth: unship EIP 2315

* core/vm/runtime: more unshipping

* cmd/geth: put allowUnsecureTx flag in RPC section (#22412)

* params: update chts (#22418)

* cmd/utils: fix txlookuplimit for archive node (#22419)

* cmd/utils: fix exclusive check for archive node

* cmd/utils: set the txlookuplimit to 0

* core/forkid, params: unset Berlin fork number (#22413)

* les: fix nodiscover option on the client side (#22422)

* cmd: retire whisper flags (#22421)

* cmd: retire whisper flags

* cmd/geth: remove whisper configs

* tests: update to latest tests (#22290)

This updates the consensus tests to commit 31d6630 and
adds support for access list transactions in the test runner.

Co-authored-by: Martin Holst Swende <[email protected]>

* params: release geth 1.10.0 stable

* params: begin v1.10.1 release cycle

* Revert "core/forkid, params: unset Berlin fork number (#22413)"

This reverts commit ba99910.

* build: fix PPA failure due to updated debsrc

* build: add support for Ubuntu Hirsute Hippo

* tests: update reference tests with 2315 removed from Berlin

* params: release Geth v1.10.1

* params: begin v1.10.2 release cycle

* core/types: reduce allocations in GasPriceCmp (#22456)

* les: fix errors in metric namespace (#22459)

* les: add trailing slash to metric namespace

* les: omit '.' in metric namespace

* cmd: extend dumpgenesis to support network flags on the cmd (#22406)

* p2p/enr: fix decoding of incomplete lists (#22484)

Given a list of less than two elements DecodeRLP returned rlp.EOL,
leading to issues in outer decoders.

* cmd/geth: add ancient datadir flag to snapshot subcommands (#22486)

* cmd/devp2p: better testcase failure output for ethtests (#22482)

* eth, les: properly init statedb accesslist during tracing (#22480)

* eth/state, les/state: properly init statedb accesslist when tracing, fixes #22475

* eth: review comments

* eth/tracers: fix compilation err

* eth/tracers: apply @karalabe's suggested fix

* cmd/geth, eth/downloader: remove copydb command (#22501)

* cmd/geth: remove copydb command

* eth/downloader: remove fakepeer

* tests/fuzzers: fix goroutine leak in les fuzzer (#22455)

The oss-fuzz fuzzer has been reporting some failing testcases for les. They're all spurious, and cannot reliably be reproduced. However, running them showed that there was a goroutine leak: the tests created a lot of new clients, which started an exec queue that was never torn down.

This PR fixes the goroutine leak, and also a log message which was erroneously formatted.

* core/types: improve comments in new EIP-2718 code (#22402)

Responding to these comments:

    https://github.com/ethereum/go-ethereum/pull/21502/files#r579010962
    https://github.com/ethereum/go-ethereum/pull/21502/files#r579021565
    https://github.com/ethereum/go-ethereum/pull/21502/files#r579023510
    https://github.com/ethereum/go-ethereum/pull/21502/files#r578983734

* cmd/clef: docs - link to ethereum org repo (#22400)

* cmd/clef (docs): fix image background (#22399)

Flatten the image so we do not have dark text on dark background

* core/rawdb: fix transaction indexing/unindexing hashing error (#22457)

* core/rawdb: more verbose error logs + better hashing

* core/rawdb: add failing testcase

* core/rawdb: properly hash transactions while indexing/unindexing

* core/rawdb: exit on error + better log msg

* les: fix UDP connection query (#22451)

This PR fixes multiple issues with the UDP connection pre-negotiation feature:

- the enable condition was wrong (it checked the existence of the DiscV5 struct where it wasn't initialized yet, disabling the feature even if discv5 was enabled)
- the server pool queried already connected nodes when the discovery iterators returned them again
- servers responded positively before they were synced and really willing to accept connections

Metrics are also added on the server side that count the positive and negative replies to served connection queries.

* les: fix UDP connection query (#22451)

This PR fixes multiple issues with the UDP connection pre-negotiation feature:
- the enable condition was wrong (it checked the existence of the DiscV5 struct where it wasn't initialized yet, disabling the feature even if discv5 was enabled)
- the server pool queried already connected nodes when the discovery iterators returned them again
- servers responded positively before they were synced and really willing to accept connections

Metrics are also added on the server side that count the positive and negative replies to served connection queries.

* les: allow either full enode strings or raw hex ids in the API (#22423)

* eth/protocols/snap, eth/downloader: don't use bloom filter in snap sync

* eth/protocols/snap: fix typo (#22530)

* cmd/devp2p/internal/ethtest: return request ID in BlockHeaders response (#22508)

This PR fixes an issue with the eth66 test suite where, during a readAndServe when
the test is manually responding to GetBlockHeader requests, it now responds
with a BlockHeaders eth66 packet that includes the inbound request ID.

* ethclient: fix error handling for header test (#22514)

The wantErr field was disused, and the error returned by HeaderByNumber
was not properly tested.

This simplifies the error checking using errors.Is and asserts that getting
an expected missing header returns ethereum.NotFound. Also adds a nil
check condition for header.Number before using big.Int's Sign method.

* accounts/abi/bind: add NoSend transact option (#22446)

This adds a new option to avoid sending the transaction which is
created by calling a bound contract method.

* go.mod: upgrade goleveldb to commit 64b5b1c (#22436)

This pulls in a fix for a corruption issue when the process crashes
while a new manifest file is being added.

* go.mod: upgrade goupnp to commit 0ca76305 (#22479)

This pulls in a fix to skip the broadcast on interfaces which are down.

* consensus/ethash: remove unnecessary variable definition (#22512)

* cmd/devp2p: use AWS-SDK v2 (#22360)

This updates the DNS deployer to use AWS SDK v2. Migration is relatively
seamless, although there were two locations that required a slightly
different approach to achieve the same results. In particular, waiting for
DNS change propagation is very different with SDK v2. 

This change also optimizes DNS updates by publishing all changes before
waiting for propagation.

* p2p/dnsdisc: fix flaw in dns size calculation (#22533)

This fixes the calculation of the tree branch factor. With the new
formula, we now creat at most 13 children instead of 30, ensuring
the TXT record size will be below 370 bytes.

* core: fix potential race in chainIndexerTest (#22346)

* cmd/devp2p/internal/ethtest: skip eth/66 tests when v66 not supported (#22460)

* cmd/devp2p: add flag for AWS region (#22537)

* cmd/devp2p: fix error in updating the cursor when collecting records for route53 (#22538)

This PR fixes a regression introduced in #22360, when we updated to the v2 of the AWS sdk, which causes current crawler to just get the same first 100 results over and over, and get stuck in a loop.

* cmd/devp2p: add old block announcement test to eth test suite (#22474)

Add old block announcement test to eth test suite, checks to make sure old block announcement isn't propagated

* cmd/utils: fix compilation issue on openbsd (#22511)

* core: fix method comment for `txpool.requestReset` (#22543)

* accounts: eip-712 signing for ledger (#22378)

* accounts: eip-712 signing for ledger

* address review comments

* all: add read-only option to database (#22407)

* all: add read-only option to database

* all: fixes tests

* cmd/geth: migrate flags

* cmd/geth: fix the compact

* cmd/geth: fix the format

* cmd/geth: fix log

* cmd: add chain-readonly

* core: add readonly notion to freezer

* core/rawdb: add log

* core/rawdb: fix freezer close

* cmd: fix

* cmd, core: construct db

* core: update tests

* cmd/geth: check block range against chain head in export cmd (#22387)

Check the input parameters against the actual head block, exit on error

* core/state/snapshot: fix panic on missing parent

* internal/web3ext, node: migrate node admin API (Start|Stop)RPC->HTTP (#22461)

* internal/web3ext,node: migrate node admin API (Start|Stop)RPC->HTTP

Corresponding CLI flags --rpc have been moved to --http.

This moves the admin module HTTP RPC start/stop
methods to an equivalent namespace.

Rel ethereum/go-ethereum#22263

Date: 2021-03-08 08:00:11-06:00
Signed-off-by: meows <[email protected]>

* internal/web3ext: fix startRPC/HTTP param count (4->5)

Date: 2021-03-16 06:13:23-05:00
Signed-off-by: meows <[email protected]>

* cmd/devp2p: skip ENR field tails properly in nodeset filter (#22565)

In Geth v1.10, we changed the structure of the "les" ENR entry. As a result, the DHT crawler that creates the DNS lists
no longer recognizes the les nodes, which is fixed in this commit. 

* cmd/devp2p: skip ENR field tails properly in nodeset filter
* cmd/devp2p: fix tail decoder for snap as well
* les: fix tail decoding in "eth" ENR entry

* p2p: fix minor typo and remove fd parameter in checkInboundConn (#22547)

* p2p/dnsdisc: rate limit resolving before checking cache (#22566)

This makes the rate limit apply regardless of whether the node is
already cached.

* eth/protocols/snap: fix the flaws in the snap sync (#22553)

* eth/protocols/snap: fix snap sync

* eth/protocols/snap: fix tests

* eth: fix tiny

* eth: update tests

* eth: update tests

* core/state/snapshot: testcase for #22534

* eth/protocols/snap: fix boundary loss on full-but-proven range

* core/state/snapshot: lintfix

* eth: address comment

* eth: fix handler

Co-authored-by: Martin Holst Swende <[email protected]>
Co-authored-by: Péter Szilágyi <[email protected]>

* eth/tracers, core: use scopecontext in tracers, provide statedb in capturestart (#22333)

Fixes the CaptureStart api to include the EVM, thus being able to set the statedb early on. This pr also exposes the struct we used internally in the interpreter to encapsulate the contract, mem, stack, rstack, so we pass it as a single struct to the tracer, and removes the error returns on the capture methods.

* core: fix condition on header verification

* cmd/devp2p: fix comparison of TXT record value (#22572)

* cmd/devp2p: fix comparison of TXT record value

The AWS API returns quoted DNS strings, so we must encode the new value
before comparing it against the existing record content.

* cmd/devp2p: add test

* cmd/devp2p: fix typo and rename val -> newValue

* eth: dump rpc gas cap and tx fee cap (#22574)

* eth/protocols, metrics, p2p: add handler performance metrics

* eth/protocols, metrics: use resetting histograms for rare packets

* eth: fix corner case in sync head determination (#21695)

This avoids synchronisation failures when the local header is ahead of
the local full block.

* cmd/geth, consensus/ethash: add support for --miner.notify.full flag (#22558)

The PR implements the --miner.notify.full flag that enables full pending block
notifications. When this flag is used, the block notifications sent to mining
endpoints contain the complete block header JSON instead of a work package
array.

Co-authored-by: AlexSSD7 <[email protected]>
Co-authored-by: Martin Holst Swende <[email protected]>

* metrics/influxdb: don't push empty histograms, no measurement != 0

* eth/protocols/snap: add peer id and req id to the timeout logs

* cmd/devp2p: update to newer cloudflare API client (#22588)

This upgrades the cloudflare client dependency to v0.14.0. The new
version changes the API because all methods now require a context
parameter. This change also reduces the log level of the 'Skipping...'
message to debug, following a similar change in the AWS deployer.

* core/state/pruner: move the compaction out of the pruning procedure (#22579)

The main idea behind it is: the range compaction is very expensive
which can take a few hours to finish. During this long procedure,
a lot of exceptions can occur, e.g.
- Geth is killed manually
- Geth is killed because of machine crash
- etc

In order to minimize the effect of the exceptions, the compaction
is moved out of the pruning. So that even the compaction is not
finished, the pruning is regarded as done.

* eth/protocols/snap: try to prevent requests timing out

* core: add BlockGen.GetBalance method  (#22589)

* cmd/puppeth: specify working directory for nodejs 15 (#22549)

* cmd/geth: add db dumptrie command (#22563)

Adds the command "geth db dumptrie <root> <seek> <max>", to better help investigate the trie data

* core/vm: fix Byzantium address list (#22603)

* ethstats: avoid creating subscriptions on background goroutine (#22587)

This fixes an issue where the ethstats service could crash if geth was
started and then immediately stopped due to an internal error. The
cause of the crash was a nil subscription being returned by the backend,
because the background goroutine creating them was scheduled after
the backend had already shut down.

Moving the creation of subscriptions into the Start method, which runs
synchronously during startup of the node, means the returned subscriptions
can never be 'nil'.

Co-authored-by: Felix Lange <[email protected]>
Co-authored-by: Martin Holst Swende <[email protected]>

* core/state/snapshot, ethdb: track deletions more accurately (#22582)

* core/state/snapshot, ethdb: track deletions more accurately

* core/state/snapshot: don't reset the iterator, leveldb's screwy

* ethdb: don't mess with the insert batches for now

* rpc: tighter shutdown synchronization in client subscription (#22597)

This fixes a rare issue where the client subscription forwarding loop
would attempt send on the subscription's channel after Unsubscribe has
returned, leading to a panic if the subscription channel was already
closed by the user. Example:

    sub, _ := client.Subscribe(..., channel, ...)
    sub.Unsubscribe()
    close(channel)

The race occurred because Unsubscribe called quitWithServer to tell the
forwarding loop to stop sending on sub.channel, but did not wait for the
loop to actually come down. This is fixed by adding an additional channel
to track the shutdown, on which Unsubscribe now waits.

Fixes #22322

* all: fix miner hashRate -> hashrate on API calls

* core/state/snapshot: fix data race in diff layer (#22540)

* internal/ethapi: fix eth_chainId method (#22243)

This removes the duplicated definition of eth_chainID
in package eth and updates the definition in internal/ethapi
to treat chain ID as a bigint.

Co-authored-by: Felix Lange <[email protected]>

* graphql: add support for tx types and tx access lists (#22491)

This adds support for EIP-2718 access list transactions in the GraphQL API.

Co-authored-by: Amit Shah <[email protected]>
Co-authored-by: Felix Lange <[email protected]>

* internal/debug: add JSON log format and rename logging flags (#22341)

This change adds support for logging JSON records when the --log.json flag is
given. The --debug and --backtrace flags are deprecated and replaced by
--log.debug and --log.backtrace.

While changing this, it was noticed that the --memprofilerate and
--blockprofilerate were ineffective (they were always overridden even if
--pprof.memprofilerate was not set). This is also fixed.

Co-authored-by: Felix Lange <[email protected]>

* cmd/utils: move cache sanity check to SetEthConfig (#22510)

Move the cache sanity check to the SetEthConfig function
to allow the config file to load.

* consensus/ethash: replace a magic number with it's constant (#22618)

* les: move client pool to les/vflux/server (#22495)

* les: move client pool to les/vflux/server

* les/vflux/server: un-expose NodeBalance, remove unused fn, fix bugs

* tests/fuzzers/vflux: add ClientPool fuzzer

* les/vflux/server: fixed balance tests

* les: rebase fix

* les/vflux/server: fixed more bugs

* les/vflux/server: unexported NodeStateMachine fields and flags

* les/vflux/server: unexport all internal components and functions

* les/vflux/server: fixed priorityPool test

* les/vflux/server: polish balance

* les/vflux/server: fixed mutex locking error

* les/vflux/server: priorityPool bug fixed

* common/prque: make Prque wrap-around priority handling optional

* les/vflux/server: rename funcs, small optimizations

* les/vflux/server: fixed timeUntil

* les/vflux/server: separated balance.posValue and negValue

* les/vflux/server: polish setup

* les/vflux/server: enforce capacity curve monotonicity

* les/vflux/server: simplified requestCapacity

* les/vflux/server: requestCapacity with target range, no iterations in SetCapacity

* les/vflux/server: minor changes

* les/vflux/server: moved default factors to balanceTracker

* les/vflux/server: set inactiveFlag in priorityPool

* les/vflux/server: moved related metrics to vfs package

* les/vflux/client: make priorityPool temp state logic cleaner

* les/vflux/server: changed log.Crit to log.Error

* add vflux fuzzer to oss-fuzz

Co-authored-by: rjl493456442 <[email protected]>

* eth, les: fix tracers (#22473)

* eth, les: fix tracer

* eth: isolate live trie database in tracer

* eth: fix nil

* eth: fix

* eth, les: add checkLive param

* eth/tracer: fix

* core, eth, internal/ethapi: create access list RPC API (#22550)

* core/vm: implement AccessListTracer

* eth: implement debug.createAccessList

* core/vm: fixed nil panics in accessListTracer

* eth: better error messages for createAccessList

* eth: some fixes on CreateAccessList

* eth: allow for provided accesslists

* eth: pass accesslist by value

* eth: remove created acocunt from accesslist

* core/vm: simplify access list tracer

* core/vm: unexport accessListTracer

* eth: return best guess if al iteration times out

* eth: return best guess if al iteration times out

* core: docstring, unexport methods

* eth: typo

* internal/ethapi: move createAccessList to eth package

* internal/ethapi: remove reexec from createAccessList

* internal/ethapi: break if al is equal to last run, not if gas is equal

* internal/web3ext: fixed arguments

* core/types: fixed equality check for accesslist

* core/types: no hardcoded vals

* core, internal: simplify access list generation, make it precise

* core/vm: fix typo

Co-authored-by: Martin Holst Swende <[email protected]>
Co-authored-by: Péter Szilágyi <[email protected]>

* eth: fix tracing state retrieval if requesting the non-dirty genesis

* params: update CHTs for v1.10.2

* params: release go-ethereum v1.10.2 stable

* params: begin v1.10.3 release cycle

* eth, les: drop support for eth/64, fix eth/66 tests

* accounts: documentation fixes (#22645)

* replaces `an chance` with `a chance`
* replaces `SignHashWithPassphrase` with `SignTextWithPassphrase` as there was no SignHashWithPasspharse function in the file

* cmd/geth: add db-command to inspect freezer index (#22633)

This PR makes it easier to inspect the freezer index, which could be useful to investigate things like #22111

* cmd/faucet: support testnet flags in the faucet (#22545)


Co-authored-by: Felix Lange <[email protected]>
Co-authored-by: Martin Holst Swende <[email protected]>

* eth/fetcher: avoid spurious timer events at startup (#22652)


Co-authored-by: Felix Lange <[email protected]>

* core, eth: faster snapshot generation (#22504)

* eth/protocols: persist received state segments

* core: initial implementation

* core/state/snapshot: add tests

* core, eth: updates

* eth/protocols/snapshot: count flat state size

* core/state: add metrics

* core/state/snapshot: skip unnecessary deletion

* core/state/snapshot: rename

* core/state/snapshot: use the global batch

* core/state/snapshot: add logs and fix wiping

* core/state/snapshot: fix

* core/state/snapshot: save generation progress even if the batch is empty

* core/state/snapshot: fixes

* core/state/snapshot: fix initial account range length

* core/state/snapshot: fix initial account range

* eth/protocols/snap: store flat states during the healing

* eth/protocols/snap: print logs

* core/state/snapshot: refactor (#4)

* core/state/snapshot: refactor

* core/state/snapshot: tiny fix and polish

Co-authored-by: rjl493456442 <[email protected]>

* core, eth: fixes

* core, eth: fix healing writer

* core, trie, eth: fix paths

* eth/protocols/snap: fix encoding

* eth, core: add debug log

* core/state/generate: release iterator asap (#5)

core/state/snapshot: less copy

core/state/snapshot: revert split loop

core/state/snapshot: handle storage becoming empty, improve test robustness

core/state: test modified codehash

core/state/snapshot: polish

* core/state/snapshot: optimize stats counter

* core, eth: add metric

* core/state/snapshot: update comments

* core/state/snapshot: improve tests

* core/state/snapshot: replace secure trie with standard trie

* core/state/snapshot: wrap return as the struct

* core/state/snapshot: skip wiping correct states

* core/state/snapshot: updates

* core/state/snapshot: fixes

* core/state/snapshot: fix panic due to reference flaw in closure

* core/state/snapshot: fix errors in state generation logic + fix log output

* core/state/snapshot: remove an error case

* core/state/snapshot: fix condition-check for exhausted snap state

* core/state/snapshot: use stackTrie for small tries

* core/state/snapshot: don't resolve small storage tries in vain

* core/state/snapshot: properly clean up storage of deleted accounts

* core/state/snapshot: avoid RLP-encoding in some cases + minor nitpicks

* core/state/snapshot: fix error (+testcase)

* core/state/snapshot: clean up tests a bit

* core/state/snapshot: work in progress on better tests

* core/state/snapshot: polish code

* core/state/snapshot: fix trie iteration abortion trigger

* core/state/snapshot: fixes flaws

* core/state/snapshot: remove panic

* core/state/snapshot: fix abort

* core/state/snapshot: more tests (plus failing testcase)

* core/state/snapshot: more testcases + fix for failing test

* core/state/snapshot: testcase for malformed data

* core/state/snapshot: some test nitpicks

* core/state/snapshot: improvements to logging

* core/state/snapshot: testcase to demo error in abortion

* core/state/snapshot: fix abortion

* cmd/geth: make verify-state report the root

* trie: fix failing test

* core/state/snapshot: add timer metrics

* core/state/snapshot: fix metrics

* core/state/snapshot: udpate tests

* eth/protocols/snap: write snapshot account even if code or state is needed

* core/state/snapshot: fix diskmore check

* core/state/snapshot: review fixes

* core/state/snapshot: improve error message

* cmd/geth: rename 'error' to 'err' in logs

* core/state/snapshot: fix some review concerns

* core/state/snapshot, eth/protocols/snap: clear snapshot marker when starting/resuming snap sync

* core: add error log

* core/state/snapshot: use proper timers for metrics collection

* core/state/snapshot: address some review concerns

* eth/protocols/snap: improved log message

* eth/protocols/snap: fix heal logs to condense infos

* core/state/snapshot: wait for generator termination before restarting

* core/state/snapshot: revert timers to counters to track total time

Co-authored-by: Martin Holst Swende <[email protected]>
Co-authored-by: Péter Szilágyi <[email protected]>

* core/types: drop some relice data types

* all: make logs a bit easier on the eye to digest (#22665)

* all: add thousandths separators for big numbers on log messages

* p2p/sentry: drop accidental file

* common, log: add fast number formatter

* common, eth/protocols/snap: simplifty fancy num types

* log: handle nil big ints

* eth/protocols/snap: use ephemeral channels to avoid cross-sync delveries

* core: add TestGenesisHashes and fix YoloV3 (#22559)

This adds simple unit test checking if the hard-coded genesis
hash values in package params match the actual genesis block hashes.

* log: fix formatting of big.Int (#22679)

* log: fix formatting of big.Int

The implementation of formatLogfmtBigInt had two issues: it crashed when
the number was actually large enough to hit the big integer case, and
modified the big.Int while formatting it.

* log: don't call FormatLogfmtInt64 for int16

* log: separate from decimals back, not front

Co-authored-by: Péter Szilágyi <[email protected]>

* les/vflux/server: fix priority cornercase causing fuzzer timeout (#22650)

* les/vflux/server: fix estimatePriority corner case

* les/vflux/server: simplify inactiveAllowance == 0 case

* trie: make stacktrie not mutate input values (#22673)

The stacktrie is a bit un-untuitive, API-wise: since it mutates input values.
Such behaviour is dangerous, and easy to get wrong if the calling code 'forgets' this quirk. The behaviour is fixed by this PR, so that the input values are not modified by the stacktrie. 

Note: just as with the Trie, the stacktrie still references the live input objects, so it's still _not_ safe to mutate the values form the callsite.

* core/state/snapshot: avoid copybytes for stacktrie

* eth/catalyst: add catalyst API prototype (#22641)

This change adds the --catalyst flag, enabling an RPC API for eth2 integration.
In this initial version, catalyst mode also disables all peer-to-peer networking.

Co-authored-by: Mikhail Kalinin <[email protected]>
Co-authored-by: Felix Lange <[email protected]>

* cmd/devp2p: add support for -limit option in nodeset filter command (#22694)

The new -limit option makes the filter operate on top N nodes by score.
This also adds ENR attribute stats in the nodeset info command.
Node set commands are now documented in README.

* cmd/devp2p: add dns nuke-route53 command (#22695)

* core: nuke legacy snapshot supporting (#22663)

* ethash: no block reward in catalyst mode (#22697)

* trie: make stacktrie support binary marshal/unmarshal (#22685)

* go.mod: upgrade gopsutils to v3.21.4 (#22693)

This fixes the OpenBSD/arm64 build.

* tests: disable blockchain tests based on general state tests (#22704)

* eth, internal: extend the TraceCall API (#22245)

Adds an an optional parameter `overrides *map[common.Address]account` to the `eth_call` API in order for the caller to  can customize the state.

* eth/tracers, internal/ethapi: fix typos causing lint issue (#22711)

* les: fix goroutine leaks in tests (#22707)

* trie: improve the node iterator seek operation (#22470)

This change improves the efficiency of the nodeIterator seek
operation. Previously, seek essentially ran the iterator forward
until it found the matching node. With this change, it skips
over fullnode children and avoids resolving them from the database.

* accounts/external, signer/core: add support for EIP-2930 transactions (#22585)

This adds support for signing EIP-2930 with clef.

* rpc: add HTTPError type for HTTP error responses (#22677)

The new error type is returned by client operations contains details of
the response error code and response body.

Co-authored-by: Felix Lange <[email protected]>

* eth/protocols, prp/tracker: add support for req/rep rtt tracking (#22608)

* eth/protocols, prp/tracker: add support for req/rep rtt tracking

* p2p/tracker: sanity cap the number of pending requests

* pap/tracker: linter <3

* p2p/tracker: disable entire tracker if no metrics are enabled

* cmd/devp2p/internal/ethtest: run test suite as Go unit test (#22698)

This change adds a Go unit test that runs the protocol test suite
against the go-ethereum implementation of the eth protocol.

* core/state/snapshot, true: reuse dirty data instead of hitting disk when generating (#22667)

* core/state/snapshot: reuse memory data instead of hitting disk when generating

* trie: minor nitpicks wrt the resolver optimization

* core/state/snapshot, trie: use key/value store for resolver

* trie: fix linter

Co-authored-by: Péter Szilágyi <[email protected]>

* cmd/devp2p/internal/ethtest: add more tx propagation tests (#22630)

This adds a test for large tx announcement messages, as well as a test to
check that announced tx hashes are requested by the node.

* p2p/discover: improve discv5 handling of IPv4-in-IPv6 addresses (#22703)

When receiving PING from an IPv4 address over IPv6, the implementation sent
back a IPv4-in-IPv6 address. This change makes it reflect the IPv4 address.

* core: remove old conversion to shuffle leveldb blocks into ancients

* core/rawdb: fix datarace in freezer (#22728)

The Append / truncate operations were racy. When a datafile reaches 2Gb, a new file is needed. For this operation, we require a writelock, which is not needed in the 99.99% of all cases where the data does fit in the current head-file.

This transition from readlock to writelock was incorrect, and as the readlock was released, a truncate operation could slip in between, and truncate the data. This would have been fine, however, the Append operation continued writing as if no truncation had occurred, e.g writing item 5 where item 0 should reside.

This PR changes the behaviour, so that if when we run into the situation that a new file is needed, it aborts, and retries, this time with a writelock.

The outcome of the situation described above, running on this PR, would instead be that the Append operation exits with a failure.

* les: polish code (#22625)

* les: polish code

* les/vflus/server: fixes

* les: fix lint

* build: upgrade to golangci-lint v1.39.0 (#22696)

* build: upgrade to golangci-lint v1.39.0

* consensus/ethash: fix go vet warning regarding reflect.SliceHeader

* eth/catalyst: fix lint issue

* consensus/ethash: fix bug in memoryMapFile

* cmd/puppeth: add support for authentication via ssh agent (#22634)

* build: upgrade -dlgo version to Go 1.16.3 (#22746)

* core/vm: make gas cost reporting to tracers correct (#22702)

Previously, the makeCallVariantGasCallEIP2929 charged the cold account access cost directly, leading to an incorrect gas cost passed to the tracer from the main execution loop.
This change still temporarily charges the cost (to allow for an accurate calculation of the available gas for the call), but then afterwards refunds it and instead returns the correct total gas cost to be then properly charged in the main loop.

* eth/protocols/snap: generate storage trie from full dirty snap data (#22668)

* eth/protocols/snap: generate storage trie from full dirty snap data

* eth/protocols/snap: get rid of some more dead code

* eth/protocols/snap: less frequent logs, also log during trie generation

* eth/protocols/snap: implement dirty account range stack-hashing

* eth/protocols/snap: don't loop on account trie generation

* eth/protocols/snap: fix account format in trie

* core, eth, ethdb: glue snap packets together, but not chunks

* eth/protocols/snap: print completion log for snap phase

* eth/protocols/snap: extended tests

* eth/protocols/snap: make testcase pass

* eth/protocols/snap: fix account stacktrie commit without defer

* ethdb: fix key counts on reset

* eth/protocols: fix typos

* eth/protocols/snap: make better use of delivered data (#44)

* eth/protocols/snap: make better use of delivered data

* squashme

* eth/protocols/snap: reduce chunking

* squashme

* eth/protocols/snap: reduce chunking further

* eth/protocols/snap: break out hash range calculations

* eth/protocols/snap: use sort.Search instead of looping

* eth/protocols/snap: prevent crash on storage response with no keys

* eth/protocols/snap: nitpicks all around

* eth/protocols/snap: clear heal need on 1-chunk storage completion

* eth/protocols/snap: fix range chunker, add tests

Co-authored-by: Péter Szilágyi <[email protected]>

* trie: fix test API error

* eth/protocols/snap: fix some further liter issues

* eth/protocols/snap: fix accidental batch reuse

Co-authored-by: Martin Holst Swende <[email protected]>

* p2p/tracker: properly clean up fulfilled requests

* p2p/tracker: only reschedule wake if previous didn't run

* cmd/devp2p, eth/protocols/eth: fix tests + make sanity checks earlier (#22749)

* eth/gasprice: improve stability of estimated price (#22722)

This PR makes the gas price oracle ignore transactions priced at `<=1 wei`.

* tests/fuzzers: crypto/bn256 and crypto/bls12381 tests against gnark-crypto  (#22755)

Add more cross-fuzzers to fuzz bls with gnark versus geth's own bls12-381 library

* les, tests: fix les clientpool (#22756)

* les, tests: fix les clientpool

* tests: disable debug mode

* les: polish code

* eth/protocols/snap: lower the packet size to avoid overloading link

* cmd/devp2p: fix flaky SameRequestID test (#22754)

* trie: remove redundant returns + use stacktrie where applicable (#22760)

* trie: add benchmark for proofless range

* trie: remove unused returns + use stacktrie

* core, eth, ethdb, trie: simplify range proofs

* eth: restore eth_hashrate API endpoint

* catalyst: check if block exists in assemble-block call with unknown parent-hash (#22770)

* add myself as code owner for catalyst (#22778)

* docs: fix docstring on read head block (#22776)

* evm: remove unused errors left after EIP-2315 removal (#22767)

* github: add note about screenshots in issue template (#22764)

* core/types: add license header (#22781)

* core/vm: fix typo in comment (#22785)

* core: remove unused else branch in reorg (#22783)

* core/vm: replace repeated string with variable in tests (#22774)

* core: fix typo in comment (#22773)

* README.md: update commands table, add note about web3.js version (#22748)

* eth/filters: fix comment on PublicFilterAPI timeoutLoop (#22782)

* core/state: remove toAddr helper in tests (#22772)

* core, eth: abort snapshot generation on snap sync and resume later

* eth/protocols/snap: use storage batch, not account batch in st task

* cmd/devp2p: fix flakey tests in CI (#22757)

This PR fixes a couple of issues in the eth test suite that caused flakiness when run in the CI.

* core/vm: clean up contract creation error handling (#22766)

Do not keep separate flag for "max code size exceeded" case, but instead
assign appropriate error for it sooner.

* core/vm: fix interpreter comments (#22797)

* Fix interpreter comment

* Fix comment

* params: remove dependency on crypto (#22788)

* params: remove dependency on crypto

Package params should not depend on package crypto because building
crypto requires cgo.

Since build/ci.go needs package params to get the go-ethereum version
number, C code must be compiled in order to run the build tool, which is
annoying for certain cross-compilation setups.

* params: add SectionHead

* cmd/utils: don't crash on nonexistent datadir (#22738)

* eth: don't print db upgrade warning on db init

* cmd/utils: use eth DNS tree for snap discovery (#22808)

This removes auto-configuration of the snap.*.ethdisco.net DNS discovery tree.
Since measurements have shown that > 75% of nodes in all.*.ethdisco.net support
snap, we have decided to retire the dedicated index for snap and just use the eth
tree instead.

The dial iterators of eth and snap now use the same DNS tree in the default configuration,
so both iterators should use the same DNS discovery client instance. This ensures that
the record cache and rate limit are shared. Records will not be requested multiple times.

While testing the change, I noticed that duplicate DNS requests do happen even
when the client instance is shared. This is because the two iterators request the tree
root, link tree root, and first levels of the tree in lockstep. To avoid this problem, the
change also adds a singleflight.Group instance in the client. When one iterator
attempts to resolve an entry which is already being resolved, the singleflight object
waits for the existing resolve call to finish and returns the entry to both places.

* build: improve cross compilation setup (#22804)

This PR cleans up the CI build system and fixes a couple of issues.

- The go tool launcher code has been moved to internal/build. With the new
  toolchain functions, the environment of the host Go (i.e. the one that built
  ci.go) and the target Go (i.e. the toolchain downloaded by -dlgo) are isolated
  more strictly. This is important to make cross compilation and -dlgo work
  correctly in more cases.
- The -dlgo option now skips the download and uses the host Go if the running Go
  version matches dlgoVersion exactly.
- The 'test' command now supports -dlgo, -cc and -arch. Running unit tests with
  foreign GOARCH is occasionally useful. For example, it can be used to run
  32-bit tests on Windows. It can also be used to run darwin/amd64 tests on
  darwin/arm64 using Rosetta 2.
- The 'aar', 'xcode' and 'xgo' commands now use a slightly different method to
  install external tools. They previously used `go get`, but this comes with the
  annoying side effect of modifying go.mod. They now use `go install` instead,
  which is the recommended way of installing tools without modifying the local
  module.
- The old build warning about outdated Go version has been removed because we're
  much better at keeping backwards compatibility now.

* go.mod: go mod tidy (#22814)

This updates go.mod for the addition of golang.org/x/sync.

* build: fix iOS framework build (#22813)

This fixes a regression introduced in #22804.

* appveyor.yml: upgrade to VisualStudio 2019 image (#22811)

* build: fix windows installer build for NSIS v3.05 (#22821)

With the update to a newer AppVeyor build image, creating the Windows
installer no longer worked because of a string quoting error in EnvVarUpdate.nsh.

This applies the fix recommended in https://stackoverflow.com/questions/62081765.

* cmd/devp2p/internal/ethtest: send simultaneous requests on one connection (#22801)

This changes the SimultaneousRequests test to send the requests from the same
connection, as it doesn't really make sense to test whether a node can respond
to two requests with different request IDs from separate connections.

* params: go-ethereum v1.10.3 stable

* Merge branch 'master' into upgrade/go-ethereum/v1.10.3-2022805130510

* fix merge

* restore geth 1.10.3 modifications

* fix argument

* fix catalyst flag

* fix diff

* fix diff

* fix diff

* Update cmd/geth/chaincmd.go

* fix github action with deprecated ubuntu 18 to 20

Signed-off-by: meows <[email protected]>
Co-authored-by: Martin Holst Swende <[email protected]>
Co-authored-by: Felix Lange <[email protected]>
Co-authored-by: Felföldi Zsolt <[email protected]>
Co-authored-by: Péter Szilágyi <[email protected]>
Co-authored-by: rjl493456442 <[email protected]>
Co-authored-by: Marius van der Wijden <[email protected]>
Co-authored-by: rene <[email protected]>
Co-authored-by: lightclient <[email protected]>
Co-authored-by: Ryan Schneider <[email protected]>
Co-authored-by: michael1011 <[email protected]>
Co-authored-by: ligi <[email protected]>
Co-authored-by: wuff1996 <[email protected]>
Co-authored-by: meowsbits <[email protected]>
Co-authored-by: Martin Redmond <[email protected]>
Co-authored-by: ucwong <[email protected]>
Co-authored-by: jacksoom <[email protected]>
Co-authored-by: Quest Henkart <[email protected]>
Co-authored-by: Sina Mahmoodi <[email protected]>
Co-authored-by: Tobias Hildebrandt <[email protected]>
Co-authored-by: Derek Chiang <[email protected]>
Co-authored-by: MrChico <[email protected]>
Co-authored-by: Chen Quan <[email protected]>
Co-authored-by: Zou Guangxian <[email protected]>
Co-authored-by: AlexSSD7 <[email protected]>
Co-authored-by: nebojsa94 <[email protected]>
Co-authored-by: Edgar Aroutiounian <[email protected]>
Co-authored-by: piersy <[email protected]>
Co-authored-by: AmitBRD <[email protected]>
Co-authored-by: Amit Shah <[email protected]>
Co-authored-by: Peter Simard <[email protected]>
Co-authored-by: Evolution404 <[email protected]>
Co-authored-by: Balaji Shetty Pachai <[email protected]>
Co-authored-by: Mudit Gupta <[email protected]>
Co-authored-by: xD AKA Rapper King Of cn background diablo & revelations <[email protected]>
Co-authored-by: Guillaume Ballet <[email protected]>
Co-authored-by: Mikhail Kalinin <[email protected]>
Co-authored-by: ryanc414 <[email protected]>
Co-authored-by: Nishant Das <[email protected]>
Co-authored-by: Gregory Markou <[email protected]>
Co-authored-by: Gautam Botrel <[email protected]>
Co-authored-by: Diederik Loerakker <[email protected]>
Co-authored-by: aaronbuchwald <[email protected]>
Co-authored-by: Paweł Bylica <[email protected]>
Co-authored-by: baptiste-b-pegasys <[email protected]>
Co-authored-by: Baptiste Boussemart <[email protected]>

Author: 45 people

.github/CODEOWNERS

@@ -9,6 +9,7 @@ cmd/puppeth                     @karalabe
 consensus                       @karalabe
 core/                           @karalabe @holiman @rjl493456442
 eth/                            @karalabe @holiman @rjl493456442
+eth/catalyst/                   @gballet
 graphql/                        @gballet
 les/                            @zsfelfoldi @rjl493456442
 light/                          @zsfelfoldi @rjl493456442

.github/ISSUE_TEMPLATE/bug.md

@@ -26,3 +26,5 @@ Commit hash : (if `develop`)
 ````
 [backtrace]
 ````
+
+When submitting logs: please submit them as text and not screenshots.

Makefile

@@ -31,7 +31,7 @@ android:
 	@echo "Import \"$(GOBIN)/geth.aar\" to use the library."
 	@echo "Import \"$(GOBIN)/geth-sources.jar\" to add javadocs"
 	@echo "For more info see https://stackoverflow.com/questions/20994336/android-studio-how-to-attach-javadoc"
-	
+
 ios:
 	$(GORUN) build/ci.go xcode --local
 	@echo "Done building."
@@ -51,12 +51,11 @@ clean:
 # You need to put $GOBIN (or $GOPATH/bin) in your PATH to use 'go generate'.
 
 devtools:
-	env GOBIN= go get -u golang.org/x/tools/cmd/stringer
-	env GOBIN= go get -u github.com/kevinburke/go-bindata/go-bindata
-	env GOBIN= go get -u github.com/fjl/gencodec
-	env GOBIN= go get -u github.com/golang/protobuf/protoc-gen-go
+	env GOBIN= go install golang.org/x/tools/cmd/stringer@latest
+	env GOBIN= go install github.com/kevinburke/go-bindata/go-bindata@latest
+	env GOBIN= go install github.com/fjl/gencodec@latest
+	env GOBIN= go install github.com/golang/protobuf/protoc-gen-go@latest
 	env GOBIN= go install ./cmd/abigen
-	@type "npm" 2> /dev/null || echo 'Please install node.js and npm'
 	@type "solc" 2> /dev/null || echo 'Please install solc'
 	@type "protoc" 2> /dev/null || echo 'Please install protoc'
 

accounts/accounts.go

@@ -113,7 +113,7 @@ type Wallet interface {
 	SignData(account Account, mimeType string, data []byte) ([]byte, error)
 
 	// SignDataWithPassphrase is identical to SignData, but also takes a password
-	// NOTE: there's an chance that an erroneous call might mistake the two strings, and
+	// NOTE: there's a chance that an erroneous call might mistake the two strings, and
 	// supply password in the mimetype field, or vice versa. Thus, an implementation
 	// should never echo the mimetype or return the mimetype in the error-response
 	SignDataWithPassphrase(account Account, passphrase, mimeType string, data []byte) ([]byte, error)
@@ -127,7 +127,7 @@ type Wallet interface {
 	// a password to decrypt the account, or a PIN code o verify the transaction),
 	// an AuthNeededError instance will be returned, containing infos for the user
 	// about which fields or actions are needed. The user may retry by providing
-	// the needed details via SignHashWithPassphrase, or by other means (e.g. unlock
+	// the needed details via SignTextWithPassphrase, or by other means (e.g. unlock
 	// the account in a keystore).
 	//
 	// This method should return the signature in 'canonical' format, with v 0 or 1

accounts/external/backend.go

@@ -214,6 +214,20 @@ func (api *ExternalSigner) SignTx(account accounts.Account, tx *types.Transactio
 		// Quorum
 		IsPrivate: tx.IsPrivate(),
 	}
+	// We should request the default chain id that we're operating with
+	// (the chain we're executing on)
+	if chainID != nil {
+		args.ChainID = (*hexutil.Big)(chainID)
+	}
+	// However, if the user asked for a particular chain id, then we should
+	// use that instead.
+	if tx.Type() != types.LegacyTxType && tx.ChainId() != nil {
+		args.ChainID = (*hexutil.Big)(tx.ChainId())
+	}
+	if tx.Type() == types.AccessListTxType {
+		accessList := tx.AccessList()
+		args.AccessList = &accessList
+	}
 	var res signTransactionResult
 	if err := api.client.Call(&res, "account_signTransaction", args); err != nil {
 		return nil, err

accounts/url.go

@@ -64,7 +64,7 @@ func (u URL) String() string {
 func (u URL) TerminalString() string {
 	url := u.String()
 	if len(url) > 32 {
-		return url[:31] + "…"
+		return url[:31] + ".."
 	}
 	return url
 }

appveyor.yml

@@ -1,41 +1,29 @@
-os: Visual Studio 2015
-
-# Clone directly into GOPATH.
-clone_folder: C:\gopath\src\github.com\ethereum\go-ethereum
+os: Visual Studio 2019
 clone_depth: 5
 version: "{branch}.{build}"
 environment:
-  global:
-    GO111MODULE: on
-    GOPATH: C:\gopath
-    CC: gcc.exe
   matrix:
+    # We use gcc from MSYS2 because it is the most recent compiler version available on
+    # AppVeyor. Note: gcc.exe only works properly if the corresponding bin/ directory is
+    # contained in PATH.
     - GETH_ARCH: amd64
-      MSYS2_ARCH: x86_64
-      MSYS2_BITS: 64
-      MSYSTEM: MINGW64
-      PATH: C:\msys64\mingw64\bin\;C:\Program Files (x86)\NSIS\;%PATH%
+      GETH_CC: C:\msys64\mingw64\bin\gcc.exe
+      PATH: C:\msys64\mingw64\bin;C:\Program Files (x86)\NSIS\;%PATH%
     - GETH_ARCH: 386
-      MSYS2_ARCH: i686
-      MSYS2_BITS: 32
-      MSYSTEM: MINGW32
-      PATH: C:\msys64\mingw32\bin\;C:\Program Files (x86)\NSIS\;%PATH%
+      GETH_CC: C:\msys64\mingw32\bin\gcc.exe
+      PATH: C:\msys64\mingw32\bin;C:\Program Files (x86)\NSIS\;%PATH%
 
 install:
-  - git submodule update --init
-  - rmdir C:\go /s /q
-  - appveyor DownloadFile https://dl.google.com/go/go1.16.windows-%GETH_ARCH%.zip
-  - 7z x go1.16.windows-%GETH_ARCH%.zip -y -oC:\ > NUL
+  - git submodule update --init --depth 1
   - go version
-  - gcc --version
+  - "%GETH_CC% --version"
 
 build_script:
-  - go run build\ci.go install -dlgo
+  - go run build\ci.go install -dlgo -arch %GETH_ARCH% -cc %GETH_CC%
 
 after_build:
-  - go run build\ci.go archive -type zip -signer WINDOWS_SIGNING_KEY -upload gethstore/builds
-  - go run build\ci.go nsis -signer WINDOWS_SIGNING_KEY -upload gethstore/builds
+  - go run build\ci.go archive -arch %GETH_ARCH% -type zip -signer WINDOWS_SIGNING_KEY -upload gethstore/builds
+  - go run build\ci.go nsis -arch %GETH_ARCH% -signer WINDOWS_SIGNING_KEY -upload gethstore/builds
 
 test_script:
-  - set CGO_ENABLED=1
-  - go run build\ci.go test -coverage
+  - go run build\ci.go test -dlgo -arch %GETH_ARCH% -cc %GETH_CC% -coverage

build/checksums.txt

@@ -1,31 +1,33 @@
 # This file contains sha256 checksums of optional build dependencies.
 
-7688063d55656105898f323d90a79a39c378d86fe89ae192eb3b7fc46347c95a  go1.16.src.tar.gz
-6000a9522975d116bf76044967d7e69e04e982e9625330d9a539a8b45395f9a8  go1.16.darwin-amd64.tar.gz
-ea435a1ac6d497b03e367fdfb74b33e961d813883468080f6e239b3b03bea6aa  go1.16.linux-386.tar.gz
-013a489ebb3e24ef3d915abe5b94c3286c070dfe0818d5bca8108f1d6e8440d2  go1.16.linux-amd64.tar.gz
-3770f7eb22d05e25fbee8fb53c2a4e897da043eb83c69b9a14f8d98562cd8098  go1.16.linux-arm64.tar.gz
-d1d9404b1dbd77afa2bdc70934e10fbfcf7d785c372efc29462bb7d83d0a32fd  go1.16.linux-armv6l.tar.gz
-481492a17d42193d471b93b7a06da3555331bd833b76336afc87be820c48933f  go1.16.windows-386.zip
-5cc88fa506b3d5c453c54c3ea218fc8dd05d7362ae1de15bb67986b72089ce93  go1.16.windows-amd64.zip
-d7d6c70b05a7c2f68b48aab5ab8cb5116b8444c9ddad131673b152e7cff7c726  go1.16.freebsd-386.tar.gz
-40b03216f6945fb6883a50604fc7f409a83f62171607229a9c598e701e684f8a  go1.16.freebsd-amd64.tar.gz
-27a1aaa988e930b7932ce459c8a63ad5b3333b3a06b016d87ff289f2a11aacd6  go1.16.linux-ppc64le.tar.gz
-be4c9e4e2cf058efc4e3eb013a760cb989ddc4362f111950c990d1c63b27ccbe  go1.16.linux-s390x.tar.gz
+b298d29de9236ca47a023e382313bcc2d2eed31dfa706b60a04103ce83a71a25  go1.16.3.src.tar.gz
+6bb1cf421f8abc2a9a4e39140b7397cdae6aca3e8d36dcff39a1a77f4f1170ac  go1.16.3.darwin-amd64.tar.gz
+f4e96bbcd5d2d1942f5b55d9e4ab19564da4fad192012f6d7b0b9b055ba4208f  go1.16.3.darwin-arm64.tar.gz
+48b2d1481db756c88c18b1f064dbfc3e265ce4a775a23177ca17e25d13a24c5d  go1.16.3.linux-386.tar.gz
+951a3c7c6ce4e56ad883f97d9db74d3d6d80d5fec77455c6ada6c1f7ac4776d2  go1.16.3.linux-amd64.tar.gz
+566b1d6f17d2bc4ad5f81486f0df44f3088c3ed47a3bec4099d8ed9939e90d5d  go1.16.3.linux-arm64.tar.gz
+0dae30385e3564a557dac7f12a63eedc73543e6da0f6017990e214ce8cc8797c  go1.16.3.linux-armv6l.tar.gz
+a3c16e1531bf9726f47911c4a9ed7cb665a6207a51c44f10ebad4db63b4bcc5a  go1.16.3.windows-386.zip
+a4400345135b36cb7942e52bbaf978b66814738b855eeff8de879a09fd99de7f  go1.16.3.windows-amd64.zip
+31ecd11d497684fa8b0f01ba784590c4c760943665fdc4fe0adaa1405c71736c  go1.16.3.freebsd-386.tar.gz
+ffbd920b309e62e807457b11d80e8c17fefe3ef6de423aaba4b1e270b2ca4c3d  go1.16.3.freebsd-amd64.tar.gz
+5eb046bbbbc7fe2591846a4303884cb5a01abb903e3e61e33459affe7874e811  go1.16.3.linux-ppc64le.tar.gz
+3e8bd7bde533a73fd6fa75b5288678ef397e76c198cfb26b8ae086035383b1cf  go1.16.3.linux-s390x.tar.gz
 
-d998a84eea42f2271aca792a7b027ca5c1edfcba229e8e5a844c9ac3f336df35  golangci-lint-1.27.0-linux-armv7.tar.gz
-bf781f05b0d393b4bf0a327d9e62926949a4f14d7774d950c4e009fc766ed1d4  golangci-lint.exe-1.27.0-windows-amd64.zip
-bf781f05b0d393b4bf0a327d9e62926949a4f14d7774d950c4e009fc766ed1d4  golangci-lint-1.27.0-windows-amd64.zip
-0e2a57d6ba709440d3ed018ef1037465fa010ed02595829092860e5cf863042e  golangci-lint-1.27.0-freebsd-386.tar.gz
-90205fc42ab5ed0096413e790d88ac9b4ed60f4c47e576d13dc0660f7ed4b013  golangci-lint-1.27.0-linux-arm64.tar.gz
-8d345e4e88520e21c113d81978e89ad77fc5b13bfdf20e5bca86b83fc4261272  golangci-lint-1.27.0-linux-amd64.tar.gz
-cc619634a77f18dc73df2a0725be13116d64328dc35131ca1737a850d6f76a59  golangci-lint-1.27.0-freebsd-armv7.tar.gz
-fe683583cfc9eeec83e498c0d6159d87b5e1919dbe4b6c3b3913089642906069  golangci-lint-1.27.0-linux-s390x.tar.gz
-058f5579bee75bdaacbaf75b75e1369f7ad877fd8b3b145aed17a17545de913e  golangci-lint-1.27.0-freebsd-armv6.tar.gz
-38e1e3dadbe3f56ab62b4de82ee0b88e8fad966d8dfd740a26ef94c2edef9818  golangci-lint-1.27.0-linux-armv6.tar.gz
-071b34af5516f4e1ddcaea6011e18208f4f043e1af8ba21eeccad4585cb3d095  golangci-lint.exe-1.27.0-windows-386.zip
-071b34af5516f4e1ddcaea6011e18208f4f043e1af8ba21eeccad4585cb3d095  golangci-lint-1.27.0-windows-386.zip
-5f37e2b33914ecddb7cad38186ef4ec61d88172fc04f930fa0267c91151ff306  golangci-lint-1.27.0-linux-386.tar.gz
-4d94cfb51fdebeb205f1d5a349ac2b683c30591c5150708073c1c329e15965f0  golangci-lint-1.27.0-freebsd-amd64.tar.gz
-52572ba8ff07d5169c2365d3de3fec26dc55a97522094d13d1596199580fa281  golangci-lint-1.27.0-linux-ppc64le.tar.gz
-3fb1a1683a29c6c0a8cd76135f62b606fbdd538d5a7aeab94af1af70ffdc2fd4  golangci-lint-1.27.0-darwin-amd64.tar.gz
+7e9a47ab540aa3e8472fbf8120d28bed3b9d9cf625b955818e8bc69628d7187c  golangci-lint-1.39.0-darwin-amd64.tar.gz
+574daa2c9c299b01672a6daeb1873b5f12e413cdb6dc0e30f2ff163956778064  golangci-lint-1.39.0-darwin-arm64.tar.gz
+6225f7014987324ab78e9b511f294e3f25be013728283c33918c67c8576d543e  golangci-lint-1.39.0-freebsd-386.tar.gz
+6b3e76e1e5eaf0159411c8e2727f8d533989d3bb19f10e9caa6e0b9619ee267d  golangci-lint-1.39.0-freebsd-amd64.tar.gz
+a301cacfff87ed9b00313d95278533c25a4527a06b040a17d969b4b7e1b8a90d  golangci-lint-1.39.0-freebsd-armv7.tar.gz
+25bfd96a29c3112f508d5e4fc860dbad7afce657233c343acfa20715717d51e7  golangci-lint-1.39.0-freebsd-armv6.tar.gz
+9687e4ff15545cfc722b0e46107a94195166a505023b48a316579af25ad09505  golangci-lint-1.39.0-linux-armv7.tar.gz
+a7fa7ab2bfc99cbe5e5bcbf5684f5a997f920afbbe2f253d2feb1001d5e3c8b3  golangci-lint-1.39.0-linux-armv6.tar.gz
+c8f9634115beddb4ed9129c1f7ecd4c97c99d07aeef33e3707234097eeb51b7b  golangci-lint-1.39.0-linux-mips64le.tar.gz
+d1234c213b74751f1af413302dde0e9a6d4d29aecef034af7abb07dc1b6e887f  golangci-lint-1.39.0-linux-arm64.tar.gz
+df25d9267168323b163147acb823ab0215a8a3bb6898a4a9320afdfedde66817  golangci-lint-1.39.0-linux-386.tar.gz
+1767e75fba357b7651b1a796d38453558f371c60af805505ec99e166908c04b5  golangci-lint-1.39.0-linux-ppc64le.tar.gz
+25fd75bf3186b3d930ecae10185689968fd18fd8fa6f9f555d6beb04348c20f6  golangci-lint-1.39.0-linux-s390x.tar.gz
+3a73aa7468087caa62673c8adea99b4e4dff846dc72707222db85f8679b40cbf  golangci-lint-1.39.0-linux-amd64.tar.gz
+578caceccf81739bda67dbfec52816709d03608c6878888ecdc0e186a094a41b  golangci-lint-1.39.0-linux-mips64.tar.gz
+494b66ba0e32c8ddf6c4f6b1d05729b110900f6017eda943057e43598c17d7a8  golangci-lint-1.39.0-windows-386.zip
+52ec2e13a3cbb47147244dff8cfc35103563deb76e0459133058086fc35fb2c7  golangci-lint-1.39.0-windows-amd64.zip