[Keyboard] Add ADM42 Keyboard

keyboards/adm42/adm42.c

@@ -0,0 +1,17 @@
+/* Copyright 2020-2022 Lorenzo Leonini
+ * SPDX-License-Identifier: GPL-2.0-only
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "adm42.h"

keyboards/adm42/adm42.h

@@ -0,0 +1,31 @@
+/* Copyright 2020-2022 Lorenzo Leonini
+ * SPDX-License-Identifier: GPL-2.0-only
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_adm42_3x12_6( \
+    K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, \
+    K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, \
+    K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, \
+                      K404, K405, K406, K407, K408, K409  \
+) { \
+    { K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112  }, \
+    { K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212  }, \
+    { K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312  }, \
+    { KC_NO, KC_NO, KC_NO, K404,  K405,  K407,  K406,  K408,  K409,  KC_NO, KC_NO, KC_NO }  \
+}

keyboards/adm42/config.h

@@ -0,0 +1,93 @@
+/* Copyright 2020-2022 Lorenzo Leonini
+ * SPDX-License-Identifier: GPL-2.0-only
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* Microchip ADM42 sublicensing */
+#define VENDOR_ID				0x04D8
+#define PRODUCT_ID			0xE873
+
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Lorenzo Leonini
+#define PRODUCT         ADM42
+
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+#define DIODE_DIRECTION ROW2COL
+
+#define HOLD_ON_OTHER_KEY_PRESS_PER_KEY
+#define TAPPING_FORCE_HOLD_PER_KEY
+#define IGNORE_MOD_TAP_INTERRUPT_PER_KEY
+#define TAPPING_TERM 200
+
+#define USB_POLLING_INTERVAL_MS 1
+#define TAP_CODE_DELAY 1
+#define DEBOUNCE 10
+
+#if defined(CONSOLE_ENABLE)
+	#define DEBUG_MATRIX_SCAN_RATE
+#endif
+
+// Memory saver
+#define NO_ACTION_ONE_SHOT
+#if !defined(CONSOLE_ENABLE)
+	#if !defined(NO_DEBUG)
+		#define NO_DEBUG
+	#endif
+	#if !defined(NO_PRINT)
+		#define NO_PRINT
+	#endif
+#endif
+
+#define MATRIX_COL_PINS { C6, B6, B5, B4, D7, D6, F0, F1, F4, F5, F6, F7 }
+#define MATRIX_ROW_PINS { C7, D5, D3, D2 }
+
+#define QMK_LED E6
+
+#define RGB_DI_PIN B7
+
+#define DRIVER_LED_TOTAL 42
+#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 170
+#define RGB_MATRIX_CENTER { 112, 32 }
+#define RGB_DISABLE_WHEN_USB_SUSPENDED
+#define RGB_MATRIX_LED_PROCESS_LIMIT 21
+#define RGB_MATRIX_LED_FLUSH_LIMIT 16
+#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
+#define RGB_MATRIX_TYPING_HEATMAP_DECREASE_DELAY_MS 20
+#define RGB_MATRIX_KEYPRESSES
+#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+#define RGB_MATRIX_SAT_STEP 24
+#define RGB_MATRIX_HUE_STEP 8
+#define RGB_MATRIX_VAL_STEP 16
+#define RGB_MATRIX_SPD_STEP 16
+
+#define ENABLE_RGB_MATRIX_BREATHING
+#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#define ENABLE_RGBLIGHT_MODE_STATIC_LIGHT
+#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
+#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL
+#define ENABLE_RGB_MATRIX_TYPING_HEATMAP
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
+#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
+#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
+#define ENABLE_RGB_MATRIX_PIXEL_RAIN
+#define ENABLE_RGB_MATRIX_DIGITAL_RAIN
+#define ENABLE_RGB_MATRIX_BAND_VAL
+#define ENABLE_RGB_MATRIX_SPLASH

keyboards/adm42/readme.md

@@ -0,0 +1,27 @@
+# ADM42
+
+![ADM42](https://adm42.dev/images/adm42.jpg)
+
+A compact ergonomic 40% ortholinear keyboard. [More info on ADM42.dev](https://adm42.dev)
+
+* Keyboard Maintainer: [Lorenzo Leonini](https://github.com/lleonini)  
+* Hardware Supported: ADM42
+* Hardware Availability: [Shop](https://shop.adm42.dev)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make adm42:default
+
+Flashing example for this keyboard:
+
+    make adm42:default:dfu
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (the top left key) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB